How to exchange the cassette / freewheel on the hub motor of your fat-tire electric bike

Рет қаралды 60,399

Күн бұрын

Пікірлер: 67

@guitartec 3 жыл бұрын

FWIW, to avoid drive chain drop outs at the front sprocket, check your chain tension carefully , especially if you install a wider gear range cassette.

@vegasromaniac 3 жыл бұрын

How did you take the nut out, my electronics are thicker than the inner part of the lock

@casycasy5199 22 күн бұрын

great video

@devtank 3 жыл бұрын

Your motor connector is smaller than mine, so getting that axle retaining nut off isn't possible.

@eastfam9516 3 жыл бұрын

Thank you, learned a lot 👍🏼

@UrbanDrivestyle 3 жыл бұрын

Glad you did!

@juanricaud2142 2 жыл бұрын

This is exactly what I need on my ebike, top gear is too fast to pedal, and low is too hard to go uphill with low or no motor assistance! Do you guys sell it?

@stewbrew239 Жыл бұрын

Wud have liked to see inside cassette as u took off

@LiveYourLifeeeeeeee Жыл бұрын

what is the size on the sprocket to remove the freewheel with

@garyedwards1590 6 ай бұрын

I wish there was a socket to fit over the nut on the motor cable on the Himiway cruiser 750 watt motor so I could change mine out

@mywaveinwoodswoodperfumes 3 жыл бұрын

I’m in love with this company and guys

@UrbanDrivestyle 3 жыл бұрын

Thank you so much! Which bike are you riding?

@Ematuresco 3 жыл бұрын

@@UrbanDrivestyle How big is the difference in the highest gear, i.e. 14 vs. 11 teeth ? (Max.Speed etc.)

@UrbanDrivestyle 3 жыл бұрын

@@Ematuresco the overall difference is a handful of km/h as you're not pedalling into the void with fewer teeth on the smallest sprocket - keep in mind, that this is based on torque & rpm!

@ozzie444 2 жыл бұрын

Wouldn't NeverSieze be better on the threads before putting the new freewheel on? Grease has a tendency to dry out especially when under pressure and not moving like when the freewheel is being torqued tighter from pedaling and NeverSieze will always stay as it was originally. Also there's pretty much zero chance of the freewheel coming loose because by pedaling the tendency is for the freewheel to always tighten.

@Hoggdoc1946 2 жыл бұрын

Yes indeed.

@TheRabbit1951 2 жыл бұрын

Anti Seize

@ozzie444 2 жыл бұрын

I thought I said that in my comment? Yes use anti-sieze (Never-Sieze or whatever it's called depending on the manufacturer), not grease. Grease can dry out. When I changed my freewheel, when I took it off the threads were bone dry with nothing on them. After some time this would have become corroded and siezed on making removal very difficult. Luckily for me I only had maybe 100 miles on my Cruiser so removal of the OEM freewheel was fairly easy. Put the anti-sieze on like you sell it, as the saying goes...lol. Watch this video from Haidong Bike. FYI Haidong is the manufacturer of Himiway eBikes. I did mine exactly this way, easy.......kzfaq.info/get/bejne/ZtWAhrWC0tbOh3k.html

@MathieuTechMoto Жыл бұрын

Thank you

@JohnCarloFranco-d5k Ай бұрын

Hello, where can I buy a freewheel adapter removal tool for an e-bike? The adapter for a regular bike doesn't fit.

@ChatGPT1111 3 жыл бұрын

Distance Ring = Spacer

@mydailylife32 3 жыл бұрын

How would I fit a single bmx sprocket ⚙️??

@KiliksMedia 5 жыл бұрын

Super nice

@user-zx9yy6lu9p 2 ай бұрын

so could I just take out the motor of a cassette and replace it with a freewheel? bafang rear hub

@bbltd.3154 Жыл бұрын

Where did you get the casette removal tool for a bafang hub?????.??

@Lumicron Ай бұрын

Why diddnt you show, how you changed the cassete? Isnt that, whats the video about?

@edinelsonramirez5656 10 ай бұрын

But, did it go any faster? Missed the key question ! :)

@paulwilkinson6977 4 жыл бұрын

would it be worth changing the front sprocket to a smaller one for extra top end speed ?

@UrbanDrivestyle 4 жыл бұрын

Actually for a bigger one! 58T is a great combo with the 11-32 cassette!

@zinodz2 Жыл бұрын

I’m having problems with installing the cassette on the motor. When I thread it in it ends up rubbing on the motor and that’s because my motor doesn’t have that little spacer like you’re have. Any suggestions

@jayflores5223 3 жыл бұрын

will the birzman socket fit over the bafang motor plug? did you have to modify or remove the plug? or will it simply fit right over?

@UrbanDrivestyle 3 жыл бұрын

the correct one will fit right over yes! :-)

@jayflores5223 3 жыл бұрын

@@UrbanDrivestyle awesome thanks! I have one on order from you guys! great video btw

@liambolland7962 Жыл бұрын

Could you convert a hub motor to single speed aswell I ordered my kit with a casette by accident

@LJC5865 10 ай бұрын

Bought an nb power 2000w r hub kit from Amazon with 135 mm dropout and fits perfect. EXCEPT the 11to 28 freewheel cassette is too wide..i had to remove the entire cassette, chain and derailer to ride at all.. 14 miles yesterday. NOW I'm looking around to see how to get a narrower cassette setup Any ideas? Is it a thing to remove some sprokets and add spacers to the back so i can tighten the sprockets together to fit or do they make a narrower splined shaft? The splined shaft measures 37mm side to side.. seems I need a 30 mm.?

@michaelhardin4113 3 жыл бұрын

NICE BIKE WHAT KIND IS IT

@StefanMorariu-yd4zz Жыл бұрын

from where to get the cassette, the link is no longer available.

@kayacato-guler6495 Жыл бұрын

I have a bafang motor with the wire like this, is the only way to strip the wire ?

@neogeo79 Жыл бұрын

Ok ok ok... I can do this.

@ayazalishah1989 Жыл бұрын

Hi I buy bafang hub motor with 9 cassette and my bike is 7 speed cassette now I don't what to do please can you tell me

@sga9431 2 жыл бұрын

Hi @Urban Drivestyle. I have the same 11-34T cassette freewheel and i have a problem on the 6th and 7th gear, I feel vibrations when pedaling. I thought it was the chain's fault, maybe it's not compatible with the new freewheel because the old freewheel cassette has slightly thicker gears than DNP and i should buy a chain a little more narrow. Can you tell me if it works ok for you and you don't feel any vibrations when pedaling? And can you recommend me a good chain to change the old one? Best regards.

@UrbanDrivestyle 2 жыл бұрын

Hi SGA, thanks for your comment. So you feel the mentioned vibrations in the feet only in 6th and 7th gear while pedaling? Check your derailleur and the chain itself - maybe it's jumping or the derailleur needs some adjustment in the gear ratio between both highest gears. Your cassette/chain might also be worn out - have you made sure they're compatible with each other? We currently have two different chain types available - you can find them on our website! urbandrivestyle.com/products/x8-ept-premium-bike-chain?_pos=1&_sid=b30bc99fd&_ss=r Best regards!

@sga9431 2 жыл бұрын

Hi@@UrbanDrivestyle,thank you for the answer but I have already solved the problem this weekend. The problem was with the chain because it rubbed between the sprockets, this DNP Freewheel has slightly narrower sprockets than the old freewheel. Coincidentally, I found a solution on a forum, namely to try an SRAM chain that is a little narrower than the stock one, 6mm vs 7mm. Now I don't have any vibrations when pedaling, everything is ok. I solved the problem with an SRAM PC-850. :)

@UrbanDrivestyle 2 жыл бұрын

@@sga9431 Great feedback and super helpful for other riders, I'm sure! Thanks for that & keep riding safe & sound!

@ivana6141 Жыл бұрын

Is it possible to use a 9 or 11 gear cassette on these fat tyre ebikes?

@sergiolalopez3598 6 ай бұрын

I need help with a project. I have a DYU T1 and want to take the limiter off and change the cog size like yours but haven't a clue where the limiter is. Maybe in the motor? Do you think I will need to instal and LCD screen? It has not got one at the mo.ent, so no visible magnets on the rear wheel. Any advice at all would be awesome. Thank you.

@mozzjones6943 5 ай бұрын

You can't unlock the speed of this bike unfortunately. And you can't just add a display. You would need to change the controller with a compatible display, which has the customisable option to change speed limit. You would need to do some digging on where the controller is on the bike, What type it is (sensored/sensorless, size, output), and the connections it has (phase/throttle/hall wires ect), and take it from there. Good luck with that lol

@carlosthejackel7581 6 ай бұрын

Can this be done an engwe ep2

@sarajemms3292 Жыл бұрын

Hi. Whst is tje name of this Adabter, and whisch size . Thx

@paulwilkinson6977 4 жыл бұрын

sorry, i meant to say a larger sprocket,

@apertama 3 жыл бұрын

HI there, Got a question...This afternoon, When I tried to pedal, the freewheel is not biting at all, so I can move the pedal forward and backward, only freewheel turns but not turning the whole wheel at all. - what do you think the problem is? Thanks....

@rabbithomesteading3797 11 ай бұрын

I have no idea honestly. And this is a 2 year old question. but similar with the recoil on a briggs I believe but small engine recoil starter. I took it apart and cleaned it. I greased the balls that engaged the dog. The grease was to thick/tacky for it to engage the balls and they stuck without moving outwards to engage. I have no idea how these cassettes work as never looked into them but if you just regreased it maybe?... the issue? maybe...

@florentinoreyes3338 2 жыл бұрын

How much hub motor and rim for tire

@totalphixion1801 4 жыл бұрын

Nice some tooth finetuning...

@UrbanDrivestyle 4 жыл бұрын

Yes! Some minor adjustments have a huge impact!

@joyrdr 3 жыл бұрын

Hi, so I have the exact same freewheel replacement, the 11-34T DNP Freewheel. I had dropped off my ebike at a local bike shops to install the freewheel. They called me and told me that they need to perform a Rear Hub Overhaul to replace the freewheel. This would cost an additional $55, ridiculous. I think they were trying to con me. Does that sound right to you guys?

@UrbanDrivestyle 3 жыл бұрын

Hi joyrdr, thanks for your comment! They weren't necessarily trying to con you as they might have to change the entire hub motor lid with cassette/freewheel mount due to compatibility reasons. Keep in mind, that there are screw-on cassettes/freewheels and plug-on ones! We hope that helps!

@joyrdr 3 жыл бұрын

Thanks you very much for the response. Here is what I found out, the axel nut could not slide off of the cable, the cable connector was too big and the axel nut could not be removed. They tried sliding the Park Tool FR1.3 removal tool but the axel nut was 19mm and the removal tool can only accommodate up to 14mm. I just had them "force remove" the old freewheel and install the DNP 11-34T Freewheel. I also had them install MT5e Magura Hydraulic Brakes and Magura 203mm Brake Disc Rotors. Vielen Dank!! Oh and they didn't charge anything extra for removing the freewheel.

@mickyblue2u474 2 жыл бұрын

hi do you know the size of your spokes?

@paulwilkinson6977 4 жыл бұрын

is this any good for a 26 inch fat bike ?

@UrbanDrivestyle 4 жыл бұрын

The motor fits in any rim size, if you use the corresponding spoke lengths :-)

@ChrisTina-er4hj 6 жыл бұрын

Where can I get this sprocket?

@UrbanDrivestyle 6 жыл бұрын

Chris Tina in our Onlineshop right here: urbandrivestyle.com/collections/customisation-and-tuning/products/unimoke-7-speed-gear-11-32-teeths-with-freewheel-1