How to fix a noisy tumble drier | rumbling tumble drier

No video

How to fix a noisy tumble drier | rumbling tumble drier

Рет қаралды 2,518

Күн бұрын

In this video I repair a Beko tumble drier, which became noisy all of a sudden and started making a rumbling noise. The tumble drier was also vibrating! This is not an easy fix, as it can be difficult creating enough room to get the guide wheel into position. The tumble drier guide wheels cost roughly £10 each.

Пікірлер: 44

@ultimatehandyman Ай бұрын

It’s another rainy day here in Darwen, the fallen tree has gone, and my other garage is nearly completed, hopefully I’ll be able to make videos on a more regular basis soon! I hope everyone has a great Sunday 😉

@jameshuss1828 29 күн бұрын

The second is safety. You always promote safety. And that is also good !. Thanks again sir

@jameshuss1828 29 күн бұрын

Hey I wanted to say thank you so much for your time and knowledge and helping everyone out by sharing it with us it makes a difference sir !. I watched a lot of your videos. Saved me a lot of money on the easy stuff. As for electric and plumbing that…….I hire it done.

@voip51 19 күн бұрын

Just completed the diagnosis and repair on my dryer based on this video. Thank you!

@ultimatehandyman 10 күн бұрын

I'm glad the video helped Thanks for the comment 👍

@singe81 Ай бұрын

Just watched the whole video even though my tumble dryer is fine! 😂

@ultimatehandyman Ай бұрын

Thanks for watching the video, I appreciate it 😉

@akbarsaleem6461 Ай бұрын

I don't even have a tumble dryer..😂

@akbarsaleem6461 Ай бұрын

And I watched the complete video

@johnstewart3244 Ай бұрын

I don't even have one!😂

@anthonys555 Ай бұрын

Same here and I don't have one either

@Pete.Ty1 Ай бұрын

👍👍👍 Another no nonsense straight to the point instructional video. Thank you

@ultimatehandyman 29 күн бұрын

You are welcome Thanks for the comment 👍

@Petertronic 19 күн бұрын

Useful video. My Bendix drier is about 18 years old so might need similar repairs soon

@ultimatehandyman 10 күн бұрын

Thanks for the comment 👍

@robertstorlind2302 Ай бұрын

The metal casing might have sharp edges, in my experience. Nice repair!

@ultimatehandyman 29 күн бұрын

👍

@michaelplays2449 Ай бұрын

Great repair !!

@ultimatehandyman 29 күн бұрын

Thanks 👍

@paulhammond7489 Ай бұрын

Not a fix I need at this time, but a good one for the memory bank in the future :) Cheers...

@ultimatehandyman 29 күн бұрын

Thanks for the comment 👍

@dadsinoz Ай бұрын

Hi Chez glad to hear your tree woes are getting to the right end now :D it doesn't impact the video but the audio is a bit out of sync the back half of the vid, just an fyi :)

@ultimatehandyman Ай бұрын

Yes, I forgot to mention the audio. I had several files selected on my SD card, which I transferred to my editing computer, so I hit delete, but instead of deleting the highlighted files, it deleted everything on the SD card 😱 I had to use some software to recover the files from the SD card, but the audio was no longer in synch. I have used the same SD card for over ten years, and some of the footage that was recovered from the SD card, was almost ten years old (but only fragmented bits of video) Thanks for the comment 👍

@richardstaz721 Ай бұрын

Any Beko appliance can be quickly fixed with a trip to a recycling centre.

@ultimatehandyman 29 күн бұрын

😂

@tonymannion5743 Ай бұрын

Would there be any possibility of drilling a hole in the back of the machine to gain access to the back of the wheel bolt? Maybe then it would just be a case of unbolting the wheel? Less faffing and harder to cause personal harm / damage to other plastic components?

@ultimatehandyman 29 күн бұрын

No, the drum support rollers are at the front of the machine. That reminds me of a guy that I know though- he phoned the local appliance repair shop for a price to replace a washing machine bearing (big job), he was quoted £80 He thought that was expensive, so cut some of the rear panel away using his angle grinder, the then realised that he still could not get the bearing out, and ended up taking it to the shop anyway- I hope they charged £100 😂 Thanks for the comment 👍

@mikedolman7056 Ай бұрын

Um were you just lucky to strip out side you replaced the roller on or could you tell by where noise was coming from, Somerset mike.

@ultimatehandyman 29 күн бұрын

Hi Mike, yes, it was pure luck! Thanks for the comment 👍

@timtam6442 Ай бұрын

Can you fix noisey kids?

@ultimatehandyman 29 күн бұрын

No, I have two of those myself 😂

@SuperWayneyb Ай бұрын

🤘😎🤘

@ultimatehandyman 29 күн бұрын

👍

@hoog111 Ай бұрын

You made that look hard lol. Could have used cabinet jack clamps.

@ultimatehandyman 29 күн бұрын

It was hard, I always try and show how difficult a job is during the video. I could of course have edited a lot out and showed the roller being replaced easily- but real world videos are better IMHO Thanks for the comment 👍

@nickayivor8432 Ай бұрын

👍 WHIP SMART,Ultimate Handyman Take care,enjoy your Sunday,Ultimate Handyman From Nick Ayivor from London England UK 🇬🇧 09:27AM Good Morning 🙏 🌄 the 🌞 is out 🌞

@ultimatehandyman Ай бұрын

Thanks Nick, I hope you and your family have a great day 👍

@BatBrakesBones Ай бұрын

These are difficult

@ultimatehandyman Ай бұрын

Yes, they are a real PITA. I often work on difficult to maintain machines! These rollers could be designed, so that they could be replaced much easier and faster- but I guess they make everything to be cheap- rather than easy to fix. Thanks for the comment 👍

@lazylad8544 Ай бұрын

I think if my dryer was ten years old id buy a new one. Its no wonder its broke some woman has been kissing the front of it. You did a good job repairing it but at ten years old its time for a new one. They're not expensive.

@ultimatehandyman 29 күн бұрын

Yeah, I repaired this and gave it to a mate, I then bought a heat pump dryer which is A++ rated. I’m also using the dishwasher on the quick setting now- ironically my combined gas and electric bill has not gone down 🤔 Thanks for the comment 👍