that looks so sick the way the tile and profile work together to give the tile wall additional depth and bulk. terrific look

Thanks for making all of your videos. I’ve been out of the tile game for 14 years and am rusty as the tin man when Dorothy found him, your videos have brought me up to speed on what has changed in prep to do my kitchen. Mahalo

I am a tile setter with 20 years of experince. You done a great job! Love to see your videos.

DIYer here, just got FINEC and was going to practice this weekend making the cuts. Perfect timing, thanks Isaac!

Putting a mitre on that tile was the most impressive thing I've ever witnessed!

Isaac you're the man and thank you for all the info. I did my first small bathroom tile floor and had all the confidence in the world from watching hrs, literally hrs of your video's.!!! Thanks again and keep this content coming.

Thank you so much for sharing your tutorials. I can't express how helpful and informative your videos are. I learn more and more with every one. I've been doing home improvements for over 35 years. An old dog can always learn new tricks. Anyone who says they know it all and has the mindset that they can't learn anything is already done.....hang up your trowels, there's always room for improvement. I personally strive for perfection on every job. You Issac are a top notch class act no pun intended. I'll keep learning and thanks man for your time and efforts.

5 years into trades as a carpenter here, your company by far does the nicest stuff I’ve seen. Down here on the Monterey bay there are some good tile guys too but man that is some clean work. Thanks for all your help 🤙🏼

First off, I've never commented on a TileCoach posting but I thought I would take the time to thank you, Isaac for you approach to instructional videos. There are thousands of tiling channels out there and they all have their merits and style and I am a strong believer that no one is perfect as Isaac will point out. Additionally, there are many ways to tile correctly and professionally so people need to realize that and I see so many negative comments on just any tiling video out there. I considering "learning and adopting" techniques to your style is lost art as many expect some perfect video that shows them exactly how to do it in every situation and life isn't like that as we all know. Every house, wall and floor is "uniquely" different. The fundamentals of taking the extra time to plumb walls and level the base just cannot be understated and in my opinion is one of the most important steps and tips that I think all home owners (and probably some professionals) should adopt. We moved into a new house recently and for the first time, I took these tips seriously and I cannot believe how easier it made pre-cutting and tiling the shower. If there is anything that I took away from all the tips, it is this one. Anyhow, thank you Isaac. And now to the topic of this video. I am a homeowner and have done several bathrooms over the years, all my own or friends so I am no expert nor close to it. This happened to the first video that I stumbled upon on mitered corner and I've watch a few other videos. I have never been a fan of edging, especially metal edgings as I like clean, simple and refined edges and corners. Additionally, I absolutely hate metal edgings in shower niches. I will admit, I was terrified and hesitant at trying this method (and in honesty) plan B was to use metal edging but I never needed plan B. I don't have money to spend professional wet saws...I have a budget wet saw and some hand tools and want to let others know that it can be done with simple tools BUT with extra care. And I mean really slow down, take your time and it can work. For reference, I'm a somewhat handy person, I am more of wood worker but handy enough to tackle other types of projects. My tip for those that are like me: 1. I use my budget wet say to miter but always careful to be conservative and leave a more pronounced edge. 2. I then slowly and carefully finish with the hand grinder using fine grit diamond wheel. To my surprise, the grinder worked more effectively than I had anticipated. Using this method, I mitered the curb and niche but did not do the vertical edges as I was a bit uncomfortable with mitering such a thin piece for the vertical edges (this from experience in wood working). I tried a few pieces and decided against that. I was also able to find a Schluter edge that blended in so nicely with the tile we used that from 5 feet out, you couldn't tell I was using a metal edge as it matched color and texture. There was definitely some trial and error but I always used left over pieces to test cut and refined my method to my tools and capability. It's always deceiving watching KZfaq videos and not just thing one how simple and error free it is and I found that doing the mitered easily tripled the amount of time to measure and cut these pieces so fact that in. Wow, that was a long post. I guess sipping coffee with some jazz in the background is inspirational. Hope that helps those thinking about doing this and thank you again Isaac for your work, I appreciate you and your work.

Isaac, it seems like everytime I have a tile question, you have a video with the answer. Really appreciate your videos!

You are my new hero. About to remodel bathroom and THIS is it!!! Appreciate your know how and skills!

Thanks for explaining the back butter issue, I hear it all the time on these videos that you must back butter. I have been doing showers and floors for years on my own projects without back butter and have never lost a tile ever!

That Finec is an awesome profile. Great beveling/polishing technique as well.

Wow, congratulations from NY, excellent job !!! You are the man of tile work.

OMG you were in Denver?!? I'm just 1 city over! That's awesome that you're doing jobs here too so that you can point out those differences in Installations, like not being able to install niches in exterior walls. Great job as always & thanks for all the teachings...my wife & I love having you as our tile coach for all our home projects!🤗 God bless!

Run the thin set lines horizontally that way you go up and down with the tile to collapse the lines. This way you are not constantly knocking the tile edge trim out of place and having to push in back into place. Great work! Like you I take pride in my work, and I walk away from every job saying "dang that is a beautiful job!" It is rewarding work.

Using a bullnose tile as a guide, I bullnosed the exposed ends of the tile with a diamond cut-off wheel and diamond polishers, then painted the new bullnoses with custom mixed paint that matched the tile color. It was a little extra work but they turned out great and look like factory bullnoses.

Always some kind of information in your video's. Thanks Isaac and crew.!

Thank you for time span call out of 5 days. Brings reality to HGTV false expectations

You sir, are an artist. Thank you for the tutorial. I can't wait to try this.

Gotta say man, you seem like a solid and humble type of dude. Its good to see, cause the trades are full of arrogant people.

I really like your videos...you do it in a very informative way and you can be heard well also.

CLEAN & Strong!! Good stuff Tile Coach and Crew

Your videos are awesome! Very new to tile projects, and appreciate all your insight.

Help keep our channel self funded. Consider purchasing an item from our new store. Thank you. www.tilecoach.com/shop

That looks awesome - I have done similar and the time taken is well rewarded with a return on the edge of the wall tiles that hugs the wall - excellent !!

As an old craftsman it is nice to see a young one.

man that miter edge looks so clean

insane work, you’re a master of your craft

Amazing work! Thanks for all your help! God bless!

The edge on the plumbing wall is outstanding🍻

I just started using those trims on my outside corners it adds some work but is worth the time

Beatiful!!! Good job from Tenerife🇮🇨 Spain🇪🇸

Nice work. I'm still learning everyday

Nice!!! Mad skillz!! I'm a contractor in StLouis, doing a shower right now (that's about to have mitered edges ;)

everyone is said to be an expert but learns every day! It is not good to criticize but to repair!

How weird is it, that get so excited when notification come thru with a new vid from Tilecoach, imo, NOT WEIRD AT ALL😁 1:20 hands as steady as a surgeons, BOOM👍🏻 Really liked that miter profile. Pretty cool, how did that and finished it up, nice! Have a house remodel project starting soon (2500 sq ft) and also redoing the 3 bathrooms it has, and adding a “small” kitchen in a mother in law suite (type room). Will send some pics if able to. See ya on the next vid✌🏼

That looks amazing man! It looks like all the tile its 3/4 thick everywhere from the outside

You did an excellent job!

I always learn something from your vids, man. Thanks for taking the time & effort to produce them. Cheers from Canada 🇨🇦

That's quality work, right there!

Awesome detail as a noob just trying to learn how to tile over sterling shower combo. thanks.

Now you're just showin off. Great work.

You guys are god’s of tiling!!

I’m usually with Isaac about everything. He’s as knowledgeable as it gets. Personally, I avoid sliver cuts at all costs and putting in those small pieces would drive me nuts.

Tiling is complicated, thanks for the TCA handbook tip bro!

You've taught me a lot of things ... thak you🙏

That floor is beautiful. In the old days before schluter we'd miter the tile like that for OC's but no strip so you had to be very careful to not have any sharp edges

Oh nice. I live in Denver. I have been learning a lot from you.

Amazing attention to detail, you would throat punch who ever tiled my master shower. First month in the house curb failed, no water proofing at all just a drop in liner, no hydro barrier or even red guard.

16:00 I think the tiling cuts, layout & grout lines feeding into the drain on the shower floor are way cooler than the mitered edges!

I'm pretty good , as well. Our knowledge is all based trial and error. Thanks for teaching me some new techniques

Received my shirt today. Thanks

Looks nice. Using te Schluter integrated, low profile, sleek metal shelves is worth considering, too.

I like you videos, how you explain and the quality of your work. I really would appreciate more close up camera views though.

Have you ever tried the adhesive and grout mixture ? Today i went to look at a job I did 30+ years ago and it looked pristine. Bright white with zero stains. They now want a seat built into it. Around that time I did a lot of tile work (showers / baths in custom homes) and used every system, brand etc. that came out or existed. It's now come around that I'm seeing those houses come up for remodels, repairs etc. The fake marble shower pans have held up the best. The plastic ones have all been scratched and stained but I haven't seen any that have failed anywhere but the drain. Of the tile floors in the showers the best ones are the ones where I poured a mixture of vinyl patch mix and type-s mortar and formed my own pan. The grouts have all failed at one place or another and to some degree or another except for the ones where I used the grout and adhesive mixture.

such a nice detail. kudos.

Some video of that final Finec profile and those thin rips w/ mitre would hold my attention!

Looks amazing . Love it .

perfect. and u used the stabila. perfect.

Great job👍

Isaac, I think your little friend there needs to be a tile setter. I give an example: In 1960 PA Dept of Transportation built the Fort Pitt Tunnels and the walls are lined with white tiles. A few years ago a truck ran into one of the walls of the inbound tunnel and ripped some of the tiles off. For weeks, motorists had to see a dark passage in the tunnel, the reason being PennDOT had a hard time finding a contractor and workers "experienced in the trade". And this is for a big project, no wonder we can't get anyone for home jobs. It did get done and the tunnel is once again bright.

Isaac, you did everything right in my book. Those return mitred edges is what a master does that has a high degree attention to detail. A lot of tilers would have put a Jolly on there. I work on high end homes and I never see them use those and for good reason. Nice work.

Very nice tiles design

very informative good vids down the line!

Hi mate learnt loads from your channel and thank you for that. I've just tiled my bathroom but I'm struggling with one bit. I build a storage box behind the bath tub but need to cut tile trim for it 3 way external edges. Tried looking for a video but can't find what I need. Could you do a video please? Would appreciate it loads

Hey Tile Coach, awesome job. I am following the exact pattern on my bathroom and have a question, the tiles butting the back wall, did you use the leftover tiles for the back wall (20" back wall, 4" leftover on side) or did you recalculate the layout for the side walls? Thank you!

Perfect. Next level.

I wasn't go to comment until you mention the hand book TCNA. The flat toweling was technically not done properly. First you must Key the thinset into the substrate. You should hear the metal of the trowel making contact with your substrate. Then apply what you need to make the notches. Your work and teaching is still top notch keep up all the good things you do!

nice work!!

Super high end look!

Great job..im a finish carpenter for 40 yrs but have run quite a bit of tile ..i think i wouldve installed a bullnosed pencil up that side that stood proud of the tile about an 1/8th to 1/4"..looks great with alot less labor, but the miter def is a clean look as well..great job👍

I’ve been using the q-shaped schluter strips. They are really nice, the tile slides into them and hides your cut edge(if you have one)

Awesome job

Hi, first and foremost I think your doing a great job, your very knowledgeable and professional. So there are all kinds of videos on the fundamentals of tile installation which I do myself for a living. I feel alot of the diy and weekend home warriors find your expertise and skills very helpful. Although I'm yet to see a video on how to resize a tile that is a 16th or a 32nd cut to big. You know that when you try to take off a blade, that unless you put a fence or a sacrificial tile the tile your trying to recut will slide or squim away. So I thought that would be a great video for you in the future. Keep up the good work.

So Great! Wish you could do a "working vacation" in Rochester NY and we'd hire you to do our new shower in our extension!

Welp, this tip involving the mitered edges came just in time for I'm about to do the outer edging of my field tile into a Schluter jolly edging and was going to "slip" it in (which I think will be difficult and sloppy) from behind the tiles (a method that the YT super-starr uses😛)but now I'll miter my tile edges to fit into the edging. Thanks for the idea.

Artist at work. 💥👌💥

How do you decide whether to back butter or collapse the ridges? Thanks for going in depth for this stuff

great video. thank you

Cheers for this vid😊

Nice job.

Nice work, I do the same cut in wood molding however I tile it's just more time consuming

Wow that' s looks Fantastic....I stumbled onto your videos and you do some great work. We are using very similar tile for our shower. We realized today that putting on the wall stacked with nice straight seams is going to look better for our small shower than trying to cut it up like a subway tile. Curious what color grout did you go with on this shower... we are spinning our heads trying to pick 1 grout color for Bathroom floor, and shower. You got another subscriber.

Good video bro

Beautiful work i dont think i could have done it better myself, when i do my edges i just set my botttom two rows and than slide the profile in, i find the first two rows are enough to lock it in and get it plumb, i dont add thinset all the way up like you did, ill just go ahead and set each row like normal after the first two, thats just my method after trying out a few different ways and i think its the easiest

Guy makes it look so easy. It's not that easy. But it can be with lots of practice.

so clean

Without a spacer system. Very nice

I have a question the floor needs to do it first and the walls later or people can do the floor last? What's the best way and why? Thanks and also nice and clean job

Hi Isaac. I am planning on using the Finec trim in a shower niche with ceramic tile. I’m a little nervous but trying to focus on the end result (look & dimensions). I plan a 1/16” gap for grout between the miter & the Finec. It seems your Finec butts right up to the miter (12:38). Have you ever used a spacer? Thanks for the videos! You are the man!

LOVE the channel I am new, and doing all my research for my DIY project, my only question I have is that how did you CUT the small tile pieces to finish the corner, I understand the 12/24 tile is miter cut, with a schulter finch trim.

Can you do a close up of the finished edge?

I'm planning to use the schluter jolly. On a wall with the outside corner. The painted wall is a bit wavy. So if I put the jolly in plum parts of the wall will show. Should I bend the jolly to make it slightly not plum to make it look nice or should I keep it plumb and just paint to try to hide the areas of waviness that show up with the jolly there

Why no wedge leveling system being used and no back buttering of tile which I usually see in your other videos. Great job, looks really good.

Interesting about the niches. I'm in the northeast where it gets freezing and have a niche in our tiled shower on an outside wall in a our 100+ year old house I redid. Never noticed any sort of issue.

Was there a need to mitre the edge backing up to the shluter trim? Would a factory edge not be sufficient?

I went to a course by the the guy who writr the book on tile inspection and one extra thing he wanted to see more was perpendicular mudding, like vertical on the wall, like you did, them horizontal on the tile. Especially for exterior use.

Is there a specific brand blade and sanding disk you prefer ? Btw...nice work

Nice job that’s difficult to do just finished a job with that exact detail it’s no joke.