Great video, thanks. Tools, torque specs, and parts required: Torx T40, T30, 6mm Allen/hex (not 9mm as mentioned in video). Parts (if you dont buy the oil filter kit) : Oil filter - 420956124 (Skidoo) *or* 030441 (Kimpex) Oil Filter O-ring 420230920 Washer #1 420250640 Washer #2 420950141 3.3-3.5L of 0w-40 oil (I use Mobil 1 synthetic) Torque Specs: Oil Filter Cover (3 torx bolts) 7.5 ft lb Drain plugs (1 torx 1 hex) 15 ft lb Also best to open/loosen the dip tube/fill before draining.

you dont have to take that plate off, just one bolt off and rotate the plate with the other bolt to get it out of the way. just an FYI

I pull the oil drains and with them open turn the motor over by grabbing the clutch with the tether off and kill off and turn it over a dozen times it will help pull the oil out of the filter housing so it's less of a mess when pulling the filter.and after changing oil and filter before starting it I turn the motor over again by hand to get oil moving.prob not needed but that's what I did when I got my first sea Doo and do it to my sled

wow i learned how to change my engine oil on my 600ace lasy year after 9yrs without changing the engine oil baha learned alot from youtube videos how to change my oils on my skidoo should do one on how to change your spark plug thats one thing i cant figure out

Très bien expliqué. S'exprime très bien. J'ai tout compris même si l'anglais n'est pas ma première langue.

Great detail on this process thanks

Great Video, you saved me a lot of time.

T30 for cover, after. _T40 for the two bolts (2020-2021 model) oil change

Nice video, you must have read the Allen key upside down for drain plug it is a 6mm not 9 mm.

Not a trick question. What is a 9 mm upside down? It is a 6 mm to open a drain plug.

Don't torque does 2 engine pan plugs to 20 nm as the manual says, risk of destroying the threads. 15 nm max torque on both om then!

Quelle est le torque qu’il faut serré les bolts?

viens just dachete la nouvelle expedition 900 turbo r.......ces tu pareil?

Thanx dude👍

Where did you get the license registration numbers..? Are they hollow or color matched..?

My oil seems high after the change what do I do? I ran it 2 minutes before oil change then drained and put the contents on the package.

This is a great video. Did you need Ti raise the sled to drain oil? If so how do you raise it?

How are those screw in studs holding up?

The welded bracket on my exhaust blocks the oil filter. What do I do?

What are the toque specs

What oil change kit do you use

great video! thank you ,

Ou se trouve l'ordinateur du moteur 900 ice

What are the torque specs please or where do I find them please?