How to enter tapered ball nose bits into Vectric tool database

How to enter tapered ball nose bits into Vectric tool database - VCarve, Aspire, & Cut2D Quick Tip

Рет қаралды 26,085

Жыл бұрын

How to enter the correct settings for tapered ball nose bits into the Vectric tool database. These bits work perfect for cutting 3D designs. This lesson applies to Vectric VCarve, Aspire, and Cut2D.
Tapered ball nose bits mentioned(affiliate link):
shrsl.com/3pxfg
Vectric Master Training Course:
go.learnyourcnc.com/3LKeh06
Live Weekly Vectric Training:
go.learnyourcnc.com/live-trai...
My Bit & Supply Recommendations:
embed.kit.co/LearnYourCNC
Vectric Tips & Tricks Facebook Group:
/ vectrictipsandtricks
CNC Training Courses:
academy.learnyourcnc.com/
Find me online:
■ Website: www.learnyourcnc.com
■ Instagram: / learnyourcnc
■ Facebook: / learnyourcnc
■ KZfaq: / learnyourcnc
■ Blog: www.learnyourcnc.com/blog
#tipsandtricks #vectrictips #learnyourcnc

Пікірлер: 34

@LearnYourCNC Жыл бұрын

Want to become a PRO at Vectric software? Check out my Vectric Master Training Course >>> go.learnyourcnc.com/3LKeh06

@3waymore 22 күн бұрын

This was a perfect explanation and tutorial video

@flypic1098 Жыл бұрын

What a fantastic and clear tutorial. No waffle. Just straight forward explanation of what is going on. I have subscribed. Thank you. I'm an ex CNC turner but new to routing & Vectric. Jim

@rickmccaskill7888 Жыл бұрын

Kyle, I have found that it helps to put a tool number, because if you output all the cuts in one file your CNC will see the tool number changed and stop to alert you to change the tool. Having them all the same it will not stop.

@fierceflyer5 Жыл бұрын

I’m glad you mentioned the file info not being correct. I found this out the hard way. Now if I download a file I always check that the info is correct. This was a very helpful video. Thanks

@wallystoolshed7050 5 ай бұрын

I ran into your videos yesterday. I am glad a did. You are an excellent teacher. Kerp up the great work

@gregsanda9953 Жыл бұрын

Your videos have been a real help. Keep up the great work.

@RobSandstromDesigns Жыл бұрын

Good information Kyle and good suggestions on depth rate and naming tip

@JimKlempel Жыл бұрын

This was an amazing video. So helpful and easy to follow step by step. This was just the bit I was adding so it worked out great. Thanks

@jackseiler5207 Жыл бұрын

Big Help! Thank you.

@dawnbigwarfe6871 Жыл бұрын

Excellent info thanks

@james-kaygibson4437 Жыл бұрын

Good Info. Thanks.

@flypic1098 Жыл бұрын

Thank you very much for that clear explanation. Your tutorials are fantastic. Thank you. Jim

@LearnYourCNC Жыл бұрын

Glad you like them!

@robertpfohler363 Жыл бұрын

Great info and very concise as always! Thanks

@LearnYourCNC Жыл бұрын

My pleasure!

@troypritchard2999 Жыл бұрын

Great information my friend..... Good explanation...... 👍

@LearnYourCNC Жыл бұрын

Glad it was helpful!

@powerpc6037 Жыл бұрын

I've heard that you should set the plunge rate equal to the feedrate for tapered ballnoses doing finishing toolpaths because it will slow you down to the plunge rate anyways when you have lots of up/down movements while doing 3D models. I've set both my parameters to 2000mm/min (around 78ipm) for both those feeds and it works out ok, even on hardwood (only tried afromosia for now).

@martintvrdy3297 Жыл бұрын

Super !

@elegantboyremon5915 Жыл бұрын

Love From Bangladesh... 🥰🥰

@n4cls1 Жыл бұрын

Is there a way to edit the Vectric Tool List outside of the Vcarve Software. I currently use Vcarve Pro 11.016 and would like to work outside the tool database and then import my tools?

@rgoldino Жыл бұрын

I downloaded the Amana tools database directly from the Amana website. Have you checked their tool database to see if it is any more accurate than the one from Toolstoday?

@billwallace1057 Жыл бұрын

in your description of entering the angle of the taper, you used 6 deg. That would be the included angle. However the diaghram showing the tool in the database indicated the angle from the center line out which is half of the included angle....... now im confused a to which angle to plug into the d-base

@Heartbroken-di9fq 3 ай бұрын

Sir this tutorial was a inches but I need a millimeters sir can you make add new tutorial for me in millimetres ❤ take love from Bangladesh

@eitantal726 Жыл бұрын

11:45 why 1/32? I thought for a pass depth of one diameter, you don't need to slow down anything. Hence, should be 1/8", no?

@RobSandstromDesigns Жыл бұрын

Just rewatched the video. It was good the second time around too. I have noticed BROINWOOD and others are using TBN to do their inlays using a vcarve toolpath. I just watched a video where the creator indicated to be able to use a TBN for vCarving to do inlays required a person to enter the TBN as an Engraving bit. That was new information to me and I am not sure it is accurate because I believe I have selected my TBN 46280K in a vcarving toolpath and it worked as expected? Am I wrong - can I use a TBN in vCarve toolpath as a TBN or do I need to enter it as an engraving bit?

@LearnYourCNC Жыл бұрын

I just checked and you can use a TBN with a vcarving toolpath, so I would enter it as a TBN tool to reduce the possibility of errors.

@RobSandstromDesigns Жыл бұрын

@@LearnYourCNC thank you for checking - I thought this was the case.

@Z-add Жыл бұрын

Why doesn't it require the length of endmill? Isn't that a useful parameter?

@LearnYourCNC Жыл бұрын

Good question, that is a useful parameter but Vectric software currently does not require it. They rely on you to determine whether or not your tool is long enough to complete the job. Most of the time it is just fine. But if you are making deep cuts, that is when you want to be cautious and double check everything. However, it would be ideal if Vectric adds that in as a parameter in the future to avoid collisions on deep carves.

@elegantboyremon5915 Жыл бұрын

(Failed to Open file) solution please 🥰🥰