HOW TO do an OIL CHANGE on the 2018+ Goldwing | DCT Filter too!
Рет қаралды 8,752
Күн бұрынMy Goldwing hit 20K miles, time for an oil change! This How To video shows how I change the oil and both filters (engine + DCT filter) on my 2018 Goldwing. I end the motovlog by doing a DCT Initialization right after the fresh oil change.
I'm not a mechanic, but I do play one on TV. Do you do your own work on your bike?
Please comment down below, consider subscribing to my motovlog channel, and thanks for watching!
Chapters:
00:00 Intro
00:34 Draining the Oil
06:16 Remove Engine Oil Filter
07:57 Reinstalling the Drain Plugs
08:58 Reinstalling the Oil Filter
10:05 Changing the DCT Filter
15:23 Adding New Oil
16:50 DCT Initialization
20:00 Outro
__________
BIKE: 2018 Honda Goldwing DCT Tour
HONDA GOLDWING ACCESSORIES:
Ciro Big Cup Holder: amzn.to/2QCeLKp
Ciro Handlbar Mount: amzn.to/2QSxamH
Show Chrome Fork LED Lights: amzn.to/2Ua2vD3
Show Chrome Saddlebag LED Lights: amzn.to/2vFozft
Trunk & Saddlebag Lamps: amzn.to/2QzG2x1
Bingfu Fakra Antenna Adapter: amzn.to/3dlz2xJ
Marine Flexible Antenna: amzn.to/2QDQofA
Goldstrike Tie Down Brackets: amzn.to/2xm7WWz
Goldstrike Passenger Armrests: amzn.to/2WzVIV1
RIDING GEAR:
Bell Mag 9 Helmet: amzn.to/3bmBq5l
Alpinestars Andes v2 Boots: amzn.to/3a9LiQ0
MOTOVLOG SETUP:
GoPro Hero 8 Black: amzn.to/2QDoU9K
GoPro Hero 7 Black: amzn.com/B07GDGZCCH/
GoPro Accessory Kit: amzn.to/2WH2ZCF
Ball Mount for Handlebar: www.amazon.com/gp/product/B00...
__________
ABOUT ME:
My name is Mengy and this is my motovlog channel, Moto Mengy. I plan to upload a Goldwing motovlog every Sunday. I ride a 2018 Honda Goldwing DCT Tour but I rode Harley Davidson's for 25+ years before. I'm motovlogging with a GoPro Hero 8 Black mounted to a Bell Mag 9 open face helmet, no external mic! To me riding is wind therapy.
My goal for the channel is to motovlog Pennsylvania country roads while also motovlog exploring around America. I'll also talk about biker topics and such, probably test ride a few other motorcycles, and will definitely get lost and accidentally wind up on unpaved roads along the way.
Please SUBSCRIBE if you like my motovlog channel and LIKE any videos you enjoy! Thanks!!!
SOCIAL:
Instagram - / motomengy
Facebook - / motomengy
#motovlog #motovlogger #goldwing
@gavinlanda1109 Жыл бұрын
I’m looking into getting a goldwing and I like to do my own maintenance. This video was fantastic; helped me understand the bike a lot more. Thank you for sharing your knowledge for newbies!
@MotoMengy Жыл бұрын
Glad it was helpful! Oil changes aren't bad on the Wing at all, just takes a bit of time.
@lonniecross4698 2 жыл бұрын
As far as the crush washers go, after 115K miles my 2015 Yamaha FJ-09 still has its original crush washer. I'm cheap and it still works. Thanks for the videos. They've helped me in my decision to buy a Goldwing.
@MotoMengy 2 жыл бұрын
Thanks! I don't think you'll regret buying the new Goldwing, but make sure to test ride one with the DCT first before buying just to see if you like it!
@alp3781 2 жыл бұрын
Sweet videos for the new riders. A small note: the DCT initialization is not only cause you just put fresh oil, it's also mating the new oil with the wear of the dual clutches. I call it a perfect kiss till the next oil change. Moreover, get yourself a shallow oil pan from Amazon.
@MotoMengy 2 жыл бұрын
Yeah, a shallow oil pan is on my list of things to buy this winter.
@lu-annwinsor7890 Жыл бұрын
Great video! You did a super job with all the explaination. Had no problem doing this for my first time. Thanks! Jim
@MotoMengy Жыл бұрын
That's great, glad I helped Lu-Ann!
@samiamplonski 2 жыл бұрын
Fantastic video! Thanks for making a quality instructional video! You are more of a mechanic than you think!
@MotoMengy 2 жыл бұрын
Wow, thanks, glad you liked it! 😀
@PaulsMotoZen 2 жыл бұрын
Watching this had my OCD going into overtime. I just wanted to take a wire brush to everything to clean the dirt off.
@MotoMengy 2 жыл бұрын
My bike needs a good detailing. Thankfully winter is coming so I'll have the time to do it!
@DavidSmith-fw6uj 2 жыл бұрын
LOVE FROM DEKALB MISSISSIPPI USA 🇺🇸
@MotoMengy 2 жыл бұрын
Thanks David!
@freerider7064 2 жыл бұрын
Great videos and you have a great personality. Thanks pal!
@MotoMengy 2 жыл бұрын
I appreciate that!
@Hi.Tech.Redneck 2 жыл бұрын
I’m debating about getting a DCT for my next bike . Wayyyyy different than my GL1500 !!
@MotoMengy 2 жыл бұрын
There isn't anything like the Honda DCT in the motorcycle market. It's awesome, yet it's not for everyone either. I love it myself!
@goldwingmoments 2 жыл бұрын
Thanks. I have the M model so there is less to be done. Keep up the vids.
@MotoMengy 2 жыл бұрын
Yes you should have one less filter to change out! 😁
@reyd8609 2 жыл бұрын
it's not a beamer...it's a Goldwing! .... that made me laugh lol ! .... nice bonus the trans initialization. Thanks for the geat video!
@MotoMengy 2 жыл бұрын
I think a lot of riders still don't know the Goldwing got updated to a new design!
@RideAboutNow 2 жыл бұрын
Nice video, you made the oil change on this Beamer look easy lol.
@MotoMengy 2 жыл бұрын
I've never owned a BMW, are oil changes hard on them?
@RideAboutNow 2 жыл бұрын
@@MotoMengy I had a bmw f800gt and that was easy but I'm sure bugger sport touring bikes with more fairings are a bit difficult. Main thing is the oil reset.
@roadglide Жыл бұрын
Thank you Mengy!
@MotoMengy Жыл бұрын
My pleasure!
@roadglide Жыл бұрын
FYI-You can buy blue or black neoprene gloves 500-100 real cheap. Also now that you’re here. Just a reminder. A belly pan would be a good thing.
@PSPTommyG 2 жыл бұрын
What ?? No CHROME under there like a Harley??? 😲😅😂😂 I learned something new about the DCT Initialization ! Great job on the Wing oil change! 💪💪👏👏
@MotoMengy 2 жыл бұрын
Glad you liked it!
@mattyb7736 3 ай бұрын
Wing owners don't need to compensate for anything by adding chrome 😂
@PSPTommyG 3 ай бұрын
@@mattyb7736 TRUE THAT!!
@davidclements9025 Жыл бұрын
Home Depot sells a good shallow drain pan
@MotoMengy Жыл бұрын
Yeah, I need to get one, my old drain pan is irksome to use.
@loganmason0201 Жыл бұрын
Thanks
@MotoMengy Жыл бұрын
You are welcome Logan!
@dogbone1358 2 жыл бұрын
I assume you warmed the engine up before changing the oil and filters. I’ve been using cheap aluminum pans from the dollar store. They’re big enough and low enough to allow access to the drain plugs and not get oil all over the place. After changing the oil & filters I run the clutch initialization. It seems to run better that way. I ran across a thread somewhere that recommended an alternate O ring that fits better and lessens the chance of binding/pinching. (learned you do the initialization also 👍)
@MotoMengy 2 жыл бұрын
Yep, I always warm the bike up first. And yes there is an alternate O-ring part which seems to work better, but mine is still good so I'll keep using it for now.
@RanGer-498 2 жыл бұрын
Mine was a PITA..none of my oil filter wrenches worked the dealer didnt have any kits in stock or caps, i had to try every single cap at auto parts stores till i found one that worked .
@MotoMengy 2 жыл бұрын
I just use an old clamp style filter wrench. It isn't ideal but it works with a bit of finesse.
@rickyrichreacts9667 2 жыл бұрын
*HEY GUYS, I NEED SOME HELP!* I changed my oil and oil filter yesterday on my 2011 kawasaki ninja 250 and when I went to tight the filter cover and oil filter mounting bolt, I broke the filter cover.. It's in pieces and I've been searching all over to get a replacement but where's a good place to order one? Or could I use another oil filter cover at maybe a local hardware or bike shop??
@MotoMengy 2 жыл бұрын
No idea, I've never had a Ninja. Any Kawasaki dealer should be able to get the cover for you I'd think?
@mobleyjake01lb 2 жыл бұрын
Need to get a H-D oil pan it low with more room to work.
@MotoMengy 2 жыл бұрын
Yep, that's actually what I plan to buy this winter!
@darrelljones2650 Жыл бұрын
What size is the crush washers and during the DCT initialization you showed DDN.., what do we do with that? Thanks
@MotoMengy Жыл бұрын
I'm not sure offhand what size the washers are, the Honda dealer just gave me the correct ones. The DDNDN is the code you key in using the manual shift pad, D = Drive and N = Neutral.
@darrelljones2650 Жыл бұрын
@@MotoMengy Thanks
@ckholiness 3 ай бұрын
What oil are you using 5qt?
@MotoMengy 3 ай бұрын
Yeah the 5qt Honda GN4 oil. It's what the manual recommends and it sells for a good price from my local Honda dealers.
@seatime674 6 ай бұрын
That oil isn't synthetic which it must be
@MotoMengy 4 ай бұрын
It's the recommended Honda oil, I just use what the dealer, owner and service manual say to use.
@seatime674 4 ай бұрын
@@MotoMengy That's fine but use the Honda Synthetic or Motul Synthetic, the Motul will quiet the downshifts and shifts more,, it's just an unwritten law..
@MotoMengy 4 ай бұрын
Interesting@@seatime674 , I'll have to try that next oil change!
@seatime674 4 ай бұрын
@@MotoMengy People have went from the Honda oil to the Motul 7100 synthetic and said it was a massive difference in shifting
@balmoralpjk 2 жыл бұрын
👎👎👎👎👎👎👎👎
@MotoMengy 2 жыл бұрын
Sorry Samantha, I don't normally wear my chaps when I work on my bike!
WingStuff
Рет қаралды 71 М.
ТВ3 - сериалы и шоу
Рет қаралды 2,2 МЛН
The Engineers Post
Рет қаралды 4,1 МЛН