how to fill, the gaps, of the pine wood floor

Рет қаралды 54,976

Refinishing hardwood floors : Ermes12

Жыл бұрын

in this video. show you how to sending pine floors and how to fill the gaps of the pine wood floor
👋.👷‍♂️.🖐
======================================
these procedures were used in this project is.
first procedure to do is to punch the nails. and first procedure mashin hummel disc 24. then proceed with number 50. and finally use the disc 100. then also with the corners spread the Edger disc 24 then 50 and at the end use the Festool disc 80 for the corners. and the last procedure uses hand sand with paper -120 or paper -150.
and the product to fill the gaps on the wooden floor is jenkins joint filler
_____________________________________________
👋.👷‍♂️.😊..thank you for choosing my video, see you soon for new videos ...😊
If you have any doubts on how to carry out these procedures, please do. write me on messages thanks
======================================
grazie di aver scelto il mio video ci si vede a breve per novi video 👋.👷‍♂️.😊
se avete qualche dubbio come fare realizare queste procedure da fare. scrivetemi su gli messaggi grazie
✌️.👷‍♂️ follow my channel. 👋.👷‍♂️
======================================
#basicwoodworking #woodwork #woodworkingprojects #wood #woodworkinguk #flooring
#refinishinghardwoodfloorsyourselfr

Пікірлер: 91

@user-qw6eq3dx4w 8 ай бұрын

Faunistico un lavoro ben fatto 👍 ✔️ 👍 ✔️ 👍

@lutomyrto5342 Жыл бұрын

Good works as always 😎😎👌👌

@t.1erme747 Жыл бұрын

Very nice work 👍👍

@healthy_lifeee Жыл бұрын

Thank you for your good page😍👏

@Ermes12FloorSander Жыл бұрын

thank you very much 🙏

@drieseggermont8158 Жыл бұрын

Thx! Greetings from Belgium

@Ermes12FloorSander Жыл бұрын

👷‍♂️🙏👍

@johnnym3860 11 ай бұрын

Great video

@Ermes12FloorSander 11 ай бұрын

Thanks

@tonybrannen1740 Жыл бұрын

Too much rapid movement

@Ermes12FloorSander Жыл бұрын

I will try to improve the next videos 📹 thanks for your comment

@szynszylaluminiowy1773 8 ай бұрын

I have a floor from 60's much worse than these. Some spaces bigger than 5mm. Would you recommend to inject something to this bigger gaps or just pray that it will not crack or fall inside? Maybe it would be a good idea to move some of the boards, but I'm a bit afraid to look there..

@Ermes12FloorSander 8 ай бұрын

Hi ,thank you for the coment . For biger gaps you can use wood strips to fill the big gaps and filler for the smaller ones .it would be an extra expense but cheaper then moving all the boards .

@kmontgomery3690 6 ай бұрын

Did you do this upstairs as well where the floor had floor boards pulled out and white paint stains?

@Ermes12FloorSander 6 ай бұрын

Yes, the same thing was certainly done upstairs too

@Dougie-ex1ov 8 ай бұрын

So my dog chewed in big holes and I want to fill them in to reform the door corners and such. Would this product work well to blend in with the pine?

@Ermes12FloorSander 8 ай бұрын

ttwo pack wood filler and then pine colour varnish to cover it .

@levrone0075 Жыл бұрын

That's impressive, great work clearly shows pride passion for your job!

@Ermes12FloorSander Жыл бұрын

Thank you very much!🙏👷‍♂️

@BeccaAl 5 ай бұрын

Hi, thanks for the video. what is the product from the natural wood floor company please?I've managed to identify the others but I just can't tell what that is. I can't even find it on their website . thank you

@Ermes12FloorSander 5 ай бұрын

the product name for wood filler jenkins joint filler. instead for the color the name and saicos multi top lacquer mix with extra weib white

@BeccaAl 5 ай бұрын

@@Ermes12FloorSander thanks for the reply. I can’t find the product, you’ve called ‘extra weib white’ what is it?

@Ermes12FloorSander 5 ай бұрын

SAICOS Extra White - supplement and a product that mixes with Saicos Ecoline Multi Top Lacquer

@unfocusedjoker4374 3 ай бұрын

That's gonna shrink and crack as the floor breathes!

@Ermes12FloorSander 3 ай бұрын

Yes, for reasons the wider spaces will fall. because pine wood changes shape over time. and filler doesn't stay long depends on how we treat our floor. example if by chance we often use water 💧. The floor will change shape more often. and the filler will fall off. I always explain to clients that the filler is not very long-lasting over time. before we proceed 😊

@Ermes12FloorSander 3 ай бұрын

thanks for the comment .👍👷‍♂️

@gunship4741 Жыл бұрын

What kind of sander is the disk one thats a nice one

@Ermes12FloorSander Жыл бұрын

the name is lagler edger

@Ermes12FloorSander Жыл бұрын

thanks for your comment 👍👷‍♂️

@Richard31406 Жыл бұрын

had a seizure from the rapid video.....

@ivelauwagie3372 6 ай бұрын

After you used the joint filler, do u sand the floor again?

@Ermes12FloorSander 6 ай бұрын

Yes the floor needs to be sanded again

@adammanley2779 Ай бұрын

@@Ermes12FloorSander do you sand with same grit as before? (I.e 24 grit up to 120) or do you only require a higher grit for 1 pass (I.e 1 pass with 120 grit). Cheers

@Ermes12FloorSander Ай бұрын

Yes the same grit paper .

@BrightonDunkz Жыл бұрын

Hi, lovely looking floor. Did you sand again after you added the filler/sawdust mix or did you at the lacquer on straightaway? Thanks

@Ermes12FloorSander Жыл бұрын

yes after putting the filler your need to send the floor again

@Ermes12FloorSander Жыл бұрын

before putting the color

@Ermes12FloorSander Жыл бұрын

thanks for your comment 👋👷‍♂️

@CrimeVictimsProtection 4 ай бұрын

He had to fine grit buff it obviously

@dgar7272 7 ай бұрын

No sanding after the filler???

@Ermes12FloorSander 7 ай бұрын

yes you need to sand after

@Ermes12FloorSander 7 ай бұрын

after applying the filter it is necessary to sand the floor

@Ermes12FloorSander 7 ай бұрын

but the best thing is that it is better to leave the filler for 30 minutes to dry well, then after that I sand the floor again

@jonneymendoza Жыл бұрын

how long did it take to do?

@Ermes12FloorSander Жыл бұрын

a week of work in 3 people to make the whole house 🏡

@Ermes12FloorSander Жыл бұрын

Thanks for your comment 👍👷‍♂️

@heyday179 Жыл бұрын

what is jenkins joint filler. shelack? glue? what

@Ermes12FloorSander Жыл бұрын

jenkins joint filler and a clear cola gel to fill the gaps in the floor. 👍

@CrimeVictimsProtection 4 ай бұрын

Resin

@peaslead Жыл бұрын

What product were you pouring onto the dust for the wood filler?

@Ermes12FloorSander Жыл бұрын

the product name is called Jenkins joint filler

@peaslead Жыл бұрын

@@Ermes12FloorSander Thank you I did find that later in this video or a different one in the comments. :)

@Ermes12FloorSander Жыл бұрын

@@peaslead thanks for your message

@gary24752 7 ай бұрын

@@Ermes12FloorSander How strong an odor is there when using that?

@Ermes12FloorSander 7 ай бұрын

the smell is strong I recommend you use a mask for safety 👷‍♂️

@unfocusedjoker4374 3 ай бұрын

That looks like a pine floor not hardwood. Use pine slivers and clean out the gaps between the boards. Use loads of glue.

@Ermes12FloorSander 3 ай бұрын

Thanks for the tip 👍👷‍♂️

@user-volk999 2 ай бұрын

Это черновой пол и как бы вы не делали -будет как в сарае, мне жалко ваши деньги😢 если вы наймёте людей отдадите большие деньги ,а на выходе получите -так себе😅

@Ermes12FloorSander 2 ай бұрын

what do yiu recomend i do instead

@duncanmatthews1654 Жыл бұрын

Hiya what's the stuff you were mixing with the sawdust please?

@Ermes12FloorSander Жыл бұрын

the product name is jenkins joint filler

@Ermes12FloorSander Жыл бұрын

and thanks for watching my video 👋👷‍♂️👍

@kierand9410 Жыл бұрын

@@Ermes12FloorSander Great video. Is it always wise to fill in the gaps or do the floorboards need space to expand over temperature variations?

@Ermes12FloorSander Жыл бұрын

The floor itself is an old pine floor that has matured but even so the filler itself its not strong enough to withstand the force of the wood thus if that happens the filler will either fall down or pop up ,so in the long run the filler will eventually fall .That's why we recommend best not to fill but some costumers want it even with the short life expectancy of 6 months to a year .

@kierand9410 Жыл бұрын

@@Ermes12FloorSander Thanks for following up. Makes a lot of sense. So you’d recommend just living with the gaps, or, as I’ve seen done elsewhere where the gaps are particularly large, pull them up, re-space them closer together and fill in the end with a reclaimed plank?

@patcomerford6260 Жыл бұрын

But what are the names of the materials you use, quantities, etc. Not telling us the products used makes this upload only about grandstanding!😕

@Ermes12FloorSander Жыл бұрын

and thank you for your comment

@Ermes12FloorSander Жыл бұрын

these procedures were used in this project is. first procedure to do is to punch the nails. and first procedure mashin hummel disc 24. then proceed with number 50. and finally use the disc 100. then also with the corners sand with Edger disc 24 then 50 and at the end use the Festool disc 80 for the corners. and the last procedure uses hand sand with paper -120 or paper -150. and the product to fill the gaps on the wooden floor is jenkins joint filler

@patcomerford6260 Жыл бұрын

@@Ermes12FloorSander Thank you so much.

@joshuapearce8623 Жыл бұрын

Both that hummel and edge sander are stolen

@Ermes12FloorSander Жыл бұрын

hummel the edge is also not stolen material.! but anyway thanks for the message

@colemeeker908 Жыл бұрын

NOT helpful. I didn’t come here to jam out to dance tunes, and would find it way more helpful to know what products you are using.

@Ermes12FloorSander Жыл бұрын

hi the product to fill gaps on a wooden floor is called JENKINS JOINT FILLER GEL. instead the floor sander is called Lagler Hummel 8 inch Belt Floor Sander. instead the small sander is called lagler flip edge sander.

@Ermes12FloorSander Жыл бұрын

thanks for your comment 👍👷‍♂️

@phillipbrennan7082 Жыл бұрын

Shut up Cole you filthy donkey

@justinm.5486 9 ай бұрын

It’s in the description as well, so it’s more than helpful 😂 some people’s kids I tell you

@Mostviews111 Жыл бұрын

Sloooowww down makes me want to throw up watching it.

@Ermes12FloorSander Жыл бұрын

Thanks for your comment, I'll try to make the videos better 📹 next time. and have a nice day 👋👷‍♂️

@LonnyRodriquezLive 12 сағат бұрын

As a beginner, this didn’t really teach me anything because I don’t know what you’re doing. 😩

@Ermes12FloorSander 2 сағат бұрын

I understand tell me how I can help you.👷‍♂️

@robertedwardleesmyth7669 5 ай бұрын

So unhelpful without knowing what you are using

@Ermes12FloorSander 5 ай бұрын

the color applied is called saicos multi top lacquer mix with extra weib white. and instead the product to fill the spaces on the floor is called Jenkins joint filler

@Ermes12FloorSander 5 ай бұрын

thanks for your comment