How to faux burl wood-Artisan Rooms

No video

How to faux burl wood-Artisan Rooms

Рет қаралды 260,259

Artisan Rooms

Күн бұрын

Пікірлер: 314

@Telelikeitis 8 жыл бұрын

This video is worth a million dollars to the wood grainer. Thank you very much for showing it to us.

@josephconsoli4128 4 жыл бұрын

I can't wait to use this on trim areas of a vintage radio I'm working on! Excellent vid.

@alanlawler6106 Ай бұрын

This has brought joy to me as a painter/decorator....I loved graining and always practice on absolutely anything I could fined....I'm going to do this on a mould lion I done in cement....this will wood effect will look class on it.....cheers man for this👏🏼👏🏼☘️🎨

@artisanrooms4701 Ай бұрын

@@alanlawler6106 That sounds awesome! Share pics when you finish it.

@c.golden7292 4 жыл бұрын

You can tell you are a pro. Thank you for sharing. And thank you, thank you, thank you for listing the products used. So many faux how-to's fail to do so. Great work.

@lesliesmall2581 4 ай бұрын

Move over Bob Ross! What a greatly presented clip. All information clearly conveyed and demonstration confident and clear. Very realistic and beautyful end result.

@iamtomkills 3 жыл бұрын

This is the best thing I’ve watched in a long time. Let old stuff in the garage breathe new life. Thank you so much for this.

@artisanrooms4701 3 жыл бұрын

Way to go Tom! Breathe some new life and sell some of that!!

@OBrienDesigns 3 жыл бұрын

Wow this video is amazing. I just searched the internet and KZfaq for literally 3 hours trying to find instructions on what you've just explained better than I ever could've hoped for. Thanks so much!

@artisanrooms4701 3 жыл бұрын

Thanks David, disappointed it took you three hours of searching before our video came up. Thought we were doing better in the search algorithm. Glad you liked it. Good luck on your project.

@OBrienDesigns 3 жыл бұрын

@@artisanrooms4701 haha nah don't blame the algorithm, blame me and my stupid habit of not using the correct search terms. Thanks again!

@bridgetteclifford5539 10 ай бұрын

This is exactly what I needed! I’m a theater scenic artist and while we use tinted water based sealers to achieve these faux finishes, the demonstration is perfect and exactly the same process.

@thomaschristopherwhite9043 5 жыл бұрын

It's insane how good that looks.

@bjewing723 Жыл бұрын

Excellent work. I didn't know I had this talent until I was in my 40's. I was hanging wallpaper in Vegas at the Bellagio during its' construction and watched a "special finisher" doing marble. I took to it like a fish to water. I wound up doing all aspects of faux in a dozen casinos over the next 5 years from granite pillars at the Venetian, all of the cherry finish in the piano bar at the Paris and repairing damage to a zebra wood wall at the MGM Grand. You couldn't see where the natural grain stopped and my repair began, It wasn't work at that point! I was being paid to do art I would have done for free! Beautiful burl. I'm going to wow the neighbors with a burl wood panel on my front porch. Love your technique!

@50LOVESIT 8 жыл бұрын

Stunning, I did the back of our entry door and with an Art Deco vanity , old timer relatives were very confused as to how it was faux painted! Getting inspired to do this again! Great help!

@artisanrooms4701 8 жыл бұрын

Glad you were inspired, thanks for watching

@jetlaggedchef6806 2 жыл бұрын

WOW! That came out AMAZING! As a woodworker hobbyist, this is invaluable! Great video.

@richardbradbury9105 3 жыл бұрын

Good work That’s a very old technique and was used in Victorian times especially with quartersawn Oak Grain. ‘Scrumbling’ 👍

@joselacera8716 7 жыл бұрын

THANK U SIR FOR THIS VIDEO IS THE BEST ONE I EVER SEEN IN MY LIFE GOD ANSWER EVERY QUESTION I THOUGHT THAT NO ONE CAN DO THIS I WAS WRONG YOU ARE MASTER I THANK U AGAIN SIR FROM A DAVETERAN

@englishrose4388 3 жыл бұрын

That is very impressive. I’m new to this channel-if you don’t already, I would love to see how to do a variety of faux woods and burls. This is amazing.

@flyurway 6 жыл бұрын

I have this Jag convertible that has a pair of subwoofers in the back, outboard of each side of the back seat. In order to add some mid/tweeters I had to build out so I made basically speaker fronts out of MDF that house the tweeters and encircles the woofers where the original grills went. It's about 1 3/4" thick so it sticks out, so I have this great brainstorm that I'll paint these fronts to match the wood burl in the dash. Thx for the tip! :)

@armandocast924 5 жыл бұрын

WOW, I have been looking for something like this for I project I have at home, It will be my first project of this kind, but thank you for your insight as to how to go about applying the finish, and most importantly the medium to use.

@maleamunoz229 3 жыл бұрын

This video is SO informative and extremely comprehensive. Thank you!!!

@artisanrooms4701 3 жыл бұрын

Thank you! Glad you found it informative.

@TheMaddog809 8 жыл бұрын

best wood graining video for burlwood! thank you!!!

@artisanrooms4701 8 жыл бұрын

Your welcome, glad you liked it.

@rosemary9489 3 ай бұрын

This is by far the best demonstration of creating a faux burl finish that I've seen, and I have been looking for a good one for a long time. I am a miniaturist, so I'm going to have to figure out how to reduce your techniques and tools for one-inch scale pieces, but it should be fun trying. Thanks!

@meme-du8xj Ай бұрын

Same. I'm a miniaturist and I've seen beds made with burl wood. I can't wait to try this

@coburnlowman 7 жыл бұрын

It's a great day to live in. I've worked I. machine shops that the owner had sectioned off because he was afraid we would take his ideas and run off with them. Now days folks care enough about what they do to share with others to keep their craft alive. This is great work and "looks" simple by the master but I'd probably make a mess the first several times.

@vitaliykrutchenko8454 7 жыл бұрын

wow, that was very impressive technique, I've learned a lot from just watching the video thank you for sharing Vitaliy

@artisanrooms4701 7 жыл бұрын

Vitaliy Krutchenko , Thank you Vitaliy.

@clydelewis850 2 жыл бұрын

For a long time i have admired the wood grain burl wood in the high end cars, Jaguar, Bently and always thought i what a wonderful addition to a car rebuild. With this video, channel i think i could do this. This is sooo good!!! Thank you for a great video!

@artisanrooms4701 2 жыл бұрын

Thank you Clyde, many rebuild enthusiasts have used this video to do their own finishes and we love seeing the results. Good luck with your project!

@lauraforconi9111 6 жыл бұрын

By the way, it's fantastic that you answer, I find that that, all real Master like you, answer and help. THANK YOU.

@seanmccall7277 2 жыл бұрын

Awesome video. Thank you for your altruism in sharing hard won knowledge.

@lauraforconi9111 4 жыл бұрын

AS I TOLD YOU SOMETIME AGO, YOU ARE THE BEST, I HAVE DONE AN AMAZING TABLE UNDER YOUR INSTRUCTION, I AM ABOUT TO DO ANOTHER PIECE, YOU ARE A REAL MASTER, PLEASE KEEP MAKING MORE VIDEOS, BY THE WAY, THE YOU EXPLAIN IS AMAZING!!!!!!!!!!!!!!! THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! AGAIN LAURA!!!!!!!!!!!!!!!!!!!!!

@artisanrooms4701 4 жыл бұрын

Laura Forconi , thank you!! So glad you found the video useful.

@jimh3362 2 жыл бұрын

BEST wood graining video I have seen!! Thanks.

@artisanrooms4701 2 жыл бұрын

Thank you Jim!

@yaseminguler 3 жыл бұрын

here is the video I am looking for. I have a bedroom set made in this style. I can now do my dining table like this. Thank you for teaching the technique.

@artisanrooms4701 3 жыл бұрын

You are welcome, glad you found the video helpful. Good luck with your dining table.

@lauraforconi9111 6 жыл бұрын

WOW, WHAT AN INCREDIBLE WORK!!!!!!!!!!!!!!!!!!!!!!

@ATimeToBeBorn1 2 ай бұрын

Great tutorial! Thank you!😊

@xpoxydesignz5003 2 жыл бұрын

Thank you very much for this tutorial.

@artisanrooms4701 Жыл бұрын

You are welcome! So glad you found it helpful.

@chiefcaptainmoroni1 6 жыл бұрын

How could you not be impressed by this? Super job.

@artisanrooms4701 6 жыл бұрын

chris little Thank you Chris!

@JohnRR 4 жыл бұрын

How cool. I'm going to try this on a $100 guitar kit. Thank you for demonstrating this step by step. I feel confident i can do this.

@arrowheadart3459 7 жыл бұрын

looks great! Ive used an artist medium, Liguin and artist oil paints before to make burl wood. Long open time and extremely scratch resistant I did it on my golf club driver to give it a super exotic wood look, and it holds up better than the factory paint process.

@artisanrooms4701 7 жыл бұрын

Arrowhead Art, I love liquin! I agree it's a great medium. How long did you have to wait for it to harden up enough for clear coat, and what did you use for clear coat? My golf swing needs work, I would probably ruin the finish.

@arrowheadart3459 7 жыл бұрын

Liquin drys faster if it is exposed to some heat or wait about 4 hours. Top coat was a tinted Liquin. I also did a set of TaylorMade white R-11's woods in quarter sawn oak 7 years ago and still play them. .Made the shafts look like old school hickory wood. Need Liquin i to be thicker?, mix some of the other stiff paste mediums to get just the right viscosity. Check out Arrowhead Putters. www.golfelites.com I make those putters with extreme adjustability. They say Liquin is not a good top coat for oil paintings. I have never seen any issues as a top coat, on my oil paintings or even exposed to the sun in other faux wood jobs that have direct south exposure. Normally I use tinted clear acrylics for faux wood projects. Real fast dry time. My faux site is www.artfauxdoors.com just a hobby so to speak

@brianmurphy2382 Ай бұрын

Good job,thanks for sharing!

@royrussell8531 6 ай бұрын

TOTALLY AWESOME VIDEO AND DEMONSTRATION, LOVE IT!!!

@momzilla9491 7 жыл бұрын

Hey Say. Was very glad to hear that you finished the project, and that you shared your opinion --- on your final results! Sorry that you weren t able to get your color right. I have a Burl Wood Credenza which is so lovely, It doesn t really get the lighting it deserves. Maybe... it wasn t that you didn t get the color right, but you didn t have the right lighting to showcase your hard work! hehehe EzEZFauxDecor countertop cover is a great alternative if Wallpapering soothes the nerves! I think it would be great to do this Burl with a virgin hardwood tree stump serving as a patio

@carybrown3192 7 ай бұрын

You're just amazing,I can't wait to try this technique,bravo!

@artisanrooms4701 Ай бұрын

@@carybrown3192 Thank you! Glad you enjoyed it.

@10MinutestoRouletteFortune 5 жыл бұрын

Outstanding work. Thanks for sharing the colors too!! My garage door will look awesome.

@artisanrooms4701 5 жыл бұрын

Oregon's Lonewolf, I bet it will, e mail or post pics on our Facebook page when you are done!

@charliegr202 2 жыл бұрын

Thank you for making this video. I purchased a burl wood console table and want to do a small table, that I already have, to match my new piece.

@user-bt1su7dn7p 4 ай бұрын

Great video!

@lauraforconi9111 4 жыл бұрын

I watch your videos very often, you are my HERO!!!!!!!! I THINK I ASKED YOU BEFORE, WOULD YOU DO THIS TO A ROLL UP DESK OR KITCHEN CABINETS???????????????? THANK YOU!!!!!!!!!!!!!! MY BEST LAURA.

@jaychan2649 7 жыл бұрын

thank you for this, sir! i just did a custom faux burl on my guitar and followed your guide... except instead of orange satin primer, i used a red glossy enamel.

@jasonkeene6779 7 жыл бұрын

dude what products did you use ? i wanna do my guitar too

@thomaslcrawford 2 жыл бұрын

Superb instructional video! I am so excited to try this now.

@mikebrodie6407 3 жыл бұрын

love it,cool process

@bettegregory4960 3 жыл бұрын

This is how to use stain! Best video ever!

@artisanrooms4701 4 жыл бұрын

That would be a really cool look on a guitar! If you are doing both sides, try rigging something up so you could hang it from somewhere on the neck so you could work all sides at once. Good luck, you're gonna rock this.

@JohnRR 4 жыл бұрын

Thanks, i could easily rig the body and access the surface from any angle. I guess i'll have to practise your technique a bit. Will check back when i finish the project. Starting in the summer vacation mid june probably.

@141cee1212 7 жыл бұрын

You do a great job of teaching this technique. Great project. I am getting ready to try this on a Model A dash.

@kindarts2743 7 жыл бұрын

very nice tutorials for learn.......great job.....

@rickb9118 6 жыл бұрын

Incredibly AWESOME! Trying tabletop this week. Wish me luck!

@artisanrooms4701 6 жыл бұрын

Hope all went well, and if you have not started yet...good luck on your project.

@rickb9118 6 жыл бұрын

Turned out AWESOME! I messed up the first time and started over. Everyone that's seen it has really liked it. I think I did too many spots, too small. But now I know how. The next one will be amazing. Too bad we can't post pictures here. You explained it PERFECTLY!

@artisanrooms4701 6 жыл бұрын

Glad it went well. My first attempts really sucked, but the more you do the better it gets.

@toneywoody6856 6 жыл бұрын

very wise man, I respect this guy

@vociferonheraldofthewinter2284 3 жыл бұрын

Bless you for putting the products list.

@Sam-gb2hq 2 жыл бұрын

I've got a wooden triumph dash project, this might work very well on!

@DanDDirges 4 жыл бұрын

Thank you for sharing this. I`m going to try this on a douglas fir wooden statue carving I just did since I blotch up the stain so bad hopefully this will cover it all up.

@cindyherget5196 7 жыл бұрын

You Made that look so easy I guess I'll just jump in and try it I'm more of a craft projects person I'll try this next time I do up a wood storage box. Now to figure out how to apply some of your techniques to some of my mixed media and paper projects I have going on in my head. Thank you.

@jewelbell5 Жыл бұрын

I thought it looked great after the bagging technique. Beautiful job!!

@artisanrooms4701 Жыл бұрын

Thanks! The devil is in the details and the little extra stuff.

@donteatthepaint8412 4 жыл бұрын

Absolutely amazing video. Thank you so much

@darrenwalton836 7 жыл бұрын

Wow I have an old defiant vintage radio I have just renewed, the finish has gone.so I will try this great technique.....thanks for the video... Dw

@Msez3aj 2 жыл бұрын

Awesome awesome thank you so much 💃🏽💃🏽

@KolesarTUBE 6 жыл бұрын

Awesome instruction! Thank you so much!!!

@artisanrooms4701 8 жыл бұрын

Use shellac or any acrylic clear coat spray with a satin or semigloss sheen from Home Depot or Lowes. If the oil glaze is not sticky you can brush on satin Lenmar Aqua plastic (it's my favorite).

@artisanrooms4701 6 жыл бұрын

Faux does mean false or fake so.....

@stewartfurini 6 жыл бұрын

Great video - thanks for sharing in such detail! Cheers.

@afzaalkhan.m 3 жыл бұрын

Wonderfully done and explained the process clearly .Thank you. Afzaal in .pakistan

@artisanrooms4701 3 жыл бұрын

you’re welcome

@CraigLafferty 4 жыл бұрын

Best video I have seen in a long time!

@artisanrooms4701 4 жыл бұрын

Craig Lafferty , Thanks Craig!

@saqibmian2010 8 жыл бұрын

Great work!!!!

@jonnybravo2418 7 жыл бұрын

dude David Cross is a beast at faux finish

@charlesbell752 6 жыл бұрын

Beautiful thanks for the tutorial.

@choosejoy1464 Жыл бұрын

So beautiful really!

@Kimshi4242 2 жыл бұрын

This is very cool

@megweiss1736 6 ай бұрын

I was wondering if and how to faux paint a burlwood finish that looks like a Restoration Hardware piece. This is a great video. I have two matching RH tall armoires that I would love to try this on. It might be too big of a project. Maybe there is a faux paint expert in San Diego. If anyone in SoCal knows of anyone let me know please.

@youssefsfofana3363 6 жыл бұрын

nice work thank you for sharing this video

@susanbellinger8313 7 жыл бұрын

Thank you! Wow!

7 жыл бұрын

Very nice, TY!

@lauraforconi9111 6 жыл бұрын

JUST WATCH YOUR VIDEO AGAIN, YOU ARE JUST AMAZING!!!!!!!!!!!!!!!!!!! WOW, I WISH YOU LIVED IN NY, I WOULD CLASSES FROM YOU!!!!!!!!!!!!!!!!!!!

@artisanrooms4701 6 жыл бұрын

Thank you Laura!

@mele9627 6 жыл бұрын

Pure Artistry! Thanks for sharing

@say11911 7 жыл бұрын

This is EXACTLY the technique I have been searching for on my countertop project. How to get that blended, organic faux look with the randomness and pattern that resembles granite. Between this and the feather technique for veining I am exited to get started. And if I mess up, I can just go over it again, or sand/prime and start again. Grabbing a test piece of MDF after typing this.

@artisanrooms4701 7 жыл бұрын

say11911 I hope it went well.

@momzilla9491 7 жыл бұрын

Hey Say, I am on line doing exactly what you were searching for. A unique way to refinish my countertop! Have you finished this project yet? Would love to know how it turned out!

@say11911 7 жыл бұрын

I did finish the project and the more I did, the better I got. The biggest part was finding the paint I liked. I had practiced with different colors and in the end it was difficult to get the color I liked - the technique was good, but I wasn't happy with the end look. So I went with EZFauxDecor countertop cover - the white marble. My longest countertop run was 15 1/4 ft. What are your project particulars: (countertop material, backsplash, total sq. ft.) Now for my carpet to hardwood stair project THIS WORKED LIKE A CHARM! Because my stairs were intended to be carpeted in my two story home, they were beat up too much to sand away problems and stain the natural wood. So I put down Kilz original (2 Coats) over treads and runners tinted a lighter orange than what he used in the video, and did a faux wood technique over smooth, patched stairs, with 5 total coats of poly, - 3 coats diluted 3-1 parts oil semi-gloss. Smooth and shiny.

@say11911 7 жыл бұрын

+1Artisan Rooms Thanks, I definitely learned a lot on this project - as I seem to on most of them actually. The color I could never get to look right with the contemporary cabinets and traditional backsplash. But I used this on my carpet stairs to hardwood project and it worked perfectly! I was shocked to see how effective, random, and beautiful each tread came out. Working with wet and blending gives that natural look, and the oils are so strong. 5 coats of semi-gloss poly (3 diluted to 3-1 oil/mineral spirits) and they really accentuate a part of the house that was common. Thank you, this technique really gave me remarkable results.

@MrMass-jm4ku 6 жыл бұрын

That was awesome. Thanks Michael! How do you reckon this would have been done in the early 1800's? I've been trying to find out for a while, any ideas would be greatly appreciated.

@artisanrooms4701 6 жыл бұрын

Mr.Mass , they would have used artist oils mixed with a thinning vehicle such as linseed or flaxseed oil. Water based paints like gauche could be mixed with beer to form a glaze as well. Clear isolation coats would have been done with varnish or shellack. Many decorative artists still use these techniques today, they may just take longer but the alchemy is still the same. Modern products just make consistency of color and speed a possibility. Thanks for your comment and question.

@MrMass-jm4ku 6 жыл бұрын

Artisan Rooms, thank you so much, I have a ten week project with the university of Brighton which I'm trying to recreate some of the beauty seen in the royal pavilion. I tried the linseed and oil paints, but hadn't ever thought of mixing water colours with beer to create a glaze. Coffee and vinegar mixed with a pinch of ink worked okay. But not what I wanted. I'll get my digging game on. Thank you so much again, really helpful.

@seambrose27 7 ай бұрын

I'm so glad I found this video. do you have any other faux wood demos? This is brilliant! thanks so much.

@artisanrooms4701 6 ай бұрын

Currently we do not, however, we plan on doing a bunch of how to videos in the future. Check out our instagram in the meantime @artisanrooms

@artisanrooms4701 6 ай бұрын

We do have this one on there though… kzfaq.info/get/bejne/kOCkqcKAtce1pXU.htmlfeature=shared

@user-ds8jp8fj8m 5 ай бұрын

Absolutely wonderful work! I’m trying to find what colors you used on your first two stains, I’m dying to try this!

@artisanrooms4701 6 жыл бұрын

Debora, yes you can, I get a lot of questions and e-mails from folks restoring cars and wanting to do the dash in burl.

@trivigonzales 4 жыл бұрын

Can these products you used be applied to metal (classic car interior trims and dash) And will I be able to apply automotive clear coat over these products? Can you contact me @ David.Gonzalez@stsjv.com thanks

@artisanrooms4701 4 жыл бұрын

Trivi gee , yes to all. Good luck with your project.

@nedstar7378 6 жыл бұрын

Excellent video, thanks a lot.

@artisanrooms4701 6 жыл бұрын

ned star Thank you Ned!

@stevieanderson4685 7 жыл бұрын

that was amazing. thanks

@Wisteria_Lane 2 жыл бұрын

Genius!!!

@paulbriggs3072 Жыл бұрын

Very good! Historically, varnishes were meticulously done, usually using shellac or shellac and oil in French polishing for a very rich and certain appearance. I wonder what your finishes would look like if someone did French polishing or even a hand rubbed shellac finish over it. Maybe do a video of a sample where it's French polished.

@ClauduArteSa 7 жыл бұрын

Great job! Thanks!

@Cattyonines 2 ай бұрын

Hello. Thank you for this guide. Looks amazing. However, I can’t seem to get gel stain in the UK for a reasonable price. I’m wondering if you can suggest an alternatives?

@joemihalchick2620 7 жыл бұрын

I would really love to try this, my only question is it an oil base top coat you have to use though? Thanks for this great instructional video. i have a fore place mantel this would look great on.

@PerfectWoodGrain Жыл бұрын

Very cool. Though I prefer modern acrylic faux finishing glazes vs the toxic oils... Still nice work.

@prohm1 7 жыл бұрын

Sensational, thank you for generous knowledge.I live in Sydney and have not been able to find any glaze or the products you use.Any suggestions on how to get it sent internationally?Thanks

@TheCecil64 8 жыл бұрын

Thanks for sharing.

@jsliveedgedesignwoodworkin2602 7 жыл бұрын

Looks great man

@anthonylemus629 7 жыл бұрын

THANK YOU

@TheMaddog809 8 жыл бұрын

excellent! will do, thank again!!

@sidnoi 6 ай бұрын

Greetings from UK Michael. I wonder how this process would work in 2024 with paints and laquers going VOC free and water based. Can you demo a 2024 version with water based materials? will it work? Thank you.

@ozkrpalminteri9431 Жыл бұрын

Unbelievable 👍

@t5l239 Жыл бұрын

Burl wood is back!

@laurenmilbank3775 7 жыл бұрын

Love this! Thanks for sharing. Letting the clear spray layer dry completely before final toning? Thinking yes, but better to ask than forge ahead and find out differently.

@scotsman6712 6 жыл бұрын

Lauren Milbank yes.each layer must be dry before the next is applied.

@alish2852 7 жыл бұрын

Fantastic

@txgreek1 Жыл бұрын

Great video, thank you, what are the 2 colors you used , the one for the gel stain and the lighter one for the wiping stain?

@brendaclarkknudsvig5754 Жыл бұрын

How would you make antique maple wood look like rosewood, for a vanity?

@jasminebible9997 4 жыл бұрын

This is so awesome! Thank you for such a great explanation. I can't wait to try it! Would you mind sharing the colors of gel stain and wiping stain that you used? I know you mentioned that both are by Old Masters, but I didn't catch the color names. Thank you!!!

@jasminebible9997 4 жыл бұрын

Ummm....I just realized the colors are in the description...duh. Thanks again for an awesome video!