Hey mate, really appreciate you producing this video. Very helpful
@HappyGoTravel Жыл бұрын
Thanks mate
@JarradDRS3 жыл бұрын
Thanks for posting this mate. I’m not driving a Fortuner, but you’ve made me realise the positives aren’t enough for me to make the jump to a 285/70R17. Definitely enjoyed watching your Lithgow videos. Keep up the good work!
@HappyGoTravel3 жыл бұрын
Thanks mate ✌️. I don’t think I’d do it again considering how much work for little gain
@sajanmajhi68299 ай бұрын
Hey mate, Love your videos, great information here. Quick question, I have a 2016 GX. I’m recently getting into 4x4 and got the fortuner recently so still new to this. Ive got a 2 inch EFS suspension lift done. I am thinking of upgrading my tyre size. What do you think is the best option without causing scraping etc. Will 32s sit fine or do I need to do some work to get it to fit, such as 1 inch body lift or adjustable upper control arms. Or is there anything else you suggest? Also, with a 2inch suspension lift, am I able to install 1 inch body lift with no issues or is that illegal in NSW. Thanks mate, would love a reply.
@unharmonix Жыл бұрын
Hi mate, cheers for the informative videos! I just got Wildpeaks in 275/70r17 on D wheels like yours but with -19 offset. They scrub hard on the front, both the front and back of the tyre, so they're sitting in the tyre shop until I resolve the clearance issue. I'm chucking a 2" lift on it shortly, and will do some tapping with a hammer. I still have the stock front bumper too. Wish me luck!
@HappyGoTravel Жыл бұрын
Hey mate-19 is way too much offset for these things. +10 even +20 is ideal for larger diameter tyres. There’s not a lot of room clearance wise under them
@unharmonix Жыл бұрын
@@HappyGoTravel I'm actually only guessing they're -19. They might be a 0, that's the only other low offset size they come in. I didn't buy the rims, it came with them on so I'm poking a guess at their offset based on the available offsets for these wheels... But they're mad dished. If I still run into issues then I guess I'll have to drop to a more positive offset. Cheers for the advice man!
@HappyGoTravel Жыл бұрын
@@unharmonix all the details are on the inside of the wheel ✌️ I ran 0, you can make it work it’s just a bit of manipulation of guards
@unharmonix Жыл бұрын
@@HappyGoTravel thanks bro I will update on how it goes!
@unharmonix Жыл бұрын
@@HappyGoTravel Yo! I ended up buying 0 offset D wheels, and used a heat gun to melt and bend the plastic of the inner guards to create clearance. Tyre shop did an alignment for me to sit the wheels a touch further forward, and now I have mint clearance. Just the tiniest occasional "chirp" of rub from the tyre at absolute full lock, otherwise she's mint! Truck looks rad on the 32s
@dillydoopsta60904 жыл бұрын
Thanks mate good video👍
@HappyGoTravel4 жыл бұрын
Dilly Doopsta thanks mate
@4xfortuner8124 жыл бұрын
Im planning on doing 285/70/17 KO2s mate. Since its undersize you think i can get away with it with minimal scrub? Im running a 17x9 wheel with a -10 offset atm on 265/65/17 hybrid ATs Also was it worth fitting 33s? Or are the run of the mill 265/70/17s still better? Thanks mate great rig! Cheers!
@RR-cg2rq4 жыл бұрын
Just go with 265/70r17 with minimal lift. Tough Dog offers coil springs with 40mm of lift. If you want something lower, OME has springs with 30mm of lift. No point in running 285/70r17 because that will just mess up your speedometer hence, slower acceleration and increase in fuel consumption. You can also go with King Springs. Their springs will also give you 40mm of lift and they are progressive unlike the Tough Dog. At this rate, there would also be less spendings. You won't have to change your UCA and your panhard rod. You'll just need transmission spacers if you were to go with a 40mm lift.
@sefisredtv89912 жыл бұрын
@@RR-cg2rq hey. Whats a transmission spacer and why do i need it. Im going to go from 265 65 17 to 265 70 17 in a bout a month
@RR-cg2rq2 жыл бұрын
@@sefisredtv8991 to straighten the universal joints of the propeller and to remove drive train vibration
@RR-cg2rq2 жыл бұрын
@@sefisredtv8991 make sure not to go with those cheap lift kits from Thailand
@sefisredtv89912 жыл бұрын
@@RR-cg2rq thanks :) i wont forget my transmission spacer
@oot19604 жыл бұрын
Thank you Caleb, great info on all the mods. Myself and a friend wanted to fit 33's on our Fortuner's as well. Considering our options now. :( What are your thoughts on 17 x 8 with a +14 or +20 offset? Thanks
@HappyGoTravel4 жыл бұрын
Richard Milton I would use +14 I would think +20 will work as well though. Another option to consider is 275/70r17 or 275/65/18 you can get away without cutting with the right offset
@oot19604 жыл бұрын
@@HappyGoTravel yeah we both have 275/65 R18 at the moment and wanted 33's if we could!
@jarrodc80912 жыл бұрын
Hi Caleb I’m looking at getting 275/65r18, do they rub?
@evanwilliams43512 жыл бұрын
Great vid mate, what rims are they, looks 👌
@HappyGoTravel2 жыл бұрын
They are just a dynamic D hole steel wheel
@evanwilliams43512 жыл бұрын
@@HappyGoTravel Nice and cheap, perfect!!! thx
@geethadany2952 жыл бұрын
Mate have you done a video of your roof rack ,can you please share the link
@saltysouthern54773 жыл бұрын
What’s the biggest size tyre you could fit without extensive modifications? such as body copping etc. Obviously body lift is usually required but other then that. Appreciate any feedback.. cheers.
@HappyGoTravel3 жыл бұрын
BobbybithUNbss Boss being realistic a 265/70r17 or a 265/65r18 they both work out around 32”
@saltysouthern54773 жыл бұрын
Happy Go Travel Easy, Thanks mate’ Keep up the great content!
@piyapatsirinupong38214 жыл бұрын
Nice one , Shock lift how many inch? I want fit 275/70/18 tyres like this
@philfishes75272 жыл бұрын
Glad Ive discovered you, excellent piece. So if I go OME 30 mm lift will I need to cut , bash and BMC ?
@philfishes75272 жыл бұрын
Sorry, with 32s !
@HappyGoTravel2 жыл бұрын
With 32’s and good wheel alignment you should only need to remove the front mud flaps. Just keep offset in mind, I’d only go +10 max. 0 is just a bit too much
@philfishes75272 жыл бұрын
@@HappyGoTravel Legend, thank you
@richardwalsh55702 жыл бұрын
I am thinking 2" outback armour lift with Fuel 8.5 wide wheels, 265/70/r17. They are plus 7 offset. How do you think that will go? Alternatively plus 12 offset roh. What do you think best? Thanks in advance
@HappyGoTravel2 жыл бұрын
That combination will be fine. at most you’ll need to remove the front mudflaps. If I was doing it again I’d body lift it first before cutting everything for the 33’s
@BenMitro4 жыл бұрын
What happens if you start getting rust on the body panels/guards...warranty won't cover it, and most Fortuners will still be under warranty I suspect. That's my main fear with cars under warranty, the dealer/manufacturer will use any excuse to get out of fulfilling their obligations and its well within their rights unless the rust is in the tailgate and you've only "adjusted" around the wheel wells. Is this "fear" overstated? Am I over reacting?
@HappyGoTravel4 жыл бұрын
I’d be surprised if Toyota warranted any rust issue at all. Modified or not. With it though If you paint everything you touch and clean your car properly often I’d doubt you’d have any rust issues. I would say you’re worried about nothing but that’s just my thoughts.
@HappyGoTravel4 жыл бұрын
Warranty wise most dealers will point the blame on modifications though, so that’s definitely something to keep in mind. In saying that I have had warranty work on things like water pump etc. yeah m sure if I had a driveline issue it would be a different story. Also I’ve had 33’s for 100,000 km without any dramas as well.
@ritik_rajput_443 жыл бұрын
Super modified 🔥 fortuner
@obildiren753 жыл бұрын
Hey mate nice info thx Wanted you to know I am putting 2 inch lift formulas on, in 2 weeks not the arm brackets would I be able to Still fit 32s on it and what do you recon about formula lift kit
@HappyGoTravel3 жыл бұрын
Omer Bildiren being a cheap kit I think for the price it’ll be a good thing. Lift doesn’t clear tyres but 32’s will fit
@RG-os4xx3 жыл бұрын
Will ATs 265/65R18 or 285/60R18 work fine with stock suspension or will they scrub?
@HappyGoTravel3 жыл бұрын
Both sizes will work you’ll just have to get wheel offset to suite
@RG-os4xx3 жыл бұрын
@@HappyGoTravel Thanks for the reply, just wondering, by wheel offset, are you referring to how forwards or back the wheel sits or the rims offset meaning how far in or out it wheel sits? As I don't want replace the 18" rims I'm using
@HappyGoTravel3 жыл бұрын
@@RG-os4xx in and out is offset
@HappyGoTravel3 жыл бұрын
If you are keeping the factory 18s the 285 won’t fit
@RG-os4xx3 жыл бұрын
@@HappyGoTravel Thank you, will stick to the 265/65R18 then.
@shaddonaghue4 жыл бұрын
Nice one buddy, I like the fortuner and its great you can fit that size on there
@HappyGoTravel4 жыл бұрын
Thanks mate
@Hazardbone4 жыл бұрын
Looks like a beast👌
@HappyGoTravel4 жыл бұрын
Thanks mate
@oot19604 жыл бұрын
How are you finding those ATs compared to the Mt's you've had before?
@HappyGoTravel4 жыл бұрын
They are growing on me, i haven't had the chance to actually test them off road thanks to covid. but i will give an update once i have
@oot19604 жыл бұрын
@@HappyGoTravel thanks, keen to know. They also come in 275/70 R17.
@oot19604 жыл бұрын
Can we get an update on the tyres please Caleb?
@4xfortuner8124 жыл бұрын
Hey mate if i take out the tow bar will the 285s fit underneath?
@HappyGoTravel4 жыл бұрын
I think it'll come close
@richardwalsh55702 жыл бұрын
What was wrong with 0 offset?
@HappyGoTravel2 жыл бұрын
You have to cut way too much. 10-15 is the go
@ShoeysAdventures4 жыл бұрын
I came to see how different it is to my 150 ;P
@ShoeysAdventures4 жыл бұрын
Bloody hell you've had to do so much more to get the 33s to fit.
@HappyGoTravel4 жыл бұрын
Yeah there’s a heap more room under he Prado’s. I have mates that just bolt them straight on Everest’s stock 🤣🤣
@christianluna17524 жыл бұрын
stock gearing?
@HappyGoTravel4 жыл бұрын
Christian Luna yeah still stock gearing. I have considered diff gears but haven’t had any issues so I haven’t yet