For cool shirts, sweatshirts, and more check out the Just Diesels merch store: just-diesels.com

Sir you have one of the most informative channels presented exceptionally. Thanks. 3500 dully Cummins owner - greetings and respect to all from Durango Mexico

wicked build, great vid and ALWAYS clear info... EXCELLENT!!

Love the videos man, keep up the hard work, awesome quality!

Love that truck. Glad you’re back 👍

Keep up the awesome work! I have been enjoying your content!

Incredibly informative and helpful, thank you! Also your cameras and editing work are wicked high quality man.

Thank you. Exactly the info I was looking for

As the original owner of an 03 Ram QuadCab Cummins 4wd, I am glad you’re making videos on 3rd Gens. I mounted 35 inch Toyo AT2 on the OEM 17 inch wheels but couldn’t stand the lock to lock rubbing. I put on a wheel spacer to avoid the rub, but my truck profile looks

Yes! Thank god for this video. I know CJC, Carli, custom offsets and a bunch of other pros have videos on this but as a RAM fan only this is critical. I ran 33s on my stock zero offset wheels for years and I loved it except I couldn’t do 12.5 wides instead LT285s as the tires would rub the knuckle! Scary stuff man when you’re going 80 on highway literally wearing away at the sidewall. That was a young and dumb (and cheap) me. Of course I’m talking about a 1500 here and not a 2500, but there are similarities and benefits to IFS when it comes to running neg offset wheels because the steering is so much better than a solid axle. Now I’m more of a fan of keeping the ride closer to stock so no large lift just maximizing performance and keeping truck with a lower center of gravity and maximizing ground clearance on 35s. When I have a 3500 I’d love to do an AEV, carli or thuren system with only 3” of lift in order to run 37-40s comfortably.

Premo advice bro, loving your content, very straightforward n knowledgeable, cali's my preference for suspension upgrades to but I like the new mickey thompson baja boss A/t

My rams a 2018 but all of the videos I've watched cover the same year but don't mention the exact specifics you do in your video. Thank you for taking the time to explain things in such detail. Your right if you have to trim it doesn't fit!

Have an 06 2500 and you just totally saved my ass on dropping $ on -12 wheels lol thank you !

Great video again ! Man she is sooo clean 👌🏻

its amazing how fast your channel is growing. it feel like a month ago that I watched you for the first time and you had something like 1.6k subs. You're so knowledgeable and your production quality is on a different level. keep up the amazing work

Great information as always! Thank you.

Great work, I love the detailed info you put into your videos. I'd love to see the same info for a 2017-2019 superduty! Keep up the good work.

I love this truck, reminds me of my dads pretty sure it’s the same colour too

Good video Andrew! I’ve been a subscriber since last month when you made your OBS powerstroke vs 2nd gen Ram video!!!

My 35x12.50 Toyo RTs are just about done. I’ll put them through at least the rest of this winter, and then I’ll think I’ll get a set of 37s. Probably buy Thuren arms and see how it goes. I rub just a bit at full lock now backing out of a driveway on the factory arm. 2012 3500 Thuren 2” coils, track bar, and sway bar so far. AEV wheels which are 17x8.5 +27.

keep the great work man

2020 RAM 3500 Chassis Cab flatbed 4x4 6.7 Cummins. Nice content, much appreciated!

Glad you’re back. That truck is baddass. First. Lol 😂

Thanks bro you did good home work 👏

If only my uncle would come off his 1st gen cummins ext. cab dodge 😭 it was my grandfather's & I want it! Big boy has less than 200k original miles & is an absolute tank

I’m rocking negative -18 17inch rim 37 tires on 06 defiantly had to do trimming on carli suspension

Love the no nonsense technical videos! Question, have you towed with those 37's? I've got a 10k travel trailer, thinking side wall roll might be a issue . Thoughts?

Good looking truck.

Always dig your content! What camera are you filming with? Insane quality!

I have a question about wheels and tires for my 2012 ram dually 4x4. I don’t really like any of the dually purpose wheels available. Specifically the way the front wheels convex. I understand why they do but I don’t care about being able to run the rears on the front or vice versa by just flipping them around. What’s your thoughts on running wheels like yours on the front and getting the same wheels for the rear but doing offsets and a width that would not require a spacer and also would not stick out farther than yours do? I’m not opposed to trimming and running 11,5 or 12.5 wide tires. I have thuren parts on the front. And the rear is stock. Any help would be appreciated. Thank you for the content you put out. It’s very informative and accurate.

Good stuff bro. Dig the channel. I wanna clean my 2009 megacab up like this. It just sits in my driveway now that I have a beater to get back and forth to work in. What’s your headlight/ tail light setup? They look great

I run 37s on a 98 Dakota on 1tons. No problems. 16 inches of travel. No cuts

Love you're channel keep it up! I have a question. I understand what you're saying about the stock wheel being tucked in but if I put 37s on the stock wheel and have the high clearance control arms will it still hit?

Great video, very informative thanks. I have a stock 04 3500 HD with 35x12.5 and it does rub at full turn.... Thinking about going down to 33 x 12.5 ... or am I reducing the wrong tire dimension??

I have on 08 powerwagon with 37s fit on stock suspension with these wheel specs you gave

Great video and enjoy your channel. Did you by chance ever do a 37 inch tire fitment for 5th Gen Ram 2500/3500?

Are the Carli HIGH-clearance control arms necessary for the application you describe here (37’s on 8.5 wide wheels, 12.5” wide tire. On a +18 to +25” wheel offset). Or, would the regular Carli or stock control arms work? Thank you

This exact fender trim also works to clear 33x12.5's on -51 offset with a leveling kit... Just to throw that out there.

Please do a video like this one what wheel tire combo specs you need to fit a 37 properly on a 2nd Gen ram. I want to do it to the one on my channel but I want to do it the right way!

Will this work for humvee wheels and tires? I got a set for a good deal and wanna see about installing them

hey man, love your videos! Can you link to the rims/wheels you have on this truck? I LOVE THEM

Is that the carli leveling kit installed on that truck?

Very much enjoy your videos. I just picked up a set of Method 17x8.5 0 Offset. I'm going to put a set of 37's on that measure 36.7 x 11.4. Truck is an 08 3500 with a 4.5" Longarm lift. Thoughts? Hopefully only minor trimming

Recommendations for a 2006 dodge ram 2500 diesel on 37s with a +8” lift for stability and control over the roads

Great video I’m still waiting to buy my first truck, might buy either a 3rd gen, 6.0 f350, 73 f250, or 64 f250 what do you think?

I was wondering how you were mobbing down that dirt hill. then I saw it was on a 13k suspension setup. Nice truck

So, do your wheel offset specs only apply to a 3” lifted truck, or to a 6” lifted truck as well. Will a -12 offset, 17x9 with 4.50” backspace wheel fit a 37x12.5 on an 07 2500? Or is there still trimming involved. Appreciate this video. Lots of great information. Too late😁. I went over to CJC and ordered 5 of their Racelines. You sold me!

I have a 03 ram 3500 single axle I put 18 in oem steel rims off a 2018 ram with 295 70 18 and I rub on lock to lock what do think I can do to stop this

Andrew. Your youtube site and videos are the best. Very instrumental in helping me with my 3rd gen 5.9 build over the last year. Time for new (and quality) new shoes and I want to move up from 35's to 37's. (35's look dinkey on that beast). Currently, I'm running Pro Comp 20x9's with 0 offset (backspace 5). I got my mech and tire shop telling me that the Nitto RG's 37x12.50R20LT should be okay on those wheels with maybe only minimal cutting. Can I please ask you to evaluate this setup for me and share your thoughts as I respect your opinion. Thanks very much and keep up the awesome videos. r.

My understanding of wheels is minimal. Would a stock 17” wheel work with 37s and this kit?

What is your measurement from center hub to bottom of the fender. I don’t want to lift much

Hi, I have a 2013 2500 5.7 with 18”x8.5” wheels and +10mm offset. Do you think I could run a 37”x13.5” tire with this setup? I’m willing to run 12.5” but was just curious since you’re running the 13.5” with less offset and a wider wheel than I have. Curious what tire that 13.5” is as well? Thanks!!

Can you give the details on those rims you have? Those are great and I’m interested where you got them.

I subbed you channel for more info. I do have a question for you , I have a 2010 2500 deez 4whl dr, I found some general grabbers X3's that are spec supposedly 10.1 tread width in inches, 37x 12.5xr17size, I have a RC 2.5 leveling kit on it, no lift kit, can I run them with 37's without going thru everything you said in the vid. Or should I stick to 35's. I live in Fla, an its mainly a part time on road truck, with some 2 track trails in the swamp for hunting, think deeper puddles an some swamp that get flooded in the rainy season, or the dirt road I live on during hurricane season. Yes it floods to 3 ft deep at times, hence the thought of running a slightly taller tire, Factory wheels also. BTW. I'm retired an not looking to build a monster truck like I did 40 yrs ago. More into the KISS principle, with durability being #1, not alot of mods to it. Thx, your thought on this are appreciated Bill Mc

I’m wanting to fit 37’s on my 2011 with just 2” thuren coils and stock 17’s 🔥

What issues did you have with the Metalcloak control arms? I have those on my truck right now and want to know what I should look out for.

Does the offset and backspacing guidance you have here also apply with a dually? All the posts I see on 35s plus with duallys mean you need spacers, which I'd love to avoid. Not as many options it seems for the dually?

Any advice on bumper sag?

I'm about to take the plunge and move up from 35" to 37" on my 2005 3500 ( currently a 3" lift). You mention early in the video your recommendations for wheel size (8.5" to 9" width) and offset (+18 to +25) for 37" tires. You then mention that you run a 5.5" backspaced 9.5" wheel that is about +6.8 offset and a 37x13.5". So I'm a little confused about the use of the two different wheel references (offset, then using backspacing). I think in the comments later you mention using a 8.5" wheel. Just trying to clarify before buying... I"m looking at a 17x9" wheel with a 5" backspace. Do you feel this will require too much trimming? With my current set up I'm already rubbing on the control arms. Thanks for any extra help!!!

I need your help Andrew, I’m completely new to this. I have an 04 ram 2500 5.9 rwd (Early 3rd gen) that I want to lift 6 inches and then put the exact same rims and tires as your truck (I really love the look).. will it work? Would I need to cut my fenders or get a longer control arm? Please help before I go on and purchase everything.

Even though you got a Carli setup, will that wheel-tire configuration work if a Thuren setup is used instead?

So if I were to fit 40s what lift would I need and wheel specs

I need help on my 08 3500HD 6.7 Cummins 2WD Dually ? No one makes a lift kit for me that is good ? I need lift spindles in the front and tubular A arms in the front and Springs too. I only want to lift like 3 inches ... I need help !!!

So I’ve got a Carli backcountry lift on a 2013 ram 2500 with a +25 offset 17” wheel. I can’t decide between a 37x12.50r17 and 37x13.50r17. Is there anyway you know if I would have to trim for these? I currently have mud flaps on that I would like to keep but if I have to trim for the 12.50 I would obviously be taking off the flaps. I would prefer to run the 13.50 and the mud flaps but I haven’t been able to get an answer from anywhere. Any advice would be greatly appreciated.

So to say that if I run a 17x8.5 with a +18 offset on my leveled 12 RAM 2500 CTD on 315/70-17's I will not have any rubbing? I did replace the track bar with a Carli which did center the body over the frame, because right now my wheels have a -6 offset and I do get slight rubbing on the left side inner wheel well liner when I make a full left turn.

What is your process to recal computer for bigger tires. I have an 06 and just installed 37s.

Hey man which Yakima rack is that on your bed?

Ok so I bought my truck lifted already. Has the 5in rough country and I have 37x13.5x22 under it. The rims are fuels (not sure what model) and also have the fender flares. I have cut what I can but still get a bit of rub on the full turn and hitting a bump. Would putting a 1 in spacer on to get rid of the rub?

Is it possible to make 37x13.5r18 clear without any lift kit or leveling kit on an 18x9 +18 offset and 5.75 back spacing on a 3rd gen

I have a fabtech 4.5 inch kit on my 06 will i be able to run 37's ok with your wheel specs? Im currently running 22x12 with 35's -55 offset and they rub at full turn

I looked up a Carli suspension for my ‘03 Ram 2500. All the suspension kits look to be for 4x4 trucks only. My truck is a 2WD, any recommendations for a good 2WD suspension?

A 9.5” wide wheel with 5.5” back spacing is +19mm offset correct? I want to fit 13.5” wide tires and wasn’t sure what the +6.8 offset was referring to.

I got a full thuren suspension and I'm pretty close to you. If you want to do any comparisons let me know

So if I get the correct rims I could run 37's without a lift? At least till I'm ready to decide which lift I want.

Hey Andrew, can you post video of your truck doing some more of this 4:35

So the rear suspension is all stock no, 2 inch block or added leaf springs?

I have a 08 2500 with a bds 3 inch lift. I'm mounting 37s on 18" x 9" method 305 with +18. Trimming I'm okay with but I'm hoping I don't have to buy the high clearance control arms. Do you have insight of much rub I might experience?

Question for you, I just put the Carli 3" with extended control arms on my 06 ram. I have 17" Trail Ready Beadlocks with with 4.5" BS...Can I do 37x12.5s with only trimming the pinch seam?

Would I need "significant" trimming if I run BFG All terrain 37x12.50R17 on Method 315 with 0 offset and 4.75" backspacing? 2006 2500 and 3" lift

I have 2006 dodge ram 2500 power wagon and my steering wheel when I was driving it was locking why is that

What about fitting 37s on a 2 gen I really need to bring down my cruise rpm

please provide a link to your exact wheels. thank you.

Will these Fuel rims (D531 Hostage Matte Black, 17x9" with the 8x6.5 (8x165.1) bolt pattern +1mm offset, part number D53117908250) work with a 2005 3500 with 3" thuren lift-full control arms etc.. Sorry not understanding this.

Question, you say you run +6.8 off but you said you need +18 to +25 to run 37. So do need +18 to +25 in order to not have to trim

Will this work on a second gen? If not can you make a video like this for them 👍🏻

Which is the best between +18 or +20 or does it matter?

Is it possible to install 39 x 13.5 r17 tires on a 2005 RAM 2500? I have a 5" lift kit. tanks

Now on a dually.

now put 40s on the 2nd gen :) jk its too perfect to cut up

Where do you get your music?

Is that your girl driving your truck while your recording? Anyways badass truck man. I love these off-road type builds or just classic grandpa trucks

Metal Cloak arms worse than stock or just not as good as Carli and Don Thurens?

Drink every time he says Fit.......passed out by 2:20. Lol

Not me sitting here with just buying -12 offset wheels, wondering how I can fit these tires 🤦‍♂️

"You can't go to negative". Me, who just bought -44s to run 37s on my 04 1500, Oh 🤣

My stock Silverado rubs 30”s full turn😂

Re gear for 37’s?

So at 1:53 you could turn lock to lock and not run at all.

Your tires rub ina turn at full stuff

You spent $10,000 plus on the suspension? Man I wish we could all do that.