How to find a short in a modern car fast and easy (The correct way)

Рет қаралды 2,456,215

Күн бұрын

This video explains the followings
---------------------------------------------------------
How to find an electric short in a car or truck that drains the battery overnight
How to do a parasitic current draw test with a multimeter in a modern car
How to find an electrical short to ground
How to diagnose a short using multimeter
How automotive relays and fuses work
Best way to perform a parasitic current draw test in a modern car
How to use a short or open circuit finder (cable tracker) to find a short
How to find a parasitic battery drain
This test will only tell you how to find a short circuit, If you have a open circuit in your wiring, This method wouldn't work.
How to properly test an alternator in a modern car
• How to Test an Alterna...
How to properly test a car battery
• How to Test a Car Batt...
How to use a multimeter for beginners
• How to Use a MULTIMETE...
Featured products
Fluke 87-V Digital Multi meter amzn.to/2ye7aYx
Cheap multimeter amzn.to/2Rs5pQy
Test Lead Set & Alligator Clips amzn.to/2Nmzj5d
Push-On Alligator Clips for Test Leads amzn.to/493LRcQ
Automotive Relay Tester for common relay sizes amzn.to/3Qa7Q9t
Automotive Relay Tester for most relays amzn.to/3Qr8WPr
Short/Open Electrical Circuit Tester amzn.to/2Rr9IeD
Cheap short finder amzn.to/2ydA8Yy
Light duty battery charger for cars and suvs
amzn.to/46D9QxZ
Heavy duty battery charger for 24v heavy vehicles
amzn.to/46D9MOL
Light duty Jump starter for small cars and suvs
amzn.to/3Q5G7Xw
Medium duty Jump starter for large cars and suvs
amzn.to/45MQqVX
Heavy duty Jump starter for 24v heavy diesel vehicles and machinery
amzn.to/3rUsC4X
Junky DIY Guy's official merch, Thank you very much for supporting the channel
/ junkydiyguy
And don't forget to follow me on Instagram for more updates
/ junkydiyguy

Пікірлер: 906

@JunkyDIYguy 5 жыл бұрын

Guys, check out my latest video kzfaq.info/get/bejne/i61lZ9ulmpzZiqM.html

@thebravo1994 5 жыл бұрын

Junky DIY guy pull a fuse and wake a computer up and u have to start all over again voltage drops and amps testing is only way

@filisix 5 жыл бұрын

@gman20031 5 жыл бұрын

I need help in my 2018 Camry, I must of shorted out something when tapping into a wire for a led light, now the lights around my radio do not come on and all other interior lights are dim, but everything else works as it should including the radio, any advise would be great.

@johnjcb4690 5 жыл бұрын

can you do one for the Keys not moving in the ingition( column steer lock/ ignition Cylinder lock Fix )-

@flightofthefatman 5 жыл бұрын

@@gman20031 Check no fuses have been blown. If not do a parasitic draw to find which circuit is affected. Then obtain the wiring diagram for that circuit and then isolate the problem area by voltage drop testing. Dim lights means that there is resistance on that circuit which is taking voltage away from the lights. If the fuse for the lights that don't work is blown and you replace the fuse with the correct rated fuse and it blows again then you have a short circuit on that components electrical circuit. You will need to do a voltage drop test as well using a wiring. diagram

@elieli8368 Жыл бұрын

Sweet, short, no loud background, straight to the point, well prepared, excellent camera angles and easy to understand the narrator

@JunkyDIYguy 6 жыл бұрын

You guys wanna know "How to STOP BRAKE SQUEAKING in your car kzfaq.info/get/bejne/n9x9dZeIqq3LiqM.html How to Properly Replace Brake Pads and Rotors kzfaq.info/get/bejne/mdeIktJlx67VZok.html

@williamcampbell5204 6 жыл бұрын

Junky DIY guy p.

@user-bo7ti7rw7l 5 жыл бұрын

Junky DIY guy: I have a question. How do you chase the wiring harness on the radio if there is a short circuit . Do you have to remove or uninstall the radio from the dashboard ?

@ernec.5326 4 жыл бұрын

I learned so much from this and all I know is to check my oil lol. So comprehensive and easy to understand. Way better than the other channels.

@duncan1945 2 жыл бұрын

Junky you are a star. Best video i have seen for my problem with a fuse that keeps blowing. Very precise and interesting. Thanks for saving the day. All the best Duncan Cornwall UK.

@midlandernc7403 5 жыл бұрын

Your the best man. Clear concise not a lot of setup babble, frank and to the point. Best I've seen. Thank you for the clarity.

@JunkyDIYguy 5 жыл бұрын

thanks man

@pawswet9476 2 жыл бұрын

Excellent content! This is the first automotive content creator I’ve ever heard with such good knowledge combined with an ability to explain using simple and concise terms.

@dunkelec 4 жыл бұрын

You can also do the same thing by using a small 12v bulb with leads and alligator clips attached in place of the meter connected between the battery minus post and the ground terminal wire you have first removed. It will light when there is even a tiny parasitic current flowing. The brighter the light then the more the current draw. If you want to try it out then hookup the light as described and open the glove box or a door. The light will get very bright. I learned this from an old mechanic. Be careful out there.

@reeferman206 Жыл бұрын

Who the hell needs a mechanic when i have your videos to watch! Another great video that helped me a lot! Thanks!😁

@carlosarias3460 Жыл бұрын

This Guy ROCKS! He explains things in a very clear and understandinable way. He also includes all the steps in the process.

@harrellNOAA 5 жыл бұрын

Outstanding. I love your style - I mean the way you show and tell. It helps me to follow along better. I appreciate your taking time to make videos like this. I have saved a lot of money from videos like yours and not only that, but also the feeling of accomplishment that goes along with fixing things on your own. I've been the kind of guy who fixes just about everything my entire life, but electronics in cars has been my weak spot. So thanks for the help.

@wildboarjungle3995 Жыл бұрын

Yes ,,his info is easier to understand ; Clear with diagram ..

@tsakaln1 3 жыл бұрын

Amazingly clear and concise. SOOOO well done. Thank you and Bravo for this great tutorial!

@johnvallejo3211 5 жыл бұрын

Finally, A well made vidio that explains and is teaching "How To" in very basic and elementary terms. Thank you for this vidio.

@jaylong5002 4 жыл бұрын

Absolutely brilliant! Straight to the point, precise and simplified. Thank you!

@santiagom7576 6 жыл бұрын

Very well explained and detailed information that makes sense, and saves money. Thank you.

@scrappydogfinance8434 6 жыл бұрын

Very well narrated and quick to the point. Great camera angles and quality. Also very creative solutions for troubleshooting. I like the tips for cars that need to enter sleep mode. Tricking the computers by closing door and hood switches and using the remote to lock the car.

@schoepfdrive 4 жыл бұрын

You're a very good teacher. Very clear explanations and graphics. One of the best videos I've seen. Thank you.

@markolsen7438 5 жыл бұрын

As a general rule when you use the term "short" you will generally see smoke or find burnt wires. If your radio is still drawing power it is likely you have a switch that is malfunctioning. A short means negative and positive have touched each other

@JCortez98 Жыл бұрын

Always wondered about why people loosely say this.

@wdooley62 Жыл бұрын

Because they have no idea what they are saying This is properly described as a parasitic draw test

@ryanhamm2958 Жыл бұрын

I'm a automotive tech. And more specifically an electrical diagnostic tech, smoke and burned wires are not common symptoms of a short. In fact, I've only seen that happen 2 times. Second, many components can short internally, and cause a parasitic draw. (A radio for example or modules typically) the poster of the video should have mentioned this. The title is misleading. A short doesn't nessicarily mean ground and positive have touched. There's a few other types of electrical shorts. Stop spreading misinformation.

@ParabellumX Жыл бұрын

Great video, bro! I found one problem though... You have a hole in the thumb if your left glove. 😆

@dexietyy7922 Жыл бұрын

@@ryanhamm2958 any idea why my Ford Fiesta has a circuit motor pump failure? Keeps blowing 30 amp fuse something is shorting out somewhere but I can not find where 😌

@geraldenriquez7381 5 жыл бұрын

I learned a lot! And Thanks for using a cheap multimeter, one that's similar to what a real amateur would most probably own, You're a teacher ! !! Thanks

@deanmillonig137 4 жыл бұрын

This is a very thorough yet clear explanation of the basics. The what, how and why are easily understood.

@gpcivil8807 2 жыл бұрын

Thank you for getting to the point without a lot of self serving chatter, and thanks even more for not having any loud annoying music.

@badthoughts7238 5 жыл бұрын

Great video! Very clearly communicated. Thanks!

@sylvesterharris5282 6 жыл бұрын

By far the best and most detailed video on this subject 💯

@MapuiaChhakchhuak 3 жыл бұрын

Absolutely!

@lesslyassani805 Жыл бұрын

Thanks so much for your simple step by step clear explanation about how to find a circuit fault on a car ,I even fixed my neighbours BMW following your video.

@whoofoto 2 жыл бұрын

Loved the content, presentation, and lessons learned. I ran the video at 75% speed making it easier to follow especially as there's a lot of great information shared. Thanks again.

@LovemeAquarius 5 жыл бұрын

Very informative video ! Thank you very much and you just got a new subscriber today.

@OldJoe212 6 жыл бұрын

I've done this very same task. Very well explained.

@DSpeir-pi6tm 4 жыл бұрын

You're a smart man . Best problem solving video I've seen . Thank you :)

@apackwestbound5946 3 жыл бұрын

Extremely IMPRESSIVE: clear, concise, accurate - what a GREAT video! I subscribed-thank you!

@Rudimentarypenis 4 жыл бұрын

Dude, 10/10 video. Thank you!

@truthseeker3910 5 жыл бұрын

This is one of the best video I ever saw on electrical problems on cars great video

@matthewbaxter7502 3 жыл бұрын

Your videos are great very informative & very easy to follow. Which is great for us DIY mechanics.This has gave me more confidence with my new multimeter. Many thanks for taking the time to post this. 😊👍👍👌

@janicesmyth2183 6 жыл бұрын

You've made it so a complete novice like me would understand! thank you!

@afishyfella 5 жыл бұрын

Man I wish I had seen this video 15 years ago. I might not have sold my car. Outstanding video!

@jhingur7169 5 жыл бұрын

Do you mean to say that you sold your car because of a bad radio? LOL

@diyetc4295 4 жыл бұрын

Junky DIY guy u are just Too good at what your doing. the first time i landed on your tube, it was about car suspension. This is just nailing it. your a exceptional at what your doing, and a good teacher at large. its a hooray from me!

@indikaprabash8084 6 жыл бұрын

Great great,Thank you very much. Cheers from Denmark 🇩🇰

@leticiahoskins3296 5 жыл бұрын

Great video! My husband and I have been trying to find a way to test his transmission wiring harness bc we believe there is a short and this video really helps since we know practically nothing about electrical components. This video is very simple but also very good at explaining how electrical current works on a car. Thank you for posting this!

@MrShortStuff 4 жыл бұрын

Did you find your transmission wire issue?

@alabastardmasterson 4 жыл бұрын

@@MrShortStuff no they did not

@betareybill9400 4 жыл бұрын

And now they're divorced thanks to a short...THANKS A LOT ELECTRICITY!!! 😲😲

@dwaynes5983 6 ай бұрын

Could be a shorted sensor/ solenoid inside transmission. I come across this few times at work on machines. Measure resistance at the wires going to part.

@guanedits6349 19 күн бұрын

@@dwaynes5983 i tested mine and it starts off ar 0.20 then a second later climbs down to 0.01. At first it stayed between 0.25 then i removed pcm connection and tried it....read 0.01. Reconnected pcm and it reads the same thing....what could be the issue??

@YamarajaDasaAlcyone 6 жыл бұрын

Excellent video! thank you for sharing :-)

@mary012085 5 жыл бұрын

@DagaanGalakticos 6 жыл бұрын

Very good and easy to understand video. Thanks for adding to world peace through DIY comprehension!

@dadybig6522 6 жыл бұрын

I love the way you did this video

@MuhNeh 6 жыл бұрын

Wow this is by far the best video I have seen describing how to find a short circuit, thank you so much!

@anthonyrybczynski5420 4 жыл бұрын

I think it is a bad video because the tech should also be considering why the amplifier is putting power to the sub with key off overnight. With the key out the amp should power down and kill power to the sub as the mosfets shut off. The radio output to turn on amplifier should also be tested to see if it is shutting off or if the amp is bad. Maybe the short at the sub burned a transistor in the amp and now the amp will not power down properly. More testing required for guaranteed workmanship.

@Change-Maker 4 жыл бұрын

@@anthonyrybczynski5420 thank you Anthony! Super new to this and your comment makes complete sense. I have now learnt the basics from the video and a little more from you :)

@anthonyrybczynski5420 4 жыл бұрын

@@Change-Maker look for videos using a bell telephone tool to find the short. You pull the fuse and induce a signal into the circuit with a short. Then there is a second tool that makes a tone, you run it along the harness until the tone stops, then open the harness. You can also buy a similar tool made by power probe. It comes in the power probe master kit #5.0. From what i hear the bell tool works the same just people find the bell tool cheaper.

@WJHandyDad 6 жыл бұрын

A very good, thorough, and easy to understand video

@fengmarvel3729 5 жыл бұрын

WJ Handy Dad 7 8 9 7 Kyi I'm jowl by Tijuana on b all so a c o

@BrodieB762 3 жыл бұрын

OMG!! Best video ever!!!! OMG! Why hasn’t this channel reached 9 million yet!!

@Ltholst7 3 жыл бұрын

Dude! I never even thought about doing that. Thank you so much.🙏🏾

@volvogt21 5 жыл бұрын

Impressive video. Thanks.

@ColinDies 3 жыл бұрын

I've been doing DIY work on cars for over 20 years and only now had a need for this. Your explanation was excellent. Good work.

@user-tl2fk1rd6t 5 ай бұрын

Twenty years.... And barely "need" lol

@techsupportnubrite4264 3 жыл бұрын

This is WONDERFUL. Thank you for doing this. Very helpful.

@kj9219 4 жыл бұрын

Well done. Concise and clear. I had no idea you can check blade fuses that way.

@veeduboasis5642 6 жыл бұрын

ahhh the black glove of knowledge 😁

@Airman.. 6 жыл бұрын

Well put keep em coming

@Warmsunset26 3 жыл бұрын

Simple, informative. Thank you.

@audrybella6405 8 ай бұрын

Nice job with the video and the explanations. From the looks of the shorted / melted wires and melted plastic this car owner was very fortunate to have not experienced a fire.

@jammerp226 6 жыл бұрын

You should have millions of subscribers. Great information, great voice, great filming. Excellent job to be sure!

@isleofmann1088 5 жыл бұрын

It's called parasitic draining. Short circuit will cut the fuse..

@alabastardmasterson 4 жыл бұрын

Atleast he didn't call it a packet

@mattsilcott1447 4 жыл бұрын

Parasitic draw is a short circuit most fuses are at least 10 amp fuse blows from overload and many other things. Just my opinion

@mattsilcott1447 4 жыл бұрын

Although I rarely see a fused circuit that will get this hot as the fuse should burn b4 wires in my experience

@nick.4. 4 жыл бұрын

@Roberto Mundo tries to correct him.... fucks up lol

@joew4202 3 жыл бұрын

Short won’t always blow a fuse

@michaeltillman3146 3 жыл бұрын

Probably the most informative diy video I've ever watched. Great job

@captainamerica6521 3 жыл бұрын

you must not watch much then! lmao this is wrong

@1970sureconnection 5 жыл бұрын

This guy is great. He knows his stuff!! I like this guy . !!!

@costadhimbo1364 3 жыл бұрын

even a lecturer cant explain this well, this is good

@fieldsofomagh 6 жыл бұрын

Handy know how on finding shorts.

@JunkyDIYguy 6 жыл бұрын

Some German cars require reprogramming the ECU if you disconnect the battery. So sometimes this is the only way you can find a short unless you wanna spend big$$$ reprogramming the ecu.

@TheBigDaddy313 6 жыл бұрын

Tom OConnor ..l.,

@davidlopez991 7 ай бұрын

Thanks for the explanation, quick and to the point where so many videos are not

@middlecovemotors2474 4 жыл бұрын

Your diagrams are perfectly awesome.

@theredbaron057 4 жыл бұрын

this was very helpful, thank you! Also, you forget about your wiring issue - you're wheel is on the wrong side!

@seansinger4414 4 жыл бұрын

theredbaron057 that’s funny man I get the humor

@CHIBA280CRV 6 жыл бұрын

Fantastic thanks

@JimLewis2 6 жыл бұрын

Agree. Very good, easy-to-understand video on how to use a multimeter to find a short.

@marioabello7137 2 жыл бұрын

Very clear and simple narration. TNXS

@sachinnair1613 6 жыл бұрын

Great video, it was very descriptive. I had a small question, I have a fuse that keeps blowing (its the tail fuse, controls the tail lights, parking lights, and the license plate lights). I found the problem to be the parking lights, since the fuses stopped blowing when they were disconnected. What's the next step?

@JunkyDIYguy 6 жыл бұрын

the only reason why a fuse would blow is flowing too much current through the fuse. Either someone installed brighter light bulbs that require more current than regular light bulbs or splicing the tail light wires to draw power from it to power up something else like extra brake lights or reverse lights. Assuming it's not the case in your car or you don't have a faulty body control module, i highly recommend to check the wiring harness for any shorts. Looks like You have a short to ground. possibly anywhere between the fuse and the tail lights on the live wire that goes to the tail lights has a damaged insulation, that rubs against the chassis.

@sachinnair1613 6 жыл бұрын

I did install aftermarket headlights that have CCFL halos, but on all the reviews on Amazon, they said that they work fine and don't require additional power. How would one go about checking the wire harnesses? I have access to a wiring diagram, and I located the grounds for the tail lights, parking lights, and the license plate lights.

@JunkyDIYguy 6 жыл бұрын

you said you have found the problem to be parking lights. there're 4 parking lights. 2 in the front, 2 in the rear. Narrow it down to to see which one of them causes the fuse to blow. Rather than blowing a bunch of fuses as you test, you can buy a re settable fuse circuit breaker that goes in to where the normal fuse would go in. so you can manually reset the fuse every time it blows out. Once you narrow it down to the defective parking light. Then start checking the live wire that comes to that light. check the parking light switch too. Sometimes they short out inside.

@sachinnair1613 6 жыл бұрын

Junky DIY guy thanks. Actually, a set of 25 fuses only cost me $5 so it's really not worth it. Also, I found out that the problem is the passenger side parking light. If I unplug that, the fuse doesn't blow. Should the next step be to try to trace the wire from the lights to the fuse, if that's even possible?

@JunkyDIYguy 6 жыл бұрын

Sachin Nair yes it is

@timmarrier 5 жыл бұрын

Maybe I missed something, but how would shorted subwoofer speaker wires cause a battery drain? Or any speaker wires for that matter? I don't think they can, they're post-amp that's switched off when the vehicle's off.

@ericscaillet2232 4 жыл бұрын

Not if the amp got damaged.

@looseshackles7462 6 жыл бұрын

Great video! Very informative and well presented. Thank you!

@ernestoalicea4594 5 жыл бұрын

Awsome explanation...thank you for the post .... plain and simple

@SpaghettiEnterprises 5 жыл бұрын

7:41 Sweet dolly zoom lol

@mitchjohnson4714 3 жыл бұрын

That remote just realized that the radio is planning on assassinating the president.

@naquoashuey2794 6 жыл бұрын

The second way is the correct way to diagnose a draw on modern cars. Pulling fuses is not recommended anymore, although it is still my preferred method.

@ronabbott2053 Жыл бұрын

One of the best videos productions I've seen, keep up the good work. I really like the digital diagrams. Good on ya!

@deaconhairco5015 4 жыл бұрын

The best tutorial on KZfaq

@kirkbrown2147 6 жыл бұрын

Your're looking for a parasidic draw not a short.Parasidic put a drain on your battery. Shorts usually blow fuses. You have two kinds of shorts for example power to power shorts which doesnt normally blow your fuse; ifyour press your horn your indicator light comes on. Shot to ground ground most definately blow your fuse since there is no resistance.

@TheOzthewiz 5 жыл бұрын

The term is PARASITIC

@cecilg.relation2537 5 жыл бұрын

Exactly.

@walterk1221 5 жыл бұрын

To be perfectly accurate, parasitic draw can be and often is what is called a high resistance short.

@easylivingsherpa 5 жыл бұрын

@@walterk1221 Who gives a fuck it's all semantics.

@enlightenednews5265 5 жыл бұрын

@@easylivingsherpa Enough of the hate speech. 😁

@andreasanai3542 6 жыл бұрын

You have find a parasitic draw, a short is something that blow a fuse

@deanraddick9041 Жыл бұрын

This was very well put together. Very nice instructions!!! Thank you

@patrick9761 4 жыл бұрын

best explainer online! thanx man

@niacal4nia 6 жыл бұрын

Disconnecting the negative battery on some newer cars such as VWs and Jaguars could cause a loss of throttle settings and a dealer scan tool is the only way to get the car started.

@JoelAutomotiveInaction 6 жыл бұрын

niacal4nia you are righ vw and audi every time you erase codes or disconect the batery you have to do throttle body relearn

@Av987 6 жыл бұрын

One more reason to never buy an Audi or VW

@jonasfunride 6 жыл бұрын

Av987 its not only audi. I have Audi and Nissan, its THE same with Nissan.

@hoosenkhan8553 6 жыл бұрын

This is not true one does not need to re-align or do basic settings in a new Audi or VW when the battery is disconnected. The ECU automatically does this all you need to do is leave the ignition turned on for a few seconds after the battery is Re-connected..

@KornerCommand 5 жыл бұрын

Lol no

@jimbo5728 7 ай бұрын

This is not a SHORT. This is a parasitic loss. Completely different things. Video title is misleading.

@derekmoult238 2 ай бұрын

Wires burnt together is a short. Don't know where you found parasites

@swiftaudi Ай бұрын

Thanks for saving me time.

@abescobedo8921 Ай бұрын

4:30

@Perceptionisreal 24 күн бұрын

While I’m not disagreeing with you don’t short circuits sometimes cause parasitic draw? 🤔

@johnkimmel3094 14 күн бұрын

Thanks, saved much time.

@randempedestrian 4 жыл бұрын

Thank you! Lots of helpful information and a great video overall. Subscribed!

@azizaviation 3 жыл бұрын

excellent video, simple easy and straight forward. well done.

@juergenscholl2843 6 жыл бұрын

The fuses actually do NOT protect the components, their functions are to protect the installation and avoid electrical fires. (1.13) 1 - If a component draws too much current it already is bad and the only thing left to protect is the wiring... 2 - If there's a short to ground causing higher current flow than a component can stand, this short will take place before the component and the high current doesn't even flow through it. Think about it😏

@maxwebster7572 6 жыл бұрын

A short to ground can occur after the component between 1 or more loads and may not blow a fuse.

@williammorace28 6 жыл бұрын

Smart person who wrote this your right!

@maxwebster7572 6 жыл бұрын

Correct in a basic ckt unless the short occurs after the load, spikes and takes out an IC or other sensitive components or cause shunting.

@juergenscholl2843 6 жыл бұрын

max webster If the short takes place after the component current flow will be limited by the component itself to the amount the circuit was designed for.

@maxwebster7572 6 жыл бұрын

Not necessarily. It will be limited by the fuse which is there to protect the wire not the ckt.

@bakes4715 6 жыл бұрын

Speaker cable had nothing to do with the voltage drainage period

@TheOzthewiz 5 жыл бұрын

Yeah, probably blew a transistor in the RADIO because of shorted output

@SuperGreyfox99 5 жыл бұрын

Typically a larger wire is required to drive your subs. I would replace the wires with larger. Thanks for the video.. well done

@Morganthebandgeek 6 жыл бұрын

I feel so educated, thank you Junky!!!

@romuligor 4 жыл бұрын

Thank's! Outstanding video and explanation! Congrats!

@jharrison6557 5 жыл бұрын

Why is the title of this video how to find a short? You're not finding a short, you're finding a parasitic draw

@trevorfrancismeusx9120 5 жыл бұрын

Do shorts cause parasitic draw?

@chrisjohnson4608 4 жыл бұрын

No, a short is an unintended path to earth. If this happens it will create an over current situation and blow the fuse. The fault with the sub wires in the video would not cause this fault with these symptoms. It would put an amplifier into protect mode, not drain the battery.

@juanfgonzalez2039 6 жыл бұрын

That works on old cars new cars have body control module this not going to work home boy

@milfs310 5 жыл бұрын

OkY so How about you explain why it won't work or a how to on vehicle's with bcm?

@illhaveanother4365 5 жыл бұрын

Lmao wtf is a home boy, G?

@davidogan Ай бұрын

Unbelievable! What a great solution. Thanks.

@user-jw2qu5cj2k 2 жыл бұрын

this the test for professional people ,,, thanks a lot man

@immanuelshemuketa7181 4 жыл бұрын

wow now I know how to find a short quickly. thanks a lot

@BonJunCuevas 3 жыл бұрын

Easy to understand and clear illustrations.

@condor5635 6 жыл бұрын

Great job. Very informative and well done. Thanks

@JunkyDIYguy 6 жыл бұрын

thanks

@Abegley1998 Жыл бұрын

you are by the best instructor ever i have seen many videos that are short commings in information thank you for taking the time and going over the procedure and explaining in detail what you are doing and what is going on i definatly will be share your videos.