You're welcome. Thanks for the wonderful commet 😊👍🏻

Only issue I have is when he curved the line going through the flat side of the head. If the side of the head is FLAT, the line going through it should not be curved.

You're welcome. Glad to know it helped you. Thank you for commenting 😊

You're Welcome and thanks to you for commenting😊

@Ella, thank you for commenting. This really motivtes a lot 😊 I am glad that you liked it.

Thank you Jamshook 😊😊😊 Glad you liked it

Hi, thank you for the comment. I am glad to know that it helped you.

Thank you Greg 👍

Thanks a lot. Appreciate your comment😊

You're welcome and thanks for commenting. I am glad to that it helped you

I am glad to know that it has helped you. Thanks for commenting

Hey welcome and thank you for sharing👍🏻😊

You're are welcome. Thanks a lot for motivating words 😊

Thanks a lot😊😊😊

Thank you Maria 👍🏻

Thank so much

You’re welcome and thanks to you too 😊

Thanks a lot 😃

You’re welcome and thanks for commenting 😊

You're welcome and thank you😊

You’re welcome 😇

Hi carlos montufar. I am really happy to hear that😊

Thanks vegeta xx. I am glad to hear that 😃

Hi Sathish Kumar. Thanks for the comment. I agree with you to an extend. Loomis method is more of laying the features in the correct place, whereas Reilly method is more advanced and demands good observation and vison, firstly to understand and then implement into your drawing. Its more of form and rhythemic lines.

Thank you very much hanen asiri for the lovely comment 🙂🙂🙂

You're welcome😊 Thanks for commenting

Cool👍🏻 I am glad to know that

Thanks Paulo Willians 🙂

Rebeca Ramirez Thank you 😊

You’re welcome and thanks for commenting 😊

You're welcome and thanks for commenting😊

Thank you Bikash for the wonderful comment and wishes. I am too hoping for the same😊

Hi Elina. You cannot match this accurately, since the proportions differ from person to person. The slice will always differ with respect to the size and shape of the head. However, you can achieve this, by dividing it into three equal parts from the center half(browline) of the circle to the end of the circle. The starting point of the third part represents the nose line. Similarly you can achieve the hair line. Joining the hairline and noise line should give you the side sliced circle(side plane) I hope i was able to explain, if not kindly share your drawing or the reference image you are using and I shall send you the drawing. Email id: sanjog311@gmail.com

You're welcome lucia 🙂

Glad to know that it helped you😊

Thank you😊 It is always difficult to judge and hence i recommend using reference ball. Its a life saver

Thank you

Thanks a lot After dividing the circle into 2 halves, divide again the upper and lower half into 3 equal parts. So in total u have six equal parts. the second line is the hairline and sixth is nose line. One suggestion keep paper handy while reading this comment and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion

I am planning for that and soon will start series on that- baby, Toddler and teenager. Thanks for commenting😊

@@SanjogSinnarkar ok.thank you very much

The inner circle is two thirds the height of the outer circle, and the width of it depends on the amount of rotation of the head. This is a good tutorial explaining it.. kzfaq.info/get/bejne/Z6uAgbyIyqvKYYk.html

Thanks for commenting. I am glad to know that my videos have helped you. Please check my other videos from loomis playlist for side plane measurements. If those videos don't help then let me know.

Shreya Bagchi Thanks a lot

No dear,thanks to you.It was so dificult for me but not now.

Good to hear that 👍🏻

I have recently added similar video on loomis method. Might be helpful as well. Sharing the link with you. Thank you. kzfaq.info/get/bejne/rJd6bMuUvbnQc5c.html

Chad Caravaggio You can get that on AliExpress, Amazon. The name is fillable ornament ball.

lol yes pls

Yes! I'm going to buy one today and I do not want to screw it up by getting the lines wrong!

Man Ong Gia You draw it just under. The top lid should be about equal to that center line.

Hi Man Ong Gia The brows should be on the center line, since you would be slicing off the sides of the sphere. From Centerline to the bottom of the circle divide it into 3 equal parts. The eyes lies on the First part. If you do not slice the both sides of the sphere, and include the complete sphere, then the eyes will lie on the Centerline.

Hi Lightning, The brows should be on the center line, since you would be slicing off the sides of the sphere. From Centerline to the bottom of the circle divide it into 3 equal parts. The eyes lies on the First part. If you do not slice the both sides of the sphere, and include the complete sphere, then the eyes will lie on the Centerline.

Thanks a lot

Thank you

Amazon

@@SanjogSinnarkar ok thanks

Thanks

please check my other videos from loomis playlist. please let me if that clarifies

Sanu B Ofcourse yes, you may also use scale for drawing straight lines. Tools should not be a barrier😊

Thank you Nelson Jiménez. Happy to hear that you liked the method. Soon , I shall make a video on how to make markings on the sphere.

Newsprint

Thank you so much. Will make the video soon

I use Conte Pierre Noire pencil. It is combination of graphite + charcol

@@SanjogSinnarkar Thank You for your reply

You're welcome

David Rivera Thanks hard to explain. Will try to make video

I simply drew a center line on x and y axis and for the side plane then I placed bangle on the ball and drew the line. you may use any other circular shapes to draw that

@@SanjogSinnarkar Thanks. What kind of ball and where can I find one?

It is called ornament fillable ball. Google it and you should get options. Found on Amazon and AliExpress

Gaming Rex Sorry to know that tech support is not paying you enough. Thanks for commenting👍🏻😊

Thank you. Foundation course hai jiski link mein share kar raha hu. Kuch hi dino mein continue karunga. kzfaq.info/sun/PLkfOk44H7FPJdrLnIO2b5CXwafJPT86t-

@@SanjogSinnarkar thank u sir... Aap detailed and deep content share kr rhe hain... Ye bhut helpful h.

@@saritadwivedi1384 You're welcome😊 Thanks for the comment. I am glad to know that😊

Thank you Ronald 😊

sorry for late reply. Check the nose and in which it is pointing/direction and accordingly place other features

I simply drew a center line on x and y axis and for the side plane then I placed bangle on the ball and drew the line. you may use any other circular shapes to draw that

@@SanjogSinnarkar thanks

Thanks idnec. I am glad to know that you liked the video. Firstly, divide the big circle into two equal halves. Then again divide each half into three equal parts. By doing so, you will get six equal parts altogether. The bottom line of the first part and starting line of the sixth part should give you height of the circle. I hope this helps, if not kindly share your email id and I shall provide you an drawing example. My email id is sanjog311@gmail.com

Sanjog Sinnarkar Thank you, you are very helpful!

Always welcome😊

Thank you 😊 The size is 3 inches.

Conte Pierre noire

Choose any one

Sorry i don't understand what you say

Klawdd 😂😂😂 yes you're right. It sounds like that however I have said circle😊

To know watch this video kzfaq.info/get/bejne/qtOInZxlld_ZoHU.html

Thanks for commenting

may I ask what's the sphere tool you used in the video call

Clear fillable ornament ball. You may buy from Amazon or AliExpress

thanks

I found a large clear acrylic ball at Michael's. Used for making Christmas ornaments.

Surya Mohan Here’s the link for front view up tilt with various angles. kzfaq.info/get/bejne/iN1oZMSVq6q2ZH0.html

Roger that. Will do that for future videos 😊 thanks for commenting

I have already done one 3/4th view kzfaq.info/get/bejne/r6iioL2UqqrWfaM.html

Hi Yograj Chamlagain I have mailed you thrice and yet you haven't replied. I feel there is problem. You can ping me skype. My skype id is sanjog.sinnarkar Awaiting for your response

@@SanjogSinnarkar chech your mail please, I have responded you sir

Received your email. I have mailed you too. Pls check

That makes sense. Shall create in future till you may check my other videos. I have covered in some of them