HOW TO FIX A RUN OR SAG IN CLEAR COAT

Рет қаралды 20,829

Kandy Man

Жыл бұрын

Пікірлер: 77

@jpaul6624 Жыл бұрын

Thanks for making my wife’s boss’s car look better than pre-loss condition. I tried to find that run after you removed it and couldn’t. Nice job bro.

@kandyman5315 Жыл бұрын

It's what we do. Thanks for the support

@jerryvikla3925 2 ай бұрын

I have been trying various brands of clear and base over the past 3 years and have got quite a few sags and runs in the clear. For me poor lighting is a huge factor in getting them. Your comment that you would rather push the clear and get a run than have a dry job is spot on and quite reassuring to a guy who only paints maybe 2-3 cars a year. You are the best!

@dougderby9454 Жыл бұрын

I had painted an old car of mine. Single stage Centari. Metallic. Few runs. Friend who does nothing but buffs cars all day at a body shop. Buffed car for me. I had wet sanded car 1000-2000. Watching him razor the runs out and buff. Shows what thousands of hours of experience does. 😊. Excellent Kandy man.

@beemabuildbodystylingrepai1934 Жыл бұрын

Great work buddy getting them out like that saves a re do and time and money.i have used the polyester putty method a few times over the years and does work pretty good on bigger runs as you don’t rub down around the run just the run itself:) keep them coming buddy love the updates 👍👍

@scottherr642 Жыл бұрын

You are one of the best old time painters on KZfaq I consistently learn by watching you. I too use razor blades to shave runs but going 90° to the sag I've never done...makes me want to run one to try it. I am using the mirka tungsten blade as well now works very well and never digs in. Great video and channel.

@kandyman5315 Жыл бұрын

Thank you

@robertwalter6688 Жыл бұрын

Iam a paint stick guy myself the razor blade is good but I get the best results with 3m 800 wet dry on that little piece of wood good job kandy man well done!!!!!

@DC-ep3bd 10 ай бұрын

Fantastic video, thank you for putting this together. I have a clear coat sag on my golf cart body, I will use this method to resolve it.

@rtcar6990 4 ай бұрын

Thanks for vid. New learning is the pre sand so it helps bring out the run definition. I have a similar run in a door I just did so watching lots of vids. First one I’ll try to remove so thanks for your guidance. Confidence I can do this boost for sure.

@michaeljohnson5108 Жыл бұрын

Great video. Very well explained. Thanks!!!

@ThreenaddiesRexMegistus 9 ай бұрын

That Alfa Romeo looks fantastic. Great job! And thanks for sharing this - I’m using it shortly. 👍🏻

@ThreenaddiesRexMegistus 9 ай бұрын

Might be a silly question, but what is that wonderful red? The colour hue is exactly what I’m looking for for a motorcycle I’m doing. It’s also exactly right for an Alfa. 👍🏻

@PrevostNewbie 8 ай бұрын

Your Videos are very informative with no personal attitude like some other paint/body work content creators. Thank you for all you do.

@kandyman5315 8 ай бұрын

Thanks for the feedback

@a4b7ga Жыл бұрын

Crazy. Love the detail and owning the error

@robertcharlton1551 10 ай бұрын

Good teaching ! Thank you.

@dustinbigenho940 Ай бұрын

Thanks for video Great job Very well done and informative

@deanbrown7643 Жыл бұрын

We all get them mukka were not robots well explained brother keep it wet that's the trick 👏👏👏

@YootubeUK 9 ай бұрын

Very nice job! I just got runs in clear that make me want to sell every paintgun I own! Nice tip taking the edge off the corners of the blade. :)

@kandyman5315 9 ай бұрын

Glad I could help!

@glen4407 Жыл бұрын

Good job. Since I use cheap clears it can be a challenge to get it hard enough. I put the bake light on it a few times. The putty method can map where it was and have to polish it again. It could just be on the clear.

@dredfxcustompaint Жыл бұрын

Had a sag last week pushing the clear to its limits 😤 great video k man 👍

@kandyman5315 Жыл бұрын

💪💪💪💪

@DJRandolf12 Жыл бұрын

Hello thank you for the tip I've never tried a razor blade before.i know other painters who do this. If I ever get a run I use a old piece of a body file works well for me been doing it for years.

@kandyman5315 Жыл бұрын

Thanks for watching and commenting 👍

@mikoajkopernik7664 Жыл бұрын

Nice 😃👍

@jraposo911 Жыл бұрын

Nice 👍

@ANDY-we7mr 3 ай бұрын

Hi kandy man 👨 brilliant video thanks for sharing that i painted my ford focus mk3 front bumper the other day with base coat paint only used it a couple of times got a little run in the clear coat paint got a stanley blade and some wet and dry paper ready to cut and buff with 15000 grit and 2000 grit 3000 grit and polish

@kandyman5315 3 ай бұрын

👌

@ANDY-we7mr 3 ай бұрын

@@kandyman5315 HI GOT MY CAR BUMPER PAINTED AND ITS STILL NOT THE CORRECT MATCH THEN THE PAINT SUPPLIER MIXED UP SOME MORE AND USED A SPECTRO CAMERA ON THE CAR AND ITS A LITTLE DARKER THIS PAINTER SAID ANDY NEEDS A BLEND ON THE WINGS

@kandyman5315 3 ай бұрын

👍

@ANDY-we7mr 3 ай бұрын

@@kandyman5315 what would you recommend please scuff the wings with 600 grit DA sander and clear base coat blender and base coat paint and clear coat paint never done a blend before

@kandyman5315 3 ай бұрын

@ANDY-we7mr 800 grit .gray scuff pad clear base whole panel .then put on color blend it out then clear it💪

@joshuavallot8921 Жыл бұрын

I've cut runs with a razor blade before, and I have had the edge dig in a little more then I wanted as well, but I never though about sanding the edges off!

@kandyman5315 Жыл бұрын

👍

@wildeyednorthernboy2326 3 ай бұрын

nice job,thankz for the info sir

@kandyman5315 3 ай бұрын

👍

@setthehook4me 10 ай бұрын

Thanks for the great content

@kandyman5315 10 ай бұрын

My pleasure!

@hhaste 11 ай бұрын

Got a new sub from me!

@steveguest8028 11 ай бұрын

Great video 👍

@kandyman5315 11 ай бұрын

Thanks for the visit

@cynt1111 Жыл бұрын

That’s my method, works great.

@nealnaz Жыл бұрын

I enjoy watching you. and am learning a lot. On a different topic of confusion for me...are the 3M PPS gun adapters specific for use on either a PPS Original or a PPS 2.0 cup and cap? Meaning I would hate to have to purchase both The Original and the PPS 2.0 cups and caps. Thank you.

@kandyman5315 Жыл бұрын

2.0 is the newest version you can go with either

@nealnaz Жыл бұрын

@@kandyman5315 after asking you, I did a live chat with 3M. Was told from company rep that the PPS 2.0 kits should be less expensive. I also learned the difference in appearance of both adapters. ORIGINAL has a flat adapter surface and 2.0 has sort of wings and a small funnel shape. The Original cup has 2 clips to hold the adapter and 2.0 has 4 points to clasp cup. Unfortunately, before realizing the two are NOT interchangeable, or that there was any difference, I ordered adapters that are only for Original PPS. The company no longer makes Original PPS adapters and those don't have the "S" in the name. For the Kiwami4, I was told the #43 is the Original PPS Adapter and the #S43 is the 2.0 Adapter. Hope that info helps someone else out.

@cruise_captain Жыл бұрын

first of all he is not an old time painter, i am an old time painter, go to h.d. and get a flat fine 1/2 inch wide cut it down to 3 inch bevel the edges and epoxy to a piece of wood, works great. on really big runs an old time metal file works wonders. I actually did that once on a cadillac door, it worked but had to respray as it was too slick. got to keep the orange peel even

@genuinejake9851 Жыл бұрын

can you give a recommendation for a nice quality clearcoat? Finishing up a resto on my c10. lots of hours in it so i don't want to cheap out but dont really to spend above and beyond necessary. Color is gm wildcherry tintcoat. Ive already bought base and midcoat.(ppg shopline plus) I have ppg and axalta dealers nearby but Im willing to shop online too. Thanks in advance

@kandyman5315 Жыл бұрын

I love cc 200 by Sherwin Williams or 8152 by ppg they are not cheap but worth it to me

@marcuswhite1403 Жыл бұрын

I normally use the spot putty method. I've always been scared to do it with a razor. I also use the Perfect It 3 step process. Really good stuff, just expensive

@kandyman5315 Жыл бұрын

👍thanks for the support and feedback

@marcuswhite1403 Жыл бұрын

@@kandyman5315 No problem. I enjoy watching your channel

@icarusdb58 Жыл бұрын

yt need to paying more to professionals , who actually produce and teach quality results 👍

@oopspaint Жыл бұрын

Hell yeah, we all make mistakes, we are human, but killer save! Life is learning. I learn daily from guys like yourself and others. I surely don’t know it all, and learning the little tricks, makes the work life easier!

@scootherring9314 Жыл бұрын

Non razor blades for me but I do have same file So I file them an dry block with 800 grit water block 1200 an buff wool pad yellow bottle compound then switch to black and black foam and blue sometimes

@kandyman5315 Жыл бұрын

Thanks for sharing your technique 👊

@Supanova70 5 ай бұрын

Yellow tape on both side of blade to hold also leaves a small air gap not to dig in by mistake.

@kandyman5315 5 ай бұрын

👍👍

@user-pl5cz3sp2s 2 ай бұрын

What was the first buffing wheel you used on the mini buffer

@kandyman5315 2 ай бұрын

Yellow or white first step foam

@edisonlima550 Жыл бұрын

Dica muito útil, valeu amigo

@kandyman5315 Жыл бұрын

👍

@stephenherrick6847 Жыл бұрын

What kind of gun do you use for base coat and what kind do you use for clear coat?

@kandyman5315 Жыл бұрын

3m performance gun for base clear iwata and dv1

@stephenherrick6847 Жыл бұрын

@@kandyman5315 Hey maestro may I ask where the DB8150 clear can be purchased and does it work for air dry? Keep the videos coming

@kandyman5315 Жыл бұрын

Ppg store

@Guest-at-the-Asylum Жыл бұрын

How many coats of clear are on the car?

@kandyman5315 Жыл бұрын

Two coats

@cjtsn466 4 ай бұрын

Isn’t it best to repaint it.The orange peel will not match .They removed a run on my door now part of the door is too shiny

@kandyman5315 4 ай бұрын

Removed right and blended in will look good

@jimmycocks Жыл бұрын

Nice. New to your channel. Been doing this shit a long time and always looking to learn. I do a similar technique with a file or even a small stone. Hate runs, the worst is when it happens friday pm- wrecks my weekend.

@kandyman5315 Жыл бұрын

Appreciate the support

@jimmycocks Жыл бұрын

@@kandyman5315 you got it,hope u keep it up, enjoying going thru your catalog of videos