I ride a 06 cbr600rr and it is definitely recommended that you change the crush washer atleast every 2nd oil change. It's not a normal washer, it is softer and flattens when used! I hope you never get a oil leak. Also you can loosen the radiator reservoir, in order to get the oil filter out easier.

Just use Motul or other high quality oil and NEVER start the engine without oil.

There is a space between the headers right above the drain bolt you can remove the oil filter from there instead of squeezing it,i prefer to remove the coolant reservoir tho its just one bolt,Cheers nice vid.

Pulled this up in Canadian tire for my new CBR600, grabbed everything 🤙🏻

That mustache is classy

The coolant bottle comes off with one bolt and requires a 10mm socket, don't force any thing. AND DONT START YOU'RE BIKE WITHOUT OIL. WOW. ITS GOOD PRACTICE 👍

Good vid man but I would NEVER start up the engine with the crankcase 99% empty.... Bad Idea. Imo

Nice XC in your garage as well 👍🏼

Nice vid and stache bud

Take of the reservoir you need to clean around the filter for loose dirt before you take it off that can eazy fall in to the engine when you take filter off

Thank u very much for sharing the knowledge!!

great vid thanks bro!

This guy... just started a MOTOR with no oil.... oh... my... lord... ppl please do not do this!!

Do you did a great job on the video. Thanks !!

Great video man thanks for the tips that was awesome!

Maybe you got taught the wrong way but your meant to tap the starter button a few times to make the oil pump push some extra oil out. I would not recommend turning it on due to oil starvation of vital parts. Next time take oil filter off as well to get even more oil out but again do not start it it’s not necessary just tap the starter a few times it’s far less risky and in any case you will never truly get it all the old oil out so it’s pointless.

Thank you!

Thanks for the info brotha

Mad helpful thank you 🙏🏽

Thanks!

Nice and simple 👍👍👍

DO NOT start you engine without oil

Good idea with the tinfoil, but dude, just unscrew one bolt of coolant reservuar and it will come out easy. It's kinda stupid to damage reservuar plastic...

الله ينور عليك

Will this work on a 2006 CBR600

so how do you check the oil level......you mentioned checking it, but i didnt see you do it.

Will this work on a 04 CBR 600RR? Is it the same?

Can you send the link for the Honda oil filter removal tool?

How to check the oil level on the Honda CBR 600rr 2004 model??

Where do you check the oil level.

I used this oil and filter like you said but after about a minute in idle smoke started coming out from the engine bay!! I’m worried bro you know why that can be????!!

MOTUL !!!

Another Rotella oil user...Riders don't let other riders Use Rotella. You can spout off all the scientific mumbo jumbo you want, but when it comes to Revs meeting the road, Rotella doesn't hold up, it's why your Rotella Oil is black after only 500 miles of hard riding. It breaks down much to fast under the extreme heat of constant 15k RPM's. It's why the AMA doesn't allow it on any track period. The how how to part was good, except it takes 30 extra seconds to take off the Coolant reservoir, so you don't damage it, it's pretty thin plastic. Either grow that thing or shave it off :-)

That’s the wrong oil bro 10w40 it’s the one do you Need 🥲

MARIO

HP4 IS TJE BEST OIL FOR YOUR BIKE DONT GET SOMETHING CHEAP THAYS GONNA MESS UP THE ENGINE. MOTOR OIL IS DIFFERENT FROM ENGINE OIL FOR MOTOCYCLE. DO YOUR RESEARCH PEOPLE. YOU GOT A WET CLUTCH THAT NEEDS THE RIGHT OIL.