How to Fix a Samsung Dryer Squeaking, Making Noise, or Grinding

Рет қаралды 262,042

Күн бұрын

If you own a Samsung dryer that is making strange noises, its very important that you fix it before it gets much worse, because your dryer can end up having a failure that results in the Samsung dryer not starting, or won't turn on.
In this video, I will show you the 4 most common parts that fail - the Samsung Dryer Idler Pulley, the Samsung Dryer Roller Wheels, and the Samsung Dryer blower assembly, which are almost always the issues, as well as a few minor issues, too. You'll find out how exactly to do a Samsung Dryer Roller Replacement, too.
This video is the 2nd of a 4-part set of videos on Samsung Front Load Dryer repair videos. I spent 2 days tearing this unit apart, and filming all the typical errors you'd find on such a unit.
Dryer Roller Kit + Idler Pulley and Belt: bit.ly/3eHcTw3
Samsung Dryer Motor: bit.ly/3lwh5CA
Video Timeline:
Intro: 00:00
Disassembly of Dryer: 00:32
Samsung Dryer Components & Inspection: 03:48
Samsung Roller Replacement: 05:23
Drum Inspection: 08:13
Samsung Dryer Re-Assembly: 08:33
Like or Hate the Hat? Buy the Hat! bit.ly/3dtHHjE (The hat is NOT an endorsement of any candidate, party, or ideology. I am just a big fan of parody)
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Пікірлер: 221

@bensappliancesandjunk 2 жыл бұрын

If you have a Samsung Dryer and need parts like the drum roller kit, you can support us by buying here: Dryer Roller Kit + Idler Pulley and Belt: bit.ly/3eHcTw3 Samsung Dryer Motor: bit.ly/3lwh5CA

@nmckinlay 2 жыл бұрын

Any idea how long it takes to ship to Canada? Are these OEM parts? Thanks!

@bensappliancesandjunk 2 жыл бұрын

@@nmckinlay 5-7 days for UPS, 10-15 for economy. They are ERP brand which almost is always from the OEM factory or better, when possible. The original Samsung heating elements are from China, these are North American. The rollers from Samsung usually are Chinese, and these are Taiwanese... My experience is they are either at OEM quality or above it, even. I have yet to have a single problem with using them in our store, or selling them to customers.

@robertfontaine3650 Жыл бұрын

You rock :) - order wheels and idler pully off your site. LIke everyone else, If I'm gonna tear it down and clean it I may as well replace the wear parts. You might want to add the belt to your kit as well. Amazon is always cheaper but you video is worth the price difference this time. Thanks. Cheaper than calling for a tech.

@robertfontaine3650 Жыл бұрын

Man am I ever sorry I ordered from you.... UPS charges to clear customer $41.72 to Canada. Almost as much as the price of your kit. Wow! Much fukt!

@bookerrogers7813 Жыл бұрын

Qpp

@yvonnesamaniego8114 11 ай бұрын

At first I was overwhelmed and almost bought a brand new washer and dryer. It'll be 2 weeks before they can deliver so I threw caution to the wind and started following your instructions. Voila! I found the problem, did a temporary fix till my parts come in. Thanks for that link, btw! My husband passed away a few months ago so you are just what I needed.

@joshuahoy-burbank8298 Жыл бұрын

Dudes like, "here's how to 'potentially' fix a squeeking issue. Check out these parts" proceeds to teach us how to build our own dryer from scratch.

@zcar Жыл бұрын

Haha! This!

@marioperera75 Жыл бұрын

😆 made my day

@davekachavos1342 Жыл бұрын

And your point? I actually needed this video. Why were you watching it? 🤷🏼‍♂️

@josephkilleen7807 Жыл бұрын

Yep, $35 and two hours later my dryer purrs like a kitten!

@dracovolans319 Жыл бұрын

@@davekachavos1342 I'm pretty sure Joshua's comment's point was "humor." Humor is something that many people enjoy. I don't think he was trying to disparage the Ben's video. If anything I saw it as a compliment to Ben's thoroughness in his video. Lighten up and look for good in the world! Great vid Ben!

@Gotsqueeze2345 7 ай бұрын

Hell yea! Straight to the point,Good camera angles and fluent english. Only thing i would add is a few sound clips of each problem/issue.

@philipgarza3619 Жыл бұрын

Great video and awesome explanations. I successfully replaced the tensioner, belt, and bearings. Turned out one of the bearings was damaged. Thanks for taking the time to make this tutorial!

@heathergranneman804 10 ай бұрын

Thank you so so much for making this video! We moved into a new house and the dryer was making a horrendous noise. After a bit of googling we came across this video and successfully changed out a roller!!!! We have no experience in mechanics and are very proud of ourselves lol. Thank you so much!

@skeletor2232 Жыл бұрын

Honestly can't thank you enough, video was straight forward easy to follow. Was able to fix 2 issues with my dryer thanks to you. Kudos 👍

@gavinsullivan2253 5 ай бұрын

I’ve watched multiple videos and this one is the only one that shows exactly how to make the repair. Plus I ordered all the parts for under $60 from Ben’ Appliances. Samsung sells each part for $60 each. I saved so much money!

@davekachavos1342 Жыл бұрын

Thank you for this great video! It was well explained and I was able to find my roller in the back completely disintegrated. I ordered a complete replacement kit including idler and belt. Figured I was in there anyway. Again, thank you. I also have done a few appliance videos to help others.

@monicaswadley504 Жыл бұрын

My back rollers are shredded so I’m going to replace those. I took apart my dryer with your step by step video and appreciate how thorough you were! I sliced my arm on something and forgot to plug back in the door clip so it threw a code for that but was able to easily go back through the steps and find it. I might just start fixing dryers as a side hustle lol

@davidly2025 Жыл бұрын

Thanks for the video! I had a technician show up for $90 and take apart my Samsung dryer. He then asked for another $230 for the parts and $200 for labour! I told him to get lost. I bought the bearing/pulley kit for $50 on Amazon and did it myself in about 60 minutes thanks to you!

@paulvuphotography 2 ай бұрын

Was your pulley bearing pretty tight compared to the other rollers?

@DreadRoberts12 Жыл бұрын

Great video! Thank you so much! You’re the hero we need, not the one we deserve.

@patrickmcgrath6338 Жыл бұрын

Worked like a charm!! My tension wheel had seized and belt grinded right throught it. Also had a bad roller. Replaced everything. Quiet as every. Thank you

@blaineose8928 Жыл бұрын

This video was very helpful even with the quick reassemble. The only thing that would make it complete is slowing it down when the belt was put back on so you could get a better view of how it's setup. All in all I would highly recommend watching it if you need to fix anything related to your belt assembly.

@ChrisWeadick Жыл бұрын

thank-you sir for sharing your knowledge and experience. While watching this video the noise went away LOL... I know that is only temporary and it will get worse... but now I feel a little more comfortable having a look at it. I always am amazed how much lint is inside these machines... almost need a way to click a couple of buttons for it to flip up so you could vacuum all the internals without taking it apart LOL. I appreciate your honesty and your support. Wish you were closer!!! will give it a shot... thank-you.

@josephkilleen7807 Жыл бұрын

Honestly one of the BEST vids I've seen on YT! Perfectly thorough!

@bradknipp2388 2 жыл бұрын

This video was perfect. Saved me a service call. All I needed was to clean out the lint. Thanks!

@harrisonlauraj Жыл бұрын

My friend you saved me a boat load of money. Was able to determine one of the back roller wheels was broken after watching your video. Fully thought I was going to have to buy a new dryer. Also made about $2 in change with all the money found in the bottom of the machine :D

@user-zb9pt6hd7c 9 ай бұрын

Thoughtfully fast but thorough descriptions and video help - which I know takes planning and extra shooting & editing effort so thank you. Hopefully other content providers adopt your style.

@willspiller8330 7 ай бұрын

100%. Thorough as to not leave out anything, but unlike 95% of the videos out there, he doesn’t take 30 minutes explaining unnecessary crap before he gets to the “meat and potatoes”. Great job

@sandtownmob 2 жыл бұрын

Much appreciated. Great instructional video; very easy to follow along. Thanks again.

@christmasjamofutah3400 5 ай бұрын

Outstanding step by step! Bought the kit and got my dryer back to Silent running!

@mikedelaney7053 Жыл бұрын

This is a really wonderful video. Metal on metal was destroying my sanity. No rare earth magnets for the kids anymore. Appreciate your knowledge and insights!

@mrprfct7069 6 ай бұрын

Thanks for the video. I just fixed our 7yr old Samsung dryer. In my case the squeaking was coming from the front lower wheel but I replaced all of them along with the pulley and belt. Nice to see all the components of a dryer for future reference. Should be easy to fix. FYI. I didn’t have to remove the back panel to replace the wheels. I was able to squeeze an open end wrench back there.

@13rrich Жыл бұрын

Thanks for posting video. Just completed this repair following your instructions. Save me from an expensive repair.

@williamj3459 8 ай бұрын

Worked like a charm for me. The back right roller wheel was frozen on mine. It seems to be the most load bearing of the four roller wheels. Thanks very much for posting this video!

@shivasorion2014 Жыл бұрын

Dear Ben....Thank You...Thank You...Thank You for your easy going, kind and detailed repair video. You just saved me from buying a new dryer...!

@jasonbarnes8122 2 ай бұрын

Super helpful! Thank you! Instructions were detailed and clear. Your voice is also very pleasant and calming to listen to while working. 😁

@zowtiak 2 жыл бұрын

Thank you, thank you, thank you. My dryer starting clunking. I called the local repair guys who said that it would be 3 days until they could come. I’m cool with that. My neighbor also has a stacked set, and told me it added $150 and a week ( needs 2 guys to be free to get drum out) to get a diagnosis. Thanks to your video I attacked it myself. Total time to replace pulley and clean out dryer was 1.5 hours. Saved me $500. I owe you a beer!!

@B.Miranda94 2 жыл бұрын

Wow that is so BS! Mine is stacked as well but I was able to take everything apart without lowering the dryer. I almost hired someone but ended spending about $35 and some time which probably saved me a couple hundred. Crazy!

@matthewsmithlee Жыл бұрын

Thank you for this video. Helped me diagnose our issue. Ordered the parts off your site! Excellent work!

@shenanigansIRA 9 ай бұрын

Thank you. The wife’s dryer grenaded the tensioner pulley. Disassembled it, $14 in parts and then reassembly. You are the man

@MightySapphire 10 ай бұрын

Awesome video, thank you! One of the bearings to a roller wheel had blown out on my dryer. I did a full kit replacement since I had already disassembled the dryer. I was also able to give it a good cleaning. Good as new for only the cost of a kit and one hour of time!

@djtall3090 9 ай бұрын

My wheel bearing was completely destroyed too.

@engelneen1686 20 күн бұрын

Thank you so much for this video! you really helped us. We are on a budget and people like you are so appreciated.

@marinopacentrilli9533 Жыл бұрын

Thanks for all your efforts. I bought a new tensioner the old one failed and seems to be a week point. Not a bad job but took me a couple of hours and needed an extra set of hands for ten minutes to reinstall the drum and yes there is lint everywhere have a vacuum handy. Again thanks for your video it really helped.

@pasirois 3 ай бұрын

Thank you SO much for posting this video. Extremely helpful, and saved me a lot of money!

@joealimond1685 2 жыл бұрын

Thank you so much. Great demonstration. Easy steps to follow.

@timl9495 7 ай бұрын

Awesome video tutorial! Just what I needed to fix my dryer. It was the rollers on mine that went bad. Also thanks for the link. You saved me $170 from purchasing from other online parts houses.

@shockwave538 2 жыл бұрын

Well done video. Have a squeal in my 9 year old Whirlpool that I suspect is the idler, but now I may order rollers as well. Not identical arrangement, but close enough to figure out. ** Thanks for stressing the importance of cleaning, that's exactly how to prevent fires aside from clean lint traps. Pull the cover and vacuum every 2-3 years ideally.

@bensappliancesandjunk 2 жыл бұрын

As soon as my new repair room is done I'll be shooting the same ideas for Whirlpool/Maytag dryers. Got a NASTY Kenmore (really WP Built) that had the rear bulkhead that holds the drum shred itself in half... Horrible thing... All caused by a $10 roller wheel. Quite literally, every dryer I've seen has a nearly-similar arrangement. 2-4 roller wheels. Idler pulley which anymore wear down fast. Some like GE/Frigidaire have drum bearings and wear pads that can go bad, but its almost the same identification system: If you have a noise, the drum will shred soon.

@spenson89 Жыл бұрын

Used your video to fix my dryer whose idler pulley had broken and was causing it to make a horrible squealing noise. Thanks for the great video!

@toomuch2love Жыл бұрын

This was my issue too. I just opened my dryer. The plastic part of my idler pulley melted off.

@ibrocn 3 ай бұрын

I just used this video to fix my Samsung dryer. Great video editing. That made it easy to follow along.

@djtall3090 9 ай бұрын

Thanks, Man! I did it with your help! My model was a bit different but more or less the same. As i removed the screws i placed them in a plastic sandwhich bag with a sticky note where they came from. Also, be careful not to bend any of the sheet metal if possible, since affect lining up the screw holes when you put it back together. Thanks Again Man!!!

@Mrkuppy50 6 ай бұрын

Nice job Ben, thanks for taking the time for us DIYer's

@waynekibbler2710 5 ай бұрын

Hey Ben, thank you for this one, perfect instructions to get my 12 year old Samsung dryer fixed up today. One bearing was totally wallowed out. Cheers

@7425398 Жыл бұрын

This was extremely helpful mine was a faulty roller, I think your vid just saves me over 200$

@If_Only_I_Knew_Why 2 жыл бұрын

You forgot to mention something! If the drum rollers fail within a year of being replaced, it's likely the felt seal on the drum is too worn and needs to be replaced. Dirt is able to get past it and ruin the rollers. The hardest part was finding a felt seal that would work. I used a felt seal meant for an LG dryer in my samsung dryer and it worked just fine. The process of removing, cleaning and installing the new seal was pretty straightforward and it's lasted close to 4 years so far without needing further repairs. I'm not an appliance repairman myself, but I still have a Samsung front load dryer like this one from 2008. When the motor finally gives out, it'll be time for a speed queen.

@chadellis5952 5 ай бұрын

Awesome video. Had mine fixed in no time. Thanks for posting.

@edbam6344 Жыл бұрын

Thank you so much for this video! Took mine apart following your steps and found a torn up baby sock in the plastic blower fan.

@overthemill 2 жыл бұрын

Thank you for making this. Helping me to diagnose an issue with my dryer.

@bensappliancesandjunk 2 жыл бұрын

Glad to help

@bradg0620 3 ай бұрын

This is great! Well done!

@user-uy1um8ne9o 4 ай бұрын

Millions of thanks to you bro

@ingredients710 Жыл бұрын

Excellent redux of this device.

@Whereyat504 Жыл бұрын

Really great instructional video, thanks!

@johnniemo Жыл бұрын

Perfect video. Fixed my squeaky Kenmore dryer with the kit from amazon. Thanks!

@rachellindemuth689 2 жыл бұрын

Great video. My Samsung dryer makes a rattling noise, but only on one setting. Tried other settings with similar heat/time and no rattling noise. Any ideas?

@trentanthony2662 8 ай бұрын

got me through a idle pulley and belt repair thank you!

@seahil 8 ай бұрын

You are the bomb!!! I did it myself thanks to you. Works great. Can’t thank you enough!!! 🎉

@tukkus2 2 жыл бұрын

Outstanding content. Keep em coming.

@bensappliancesandjunk 2 жыл бұрын

I'm trying to. I got 1 video left for my Samsung videos, then its on to LG dryers and then other brands/styles.

@BrooksHerring Жыл бұрын

Used this video to fix my Samsung dryer! Thanks Ben!

@kyle4673 5 ай бұрын

Brilliant video! I appreciate it, you saved me!

@ahmadmuti6862 Жыл бұрын

Great video thanks for helping us. God bless and merry Christmas.

@miltonnegron65 Жыл бұрын

Excellent video !!!

@AlliJohnston-wo7fz 8 ай бұрын

Thank you SO much for this video!!! Saved me from having to buy a new dryer.

@mr.ajcosta 10 ай бұрын

This was super helpful!

@chrisfast4469 2 жыл бұрын

Thank you so much for this!!! Ordered the idler off Amazon for $20 and replaced it within 30 minutes! Easy peasy! Also while I was in there, I hit all the bearings with some lithium grease and vacuumed out the dog hair and dust. Highly recommend these videos! Thank you again!

@paulettehancey5239 Жыл бұрын

Loved this video very helpful to get it taken apart and put together again, but dryer is having issues spinning the drum now? Any adea what could have gone wrong? I took it apart twice to see what could have gone wrong but I just can't tell!

@ealba3939 2 жыл бұрын

Thanks love the details

@royleecampbell8966 2 жыл бұрын

Exactly what I needed to know!!

@markkasprzak995 2 жыл бұрын

I have an Amana gas dryer that makes noise when the burner comes on. I’m confident enough now to take it apart and look for a problem. Thanks for the vid.

@bensappliancesandjunk 2 жыл бұрын

Nice! An Amana Dryer is going to be almost the same exact thing in terms of what to look for. Disassembly is different, but I think I have a video or two of Amana dryers coming apart. All the parts you need to look for are on the FRONT of the dryer like this rather than rear.

@darrenhall7990 2 жыл бұрын

Merica'

@francoamerican4632 2 жыл бұрын

@Darren Hall "Murca"

@Speido307 Жыл бұрын

Great video! thank you for sharing!

@davids55100 6 ай бұрын

Great Video. Thank you.

@Djoee05 Жыл бұрын

VERY helpful, thank you!

@ATGMotoring Жыл бұрын

Very good video!

@cdricl Жыл бұрын

You just saved me a few hundred dollars! Thank you good sir!

@yp7440 8 ай бұрын

Followed instructions and was able to fix the problem. Thanks!!!

@bensappliancesandjunk 8 ай бұрын

Nice!

@josephspellman2698 2 жыл бұрын

I bought the kit and it was Def a seized tensioner and belt was frayed. I replaced everything anyway since I was in there. Thanks for your vid!

@bensappliancesandjunk 2 жыл бұрын

Great to hear!

@alexanderbrito7427 Жыл бұрын

Thank you! Saved us $300

@dallassoonias5287 11 ай бұрын

Dude. Thank you so much.

@PiTaReX 10 ай бұрын

Good video but you can replace the rear wheels without removing the rear panel. Much easier. And I replaced mine while stacked

@vforba Жыл бұрын

Do you have any tips when putting the dryer back together? I felt like it was difficult to keep the dryer up on the wheels while trying to get the front bulkhead reattached.

@willspiller8330 7 ай бұрын

Hey Ben, I’m curious if you recommend lubricating the rollers (or anything else) with WD-40, white lithium grease, or any other lubricant OR if you actually do NOT recommend doing so? (Bonus question: I have a matching Samsung washer with no cleanable filter trap. We have many dogs, and I swear our washer redistributes hair (and what seems like fibers) into future loads. Might you have a video addressing best way to try to remedy this?) Thanks for an informative, clear, and excellently summarized video!

@masoudmontazery907 Жыл бұрын

Good luck sir 🎉

@B.Miranda94 2 жыл бұрын

Just wanted to say thank you for this tear down video. Much appreciated. Cost me $35 for a “upgrade kit” off Amazon and some time which saved me hundreds in the end. Thanks a bunch!

@NinjaNess5252 Жыл бұрын

What was the name of the kit? What came in it?

@user-uy1um8ne9o 4 ай бұрын

I can’t imagine how thanked for you

@Thomas-sv6jr Жыл бұрын

We have a squealing Speedqueen dryer at work. Sounds like a bad belt or bad bearing if they have those. I don't see any videos on Speedqueen are they fairly easy to work on? Are they worth the money for home use? (I am building a house myself and debating appliances. The ones at the firestation where I work seem to hold up to heavy use well, minus the recent squealing dryer.)

@nestordimailig2303 2 жыл бұрын

Thank you very much!

@jm-ve8ry Жыл бұрын

Excellent

@ingredients710 Жыл бұрын

Thanks!

@paulvuphotography 2 ай бұрын

Is the bearing on the tensioner pulley suppose to feel more tight or just as loose as the other rollers?? I have a noise I’m looking for can’t seem to find it, but it wasn’t a repetitive noise or squeak that something a belt or roller would do.

@lex4770 11 ай бұрын

Hello. Have a question. We just moved yo a different state and my dryer was working quiet. After deliveey its very noisy. Could of it been bended or crooked during transport to start making noise?

@zolomarze683 9 ай бұрын

Best video ever... i think i can open a business.. exelent.

@bensappliancesandjunk 9 ай бұрын

Yes you can!

@krystenreid8106 5 ай бұрын

Thank you so much. This let me fix my dryer that sounded like a dying rabbit whenever it ran.

@Onemattressatatime 2 жыл бұрын

Good video thank you for sharing

@bensappliancesandjunk 2 жыл бұрын

Thank you too

@mr.ajcosta 9 ай бұрын

So we did this and replaced the heating element at the same time with your kit. Is there something we missed that would make the dryer stop heating after these replacements?

@softwaretutorials3559 11 ай бұрын

My dry was getting worse and worse on making noise and squeaks. Took it a park just like this video said. Everything looked good. But just put some wd40 then white lightening. Back together and bam. Perfect thank you sir

@panamaservices1234 2 жыл бұрын

Hi Ben. These are very good instruction videos. I have been watching Brandon's videos for just over a year and decided to check yours out as well. I'm glad I did as now I i feel i can sell second hand white good in my area as a side Hussle. I live in New South Wales, Australia and i am hoping most stuff shown in these videos i can replicate here to make a bit extra on the side. Anyway buddy keep up the good work. I'm sure we are all looking forward to more videos.

@bensappliancesandjunk 2 жыл бұрын

Machines in NSW are identical to American machines for most brands. You guys got LG and Samsung. I think the only main brand you have is Sampson that we don't have here, and probably way more Fisher & Paykel machines (they are in the US, but barely). There's a huge market for used machines in Australia, and I know a few guys that do the hustle there. ITs good money, and stuff like LG/Samsung are easy to work on.

@saroumath6041 Жыл бұрын

Do the blue and the red wire has to be at the same order before you take it off from the heating element? Cause before you removed the wire the Red power wire was on the top and when you go back to install it the Red power was on the bottom.

@Hamid_1368 2 жыл бұрын

It was great, dear colleague

@bensappliancesandjunk 2 жыл бұрын

Thanks!

@daniellegarcia8299 Жыл бұрын

Love these videos, Ben is so handsome ☺️

@bigbird4719 Жыл бұрын

New sub

@PaladinRevenant Жыл бұрын

Thank you very much for this video. I was able to get all the way through taking the dryer apart, cleaning it, replacing the parts, and putting it back together. This was so very helpful.