No video
How to fit 335s on FBODY (1993-2002 Camaro) Part 1
Рет қаралды 44,297
Күн бұрынFollow me on Instagram!
/ micaheclinton
CUT OUT OR BEAT IN THE BUMP STOPS!! This is part 1 of jus showing how I made 335s work on my 02 Camaro. I’m thinking this will work on all 4th gen year models and maybe even third gen. The spacers help a lot and prevent rubbing on the lower control arms. Ask if you have any questions! Will be makin a video on rolling fenders!
Link for part 2: • How to fit 335s on FBO...
@j-dirty5615 4 жыл бұрын
When u roll the fenders post that video whould like to see
@jamesgreen9954 3 жыл бұрын
On my 2000GT I’m running 305/45/18 nitro drags without wheel spacers and a set of adjustable rear shocks and picked the rear body up just a little so it doesn’t scrape the tire going into dips entering parking lots. I find the 305/45/18 nitro drags to provide plenty of traction up to 550 to 600hp and I’m stick shifting with the wheels slightly off the ground grabbing 2nd gear with the front still in the air. Anything wider sticks out past my rear fenders. These tires bite the asphalt or track when warmed up and move down the 1/8 or 1/4 mile and look bad ass.
@keilylmm6377 3 жыл бұрын
Damn you got steam rollers on the back of that SS. I'm going 315- 35x17 in rear of my 94 trans am. 17x11. In rear rims. 17x9.50 on front. 275- 40 17s.
@bobsacamanojr9382 3 жыл бұрын
Kei lylmm I have the same on my 97 Z28. Looks good, no spacers and doesn’t ever rub.
@keilylmm6377 3 жыл бұрын
@@bobsacamanojr9382 hell yeah.. if you get the correct back spacing you don't need wheel spacers.. however I'm going to have to roll my outer rear fenders just a little bit... I have a BMR adjustable panhard bar in the rear.
@ls1_cammeroh 3 жыл бұрын
I have the same setup on my 98 only thing I don’t like about wide fronts is the car goes in every groove in the road
@keilylmm6377 3 жыл бұрын
@@ls1_cammeroh very true my friend..
@latinotruthseeker8852 3 жыл бұрын
She's sitting nice.👌
@timtourt7548 4 жыл бұрын
hellll yeaaaa big fukin meats,big fukin hammer mod$$
@lzerep5425 3 жыл бұрын
How did you put the wide wheels on it or did you change it so they look good?
@maldo72 4 жыл бұрын
Good stuff thank you
@clutchergarage 4 жыл бұрын
maldo72 no problem man! Make sure that you watch part 2!
@maldo72 4 жыл бұрын
@@clutchergarage will sub to your channel ...
@robertcampos4204 3 жыл бұрын
Should 305s 45r17s fit fine on the back with no mods needed?
@jtvgobrazy 2 жыл бұрын
Were you able to find this question out?
@jrbird7571 3 ай бұрын
Depends on your back spacing of the rim. The tire itself is fine. Also are you lowered?
@Ben-mu3rs 3 жыл бұрын
Hubcentric spacers?
@birdfromhell7540 2 жыл бұрын
What was the offset for those 18x10.5 wheels you got on there? Those look mint 👌
@dylanryan9192 4 жыл бұрын
What size are the spacers
@clutchergarage 4 жыл бұрын
Dylan Ryan 5/16
@luxurycaddy8861 Жыл бұрын
are the front rims the same size as the back
@Legend22- 4 жыл бұрын
Replace the control arm with bmr then your will have room !!!
@clutchergarage 4 жыл бұрын
Very true! They are stronger yet the tubular design gives it more space. I am actually building the car and jus ordered my bmr lower arms and panhard bar!
@Legend22- 4 жыл бұрын
ClintonDIY that’s awesome yep they are easy to put in takes about an hour
@onthegoresto7742 3 жыл бұрын
I was just getting in here to say if you replace the rear trailing arms with some tubular ones, you'll have more room and more strength.
@adamsutherland7875 Жыл бұрын
out of curiosity, what do you have on the front?
@skittimgaming5277 4 жыл бұрын
what size rim/tire did you run in the front?
@clutchergarage 4 жыл бұрын
Skittim Gaming 275/45zr20 homie
@skittimgaming5277 4 жыл бұрын
@@clutchergarage appreciate it
@clutchergarage 4 жыл бұрын
Skittim Gaming my apologies man they’re 17s not 20s lol so 275/45zr17
@adamhenkelman5351 3 жыл бұрын
What are wheels off of. What size running on front
@choward874 3 жыл бұрын
Could have went 325's and been ok.
@joedirt8271 3 жыл бұрын
No i have 325 still rub
@md65000 4 жыл бұрын
What does it mean to "roll the fenders"?
@clutchergarage 4 жыл бұрын
Under the fender well. You stick your hand under there and feel and you’ll know what I’m talking about. But you basically jus roll the lip up
@abdrielsoto2026 2 жыл бұрын
What is your offset?
@Crimson_Ghost666 3 жыл бұрын
Car looks good other than those ricer tail lights you putting on
@bhcamaro2002 3 жыл бұрын
I have a similar one with blacked out led taillights. Keeping my stocks wrapped up, they go for crazy money now
@budd2097 2 жыл бұрын
@@bhcamaro2002 you ain't lying I'm looking for a driver side tail light. Hard to come by and expensive af.
@bhcamaro2002 2 жыл бұрын
@@budd2097 yup I wanna go back to stocks and lightly tint them
@FredySavage Жыл бұрын
Did he say 10.5 wide then 10.5 wide again 😭
@clutchergarage Жыл бұрын
Yes I did. Sometimes when editing you don’t notice stuff until it’s too late lol
@Rayvisin 11 ай бұрын
Could just run 315's and not turn it into a shitbox
@clutchergarage 11 ай бұрын
Well I hate to break it to you but I guess I turned it into a shitbox 🤣
@dcarden3031 4 жыл бұрын
Pointless just get a 28x10.5 tire competition compound and you want need 300+ wide tires.
@clutchergarage 4 жыл бұрын
Ehhhh it’s opinion man some people go for the super wide tire look. But yeah I got buddies runnin 28x10.5 on 17s an they do good but these hook like crazy too so
ThatDudeinBlue
Рет қаралды 372 М.
Mark Allen DeLisle
Рет қаралды 1,8 М.
A build in process
Рет қаралды 17 М.