I can’t thank you enough for the second fix. I had a 50m+ outdoor cat 6 cable running to my outdoor office and the cable snapped. I managed to apply the second fix and now the internet is back. No latency issues at all

Thank you so much, my cabel broke and I worried I would have to buy a new one, but thanks to you I was able to fix it. I'm really glad that I found your guide.

Hey I just cut a cat5 cable,your vid save the day!!! I thought I had to wait for cable company to come n fix it plus charge me for cut it🤪 I was doing some lite demo next to it,just did what you did.thanks man!!!

very nice video, thank you for sharing us! I skipped the first part of the video as i didn't have a new connector. So my cable was broken by the connector, and i had an old cable with a right connector.. I cut off, and link just like in the video. Works like a charm! :D

My Goodness! I'm over the moon that your instructions worked the first try. I was expecting glitches if it did work but the connection is clean and smooth. Thank you very much, Caramba Hacks! You've saved me valuable time and money.

Very helpful video my dog bit my wire, second part of the vid was very helpful.

Just did it and it worked!(the second tutorial) Thanks a lot!! It took a while and it wasn't as clean-looking as yours but it works just as good. A tip for any fellow attempting it, avoid my mistake and instead try to cut equal lengths on each side. It will be easier when you are twisting the cables together.

Thanks a lot! I made a mistake in the beginning, assuming that always similar colors belong next to each other. I can recommend anyone having trouble really checking the right order!

You are amazing and just saved me a week of non-paid vacation from work! Thank you so so so much!

Hey man just did this now becuz my ping and pocket lost so high thank you so much dude!

Took two tries, but it worked. Thanks!

You’ve just earned a new subscriber☺️💯💪🏻🔥😎

Wow! Thanks for the vid, specially the 2nd part. Our dog bite & cut my Internet cable and you saved my job from home during this pandemic. Big thanks from 2020!!! 😁👍

3 years later and this it’s still helpful in 2021 thx a lot it help

Great also to use the second tip to create a longer cable out of two cables. Who doesn't have a bunch of cables that are just a little bit to short to be useful. Then you can use the cut-off to repair a cable where the clip is damaged.

Very good, my puppis have cut my workstation internet cable thst cut my working computer out of the net (45ft distance and no Wifi on the computer, you saved my day man!

tysm man my ethernet wire was ripped in half and did exactly what you did in the 2nd part and it worked perfectly thanks again c:

Used the second part of the video but with tiny heat shrink tubing over each twisted pair and then a karger sleeve of heat shrink over the lot. Worked like a charm, I needed to make a custom cable for a telescope controller, so the pairs were specific to that application.

OMG just did the second part was prepared to buy a new one THANK YOU SOO MUCH

Thanks for this video, helped me a lot!

Great video. I had problem 2 and followed your instructions. Problem solved! Thank you for your help.

thank you!!!, i just repaired my cable with your help! 😊

I just used ordinary scotch tape hehehe cuz we ran out of electrical tape. Did the same procedure as shown on the second method, everything worked perfectly. Thanks!

OmG....I wish, I found this yesterday.. I really needed this video. I had to run all new cable and cost me $80. Crap - I could of fixed for "FREE" !!! This video will be burned in my head for-ever !! Thank you !!!

Second part of the videos was a savior!

Very useful video. I rarely find useful video recommendations on KZfaq.

Thanks a lot! It works :) Love from Reunion Island

thanks man!!! great and useful video!!! good job👍👍👍👍

Nice video, my Ethernet cable was recently cut so I will be trying this then I get home

i comment on very few videos. you rocked man

This is one super tutorial ever 💪🏾 thanks

Very interesting. Thanks. I've done a similar thing but crimping or using a rj45 inline coupler is another option.

you made it look so easy! Thank you!

Thank you very much .. you just save me today .It is so helpful video .

awesome guide dude, even more awesome music, cant even find it anywhere well done!

Problem 2 is me. I didn't think about bending the wires back and taping around the cords. I've spliced and put ethernet cords back together but it didn't look nowhere near this neat. Clearly wasn't thinking outside the box. Thanks for the video.

part 2: very smart solution. Thank you !!!

Great it actually works Here after I had cut my cat 5e cable and came to this video right here and it worked

first i want to say thanks bro tanks so much and may GOD bless you man,like i fixed the cable and its now working on using the second tutorial thanks man

Wow very easy and quick fix. Thanks for the video.

Omg I can’t believe it worked it’s like a magic trick and I saved 50$ on a $50 cord thank you so much!

Brilliant. Well done MacGyver !!!

Thank you so much my puppy tore it apart and your vid helped soo much.

Thanks for the usefull video, you helped me out

The second one worked for me. I didn't want to fiddle with the tiny box endings so I tried the second solution and the cable worked. Good tutorial.

commenting by using it fixed my cutted cable u saved me man

Thank you, really needed to know

took me like 2hrs accidentally cutting the wires but FINALLY did it THANKS.

Thank you, this was very helpful.

This cable fix/hack worked, thank you. I subbed

wow, great videos thank your for sharing

great video thank you!!

Muchas gracias!! Súper útil funciona a la primera 😊😊😊😊

Each pair of wires are twisted internally (called twisted pair) so that data can transfer with minimal interference. The explanation in the second part of the video MAY cause slower connection speed. This probably won't matter for most people (because you don't get close to the maximum transfer speeds normally), but for some it will matter greatly.

Thanks, you saved my day.

Awsome!!! Clean and simple.

Muchas gracias, me ayudó a resolver mi problema. Dios te bendiga.

My rabbit decided to go through my ethernet cable...option 2 is a life saver!

You're a life saver bro thank you so much it worked perfectly for me....

Many many thanks to you and your labour.

Thanks, It’s helpful ! 👍

literally thank you my dog ATE my cable that goes into my wall from the outside. I’m over here freaking out about getting a repairman because my mom works from home so no internet is BAD

Took a long god damn time, but I did it! Cheers to me. Thanks for the video brother.

When splicing a cable together, it is best to use a keystone and an rj45. Twisting bare copper together will cause latency loss which will effect network speeds. Electricians do this all the time and I have to follow behind and fix them. All in all, if your home run gets chewed in the center. Just buy a new pre-terminated cat5/6 cable or buy cat5/6 cable and terminate it yourself. Youll thank me later when your loading issues on your favorite streaming service work properly.

It was a nice idea and i have to say it help me to complete my work..

I got a tournament in a game coming up and this helped me so luch

It was a LOT harder than it looks, but i managed to pull it off. Thanks for the tutorial!

Great. I always step on them and need to start reparing them myself without buy "expensve" tools.

Great video, thanks a lot

In lockdown and no one to repair the Ethernet wire thnx very much

Very Helpful video Thanks.😁👍

Thanks bro you really don't knkw what you have did for me

Perfect job ,,, so admire specially using normal tools

Simple enough thanks 🙏

Fantastic. Thank you for sharing

Nice,Learn more knowledge from you~~

Thank KZfaq very much. I have 28 cables to fix like this way.

Bro you saved my life thanks

We're going to need a continuity test after that second one 😂

It worked dog chewed on my cable 2nd part of the video was great help.

Saved me $25! Thanks!!

Thank you!

"Best Guide Ever" that's 100% true! ;-)

THANKS FOR THE HELP

You saved me bro thank you very much

Thank you! It works.

Thanks for the second part❤️❤️

OK ! GOOD JOB ! MANY THANKS.

BIG THANKS MY FRIEND!

i thought you were going to re-use the terminal, you proved your point. 2nd pt *that's a nice little trick* i've used twist caps when combining 3 cables, didn't have a RJ45 Splitter plus was doing it on my own home and not a whole network. got internet excellent connection working. if data has been affected no one has noticed. all our devices are hard wired now, our wireless signal working beautifully

2nd part was very helpful

Yes best giude ever, i agree!

A nail went through the cable but it still works really well - not tempted to fix it this way - but it is certainly an option :)

I can confirm this works just need alot of patience

Very neat n clean work.

So after I used a 30m cable, I realized then it wasn't enough but after buying another 15m one I matched the wires together I get "ethernet cable disconnected". Is the the twisting of the wires really necessary?

2019 big helps

Is there any other instructions if I need to do this for a wire exposed to the outside?

Thank you so much

Thank u so much very easy and nice trick Mashallah