4th gen Ram 2500 3500 37x13.50 on Factory 17s with a 2.5 inch level and no trimming
Рет қаралды 10,902
2 жыл бұрынStryker Off Road Design Control Arms-
strykerordesign.com/products/...
Dynatrac Ball Joints-
www.dynatrac.com/hd-balljoint...
Looks like the Cooper Discoverer STT are getting hard to get.
www.discounttire.com/fitmentr...
@derekwest2 Жыл бұрын
Nice truck! Very clean setup.
@jp2073 Жыл бұрын
Looks nice, How wide are your wheels(stock width?) Have you thought about widening your stock wheels? Thanks
@TheOhanaBennett Жыл бұрын
Pretty unique video and very helpful. I’m in nearly the exact same boat. Mine’s a 2018 2500 Limited Crew Cab. Not a lot of info out there on fitting 37s with the stock wheels. Much appreciated. By the way, what headlights are those?
@Ears82 Жыл бұрын
Alpharex Pro-Series G2
@natejones1502 Жыл бұрын
Which control arm did you go with from oreillys?
@_Machine631_ Жыл бұрын
man i cant decide on lift i want for my 2012. hows the height with the 37's? i want something higher but not where i have to get a running start to get into. haha
@Ears82 Жыл бұрын
Its definitely rough for me without the steps. I have them off right now while I make some plates to reinforce the mounts.
@guyherro6870 Жыл бұрын
If you don't mind sharing, what size/offset wheels? I know that plays a big role in clearance.
@Ears82 Жыл бұрын
Whatever the factory wheels are. That's another reason I had to do the control arms. If I went with aftermarket wheels I could have changed the offset some to keep them from rubbing.
@highdesertexplorer123 11 ай бұрын
I’m currently running 35’s on factory 18” wheels on my 23 ram 2500 4x4 with 2” level kit. I want to do 37x12.50x18 have you had any issue’s running those tires on factory wheels? My factory aluminum 18’s are 8” wide and it seems most 37’s require a minimum of 8.5” wide wheel.
@Ears82 11 ай бұрын
No problems at all with the firment to the wheels.
@sergioamescua3460 Жыл бұрын
The Rig looks good. Just like it should. Can you tell me what gears you have on the truck and what is your mpg now?
@Ears82 Жыл бұрын
3.73. I'm getting about 15mpg average. Its pretty hilly where I'm at. If I was somewhere more flat, fuel mileage would probably be a little bit better.
@sergioamescua3460 Жыл бұрын
@@Ears82 thanks for the data.
@christopherhuffman1495 Жыл бұрын
How's the rubbing now that you have driven it for a while?
@Ears82 Жыл бұрын
Its still there. Lol. I've learned to work around it.
@YOUARESOFT. 7 ай бұрын
rubbing on control arms? was it worth even changing out the arms??@@Ears82
@Ears82 7 ай бұрын
@dirtsky lol! It was definitely worth it. Even if I go down to 12.50s there will be no rub at all unlike if I had the factory control arms. And if I had the factory control arms with these 13.50s I may not be able to even drive it much.
@javierpena1735 Жыл бұрын
How are yours not rubbing on front sway bars??? Got a 17 mine rub on em pretty hard obviously on a close to a full turn
@javierpena1735 Жыл бұрын
Clean truck by the way!!
@Ears82 Жыл бұрын
Just looked at the sway bar and it does have a little bit of a rub mark. They hit the control arms first though. Also, since the control arms are squared off, the tires catch them a little bit more.
@ericestep9880 7 ай бұрын
I got a 2011 same as yours. Wondering if 37x12.50’s will rub. I have the same wheels they are sharp. I have a 2.5” level as well.
@Ears82 7 ай бұрын
I think if I had 37x1250s mine would not rub at all with the control arms I have. Otherwise you will probably need wheel spacers.
@ericestep9880 7 ай бұрын
@@Ears82 does it just rub at full lock?
@Ears82 7 ай бұрын
@ericestep9880 yes. It could be mainly due to them being mud terrains. I'm not sure if on the next set I'm going with a 12.50 or 13.50 AT.
@ericestep9880 7 ай бұрын
@@Ears82 I’m thinking about the toyo rt trail. They seem nice looking. 75 pounds each. Not bad. The factory 17’s are 25 pounds each
@DaltonP2156 Жыл бұрын
I put Carli 2.5 and 37 x 12.5 2 inch spacers and it rubs bad over bumps and in reverse
@Ears82 Жыл бұрын
If its rubbing the back side of the fender liner this will help. I still had a little bit of rubbing on the fender liner itself after doing the control arms. Nothing a heat gun and a bungie hooked to the frame pulling the liner back couldn't fix.
@natejones1502 Жыл бұрын
What did you end up doing I have the exact set up as you same problem
@DaltonP2156 Жыл бұрын
@@natejones1502 I trimmed more of wheel liner plastic and ground down pinch weld
@YOUARESOFT. 7 ай бұрын
could using 1/2" wheel spacers helped?@@DaltonP2156
@eh235 6 ай бұрын
I have a 4th gen with cummins and my front shocks sit outside the coil springs unlike yours that fit inside the coil springs like my brothers 3rd gen with cummins motor.
@Ears82 6 ай бұрын
Is yours 2013 or 2014 +? Thise have different suspensions than the 2010-2012.
Heartland Adventures
Рет қаралды 9 М.