Great Video. have the same challange ahead here in Namibia now 🙂

Thanks for your video. I’m in Australia and labour are extremely expensive here. I think I’m going to attempt this myself. Thanks for each detail in explaining. It looks like hard work and lots of hours. I cant get a Sipho here by my boys can help hopefully. Cheers

Love your discription of a spirit level!

Great video. Just what I needed to know to be able to supervise my contractor, who started off with a bang ten days ago and has turned out to be a bit of a "fly-by-night" . Delays mostly because of rain but also because his main worker went to a wedding in Mozambique after day one and has not yet come back ....

I am a pool specialist and you did an excellent job

Thx for sharing.

wow. excellent video.. Thank you.

Brilliant video. Everything is very well explained. Thanks so much for sharing , but I have just 1 question ?? when can I come and swim in the fantsic pool , all the best from Robert UK London.

Do you still have Sipho and Shepard's detail and would you still recommend them?

How do you seal around the pool fittings. Lights, skimmers and jets etc. Thanks looks great

What do you do around the lights and the waterjets. I mean you can't really go behind them with the fiber glass.

Hello, Is it possible to have a update on how the pool is doing now.

Great help indeed! Not started yet but your video has given me encouragement!

Hi Thanks for video. Looks very well done Do you remember how long and estimate what it costed?

After the fibre glass was the surface sanded down? Thanks for a very well documented video. What was the cost of the material used?

What was the final blue paint coating? Thank you for sharing.

This was 6 years ago and I guess it is broken again, right???

This was very informative for me personally as i was in this project monitoring my contract... they were so worried because i knew most of the things they were doing🤣🤣

Brilliant video. Everything is very well explained. Thanks so much

Love the burglar bars on the house. When will the grenade screens be going up. Lol

Awesome job done. Where is the best place in Johannesburg to get all the materials from?

Great video thank you. Did you get the stick-on tiles from Nivitex cause I couldn't find it on their website. Please advise about the durability of the flexible vs the glass tiles. Thank you.

Hi, thanks for sharing this very helpful video. I currently have a plastered pool would I need to sand all the gunite down to plaster or can I apply fiberglass over it?

I have a 6x2 small fish pond which is built using concrete and tiled on top of it. It is lleaking and getting into the house wall as well. How to solve this issue without removing the tiles ? It is a new concrete tank. I guess it may leak for sometime and will stop after sometime ?

Sir what paint do you use for a fiberglass swimming pool a gelcoat

I’ve just had my Fibre glass pool resurfaced but the mosaic strips have come out very rough almost like a sand paper. Any idea why and how it can be fixed?

Three man job ,. one to watch while other two work!

Pool pain yes.

If my pool has a floor drain can i still fiberglass it?

did you use epoxy resin or polyester resin to make the fiberglass?

Hi, thanks for the thorough info on how to do this. I intend plastic fibre coating an existing concrete 'above ground' pool. It was originally a 'cisterna' for storing water for a small holding ut it was then tiled as a pool. After 5 years or so, the cracks have become too much and its near impossible to find them or cure them with tiles in the way. I am going to clear the tiles- clean and then coat in a similar way to you. Two questions...First, mine has very acute corners and I wonder if I should add round edges or will the fibre sheets accept being folded through nearly 90 degrees? Secondly, do you have a product name for the sheeting you used- The company you quote seems to have many options and as I am not in S.A. its not really fair asking them. Thanks again and good luck to anybody else who is going to try doing this!

Thanks a lot for the video. How is your pool looking now, if I may ask? We also stay in SA and are looking at giving a facelift to our pool.

please explain what is this csm mat? is it a cotton mat normally used in agriculture fields to control weeds or is it a fiber glass mat which is very expensive?

I know this is old hope you can reply, how much gelcoat did you use, my pool has same surface as mine the guys are trying to sell me 60 kg of getcoat paint it seems like too much.

I'm doing the same thing in my pool . My vendor says it would be the frp thickness on my concerete pool will be 3mm . Is this enough? Need help please

Did you say that you used cement WITHOUT SAND to plaster the walls? What kind of thickness did that give you on the plaster?

I'm surprised you didn't remove the brick and start a layer that would be under the brick. That should eliminate any water seeping through the seam between the different materials.

Thank you - how is the pool now?

Interesting, we don't use fiberglass finish in the US for in-ground pools. You guys also use Diamond Brite or Pebble Tec finish?

Which mat is the best to apply? Chopped Strand Mat Roll 40kg Roll - 400g, 600g or 800g?

What is the border called and where can I find it? It's beautiful and would like to add it to our pool. Thanks.

Hello, That looks a nice job, hope you don't mind I have a couple of questions. The gap under the coping stone what size was this, where you tucked the mating into. Also did you have to use anything else to seal between the coping stone and the fiberglass. Going down this road ourselves as we can't find anyone here in France that is willing to do this . Thanks for a great video. Chis

How many layers of sheets did you put down? How much did this cost you in Rand and where did you get materials from?

how many layer of fiber cloth or mat was installed in the whole surface of the pool?

I am no pool worker. I own a concrete pool which i am thinking about applying a fiberglass layer to. My pool was previously painted. Do i need to remove the paint layer first?

Any problems with black mambas?

I have to do the same to my pool, could you put me in touch with the two guys that helped you?

How is the pool doing now? Has in needed any maintenance?

Hos many yards of the CSM did you guys use total?

if ya lucky

hi - what material did you use and where did you purchase it from? great Job by the way :)

Be sure to use a solid roller so as to remove the air...

is the blue stuff paint or gel coat?

how much does 1 m2 of mat consume resine

Hello dear friend How many layers are used?

Is this known as an inground pool with a fiber glass lining?

Great job! Can we contact you?

Good job, I was just looking forward to some video with water in or people swimming, anyway it's just me

Hi. How big is your pool (square meters)? And how many of the following did you use for your pool: 25l drums of resin, catalyst, fiber mat and acetone. My pool looks about the same size as yours and need to do the fiberglass next weekend. Thanks for the very helpful video :)

When you removed the old fiberglass, why didn't you just stay with the concrete instead of adding the fiberglass again. Fiberglass and resins doesn't bond to concrete and will just delaminate again. I repair these fiberglass over concrete pools all the time and have to fix the delaminating on most all of them.

Hi, HOW MUCH WAS YOUR PROJECT COST TOTOALLY? THANKS

Hi there could you send me the numbers of the guys that helped you?

Would have got it done faster if u would have worked as hard as the black guys.

Are you able to share the guys who helped you contact details? Or can you please email it to me?

You in dbn or jhb

everything goes well but my brothers when comes to mosaics please apply flow coat before applying the mosaic so it can shine blue direct to the mosaic sheets

As you can see that the Fiberglass did not bond to the concrete in the first place. Why not refinish out the concrete surfaces instead of reapplying the fiberglass to the concrete that will not bond again? I have a Fiberglass Pool refinishing company and run across a lot of this type of Fiberglass and concrete pools, most of them the fiberglass has come loose, not bonding to the concrete and is causing problems.

the process of this pool will give you about a 3 year warranty

Whoever Installed the original didn't get the right thickness there was not even close to a chance that was near 10mm thickness. That looked paper-thin A proper install would need a grinder to remove lol

Need to buy yr friends some new shoes and clothes.😁

what us? i see two workers. they should have mask on as well and eye goggles and as the owner it was your responsibility they were safe. and when you say, 'i'm using...' , you mean the men doing the work

DIY, a little bit, with the 2 black guys you hired doing most of the work.