How did it go?

@@benchmarking6875 It was the M92T36

Great video and confidence

Will take hours tho mine is taking over 10 hours to charge cuz I haven’t played it since April- may

You don't have to do that using this method, the pads need to make a contact with the pads on the chip, and if you use the nudge test and it springs back it means surface tension has done its' job, which means the chip has been installed successfully

Hey mate. Great job, I've been there myself where I've really messed up the components around M92. Happens to the best of us lol. In terms of the meter though, if you have the same one as me make sure you're using it the right way round, I personally was connecting it backwards (input to the device, output to the brick 😂) which messes things up. But also those couplers do work, but only certain brands. Here's a link to the ones I used to have: amzn.to/3NqljX4 Personally though, I'd recommend just getting yourself a thunderbolt extension cable, which is what I use now: amzn.to/3ynvZlh Also, I recommend using either the original switch power brick or something that supports USB-C PD (power delivery). Personally I use a uGreen 65w socket which works really well: amzn.to/3HUk2GF On top of that though, only certain ports on that socket work with the dock, I think it's port 2 because that can provide more current, but the plug along with the thunderbolt extension is what I'm personally using right now and it works absolutely perfectly

@@TheCod3r you know I thought it would hook up to the meter the other way around lol. Thanks for the links as well fella.

I worked on several, and I have the hunch they're disappointing because of how cheaply made they're. PCB board and everything. 8 times out 10 once they break they're not worth fixing.

did you solve?

@@juscelino2253 I had to send it off to nintendo to be repaired

It's a 0.1uF MLCC 0201 6v but it's honestly not needed. The console will work fine without it

@@TheCod3r you legend thanks , I did put a question on Facebook and someone said it wasn't needed but wanted to hear it from you.

@@TheCod3r do i need to bridge it if not replacing it ?

That just comes down to experience. The more you practice, the better you'll get 😀

Typically around £50 mate depending on the cause of the fault

@@TheCod3r can I still book on that website?

@kylerobinson292 yeah, you can book them in at www.consolefix.shop mate

Very likely either M92 or a bad charging port. Normally in that case I change both to be safe

@@TheCod3r Thank you, Because Im having second thought of replacing my m92 chip good thing you confirm it.

@@hellopo5218 you're welcome. Hopefully it fixes your issue

@@TheCod3r Thank you might Update you later

@@TheCod3r I successfully replace the m92 chip but the reading is still 5v 0a