Finally a video that actually show how to take it out & fix it step by step....man I had such a hard time tryn to find a video like this....thank you thank you!!!
@arisofetch15276 жыл бұрын
I don't know why the company made the drawer like that Idk what they was thinking
@MelissaScarboro4 жыл бұрын
Shister Ty Next I heard it was to keep the drawers sturdy and so they would not fall over being that makeup can get really heavy. However I don’t know of anyone that is satisfied with their drawers the way they come.
@elizabethresurreccion72345 жыл бұрын
Seriously the best malm hack video I’ve seen. It was very in depth and talked through step by step. Others were not nearly as clear.
@CherelleDanae5 жыл бұрын
Thank you so much! Glad I could help
@vbenedetti12202 жыл бұрын
Thank you for your in depth explanation on how to do this! I’ve had my table for about 5 years now and have always wanted to extend the drawer! I had so much wasted space in the back. Finally worked up the courage to do it myself after watching your vid. 💪🏽❤️
@melwill162 жыл бұрын
Just purchased this and was able to follow your video and get full use of my draw from the start, also made another hole and aligned the draw. Thank you so much!!! Anyone buying this dressing table in the future should benefit from your video. Kudos to you for clear and concise instructions.
@amybrough522 Жыл бұрын
Thank you so much for making this video!! For years I have been annoyed that there is so much wasted space at the back of the drawer but thanks to your video I was able to fix that. My hero!
@jernabean2 жыл бұрын
I did it and it looks great! Thank you for mentioning that you don’t have to cut the other strip in the half. Good tip!
@wilkinsongonzalez9821 Жыл бұрын
My god, finally someone did it and recorded it. Thank you! We are doing this for all our drawers.
@TraverseEarth353 Жыл бұрын
Super frustrated with the my drawer!!! Thanks girl, you saved my sanity! Grateful for the step by step tutorial!
@ashleyjackson46123 жыл бұрын
The most helpful video I've seen showing how to do this... thank you so much 👌😊
@PaigeNichole64034 жыл бұрын
Thank you! I can finally see to the back of my drawer! I broke the metal piece as well but I just super glued it back on and it seems to be fine. The drawer just doesn’t open as smooth as it once did but it’s worth it to be able to use the whole thing
@CherelleDanae4 жыл бұрын
So glad I could help!
@leylas.84983 жыл бұрын
Thank youuuu so much 🥺🙏🏾🙏🏾🙏🏾that’s what i needed and now it’s perfect
@pa.moua-yang4 жыл бұрын
This is so helpful! Thanks so much for sharing!!!
@kv18153 жыл бұрын
Thank you so much! Those bloody drawers are driving me crazy! Will fix it this weekend.
@saniaminh3 жыл бұрын
Best so far how to video. Glad that I found you.
@gul10832 жыл бұрын
Thank you sooo mutch, I couldn't have done it without your help ❤❤❤
@FionaFaeryPsychicMedium4 жыл бұрын
Best video I’ve come across. Thank you so much
@CherelleDanae4 жыл бұрын
You’re welcome!
@yanniefung11562 жыл бұрын
I always wanna extend my drawer and luckily i found this!!! Thxxx
@Harves16 ай бұрын
Most helpful video ❤ thankyou!
@glimpses.of.fabs.4 жыл бұрын
Awesome job!!
@carmendee64816 жыл бұрын
So happy I found this video. Thank you.
@CherelleDanae6 жыл бұрын
you're welcome glad I could help. Because I know this annoyed the crap out of me!
@vshump6 жыл бұрын
You are so clever and handy. New subbie. How did you know what to do? Watching you now. You speech thing is hypnotic. Keep teaching us. Thanks.
@CherelleDanae6 жыл бұрын
Thank you and I just googled how to do it and figured why not make a video to show others who might want to do the same thing! I’m glad I could help!!
@dianak___12123 ай бұрын
hey I was wondering instead of cutting the rolling thing in half, would it work if I cut off 4 and only left 2 (2 on each side)? would the table open more?
@jewelzofthasea6 жыл бұрын
Wow very helpful video! Thanks so much!
@CherelleDanae6 жыл бұрын
No problem glad to help!
@jewelzofthasea6 жыл бұрын
Cherelle Danae i just got my table put together n had no idea the drawer was gonna be like tht so thank god for ur video. I will get my dad to do this this weekend 🙏🏾🙂
@ericanowak16515 жыл бұрын
Wow! So helpful! You should have your own HGTV show! SO handy! Quick question...did the green thingy come with or did you have to buy any extra tools/parts? I'm going to do this tonight with my Malm drawer. THank you!
@CherelleDanae5 жыл бұрын
lol thank you! and if you are talking about the wire cutter, the tool I used to cut the piece in half, then that didn't come with it I had to get that from my father.
@maxramsey78607 жыл бұрын
thanks for the tip!!
@CherelleDanae7 жыл бұрын
you're welcome glad to help!
@heidijohnson21366 жыл бұрын
You go girl!
@CherelleDanae6 жыл бұрын
Lol thank you!
@rubihernandez80672 жыл бұрын
Thanks!!!! Will be seeing if I can apply this to my pax trays!! Girl …. Can’t stress enough, wear gloves. It is dumb but your hand slips and a cut with the metal is painful. Been there and it hurts. Don’t ruin your pretty hands.
@rwanda236410 ай бұрын
Lifesaver
@user-dt9fo9cy8b2 жыл бұрын
Nice, thanks
@ElkeGallo16 күн бұрын
How many inches of unused drawer space is supposed to be left inside the back of drawer? We may have missed something, but we still have 2.5 inches of unused space. Is that all we get?
@imaprАй бұрын
So helpful!! I almost broke mine off 😅
@Trash1ey Жыл бұрын
Thanks! I read about this years ago, I think on that Ikea hackers forum, but your video made me want to finally try it! (Actually I begged my boyfriend to do it.) Did you find that when you put the drawer back in, after being all the way out, that you can't push it from too far left or too far right? Like, it closes crooked if I don't push from in the center. If I push back in from the left side, only the left side goes on & then the drawer is cock-eyed. Maybe we did something wrong?
@CherelleDanae Жыл бұрын
No mines does that as well. I always push it from the center and have no issues. I still have the same vanity and the drawer is fine!!
@zennn6656 Жыл бұрын
It seems this hack effects the stability of the drawer when being pulled out. Have you figured out a way to make it sturdier with the extension?
@christinevelez89656 ай бұрын
@zenn6656 curious to know as well before I buy this. Did you find a hack to make it more sturdy?
@CherelleDanae6 ай бұрын
I still have this same vanity, over six years, and it’s filled with makeup and I’ve had no problem with the drawers not being sturdy! It doesn’t hang low when pulled out or anything.
@dilan8535Ай бұрын
This little metal thing broke off what do i dooo???
@meryemg3802 Жыл бұрын
Hey! I broke off the the part thats sticking up from the black thing on one side. Is that really a problem?
@amandamacmillan89192 ай бұрын
Was it a problem? Because I did the same 😂
@sashamillar Жыл бұрын
I cant get the little black plastic bit off. If I break it off will it matter?
@zennn6656 Жыл бұрын
the black thing is what stops your drawer from opening all the way. You can see it in the video when she talks about it.
@prii25x32 жыл бұрын
What organizer did you get ?
@CherelleDanae2 жыл бұрын
I bought a bunch from amazon. I just searched clear acrylic drawer organizers. I can see if I can find the ones I bought. amzn.to/3mfTLt7 amzn.to/2ZqAz3C I bought two of the big ones and one set of the small ones
@MonicasVanity7 жыл бұрын
Great video!!! BTW don't have a man bend the metal piece...my man broke it😠
@emzy13lou5 жыл бұрын
Monica 'sVanity mine too does anyone know what to do about this?
@taylorforan28564 жыл бұрын
Emma Williams been a year what’d u guys do mine broke too😭😭😭
@saraev11193 жыл бұрын
Did you ever get it to work? I just superglue mine in place against the other piece of metal. Gotta wait for it to dry 100%. I cant believe I was so excited to build it and set it up, only to eff it up so bad that the drawer will fly off if this tiny metal piece isnt there.
@adestinydiary7 жыл бұрын
I love your channel ❤ new subby I make videos as well check me out ❤ & im literally in love with your hair could you do a video on how you kept your curls healthy as you went blonde thank you xoxo
@lushslastword29215 жыл бұрын
I broke the metal prong !!! fuckk
@GuidetteExpert Жыл бұрын
Theres literarly other holes you could have chosen! No need to cut anything.
@shakirawebb2747 жыл бұрын
When I was pushing the prarn up (that little metal piece) it fell off PLEASE HELP ME IDK WHAT TO DO
@emzy13lou5 жыл бұрын
Shakira Webb me too please help or tell me where to find out what to do if this happens?
@CherelleDanae5 жыл бұрын
You can try e6000 glue and try to just glue the piece back up there. It should hold the metal piece there
@IlesiaLewis5 жыл бұрын
Shakira Webb did the e6000 glue help
@lushslastword29215 жыл бұрын
@@IlesiaLewis idk how she has such a hard time with the pran ,mine fell right off lol. just pt the dresser together and I"ll actually use glue to secure the white stops and i I think it'll be fine.
@IlesiaLewis5 жыл бұрын
Silvana Roberson I will try glue... I just put it together and as long as I don’t pull to hard it is fine. They must have changed how they made that part since she made this video because mine just popped off very easily.