How to do watch timing adjustment

How to do watch timing adjustment - regulation.

Рет қаралды 533,698

9 жыл бұрын

A video on how to adjust the timing regulation of a automatic wrist watch. Carried out on a Seiko 5. The cheapest bargain high end (ticks all the boxes of being high end) watch you can get for under $100.
~-~~-~~~-~~-~
Please watch: "Dell XPS 13 Kaby Lake REVIEW 9360 Simply the Best"
• Dell XPS 13 Kaby Lake ...
~-~~-~~~-~~-~

Пікірлер: 309

@mikeseeck8479 4 жыл бұрын

One of the best no BS videos on this particular topic. Takes away the fear from most people to open up their watch and doing minor corrections.

@TallyHoTech 4 жыл бұрын

Woof

@UnderPresser 6 ай бұрын

"No BS video"? What on EARTH are you talking about?? The guy took literally five seconds worth of the video right at the end to show it actually being done, supposedly, and i didn't see a single thing that was moved or adjusted in the slightest at all. This was entirely useless. I mean, the guy didnt even perform an adjustment, and you call this a "no-BS video? Huh?

@DefNotABotBeepBoop 2 ай бұрын

Is that a joke? I'm over halfway through and he's literally said nothing yet lol I'm actually pissed

@captmick2278 4 жыл бұрын

Thank you so much for taking the time to make this video. You probably saved me +/-$100.00 USD or so for not having to send my watch in for an overhaul. Cheers Capt. M. B. Miller

@JimProng 7 жыл бұрын

I had a new Seiko 5 which was running about six seconds a day slow. I thought I can do better than that. I just didn't realise how fine the adjustment is. First attempt was gaining a couple of minutes a day, second attempt loosing about thirty seconds a day, after several goes and by more luck than judgement, I've got it to less than two seconds a day. On the last couple of adjustments I just put pressure on the lever and couldn't tell if it had moved or not, but it must have as the timekeeping got better. One thing I've learned is, I'm not a watchmaker. :-)

@TallyHoTech 7 жыл бұрын

+Jim Prong Well done :)

@waltrmitty 6 жыл бұрын

same here, Seiko 5, 4 tries, now within 2 secs @ day. this is well within the range from which i can store the watch overnight and bring it back to near zero by the morning. sweeet!

@Hannibalate 5 жыл бұрын

Jim Prong ok

@anonanon2160 5 жыл бұрын

Thanks to the OP for the video, which I know is an older one. I have a similar story. I had a spot on diver and did something I've never done while putting on my watch in 40 years... It slipped and I dropped in three feet onto my dressing room floor. I was really mad at myself for being a ham fisted idiot and my watch adjusted itself to -5 SPD. Still not bad but my stupidity bugged me (plus these are expensive divers we are told can hold up to diving, snorkling, doing scuba and the rest of it and shouldn't be that easy to put out the movement). So I had the tools to regulate the watch but not to measure the results with a timegrapher. This video gave me the basics and I had a go. Trial and error and luck. The regulator pointer was super sensitive and I ping ponged between 20 seconds ahead an hour to the same behind before making tiny tiny tiny naked to the eye adjustments to the regulator. So with patience and a great deal of luck its now back spot on. So, at the end of this my advise is to move the pointer as small as possible. You may not even see how far you have moved it but it will be worth it.

@kellykitkat40 5 жыл бұрын

If your watch is running 6 seconds slow a day, does that mean that on the dawn of the third day, it will be 12 seconds behind ?

@CLief-gs5jr 7 жыл бұрын

Hi, your video allowed me to correct my Jargar simple A458 movement from +12 seconds per hour inaccuracy to about +1 sec per hour. Thanks so much! Stephen

@TallyHoTech 7 жыл бұрын

+Chaviva Lief Awesome ;) Nice watch

@jessealvarez779 7 жыл бұрын

Great video sir, thank you! Very simple yet informative, as were your replies to the questions posted in the comments section. You likely saved my hundreds of dollars on my vintage Seiko 5. Thanks again from Jesse in the USA!

@Donnybrook10 Жыл бұрын

the other lever is for beat error which regulates the time between beats. There's no way to accurately know if your watch is out of beat unless you have a timegrapher...or a very good ear. Beat error is the difference in time it takes for the balance to swing one way compared to the other. In a perfectly tuned watch with no beat error the amount to time between beats will be exactly equal. This essentially twists the hairspring collet on the balance staff.

@nikanora97 2 жыл бұрын

Excellent tutorial. I have an old, mint condition raketa watch that is 4 minutes slow a day. So this one is much needed, gonna fix it soon and update the results later!

@SupportHomelandDivision 2 жыл бұрын

Thank you for this! My time was off on mine, now I will be able to adjust it. I will be taking my time correcting it. Currently it’s time advances by +3 every 12 hours. But I am going to work to adjust it over the next few months till I only have to correct it once a year. Thank you again.

@Logan.Ninefingers 6 жыл бұрын

Thank you. I am actually trying to adjust the exact same watch you have in the video. I wanted to know how far to move the pointer but I can see from the comments that it has to be tiny adjustments.

@johnboyd7158 11 ай бұрын

absolutely perfect. I have a Seiko 5 SRPE57 that is running very fast. all I needed was the information regarding what to move and which way to move. it. This video answered it exactly and clearly. My Thanks

@KarbineKyle 3 жыл бұрын

I have a really nice Soviet ЧЧЗ "Кама" (Vostok, Chistopol Watch Factory, 3Q-1957) radium dial wristwatch, and it's manual. I couldn't find any videos on how to adjust it. The balance wheel also would stop, unless it was upside down or in constant motion. I found a tiny rotating lever and a tiny screw. I took my chances, and moved the lever, but not the screw. My watch has been running again! First, the stem came out, which I fixed. The retaining screw was loose. Now, I adjusted this tiny lever. I don't know if it's on time yet, but it's running again! Thank you very much! 👍

@MrNoobed 2 жыл бұрын

Thanks, gonna try this soon. I got a beat tracker app for my phone too to confirm my notes. I'm running 200 seconds/day fast now after a few weeks of wear-in. Hopefully I can use my phone to check my adjustments and get it better first try. Thanks for the tip of not adjusting the big one and confirming this was exactly what those marks were for.

@microusb42069 3 жыл бұрын

Bruh. Thank you so much. Your video was straight forward and just simple to comprehend. I'm never sure of myself with repairs of anything but this video made it very clear that this was an easy adjustment to do as long as youre careful and pay attention. Now hopefully my Undone is slightly more accurate and I didn't have to take it to a repair shop and pay for it. Much appreciated!

@jonasdktube 5 жыл бұрын

Nice and easy! Thanks for keeping it simple! Best how to I could find

@TallyHoTech 5 жыл бұрын

Wooooo

@kingarthur5877 7 жыл бұрын

Thank you for the uploads. Very clear advice and great quality.

@TallyHoTech 7 жыл бұрын

+king arthur Welcme and thanks for watching

@naolrenel Жыл бұрын

I tried now because my seiko 5 watch every 2days they can late 1, minute

@serdalkaptan 7 ай бұрын

Thank you very much for this very short, very clear, straight to the point video!

@wishbone57 7 жыл бұрын

Cheers mate - very helpful and easy to follow. I have a Seiko, very cool watch which is now keeping perfect time!

@TallyHoTech 7 жыл бұрын

+wishbone57 Awesome Thanks for watching

@MrDoggerDog 5 жыл бұрын

Bought a used SNZG13 (great watch, BTW), and it was running way too fast (+2.5 mins/day), and probably the reason the former owner returned it. This video really helped! Man, the slightest touch really causes the watch to increase or decrease. So be aware of that.

@tellitlikeitis-rg4ny Жыл бұрын

Watches run fast when they need demagnetising

@JasZg 3 жыл бұрын

Good video.A nice and simple explanation, straight to the point.

@budthecyborg4575 4 жыл бұрын

Thank you so much for giving us a video with a real watch!

@ussling 4 жыл бұрын

Good video. I did this to my Vostok Komandirskie mechanical wind-up watch and got it to within a few seconds a day accuracy. It took many tries because the adjustment has to be in microns, which I could not do.

@mattr3632 3 жыл бұрын

Thanks again for the video. After getting a decent set of watch tools, and a few adjustments, my Seiko 5 is now keeping good time. Just under a minute fast each week, but much better than 4-6 minutes slow and then fast and then slow again!

@LadyElsie Жыл бұрын

the photos really help a lot, it made the explanation very clear. thanks so much

@Soggz7785 3 жыл бұрын

Hi. I’ve just got into watches. That was a great piece of info, as I am about to attempt the very same thing myself. Thanks.

@skycaptain4911 4 жыл бұрын

Great video. Spot on. Really helped me to try and regulate a Seiko 6r15c. Cheers

@tahraqapie4783 6 жыл бұрын

Thank you for teaching us this, and for your efforts as well.

@TallyHoTech 6 жыл бұрын

Thanks

@swingingdodgy 8 жыл бұрын

Great mate just what I was looking for "job done" practical advice.

@TallyHoTech 8 жыл бұрын

+swingingdodgy Hey Dodgy. I appreciate your comments. It means a lot . Cheers :)

@DislikeFRIDAY 3 жыл бұрын

Thank you very much! i was able to adjustmy seiko monster (4r36) from -15 to +6 sec per day. I always like to run them rather faster than slower bc then you just have to pull the crown out and wait for a few sec and not ajust the time again. My slow Monster really bother me and i stoped wearing it, wearing my BLNR or my BB58 instead which both are around 1-2+Sec/day. For testing accuracy i used two programms called TG0.5.0 and PCTM_free. These were very helpfull for testing and adjusting the watch.

@crusader3012 4 жыл бұрын

Nice video mate; gave me the courage to have a go. So far I've got it at -6 sec a day after only three prods with a plastic tooth pick (was running at -25 a day) I will stop when I get to approx +5 a day.

@Macwill1985 4 жыл бұрын

Thanks mate!! I was having trouble finds something like this for my invicta 8926.

@davidbaird1898 4 жыл бұрын

Brilliant video. You made it so simple. Thank you

@stevem6963 3 ай бұрын

Thanks. No other tutorial warned about touching the left adjustment

@AndyFitzgerald 6 жыл бұрын

Cheers mate, great video! just what i was looking for!

@TallyHoTech 6 жыл бұрын

Sweet :)

@ntorresla Жыл бұрын

Thanks for this great video, I have to regulate a seiko monster 2 who speeds at 5 minutes in an hour... I was thinking to make it service but there's so much pleasure on DIY

@hurryporter4824 3 жыл бұрын

would you film how to afjust a eta movement? thanks

@Jimbob9315 2 жыл бұрын

Great video sir, thank you for sharing this with us all! I'm curious to know what the best tool or object is, to make these ever so slight adjustments? Is it possible to just use a small, everyday object to do this? Thank you! 😊🙏🏻

@tantu2395 6 жыл бұрын

Simple and direct, well done!

@TallyHoTech 6 жыл бұрын

Cheers mate

@lsdMarch9 7 жыл бұрын

hey this is a great video I got a Seiko 'Kakume' that's on the up - it's a bit of a frankenstein and running fast so might give this a go. just wondering on what your thought's would be about adjusting speed on a Fortis B-42 and Tag Heuer Aquaracer ?? the Fortis is going fast and the Tag is way slow..

@andydinning4781 7 ай бұрын

Thanks for that explanation, explained in laymen's terms, such a rarerty these days.

@strshooter7399 19 күн бұрын

Thank you, this video was very helpful as I tried to regulate my Seiko Turtle SRPC91 ~ Save the Ocean Blue. My 1st better than a $50.00 Casio (though I have nothing against Casio, inexpense, but worked day and night with no issues. But after the 4th or 5 battery after many years, a new battery didn't work eh, great little watch that Casio.. ) My turtle is just started to really show it's age... though it's only been since 2019. I've regulated (or tried damm hard to) when I first received it, as it was 17 seconds + off each day. Anyways, it's been awhile since I'd been under the hood and your video was helpful to me. God Bless and happy 4th of July 🙂

@MettaLovingKindness Ай бұрын

Thank you very much. Super simple instructions. May you be well and happy. Legend

@TallyHoTech Ай бұрын

You're welcome!

@jonathanhancock1241 Жыл бұрын

Thanks for the Video. it was a big help.

@minniefontein1665 4 жыл бұрын

Thanks for the video. Do Rolex watches have the same mechanism of speed adjustment?

@sorenahlback 4 жыл бұрын

Nice video but if the BEAT ERROR is wrong you need to adjust the other "thing" below first and then the RATE. It's not dangerous as long as you can measure in some kind of timegraph and for that you can use an iPhone, the microphone on the headphones and Watch Tuner App. Works relly well.

@terryjohnson9895 Жыл бұрын

Good info

@Deploracle Жыл бұрын

You can do it without a device also. If you can let down the mainspring ... the balance will stop. Ideally when the balance is at rest, it's impulse jewel should be pointed directly at the pallet fork pivot. This is where the larger adjustment tab comes in. As you move the tab, the entire balance/mainspring assembly rotates. When the impulse jewel is aligned in the pallet fork when at rest (no power on mainspring) .. that will be very close to a zero beat error.

@galenmarek8287 Жыл бұрын

@@Deploracle priceless advice! I accidentally touched that lever when adjusting the correct one and my watch hasn’t ran correctly since. At least I have a good reference point to start at thanks to you.

@justintime1218 2 жыл бұрын

Thanks for the video! But how do you know how much you need to move it to slow it down in my case.. One of mine are running 15 seconds fast.

@amb2308 4 жыл бұрын

Excellent video! You don't know how much it has served me. I have a question: what tool did you use to remove the back case?

@ondertuzunalp7398 Жыл бұрын

Absolutely best and helpful video in this topic, thank you sir . But it is too late for me , because I touched big one that you are warned not to touch , in order to regulate beat error , now hair spring is gone and my watch stopped. I hope that you have a video to fix it 😢

@ak1920 4 жыл бұрын

Great. I got my seiko movement back to around +12 seconds a day...Thanks for the video !

@floychan6067 7 жыл бұрын

Thank you So much for showing So clear!

@TallyHoTech 7 жыл бұрын

+Fl Chan Thank you champ

@eXilz0 4 жыл бұрын

Nice explanation, thanks.

@mattr3632 4 жыл бұрын

Question: what are the brass pieces in each lever for? Thanks for the video. It was clear and concise w/out wasted time. I'm a huge fan of getting straight to the point w/out 10 minutes of history. Once I have the right tools I'll have a go at adjusting my Seiko 5. It loses 3-4 minutes each week.

@JDDD33 Жыл бұрын

counter balance weights.

@bikeman123 8 ай бұрын

@@JDDD33no they're not

@glenvillanueva6950 Жыл бұрын

I think I finally got it right after several attempt. I was scared to open it at first, thinking I might compramise the integrity of water resistance. I do not have a timegrapher and it is not ecomically wise to buy one for just one watch. Overcome your fear. If you mess it up, oh well, you learned something. I am happy now with my Seiko on the right rhythm. Now, if only I can find a video on how regulate Casio watches.... Any suggestions? Link please.

@tahraqapie4783 6 жыл бұрын

Very clear video, thank you

@TallyHoTech 6 жыл бұрын

Thanks mate

@michael1st895 4 жыл бұрын

Your ace I am new to automatic watches and mine was running 5 mins fast every 2 day now I've watched this sorted thanks very much and great use or the macro lens

@chirots 4 жыл бұрын

You adjusted yourself at home???

@michael1st895 4 жыл бұрын

@@chirots yes I adjusted the time on my automatic watch and now it's running about 2 seconds fast but near enuff perfect just follow this guys video and you should be fine if your not confident doing this yourself then take it to a watchmakers or a professional who can do this for you.

@chirots 4 жыл бұрын

@@michael1st895 I am confident doing it by myself at home, but I am not sure how to measure the time after each adjustments. Currently I are using app called watchcheck for a day/ a week measurements.

@michael1st895 4 жыл бұрын

@@chirots I just left it a day then on my smart phone got the time with the seconds showing as well just to see how it was doing over a day or to currently my omaga is 5 seconds out which I dont think i would get any better but i think over all it's just a matter of checking and adjusting till you hit that sweet spot hope this helps some what

@michael1st895 4 жыл бұрын

@@chirots also I relatively new to automatic watches so there may be a better way of recording it down I.E the app you mentioned

@darrenstevenson8123 11 ай бұрын

Does this work if second hand is running at 60seconds dead on stopwatch but watch gains 15 minutes per hour

@yeahgoood 7 жыл бұрын

Thanks for being a nice guy.

@jonsmith4669 8 жыл бұрын

Great vid but notice there is a little pointer on the regulator ring to help see how much its moved..

@TallyHoTech 8 жыл бұрын

Cheers mate. :)

@alfredomelendez7698 7 жыл бұрын

hello. how much should I move the pin to set the watch. It goes forward 33 minutes in 16 hours

@jonsmith4669 7 жыл бұрын

@100332582351409947136 Move the regulator ring pointer to the negative --- side, a tiny amount at a time, it may take a few days or a week to get it right,be very careful not to touch the balance wheel or hair spring....use a loupe ,(magnifying eye glass) but if the watch is very old and worn it may not be possible to get it accurate at all,wind up or automatic watches are not as accurate as quartz watches.

@seikibrian8641 7 жыл бұрын

" It goes forward 33 minutes in 16 hours" If your watch is running that fast, no amount of adjustment is going to correct it; something is VERY wrong, like inner coils of the hairspring stuck to each other. It needs to be cleaned and demagnetized.

@seikibrian8641 7 жыл бұрын

"use a lope" * loupe.

@savvass2149 Жыл бұрын

Some have levers in-between the plus and minus to adjust instead right?

@Asad-2166 4 жыл бұрын

Thanks for the upload Very useful, God bless you 🙏👍

@ColboyMontana 2 жыл бұрын

Great video. Thanks!

@varietyyachtsvessels6769 Жыл бұрын

Really Great Video.

@52griz 6 жыл бұрын

Works just fine for el cheapo K&S and Winner brand watches as well. Simple, easy to follow instruction and I'm a yank.

@TallyHoTech 6 жыл бұрын

@Asad-2166 4 жыл бұрын

How do you know how much pressure to put on it

@carraplaps 4 жыл бұрын

Thanks! This is very helpful.

@TallyHoTech 4 жыл бұрын

You're welcome!

@cariza5 5 жыл бұрын

Which Seiko movement is best for keeping time accuracy and not losing or gaining seconds between the NH36A and 6R15 Movements.

@TallyHoTech 5 жыл бұрын

Yes

@ahnate Жыл бұрын

Cheers Tommy-O, epic vid bra

@imploud 6 жыл бұрын

What happens, when you try to adjust the stud holder (that you shouldn't touch)? I need to adjust my watch to go slower, but when I do it with the knob you just showed, it stops ticking when I turn my watches to the vertical position...

@JuergenPurgstaller 6 жыл бұрын

As far as I know, it is to adjust the beat error, which is the difference in milliseconds between the two swings of the balance wheel. If you watch a video, which explains the workings of a time graph they talk about it.

@crobulari2328 6 жыл бұрын

You will put the balance out of beat. Then you need a timegrapher to reset it.

@humid-rb7rt 2 жыл бұрын

What type of tool is used for adjustment? Should I get a kit of some kind?

@martinlowe5934 6 жыл бұрын

Thank you clear and concise

@TallyHoTech 6 жыл бұрын

cheers

@soaremicheledavid6020 4 ай бұрын

My watch was runing with 3 minutes faster, now runs 10 seconds faster, thanks!

@xMig27x 2 жыл бұрын

what if my watch run 2 hours faster a day is this gonna fix it? or I need to replace the balance wheel

@thompson4620 5 жыл бұрын

Thanks for the close ups! At 1 min, you say not to touch that lever. What is that lever? What happens if you touch it? How do you fix it if you do touch it? I can't seem to get it beating right after bumped it. :(

@mretrain2338 3 жыл бұрын

kzfaq.info/get/bejne/r9F-ecmDms27ZGQ.htmlm9s

@mr.yehtogg6162 Ай бұрын

Hello i hit the balance wheel acadently while trying to do this and acadently while trying to do this and nog it doesnt move what do I do

@vampire_kiril 9 ай бұрын

thanks for this man appreciate it

@lionel170 5 жыл бұрын

Only practical video on regulating a mechanical watch I've seen so far. Great video.

@paulukjames7799 Жыл бұрын

Thanks needed to know this

@kristiangustafson4130 4 жыл бұрын

Hey thanks very helpful. I'm going to have a go as my Seiko 5 is running 5-6 min fast a day. But one thing: you say clockwise to slow down, anti-clockwise to speed it up. But the arrows you put in are the opposite.... Is this because you are referring to the FACE of the watch and we're looking at it upside down?

@mattr3632 4 жыл бұрын

I think the arrows are correct. The arrows on the left side refer to that side of the adjuster where there's a pointer. If you turn the adjuster clockwise, the left side of it moves up. If you turn the adjuster counter-clockwise, the left side moves down.

@gitman3486 Жыл бұрын

Just to be clear, you're using the brass thing as a handle to rotate the larger thing it's attached to, not rotating the brass thing within that groove right?

@BillSikes. 3 жыл бұрын

Mine gains 2.5mins per day, how far would i need to push the lever?

@Gotobar 3 жыл бұрын

I just set my watch the other day, but today the time changes when the second hand hits 3 instead of 12, i think this might be what i need to do to fix it

@TallyHoTech 3 жыл бұрын

mmm How is it now

@bradcasper4823 Ай бұрын

I just bought a new one and it's too fast. Should i send it back? Does doing such thing void the warranty?

@DistrustingToaster 11 ай бұрын

Oh my god thank you! My SNK809 has been gaining time like nobody’s business, honestly I’ll set it in the morning and by mid afternoon it’s gained 5 minutes. I’m sure this won’t completely fix the issue but it’ll take it from being unbearable to a mild annoyance

@georgediama 6 жыл бұрын

I have an old omega seamaster which surprisingly loses under 8 seconds a day and once a week I believe is when it loses a couple of minutes but with some crown adjustment it tells he right time

@TallyHoTech 6 жыл бұрын

Awesome 😎 you have a good one

@georgediama 6 жыл бұрын

Western Gents United thank you

@rodgercarter3837 Жыл бұрын

What happens if you touch the "do not touch" thingy? I moved it on my watch before I saw that I was not to touch it.

@julianrafalko313 4 жыл бұрын

How does one know how much to move the lever?

@Carlos-nq7up 2 жыл бұрын

Thank you! 👍

@bigcheese82 5 жыл бұрын

Did you adjust the gold or silver part? It cuts out at the end? And how much is needed?

@TallyHoTech 5 жыл бұрын

small as you can do and I only moved what I said I did

@ryan355 3 жыл бұрын

I'm still confused. What moved? Gold or silver? I didn't see it...

@waiyipsin2377 Жыл бұрын

Thanks your video!

@TallyHoTech Жыл бұрын

Welcome

@davidcoleman2463 5 жыл бұрын

My vintage Bulova runs about 1 minutes fast a day . I don't mind . I just reset it in the morning . If I want a accurate watch I will wear one of my quartz watches . ( When I travel I wear a Timex quartz ) still a good video . Thanks .

@TallyHoTech 5 жыл бұрын

Woooo

@Vallee152 2 жыл бұрын

How do I test the timing?

@robbiejames1209 6 жыл бұрын

hey, great vid, much easier to see. what should i do if i moved the wrong one by accident? :/

@TallyHoTech 6 жыл бұрын

Take a photo before you begin I guess you just have to get it back as best you can. I think it will just put the timing out of whack

@SmokeyStoner 7 жыл бұрын

Cheers, mate.

@TallyHoTech 7 жыл бұрын

Cheers to you too :0

@mail06513 6 жыл бұрын

Great video

@TallyHoTech 6 жыл бұрын

Thanks mate

@davidcoleman2463 4 жыл бұрын

Thank you . I have a Vintage Bulova automatic from 1950 . It is running 1 min fast a day. Maybe I can slow it down .

@jackhb7552 4 жыл бұрын

@@silverghost4206 I'd agree, that's crazy good for an old watch, you'd only really get better from a good service. On that note Anthony, keen to know what you think about regulating a 1950s Omega that is going out by 5 minutes odd over 1 hour? Is that too much to regulate and needs a service? Bought to flip it so I imagine I'll be cutting profits if I have it serviced but its 9K so who knows.

@jackhb7552 4 жыл бұрын

@@silverghost4206 Yeah had a feeling, just wanted to confirm, thanks :)

@muffemod 2 жыл бұрын

It's fairly intuitive. The + and - are on the balance. Been regulating before there was youtube.

@nasdaq1966 3 жыл бұрын

...I pushed it to the right in order to make it faster. Now watch stopped working. Can it be that it was too much to the right?

@quinnjones2886 2 жыл бұрын

What if my watch is all the way towards the plus end and still loosing five minutes a day? Should you adjust it so the little arrow is outside of the +/- scale?

@KyrieEleisonMaranatha Жыл бұрын

No, if your watch is all the way out and still losing time that severely. You are in need of a complete service on your watch. Send it off to a watchmaker and have them refurbish the movement.