How to enter hidden service menu in Ford Focus MK2 (C-Max, secret factory mode, DTC)

No video

How to enter hidden service menu in Ford Focus MK2 (C-Max, secret factory mode, DTC)

Рет қаралды 469,006

Күн бұрын

Perform needle sweep, LED test, DTC readout and other useful positions in Ford Focus MK2 and C-Max hidden service menu. Those information can be really helpful while troubleshooting issues with engine and instruments.
Full menu description: mr-fix.info/for...
Check out more useful tutorials at mr-fix.info/

Пікірлер: 78

@francescopalmieri74 2 ай бұрын

hi friend can you help me I would like to understand how to deactivate the passenger side airbag of a Ford focus c max 2003 thanks for your help

@craigcalder7264 5 жыл бұрын

It’s an old video but worth a shot at an answer.Just bought a cheap 2005 1.6 Zetec for work.The dials go crazy from time to time throwing engine system malfunctions and even goes into reduced acceleration.I was told it’s either a known fault on the instrument cluster or maybe the battery.Can anyone shed some light tia

@mrfixpl 5 жыл бұрын

Try this: Volvo V50 CEM / Ford Focus MK2 GEM connectors fix kzfaq.info/get/bejne/h9F3ktd4ucrTiZ8.html

@deanopresley 3 жыл бұрын

Just had this fixed i presume it was your instrument cluster. Common problem i am told.

@aubadaabdo4915 3 ай бұрын

Kann ich wissen, wofür ist die rote lampe an, kann man die ausmachen.

@derekcrabtree1465 4 жыл бұрын

I have a Ford C-Max 1.6 td with a power steering problem, would this help reset electrical fault.

@akenaj91 6 жыл бұрын

that fuel A/D input ... is it useful to see if the car is eletronically set to put more Fuel Input?! i have bought a focus mk2 and im not sure if it is electronically changed to have more power and so on.... thx in advance

@loukasstylianou1 9 жыл бұрын

what happens next?? does it remain there or it just go back to normal after the start ?

@mrfixpl 9 жыл бұрын

Loukas Stylianou after turning the ignition off and on again instrument cluster will go back to normal mode.

@EfeSuleyman 6 ай бұрын

Hwo can i do that on my focus mk2 2008 i dont have reset button

@joeyfretwell3403 5 жыл бұрын

Is there a setting to make your stirring go harder or make the car faster

@moussameftah3267 4 жыл бұрын

Do I have to keep pressing the reset button or keep releasing it

@Roberts_good_channel 5 жыл бұрын

Hello Please help My car is in romanian (i Think) and i have no clue how to turn it to english

@alostcontinent 3 жыл бұрын

Is it possible to use the Display for own messages for example by Arduino or Raspberry Pi?

@mrfixpl 2 жыл бұрын

Everything is possible. Not everything is worth the time spend.

@alostcontinent 2 жыл бұрын

@@mrfixpl just to use the words of George Mallory: "Because it's there" ;-)

@zhivagofelix2334 7 жыл бұрын

I have the same dash for a ford focus mk2 , how do i reset the water in fuel that keeps coming on , did a diagnostic and they couldnt pick up the error and changed my filter and drained the water but it keeps popping up ... thanks

@mrfixpl 7 жыл бұрын

Maybe it's the water sensor itself?

@zhivagofelix2334 7 жыл бұрын

Will have it checked out

@mrfixpl 7 жыл бұрын

It's hard to diagnose a car over the internet but please let me know if you fix it.

@zhivagofelix2334 7 жыл бұрын

Thanks will do

@ROSSVTS 6 жыл бұрын

Bro did u fix it, I have same problem

@L3N1NVEVO 6 жыл бұрын

I don't have a reset button on the left stalk. i dont have any buttons there actually. only left/right turn signal lights :(

@mrfixpl 6 жыл бұрын

Try with trip reset button on the instrument cluster.

@WhateverKeyKey2 4 жыл бұрын

How do you reset "oil service" ??? Or ist this Just a Gadget?

@thatfocusguy 7 жыл бұрын

It's doesn't replace a code reader though, it shows a limited number of DTCs that relate to the clocks only

@charlsworm 4 жыл бұрын

Mine is the odometer blank. Can anyone help me what are the problem. Ford focus ghia 1.8 2005

@JR19k 6 жыл бұрын

my 2006 focus 1.8 tdci lx doesn't have the buttons on the stalk or a trip reset button. weird I know. there isn't one anywhere. no hole where it should be or anything. how do I enter this menu?

@mrfixpl 6 жыл бұрын

Do you have OK button on the steering wheel?

@saifhassan8958 8 жыл бұрын

today when I've stated my car as usual and started moving the following happened " engine malfunction " message " transmission malfunction " " then the tow message disappeared and check engine light came on... but the car sound in normal and its moving normally >>

@1zanthan 7 жыл бұрын

Saif Hassan (so what was the cause cuz I'm in same predicament

@davormulti533 4 жыл бұрын

I do exactly everything like on video but notthing happens, please help, i own Ford Focus mk2 2005, 2.0, 100kw.

@jrfoleyjr 9 жыл бұрын

I am trying to find info for my 2013 Focus. Last fall, there was a recall for the transmission/clutch chatter [auto tranny but it isnt a regular torque converter]. Before they did the parts fix they tried some sort of computer "update" that only made it worse. Before the computer update, the car was getting 30 MPG and after all the work was done, it now gets 23 MPG. I am going to confront the guy at the service desk about this. But I wondered if there was a hidden menu diddle that I could do? Nearly everything goes through the computer on the Focus nowadays.

@mrfixpl 9 жыл бұрын

jrfoleyjr Modern cars have tens of computers. ECU, SRS, ESP, transmission, comfort functions, headlight adjustment, emission - each is using it's own computer. Hidden menu can only show you details of the instrument cluster work parameters. If you are experiencing increased fuel consumption, it can be caused by the new parts in your transmission and rolling resistance that will go away with time. But please get in touch with your Ford dealer.

@fungogh 9 жыл бұрын

jrfoleyjr The sequence is fairly similar on a mk3 (2011->) Focus. With the ingition/engine OFF, hold down the "OK" button on the left side of the steering wheel. While holding it down, start the ignition (if you also start the engine, you will get more data, like engine temperature & rpm, etc..., so it does not matter). You navigate through the self-tests with the "Down" arrow on the steering wheel (still left side). You escape the test by either pushing and holding the "OK" button again for ~5 seconds or by turning the ignition off. Now re your issues with the gearbox... what they did for you is that they re-programmed the "computer" that takes care of the transmission (aka TCM/Transmission Control Module) with the latest shifting "maps".. which is ok.. the decreased MPG is normal and TEMPORARY, as the transmission is in the learning mode and learns how to shift (you should also be seeing engine going into higher RPMs when shifting, compared to what you have been used to... and that is one of the reason of higher gasoline consumption).

@1shadoth 9 жыл бұрын

Thanks for sharing

@Brandonvscars695 9 жыл бұрын

Thats pretty cool, could you do a video on how to remove the engine cover? (I know, stupid question, i'm not used to this new weird engine plastic rubbish

@mrfixpl 9 жыл бұрын

Brandon P next time when we'll have access to Ford Focus :)

@vigneshn.y3048 8 жыл бұрын

interesting video. works on mine and great info

@vinetajaudzema1969 9 жыл бұрын

Thanks its very helpful you a good

@genesislucas9502 3 жыл бұрын

How do you remove the speed limit mode

@stojceavramovski9827 Жыл бұрын

On my Ford focus 2 1.6tdci 2006 this gadget NOTING HAPPENS...I have checked 5 times like on the video but Nothing is happening

@mariolabriola1037 Жыл бұрын

Does anyone know what the red circular light is to the right between the trip computer and speedo?

@bigmuller1 Жыл бұрын

Imobiliser......

@AnonimowyHD 5 жыл бұрын

Mr fix can you help me , when i turn off my focus mk2 1.8 my display its still on , i can go home for 24h come back and this its still on do you know how fix it ?

@mrfixpl 5 жыл бұрын

If you don't have aftermarket alarm system I would try to reset it by disconnecting the battery for 10 minutes.

@kehax 5 жыл бұрын

This is normal behavior. Only the display light turns off when leaving the car. The display stays on.

@abdullast3434 4 жыл бұрын

Check your doors one of them aren't close completely.

@chavvy960 2 жыл бұрын

What does #01 a163 mean on this.anyone?

@PhillBirch 7 жыл бұрын

Mine won't enter Test mode, whatever I do. I'm trying to find why there's a 14 sec delay on gauges, wipers, windows and other stuff.

@williamwedge5253 5 жыл бұрын

Phill, my wife has a 2008 CMAX and we also have around a 15 second delay on the gauges, wipers, windows etc. Did you find your problem? She just told me about it but apparently it's been doing this for about a month.

@coorvahmuch2379 9 жыл бұрын

Can I change light time of LCD in this service menu? Is it work in diffrent version of dashboard (less detailed LCD version)?

@mrfixpl 9 жыл бұрын

coorvahmuch Service menu is for diagnostics, there's nothing that you can change in it. This procedure works with all Ford instrument clusters with LCD displays.

@kilepsp2084 7 жыл бұрын

mr-fix hi, you can tell me how i can see instant fuel at this ford focus ? i have same ford focus with same lcd and i can't find instant fuel.

@TapateBen 7 жыл бұрын

In my car you dont have to enter in any menu to read it

@trumpetscall8910 6 жыл бұрын

Can this help me with a tail light problem, the bulb or fuse is not the problem.

@NunoLucho Ай бұрын

Keep pressing and turn the keys to second stage until it test mode

@vinetajaudzema1969 9 жыл бұрын

thats good but i have o my yellow light on an sign BEPERKTE WERKING EPR ???

@mrfixpl 9 жыл бұрын

Vineta Jaudzema Thats limited engine performance. Connect with diagnostic interface and check why your engine is in this low power mode.

@harryroberts7679 6 жыл бұрын

I've bought a ford ka 2010 and a dashboard light in the shape of a shining sun stays on can anyone advise what this could be thanks.

@carchannel4349 5 жыл бұрын

Bro 101° engine temp and ur temp arrow is down i have sameprob

@mrfixpl 5 жыл бұрын

Is the arrow moving when performing instrument cluster test?

@carchannel4349 5 жыл бұрын

@@mrfixpl what u mean

@mrfixpl 5 жыл бұрын

In test mode in this video 0:18. Does your temp arrow moves correctly?

@carchannel4349 5 жыл бұрын

@@mrfixpl yes like urs

@mrfixpl 5 жыл бұрын

If I remember correctly, Ford is using two coolant temperature sensors. One reports to the ECU, other one to the instrument cluster. Check if the other one and its wiring are OK, replace it if needed.

@robertocarlosz1 6 жыл бұрын

i have an error message and i have no idea how can i the error source finding " SG " processor fault , somebody have an idea ? thx !

@nuffbukks7157 6 жыл бұрын

Red arrow warning light

@alexchiddle5091 9 жыл бұрын

whats the point???

@mrfixpl 9 жыл бұрын

sean oxborough you can check your speed in different units (km/h mph) when traveling between France & UK, check temperature gauge if coolant is boiling and leaking but temperature in the instrument cluster seams normal, check indicators if ABS does not work but no warning light is on.

@vinetajaudzema1969 8 жыл бұрын

I have sign LAAG NIVEAU RUITENSPRVL do anyone now wath this nean

@mrfixpl 8 жыл бұрын

+Vineta Jaudzema Not 100% sure, but I think that this is service reminder (regular inspection).

@Xavipie91 8 жыл бұрын

Lol? It means your wipers fluid are low...

@FlabberQuestion 6 жыл бұрын

It means that you are an idiot