How To Fit Larger Tires on a Toyota Tacoma: CAB CHOP!!
Рет қаралды 16,394
3 жыл бұрын👋 It's about time for the cab chop on my Tacoma! This is a great way to get more tire clearance for a wider stance and a larger tire!
👋 My 3rd Gen Toyota Tacoma FINALLY GETS the Cab CHOP!! 🏎
🤠Bros FOURR Speed Apparel : teespring.com/en-GB/stores/br...
😈 SUBSCRIBE: / brosfourrspeed
❤️ Follow my IG / brosfourrspeed
Our Car Accessories:
- Car Jump Starter: amzn.to/2l75gGA
- Battery Tender: amzn.to/2WHFk2N
- Car Phone Mount: amzn.to/2KCRLYP
- Daily Driven Sticker: amzn.to/368Ry8Y
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cab Chop Plates: www.rogue-offroad.com/product...
Follow ALEX: @Dollythedatsun
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📺 OUR TOP PLAYLISTS :
Tacoma Videos: • Toyota Tacoma Videos
GT-R Videos: • Nissan GT-R Videos
Supra Videos: • Toyota Supra Videos
Review Videos: • Car Review Videos
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🗣 TALK TO US ON SOCIAL MEDIA !
Instagram 🙋🏻♂️ / brosfourrspeed
Facebook 🙋🏻♂️ / brosfourrspeed
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 WATCH MORE OF OUR AUTOMOTIVE VIDEOS :
Toyota Tacoma ceramic brake install: • Installing Performance...
High clearance rear bumper install: • INSTALLING Relentless ...
Best wheel/tire combo: • What Is The BEST Wheel...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔮 WATCH OUR OLD VIDEOS :
TRD Offroad Cheaper than TRD PRO: • I TOTALLY Transformed ...
Lift kit install: • The BIGGEST MOD For My...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔥 PERSONAL FAVORITE VIDEOS OF OURS :
Hybrid front bumper install: • Giving My 3rd Generati...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
❤️ YOU MAY ALSO LIKE :
Total Chaos Fabrication: • How To Install Body Mo...
Taco Twonz: • Video
Adventure Built: • 2020 TACOMA ON 35'S - ...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 About this video : In today's video we install the cab chop plates for the 3rd gen Tacoma! This is a relatively easy process when you have the right tools! The hardest part at least for us is having a plasma cutter and being able to weld. It's great to have friends that can do this type of work and be able to show how it's done! Once we removed the fender flare and liner it was time to mock up the plates to get our measurements and then start cutting! If you can use this type of tool, I think it's much better than using an angle grinder, we would have been cutting for a long time. After the cut is cleaned up, it's time to tack weld in the plate, make sure it's a good fit and then finish welding it in! After that we sprayed it with paint to give it a nicer look and then flattened the pinch weld for even more clearance! I found it to look so much nicer keeping the fender liner in one piece vs having it hanging and not looking finished. Then I finally added my wheel spacers which give the truck a nice look and now I have clearance for new wheels in tires in the future!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👋About this channel: What's Up Everybody! And Welcome To, Bros FOURR Speed! We are two brothers, Mike and Brian, and we love cars and anything automotive related! Currently own a Nissan GTR, Toyota Tacoma and Toyota Supra! We started this channel filming in the backyard just doing fun things like riding dirt bikes and skateboarding! We never knew that filming at such an early age would eventually lead us to a successful channel and the amazing opportunity we have to drive very cool cars and film anything automotive related! We enjoy working on our own cars and showing the DIY process and how you can save money doing these installations! Feel free to smash that subscribe button along with the notification bell to stay up to date on our daily uploads and what we have going on! We bring you unbiased reviews and vlogs involving sweet cars, motorcycles and anything with wheels and an engine!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🎉 THANK YOU FOR THE SUPPORT! ❤️💙💚
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / COLLABORATIONS :
Want us to promote your product? Email for rates and availability 🤝
Email: brosfourrspeed@gmail.com ✍️
www.epidemicsound.com
#toyota #tacoma #tacomacabchop
@coachcampana 2 жыл бұрын
I watched this and one other video, took some screen shots, and did my driver side cmc today. Very helpful showing some details. Im glad this video was here. Thanks.
@BrosFOURRSpeed 2 жыл бұрын
Glad it helped!! This was a fun project and still have no issues with it! Definitely very helpful for the 34's I'm running now!
@jaylena682 3 жыл бұрын
looks awesome!!
@BrosFOURRSpeed 3 жыл бұрын
Thanks!
@billhenderson8340 11 ай бұрын
Man great job and looks great wish I could get you guys to help me chop mine, have fun off roading
@BrosFOURRSpeed 11 ай бұрын
Thanks 👍 definitely helps with clearance!
@cjzx325 3 жыл бұрын
Nicely done! Now you're ready for the larger tires and really give the new Jeep a run for its money!
@BrosFOURRSpeed 3 жыл бұрын
You got that right!
@darriontunstall3708 3 жыл бұрын
It looks great!! I like it
@BrosFOURRSpeed 3 жыл бұрын
Thanks! Fun project to work on!
@darriontunstall3708 3 жыл бұрын
Bros FOURR Speed y’all welcome
@pininfarina575 3 жыл бұрын
that garage has a plasma cutter and a welder, but no hammer.
@BrosFOURRSpeed 3 жыл бұрын
lol, we had normal hammers. But needed something with more weight to bend the metal.
@ShootingSportz 3 жыл бұрын
Another great vid! I just picked up a 2021 TRD PRO in December, and I am already thinking about ripping out the fox suspension and going for a lift. Would I still need a CMC if I get a 3" lift?
@BrosFOURRSpeed 3 жыл бұрын
Oh nice man! I'm sure you could also sell the Fox suspension and get some money for it! You really only need the CMC if you're planning for larger then 33in tires. I have 34's on the truck now and they clear just barely now
@2fsquared741 3 жыл бұрын
Nice and clean
@BrosFOURRSpeed 3 жыл бұрын
Thanks!!
@MrHalospartan117 3 жыл бұрын
Awesome looking truck!!! Did you get the speedometer recalibrated for the bigger tires? Is it necessary to do it? Or is being off by about 5mph not that big of a deal?
@BrosFOURRSpeed 3 жыл бұрын
I have not done that! Speed is less than 5 off at 70 MPH. So not a big deal. But I may do it at some point
@hobbiefreas2001 2 жыл бұрын
Hey i am wanting to get the largest tire on my tacoma i can on my 3rd gen, i dont mind cutting or remolding plastics but am not skilled with welding and dont want to do a cab or mount chop. Whats the largest tire i can fit without a mount chop?
@lishaanair6675 3 жыл бұрын
It looks nice and I like it so much👍
@BrosFOURRSpeed 3 жыл бұрын
Glad you enjoyed it!
@lishaanair6675 3 жыл бұрын
@@BrosFOURRSpeed actually I'm the same person who ask u to do a video about BMW K1300r
@BrosFOURRSpeed 3 жыл бұрын
@@lishaanair6675 That's a bike? Haven't seen that one yet.
@lishaanair6675 3 жыл бұрын
@@BrosFOURRSpeed I have seen them but I just want a video about that bike only...by the way I'm from Malaysia and may I know where r u from?
@BradleyJokerst 3 жыл бұрын
Will this void any warranties? I just got a 2021 Tacoma yesterday with a 3” lift and 285/70/17 tires. I’ve already trimmed some plastic away because I was rubbing and I can see how I’m going to be super close to that cab section once my suspension settles in.
@BrosFOURRSpeed 3 жыл бұрын
Not at all! There's nothing for it to void by cutting that away.
@t-bone4908 3 жыл бұрын
What lift kit do you recommend for a 2020 Tacoma TRD off road 6 inch lift ?
@BrosFOURRSpeed 3 жыл бұрын
I'd stick with a 3-4in lift. Better ground clearance overall and I've never had issues off road. OME has the kit I'm running. Fantastic kit!
@bryanlee707 3 жыл бұрын
Why did you remove the new fender flares you just installed in the recent videos. I clicked on the link to order them but it would not work
@BrosFOURRSpeed 3 жыл бұрын
I thought I fixed that link!! But they were just too bulky and I never really liked them, very cheap, but they weren't expensive either so I figured I'd try them. But I'm happy with the stock ones again.
@sergiolopez2797 3 жыл бұрын
I am about to do that to my fj cruiser is that safe to do and won't mess up your truck??
@BrosFOURRSpeed 3 жыл бұрын
Just cutting off the corner like this isn't bad as long as you weld in the new plate. It's not structural as much as the rest of the frame. I haven't felt or seen any issues since I did this.
@pooptyschmoopty 3 жыл бұрын
What settings did Alex have on his welder?
@BrosFOURRSpeed 3 жыл бұрын
Honestly I am not sure on that one! That was my first time being around welding which was neat to see, but I don't know anything about the equipment!
@bentplate84 3 жыл бұрын
You need to max out your positive caster on your LCA cam bolts. You should have way more clearance than that.
@BrosFOURRSpeed 3 жыл бұрын
I have thought about going and getting another alignment to check that out!
@fotomotoxxiii 3 жыл бұрын
Awesome! I'd recommend getting upper control arms next!
@BrosFOURRSpeed 3 жыл бұрын
I do have spc's on there now!
@fotomotoxxiii 3 жыл бұрын
@@BrosFOURRSpeed oh right on I must have missed that video!
@BrosFOURRSpeed 3 жыл бұрын
@@fotomotoxxiii I did that when I put the lift on! I know there are adjustments I can make, but haven't looked into that yet.
@fotomotoxxiii 3 жыл бұрын
@@BrosFOURRSpeed got you. We are about to put old man emu lift on my ladys tacoma so I'll be rewatching that video soon.
@BrosFOURRSpeed 3 жыл бұрын
@@fotomotoxxiii It wasn't too bad, the rear tool longer surprisingly.
@DOOSHEAN 3 жыл бұрын
Looks good! I just relocated my cab mount. There’s so much room now.
@BrosFOURRSpeed 3 жыл бұрын
That's taking completely off right? Rewelding behind where I did?
@DOOSHEAN 3 жыл бұрын
Bros FOURR Speed www.runnin4tacos.com/collections/2016-2018-toyota-tacoma/products/cab-mount-relocate-kit-for-2005-2019-toyota-tacoma
@DOOSHEAN 3 жыл бұрын
Bros FOURR Speed That’s correct. It uses the same mounting points on the cab, its just welded to the frame back further, giving you a couple more inches of room. I used the mounts from Runnin4Tacos, but there’s quite a few different companies that make them.
@BrosFOURRSpeed 3 жыл бұрын
@@DOOSHEAN I've seen that mod, maybe one day, this is a good start lol
@DOOSHEAN 3 жыл бұрын
Bros FOURR Speed Yeah for sure. It looks good. Its definitely worth it if you still rub there offroad.
@jamar4981 3 жыл бұрын
What’s the make and model of your front bumper?
@BrosFOURRSpeed 3 жыл бұрын
Body Armor Hybrid. I really like it!
@reeseperry8171 3 жыл бұрын
Mike why didn't you just buy a spring/strut 2-3" lift kit? Would your tires still have rubbed? I have 285/70/17's and I have a 2" front and 3" inch rear lift but just bought a 3" front coil spring/strut spacer that I am replacing the 2" with. I have minimal rubbing at the moment so I hope the 3" takes care of all rubbing. What are your thoughts?
@BrosFOURRSpeed 3 жыл бұрын
I already have a lift kit in this video! I have around 3.5'' up front and 3'' in the rear. I didn't have any rubbing on my first set of wheels/tires, but with these once I added the spacers I knew I needed the extra clearance. Now I'm running 34's so I was planning for that as well!
@reeseperry8171 3 жыл бұрын
Ok thanks man. I have 33” Crosswind MT’s with 17x9” Fuel 648 wheels. I really enjoy your videos.
@reeseperry8171 3 жыл бұрын
I wish I could add an image of my truck on here but it doesn’t give me that option.
@BrosFOURRSpeed 3 жыл бұрын
@@reeseperry8171 That's a similar setup to this video, 17x9 with 285's! Did fine without the spacers! Thanks for checking out the videos!
@BrosFOURRSpeed 3 жыл бұрын
@@reeseperry8171 You can send us a message on IG! That's the easiest way to do messages like that!
@oreally8605 3 жыл бұрын
The real test is winter. Does SC get snow?
@BrosFOURRSpeed 3 жыл бұрын
We get like 1 day of snow each year lol
@RedWingsninetyone 3 жыл бұрын
When will we get an update on the oil catch can?
@BrosFOURRSpeed 3 жыл бұрын
I thought I did that, opps...I just recently changed the oil and have about 1/4'' of oil in it, so it's working and doing it's job!
@dragonite986 3 жыл бұрын
Maybe disconnect the battery terminal so when you were pounding the pinch weld you wouldn’t set off the airbags...
@BrosFOURRSpeed 3 жыл бұрын
Not a bad tip. But I don't think a sensor is that close to where we hit it. Also it takes a ton more force to activate an airbag sensor. Pretty sure Mythbusters tested that out and it wasn't possible by hand to get them to activate
@lukejaved7799 3 жыл бұрын
Nice vid
@BrosFOURRSpeed 3 жыл бұрын
Glad you enjoyed it! This was a fun project for the Tacoma!
@lukejaved7799 3 жыл бұрын
Do you know what wheel/ tier combo you want for the future? I remember you talking about how you wanted wheels that had the right offset.
@BrosFOURRSpeed 3 жыл бұрын
@@lukejaved7799 I think -10 off set and a 34in X 12in tire would be perfect! Almost there
@osamaabdelgader9426 3 жыл бұрын
really good job guys !! tire size 295/70/17 ?
@BrosFOURRSpeed 3 жыл бұрын
These tires were 295/70/17! But I recently went up to 305/75/17 (34's) and still don't have much rubbing!
@osamaabdelgader9426 3 жыл бұрын
@@BrosFOURRSpeed yeah Im going 295/70/17's. Good stuff man !!
@BrosFOURRSpeed 3 жыл бұрын
@@osamaabdelgader9426 I meant 285’s! Oops, but you shouldn’t have any issues depending on your offset!
@blackobsidian7905 3 жыл бұрын
Nice tool bro for tacoma great.. 😀
@BrosFOURRSpeed 3 жыл бұрын
Thanks!
@805kicks 24 күн бұрын
How much for a chop like that and welded
@BrosFOURRSpeed 24 күн бұрын
Not too sure. It will depend on the shop. I just paid for the materials since this was at my friends house. But maybe budget $200-$500
@sergiolopez2797 3 жыл бұрын
I'm just a little nervous 😓😬 I don't want to do that and screw up something else
@BrosFOURRSpeed 3 жыл бұрын
It wasn't too bad of a project. As long as you can or know someone who can weld and get that piece cut off!
@andrewworkman4905 3 жыл бұрын
What’s the benefit of doing this?
@BrosFOURRSpeed 3 жыл бұрын
It adds clearance for the tires, I showed that in the end of the video. I won't rub as much putting larger tires on or adding the spacers like I did.
@kylestokley91 3 жыл бұрын
You didn’t need to do that if your not planning on running bigger tires. Just set the UCA to E
@BrosFOURRSpeed 3 жыл бұрын
I am planning to run bigger tires, I mentioned that, but I have seen adjustments to make on the uca, so I still need to look into that!
@kylestokley91 3 жыл бұрын
Bros FOURR Speed definitely cuz it’ll save you having to do extra stuff lol.
@BrosFOURRSpeed 3 жыл бұрын
@@kylestokley91 I definitely need to try!
@bentran3657 3 жыл бұрын
Hi :D
@BrosFOURRSpeed 3 жыл бұрын
Hey! I like the supra pic, you have one?
@travisnishimoto7439 2 жыл бұрын
Bye bye warranty incase you have any rust issues
@BrosFOURRSpeed 2 жыл бұрын
I coated it really good and of course can monitor it to make sure, I don't like in an area where that would be a major concern either, so I'm not worried about it.
@jesseochoa5964 2 жыл бұрын
Looking to possibly do this for someone I know and was a great video and some great tips to get it done but please invest in a hammer. Lol 🤦🏽♂️
@BrosFOURRSpeed 2 жыл бұрын
When you don't have one readily available, you have to improvise! Nothing wrong with that lol, it worked great!
@jesseochoa5964 2 жыл бұрын
@@BrosFOURRSpeed great job man. Thats true. Atleast it worked. Haha
@BrosFOURRSpeed 2 жыл бұрын
@@jesseochoa5964 Yea, not the right way to do it, but it’ll work! Been a great mod!
@user-qm5fj5yy1e 3 жыл бұрын
اذا طلبت رابتر من جولي شيك 🤣🙈
@BrosFOURRSpeed 3 жыл бұрын
I wish I could understand the translation for that!
@user-qm5fj5yy1e 3 жыл бұрын
@@BrosFOURRSpeed Ford raptor 😍👍💪💪
Jason Derulo
Рет қаралды 103 МЛН
TacomaBeast
Рет қаралды 126 М.
Bros FOURR Speed
Рет қаралды 78 М.
Bros FOURR Speed
Рет қаралды 77 М.
Arkansas Offroad
Рет қаралды 15 М.
Chris Customs
Рет қаралды 11 М.
Zulfiqar Ali 1
Рет қаралды 32 МЛН
OYBOY
Рет қаралды 1,8 МЛН