How To Easily Replace 5.7 Hemi MDS Solenoids

Рет қаралды 4,061

Күн бұрын

This is how we replace the mds solenoids for the 5.7 hemi in the 2014 dodge charger rt awd. Pretty simple job really that doesn’t require any special tools
Solenoid Part number Dorman 916-592XD quantity 4
Gasket set Felpro MS97089
#diy #dodge #charger #awd #mds #hemi #challenger
#mpg #dorman
How to remove fuel injection clips in 2014 to 2023 hemi.
How to remove intake manifold on 2014 to 2023 hemi.
How to install intake manifold on 2014 to 2023 hemi.
What to do when your mds solenoid breaks in the block.
How to remove mds solenoids from your 2010 thru 2023 hemi.

Пікірлер: 19

@UnfinishedProjectDartSport 4 ай бұрын

Sweet!!

@trackandtravelwithrick8933 4 ай бұрын

The drone is back! But mpg is up. I get why you want to shut it off. But I’ll run it. Easy job. Less than 4 hours

@KarenLevin-td9mp 3 ай бұрын

Thanks

@79asspin 4 ай бұрын

👍👍👍

@jaimegonzalez6158 Ай бұрын

I was doing this on my car but for some reason I couldn’t get that last hose at the very least end off. It was super tight, any recommendations on how to get it off?

@jerayracing Ай бұрын

The hose on the back of the manifold? If I remember correctly it was just pushed on. Check for a clamp. Sometimes the long needle nose pliers that are bent are helpful to reach a hose and push it off. Thanks for watching

@gordmcdonald2807 2 ай бұрын

Nice vid. How long would you say it should take 1 person to do the job? I have a 2013 300c. I haven't done a test yet but it won't drop down to a 4 cyl. Engine run great.

@jerayracing 2 ай бұрын

Less than 4 hours . Need an intake gasket set and a good inch lb torque meter. Seems easy to over torque the manifold. Mine threw a code and check engine light is how I knew I had a problem. Good luck thanks for watching

@turbotom416 4 ай бұрын

Have you ever changed your PCV valve?

@jerayracing 4 ай бұрын

No I haven’t, probably not a bad idea. Thanks for watching.

@Fabri7ioRonaldo 4 ай бұрын

Can you tell me if the first solenoid of the driver side is number one? Or which cylinders work with each solenoid. Thanks

@jerayracing 4 ай бұрын

1,4,6,7 deactivate Drivers side is 1,3,5,7 Passenger side is 2,4,6,8 hope this helps Thanks for watching

@Fabri7ioRonaldo 4 ай бұрын

@@jerayracing thank you so much for your help, another question, I have an Jeep grand Cherokee 2018 and I have p3425 code Cyl 4 , which solenoid is it?

@jerayracing 4 ай бұрын

Passenger side front solenoid If your screens on the solenoid looks plugged you may want to change them all.

@Fabri7ioRonaldo 4 ай бұрын

@@jerayracing thank u so much for your help, I really appreciate it 🤙🏻

@viamarieee 4 ай бұрын

Can you drop all the parts #

@jerayracing 4 ай бұрын

Solenoids are year specific For a 2014 Dorman 916-592XD Gasket set Fel Pro MS 97089 I like to use rock auto to find part numbers even if I don’t always buy from them Thanks for watching www.rockauto.com/en/catalog/dodge,2014,charger,5.7l+v8,3305721,engine,intake+manifold+gasket,5424

@PeteSambolin 2 ай бұрын

Yes nice cylinders head but how stupid the engineer to put 4 solenoids under the intake manifold… Know if you are a high performance guy and you want a Hemi engine you want 8 cylinders at all times!!! F*ck the MDS solenoids… take for example that’s is way you are working in that right know! If you don’t have the system! You will not have a problem! Same GM and Cadillac has the same engineer system and failed… the system sucks! Me if anything happens to have an engineer system like that, I will not buy the car or truck…. Period.

@jerayracing 2 ай бұрын

Yeah I mostly agree, my challenger is a 6speed so no MDS that’s how I want it. But the charger is my daily. When mds failed I used a tuner and shut it off. Mpg dropped significantly so I repaired it. I drive it 90 miles a day. It makes a difference. These modern engines frustrate me. What you save in gas you pay in repairs. Just trying to help folks that want to fix there’s and not get screwed by the dealer. Thanks for watching.