Hi sorry to message but I done this too but it’s still saying eo3 ? What else could I do x

@@debbierobinson3987 unfortunately it’s probably that your pump is damaged. Probably a new pump, that’s what eventually happened with my machine. But I’m not an expert, thats just what happened with my machine. But do have a good feel around after you take the cover off, as much as you can anyway, just to make sure there is not something still stuck insides the pipe or the fan thingy. (Clearly not an expert 🤣)

Nor I! ❤

That's a good point - you have to make sure the waste is clear beyond the washing machine too.

Good point! less cake tins full of grey water!

The problem your trying to fix is not draining. How do you plan to drain it prior ??

hooray

Mine doesnt either lol and the error came back on the next load aswel!

@@jay71512 bummer man. We put ours on some wood blocks, drained it and luckily the error didn't come back.

Me and my fiance have just done ours we didn't have a hose either mate juststick some towels down grab a mop and start letting the water out then screw it up tight to stop more coming out and sort the water out then let some more out till its empty the just pull the filter out and clear any debris we had 2 50p's and 2 20p's lmao and a painted fake nail 🙄 hope this helps

Actual pain in the arse musta used aboot 250000000 towels for a soaking floor

@@robr182 Well here we have washing machines in the bathroom so no problem with the water. I washed a pillow and it broke. Ehe entire tube was blocked and it gave E03. I pumped air with a drain pump and huge blobs of pillow filling came out. Then I put the shower in the drum sndlet water flow a few minutes until it was clear.

That’s a good point - it depends where the washer drains to - but that also needs to be clear. I’ve found the pressure for the pumped out water quite high, so never thought to look for a block downstream - I had thought it would just jet out all over the place If blocked

I had this and a new door part was fitted but it didn't solve it.

Sometimes they throw this code when the heater element is knackered. Thats what I’ve been told on the past.

Really that’s so unfortunate. I would be pissed. What machine did you go for next?

Towels and patience

It could be that your drain is blocked, but that would normally result in water all over the floor

How did you replace it? Where did you get the part and was it hard to fit? Thanks

@@ukessko For replacement, just search the KZfaq with “wash machine heater replacement”. It’s not that complicated, how ever my heating element was stuck so it was real struggle to get it out. Regarding the parts, wait till you get the current one out and then you can google its model code. Make sure you order the same one. And don’t worry if it comes longer than the current one, it’s still good.

Me too and I’ve just lost my job so worried what I’m going to do .what did u do further ? Any help is appreciated

@@debbierobinson3987 Hi I did everything in this video but still get this error code what I have worked out is the heater is getting to hot so on the daily wash I make sure I turn the temperature down from 60 to 40 I still get a good wash without the error x

Thankyou so much I’ll give it a try x

@@debbierobinson3987 hopefully this will help I do feel the machines have a manufacturing fault but not found anything to back that up don’t worry about your job to much I also lost my job at the beginning of COVID-19 followed by accepting a post I hated so much I gave it up putting myself out of work again in such a difficult time. I have now started another job 2 weeks ago that I am loving so please don’t give up I know I nearly did after getting knocked back on about 150 application. Good luck with the machine and your search for another job

@@DARRENJOHNHARRIS1 aww thankyou means a lot .sadly I tried that and it’s not worked ,still saying eo3 .I’m going to have to pay to get someone out as I have 3 kids .why do things always happen at bad times !!! Thanks for you’re help and I’m glad you got sorted

Interesting. I'm just going by what Hoover say on their website and on what works for me. service.hoover.co.uk/advice-centre/error-message-e03-appears-in-the-display-of-the-washing-machine/

Whats the repair for that as it keeps happening to us, new heater?

Not sure. It's happening more often on my washing machine, but just draining it every time seems to fix it.

garrethbert found a pound coin lodged in the pump

You could try switching out the heating element - that sometimes throws an E03 code for some reason.

@@garrethbert how do I do that please ?

Sorry to hear about your plight Debbie. Sometimes the E03 can be caused by a failing heater element - they're about £15 on ebay and require a few screws and bolts to replace - probably not everyone's cup of tea messing with electrics on a wet appliance - obviously you'd have to unplug everything and leave it a while for everything to discharge before getting into that. Before you try that, you could also try making sure the pipe that drains out is not clogged - the flexible tube that connects to your drain- could have hair and fluff and gunk in it. When you cleaned the filter, was there anything in there?

@@garrethbert hi .nothing come out of the filter at all I was expecting it to be clogged .I left it lastnight poured some zoflora in and tried it an hour ago and it came on ,it like did a chugging noise then could hear the water flowing so maybe something was lodged x

@@debbierobinson3987 Hooray!