How to Fix Analog Stick Drift

How to Fix Analog Stick Drift - 3 Ways

Рет қаралды 413,245

3 жыл бұрын

www.jlcpcb.com $2 - 2 Layer 5PCB's, $5 - 4 Layer 5PCB's
How to Fix Analog Stick Drift - 3 Ways - In this video I'm showing you 3 different ways to fix analog stick drift. Option 1: Replace the analog stick. Option 2: Clean the potentiometer. Option 3: Replace the potentiometer. Depending on the problem, cleaning or replacing just the potentiometer won't always work but they can be great options to try first since they are easier than replacing the entire analog stick.
►Tools & Parts I Use (paid link): www.amazon.com/shop/tronicsfix
►TronicsFix Game Console Repair Forum: www.tronicsfixforum.com/
🎵 Like the Music? I use Epidemic Sound (paid link): share.epidemicsound.com/tronic...
SUBSCRIBE: / @tronicsfix
-----------------------------------------------------------------------------------------------------------
Instagram / tronicsfix
Facebook / tronicsfix
Twitter / tronicsfix
Website www.tronicsfix.com/
-----------------------------------------------------------------------------------------------------------
Tools I Use:
-Protech Toolkit: Amazon (paid link) geni.us/90il5y
-Torx Security T8: Amazon (paid link) geni.us/AEcBvZL
-PH00 Phillips: Amazon (paid link) geni.us/YGVSSv
-Tweezer Set: Amazon (paid link) geni.us/t0VrlcX
-Electric Screwdriver: Amazon (paid link) geni.us/2wbHzJ
-Thermal Paste: Amazon (paid link) geni.us/q2Prd
-Canned Air: Amazon (paid link) geni.us/CPYy
Equipment Used:
-Hakko Hot Air Station: Amazon (paid link) geni.us/y2JDR
-Nozzle for hot air station: Amazon (paid link) geni.us/zpEWlT
-Hakko Soldering Station: Amazon (paid link) geni.us/MTL0qb
-Hakko Air Filter: Amazon (paid link) geni.us/Gqznh
-Microscope: Amazon (paid link) geni.us/WBO3b
-Kester Solder: Amazon (paid link) geni.us/ETXUh
→Business Inquiries Email: steve@tronicsfix.com
TronicsFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this KZfaq channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TronicsFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not TronicsFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
(*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
The music used in this video does not require attribution.
About This Video:

Пікірлер: 845

@Tronicsfix 3 жыл бұрын

Which method have you tried? Get your PCB's manufactured here: www.jlcpcb.com $2 - 2 Layer 5PCB's, $5 - 4 Layer 5PCB's

@bl00dless19 3 жыл бұрын

My controller right stick goes left if i pushed my left stick forward

@jakermeister269 3 жыл бұрын

I have tried the cleaning method without success in the past. PS where do you get your replacement joysticks? and are they as good or better than the originals?

@chlero_eyes 3 жыл бұрын

But where do we buy the parts??

@foxrcn 3 жыл бұрын

where is the best place of places to get genuine alps analog replacement for ps3,, ps4 xbox etc , there's china copy's of alps ones on lots of sites but don't work very well or have less steps in range each direction or short life span ,, so is there a good place to get genuine alps ones and how to identify the right ones for ps3 / ps4 / xbox and some times ps3 ps4 used different alps analog stick for different models of ps3 ps4 controllers ?

@retroboyone3577 3 жыл бұрын

Btw I love old big wallets 😆

@Riktoo 3 жыл бұрын

IDK why it's called joystick When it gives you anxiety.

@adamhernandez1591 3 жыл бұрын

It's called analog stick

@FoulGlizzy 3 жыл бұрын

When u spell richtofen wrong

@Riktoo 3 жыл бұрын

@@FoulGlizzy when you can't read my name right.

@rngflmezz8614 3 жыл бұрын

@@Riktoo when your pee

@Riktoo 3 жыл бұрын

@@rngflmezz8614 on your hands

@asmodeusml 3 жыл бұрын

Nice one, Steve! Thanks a lot for doing this video as not many people know that you do not have to replace the stick itself and can do with very simple repair quite often.

@enthusiasticbanana6232 2 жыл бұрын

HUGE TIP - For replacing a potentiometor, if you pry it away from the main assembly (like you would to clean it) and bend it back and forth till it snaps off from the pins, that makes it so much easier because then you can just desolder each pin and pull them out one at a time. That way you don't even need a solder sucker or solder wick.

@steveaustin330 3 жыл бұрын

TronicsFix and LTT ,my two favorite channels.I learn so much from you,thank you!

@grumbirky 3 жыл бұрын

Good guide thank you! I cleaned mine which made a difference for a few months, but now the drift is back again. Appreciated you saying that this method doesn’t always work, makes me not feel as incompetent..!

@iAmAngotti 3 жыл бұрын

Ive learned so much from your page to be honest. Definitely has helped me with soldering at work 💯

@Tronicsfix 3 жыл бұрын

Love hearing this!

@iAmAngotti 3 жыл бұрын

@@Tronicsfix when I first started my job 2 years ago I was the first one in the store to learn how to solder & it was because id come home & watch your channel for hours 🤣 but its definitely helped me out alot & the content is great. I love you you talk about what to do & what not to do or that their are different ways to do something its definitely a great learning experience

@Tronicsfix 3 жыл бұрын

@@iAmAngotti Love it man. You probably already know but I do have online courses for soldering: www.gameconsolerepairschool.com

@virgildeklerk 3 жыл бұрын

Great video again Steve, thank you for diving into the whole analoge stick meganism and also the trick to only replace the potentiometer which is probably also a cheaper solution instead of replacing the whole analoge stick. Can't wait for the next video because they are always fun and educational. Keep up the good work and offcourse have a good one ;)

@Tronicsfix 3 жыл бұрын

It's much easier to just replace the potentiometer. Glad you're enjoying them!

@keithbrown37 3 жыл бұрын

Love this channel... I broke a lot of things trying to do what you do. So much respect to the skill.

@davidescobedo8772 Жыл бұрын

This is gold! I've replaced the whole analog stick many times... little did I realize you can take off the sensors and clean them. Since this video, I've since replaced the sensors from a new analog stick, without replacing the potentiometers and it seemed to work on one controller... But like everything, its a hit or miss, didn't work on another controller. Now instead of removing the whole analog stick, I'll just be replacing the potentiometers from now! Thanks!

@wokecults 2 жыл бұрын

Thank you so much for this video. One of the analog sticks in my controller was drifting vertically. I opened the potentiometer, cleaned it up following your instructions, and now it is working like a charm. And I used the right amount of thermal paste, as well. :-)

@MortyMore 3 жыл бұрын

You saved my evening Steve! Thanks for another quality upload 😊🔥. I never attempted to repair anything, but if i do, I take your videos as my help!

@Tronicsfix 3 жыл бұрын

You can do it! Glad you enjoy them either way!

@raddaks2039 3 жыл бұрын

Me about to skip through the sponsor segment: "Wait, what? OH THAT'S AWESOME!" I was debating what I'd do for this DIY project I'm planning (I'd need 2 of the only breadboards I have on hand), and JLCPCB looks a heck of a lot better. Kudos for getting an awesome sponsor. And also kudos for the video itself. I was just talking with some friends on discord about joystick drift with the Switch lol. Seems a lot of folks are replacing THE WHOLE PAIR OF JOYCONS when a joystick is drifting.

@makemoneynow5061 3 жыл бұрын

Officially, you're one of my favorite KZfaqrs out here!

@frankquiroz2747 3 жыл бұрын

As usual, you are the best. There's no better technician like you about all this gaming stuff. Amazing.

@Dorff_Meister 3 жыл бұрын

Thanks for stepping through the options and the great explanations. Happily I've not experienced this in my years of gaming. Fun as always.

@Damage9Jr Жыл бұрын

Thanks for the help. It worked on Wii U doing the cleaning method, just took the potentiometer out and sprayed isopropyl alcohol, brush teeth, put them all together again, and now it's working flawless.

3 жыл бұрын

Thanks Steve! My DualShock 4 is now working perfectly. I cleaned the potentiometers :)

@karbengo 3 жыл бұрын

This video helped me fix the stick drift on my Thrust YULA GTX540 PC controller. It had a guncked up potentiometer on the left analog stick, and the second method you showed worked perfectly. Thank you!

@alucard66692 3 жыл бұрын

2: Clean the potentiometer. Did the job for me. It feels so great. Thanks!

@sirleviatandoom 3 жыл бұрын

In this pandemic, you have saved my life, thank you very much, you are the best!

@pandepoo 3 жыл бұрын

I WAS WAITING FOR THIS VIDEO YOU TOLD ME IT WAS COMING. FINALLY!

@Tronicsfix 3 жыл бұрын

Ha, ha...I didn't lie!

@bryanbravo6217 3 жыл бұрын

i discovered your channel like a week ago and i've been watching a video or two every day

@Tronicsfix 3 жыл бұрын

Thanks for watching! Glad you're enjoying them.

@ShowYouHow_ 3 жыл бұрын

Let’s be honest, most of you won’t do all this just to fix it😂

@Tronicsfix 3 жыл бұрын

That's probably true, but some will.

@leandrofod 3 жыл бұрын

not gonna lie, if I had a rework station I'd give it a try. A whole new piece (analog stick) is very cheap and stores sell multiple units on 1 buy

@bobwallett 3 жыл бұрын

I tried but made mine worse. Sold on eBay and traded my Xbox controller for a new PS4 controller. Method 4?

@8-bitsteve500 3 жыл бұрын

I've replaced my Switch left joycon analogue stick twice because of drift. Cost of 2 replacement sticks - £7, cost of new joycons £65. Get stuffed Nintendo

@leandrofod 3 жыл бұрын

@@8-bitsteve500 it's not just nintendo, all brands do this. And i honestly think it's for the best. I agree controllers are just too expensive for their durability, but it's like an incentive for you to fix it yourself

@michellefernandez3155 3 жыл бұрын

Great video as always, really enjoyed the explanation. Kudos!

@Tronicsfix 3 жыл бұрын

Glad it was helpful!

@gamerhybrid5472 2 жыл бұрын

Thanks man, cleaning it was stressful but it worked. Thanks a lot. Subscribed 😊

@dr.doofenward1192 3 жыл бұрын

I have the tools and sticks to replace my joycons but I messed on one already, this was a good video as always

@Tronicsfix 3 жыл бұрын

Sometimes it takes some practice. Just keep trying!

@antonioledesma43 3 жыл бұрын

Bro by far the best video on how to fix your remote.

@amjadkhalawi589 3 жыл бұрын

thank you for this video! I have started just recently my little side hustle repairing controllers, it helped a lot!

@jaded_titan8204 2 жыл бұрын

Changing the potentiometer worked for me! Had an old 360 controller and all i had to do was switch out the potentiometers on my Series S with the ones on the 360. Imagine the little strips as a skull shape and the chin part goes at the bottom. This video saved me so much money!

@ExplicitPlay 3 жыл бұрын

I’ve been searching for a long time

@Tronicsfix 3 жыл бұрын

Hope this helps!

@LinkBlade24 3 жыл бұрын

I spilt milk in mine sadly and the left one is really bad everything else is somehow fine.

@ExplicitPlay 3 жыл бұрын

Michael Diederich If you don’t feel confident opening it up, get yourself a long soft clean paintbrush after a few rotations in the groove literally put your mouth over the stick and blow into it, then turn your controller upside down and tap the stuff out. Repeat process. But be gentle with the brushing.

@rayyanamir8560 3 жыл бұрын

@@Tronicsfix does the new potentiometer have full 360 degree support? Also is it legit?. How long does it last compared to a default stick of a controller?

@marsidruffy1320 3 жыл бұрын

@@rayyanamir8560 did you even watch the Video?

@indersandhu150 3 жыл бұрын

Don’t have any console but still love to watch ur videos 💜💜🤗

@Tronicsfix 3 жыл бұрын

So glad you still enjoy them!

@goxy287 2 жыл бұрын

Successfuly replaced both vertical potentiometers on both sticks, was harder the first time since controller was new and wasnt opened before. Second time I did it in like 15min. The vertical axis were jumping up and down before, now they're stable. It's slightly off center, someone mentioned in these comments each of these sensors is slightly differently calibrated, but I've got slight deadzones set up for that. Thanks for the helpful guide man :D

@dalelearn6049 Жыл бұрын

Been trying to fix the drift and stutter on mine for a good year now. I didnt know it was as simple as you showed to replace the thingies and not the whole stick, so thank you majorly for that. Been cleaning them just to get a little time of it not being so bad lol. Already had to replace two ribbons from taking it apart so much.

@omerahmed5503 3 жыл бұрын

I love ur vids and you have literally shown me that i am very keen in repairing and will study electrical engineering in the future. Thanks so much Steve! Much love to you and your family

@Tronicsfix 3 жыл бұрын

Glad you're enjoying them!

@omerahmed5503 3 жыл бұрын

@@Tronicsfix oh my god i didnt know you would reply, no problem and i hope the content keeps improving!

@Tronicsfix 3 жыл бұрын

@@omerahmed5503 I try to hang out for an hour or so after vids go live to interact in the comment section.

@Im_Egar 3 жыл бұрын

This is exactly what I've been waiting for

@KenKanifff 3 жыл бұрын

This video helped out so much. I had an old Xbox controller kicking around that drifted pretty bad. It was in pretty good shape so it always bothered me. I opened up the potentiometer to clean it and found it was full of some liquid, probably soda. Works like a dream now.

@leonardomedina7328 3 жыл бұрын

Thank you for this! I have 5 PS4 and Xbox One controllers just waiting to be fixed. This helps a lot.

@Tronicsfix 3 жыл бұрын

Nice! Hope you get them fixed!

@maark_85 3 жыл бұрын

I didn't knew that was possible to replace just the potenciometer. Thanks a lot!

@TheRedskins2175 3 жыл бұрын

Perfect Steve, I have 3 controllers that I'll start work on shortly. Thanks for the info bro!

@Tronicsfix 3 жыл бұрын

Hope you get them working!

@TheRedskins2175 3 жыл бұрын

@@Tronicsfix I'll update you once I'm done. It may take a couple days because I need to order new analog sticks.

@lucasandonato531 3 жыл бұрын

Just cleaned mine, now it's as good as new! Thanks for the tutorial ;)

@Tronicsfix 3 жыл бұрын

You're welcome!

@ThePols87 3 жыл бұрын

Excellent video as always!

@alenpiljak 3 жыл бұрын

did you ever think about making your own show on discovery channel or something similar? All your videos are so satisfying to watch and you are a great presenter :D

@randyguzman2236 3 жыл бұрын

I've been waiting for this video for a long time 😭😭😭

@Tronicsfix 3 жыл бұрын

The wait is over!

@Mars3556 3 жыл бұрын

This is a video I’ve been trying to find for years! You’re the best!

@Tronicsfix 3 жыл бұрын

Glad I could help!

@leesonti 3 жыл бұрын

Another good one🔥🔥😉 Stick drift is a problem hardcore

@Tronicsfix 3 жыл бұрын

Yep...super common

@TheSkaldenmettrunk 3 жыл бұрын

Very good. That will may come in handy. Thanks.

@alexcervantes409 3 жыл бұрын

Thank you so much for making such great content!!!

@Juliett-A 3 жыл бұрын

It's kind of obscure, but you forgot that the 4th way to fix stick drift is to replace the thermal paste.

@Tronicsfix 3 жыл бұрын

Ha, ha...BUT ONLY if you use the perfect amount!

@adamherold903 3 жыл бұрын

ty for the laugh

@Pyro-Maniac 3 жыл бұрын

I fixed mine by taking it apart completely, then put just put a drop of wd-40 in the little square box. Haven't had any issues since, lol.

@humnaset 3 жыл бұрын

Don't forget, you must measure the paste in "pea size" unit

@ashebennett 3 жыл бұрын

@@Pyro-Maniac I may try this first. That's DEFINITELY a project I could handle lol

@ArturoCuellar54 3 жыл бұрын

Great video as always Steve! Your videos are so entertaining and educational! Ive been wondering, where do you get the analog stick replacements? Is mouser a good place to get them?

@Guigao2901 Жыл бұрын

Thank you soooo much! I bought a spare analog stick (the square with two potetinometers) from a Xbox One controller for 1 USD and I fixed my Series controller up and down stickness and drifting by doing the method 2! The only difference is that I got the small spart (metal ring) that you removed and, instead of putting it back after cleaning the insides of the potentiometer, I replaced with the spare part's one (since the original seemed damaged) and it worked (on second try, I had to use both metal rings from the spare potentiometers because I destroyed the first one putting it back in)!!!!!

@ivelsuop9104 2 жыл бұрын

Great video! Thank you very much!

@KHSxDAVIDHERNANDEZ 3 жыл бұрын

Dude your videos are so helpful! Thank you wizard!!!!

@Tronicsfix 3 жыл бұрын

Glad you like them!

@Jellybubbles667- 3 жыл бұрын

hey tronic steve im happy you made another video

@anthonyhewitt9397 3 жыл бұрын

Your an inspiration to us doityourselfers. I like how u said requires soldering skills. And not just get a soldergun and solder it. I did my guitar and it took me like 7 diff tries just to learn how to solder then doing it and redoing it. Its deff not just a matter of getting the tools. U need the skills when it come to soldering

@Jengaman64 3 жыл бұрын

Great video man! Stick drift is such a big issue with controllers unfortunately

@carloscrick7042 3 жыл бұрын

Love your videos bro!! Thanks!

@Jinaum 3 жыл бұрын

Fixed my issue. Even tho I had to go a lil roundabout to get here. Just how to open a gamesir g4s controller was challenging as it was. But once I got the the potentionmeter I could use some well needed ipropanyl on it to clean. Works better than new now! By some reason it had a lot of black build up on one side. No idea why. But it stopped all shenanigans all together. Thank you :)

@changedpepe7745 2 жыл бұрын

Hello TronicsFix. I recently started learning to repair XBOX controllers. I'm glad people like you are way ahead of me in skills, so we can learn new things just by watching your videos. Thanks for that! I have a question about the potentiometers. When you start testing the first replacement method (around 3:46), it shows that the X and Y axis aren't at zero, so they aren't perfectly alligned. What is the maximum % that you can have there?

@diegonanamejia1510 2 жыл бұрын

Less than 0.1 its ok

@Ellie_3621 3 жыл бұрын

Bro your the only legit KZfaqr

@Gr1sk1ng3n 2 жыл бұрын

Thanks you i was absolut to bit a new controller you are a legend ❤️‍🔥

@REMEDY-REPAIRS 3 жыл бұрын

Amazing thanks 👍🏾

@mikeforrest5912 3 жыл бұрын

Excellent explanation and work with the microscope!

@sawyermack7739 3 жыл бұрын

Thanks, Steve. This video will help me in the future, because I'm looking for a broken PS4 controller to fix

@XDSasukeUchiha 3 жыл бұрын

thank you for making this video

@coldflorida 3 жыл бұрын

thank you soo much, i was genuinely about to buy a new one

@Ahhdeadly 3 жыл бұрын

Just the video i wanted you to make, I wanted to see how you would go about it using a solder, thank you!

@hecunotmakingalogisquad5785 3 жыл бұрын

this guys is a legend

@michaelknight8797 3 жыл бұрын

wow so much work!! so complicated!!! so much time put into it!!! you want a fast and easy fix??? just get a NEW CONTROLLER!!!!!

@Straight_White_Fatherly_Figure 3 жыл бұрын

I have never had a problem with analog drift, but this is good to know.

@robocombo647 2 жыл бұрын

Keep going your almost at 1 mil

@3v17m03 3 жыл бұрын

I have a new Ps4 Controller that drifted. I cleaned it all up and it works fine. Good Video man :)

@Tronicsfix 3 жыл бұрын

Yep, cleaning can help.

@cienciavisual 3 жыл бұрын

Heyy great info. Thanks. This is a great channel.

@Tronicsfix 3 жыл бұрын

You're welcome! Thanks for watching.

@MrWrecker7 3 жыл бұрын

Thanks, clean the potentiometer works for me

@lover_juice9095 3 жыл бұрын

Thanks for this video

@Tronicsfix 3 жыл бұрын

You're welcome!

@AM.Alhammadi 3 жыл бұрын

Oh my god finally my drifting solution has come today non of the other vids worked

@Tronicsfix 3 жыл бұрын

One of these methods should work!

@germanbenitez5073 3 жыл бұрын

Cant u just blow on the sticks

@smurfx 3 жыл бұрын

holy crap this video is super convenient as i'm having trouble with my right stick on my ps4 pad.

@hetetakkies 2 ай бұрын

First time ever opening a PS5 controller today and thanks to you didn’t Austin Evan, thanks!!

@chillmushroom6016 3 жыл бұрын

I usually just blow on my joy stick when it acts funny and it works

@Tronicsfix 3 жыл бұрын

Yep, that'll get them working sometimes. These methods are for when that doesn't work anymore.

@allclassic__1143 3 жыл бұрын

Great video thanks. 👌🏻

@Tronicsfix 3 жыл бұрын

Glad you liked it!

@mahrufurrahman9759 3 жыл бұрын

Very nice.

@fallingReign1 3 жыл бұрын

Under the microscope again... Thank you I needed this today ☺️☺️

@InfernoByrd1 3 жыл бұрын

Love your videos man! Could you do one to show where you manage to purchase all your gear and micro components to replace the faulty ones? I've also been struggling to get HDMI ports off of a PS4 PCB, idk if it's because I don't have anything hot enough but the solder just won't flow and I've tried several heating utensils and methods.

@allthetimeitgoeslikethat916 3 жыл бұрын

So I have two newish controllers, both with stick drift issues. I'll be trying some of these fixes tonight, I'll post my results tomorrow. Wish me luck!

@Igotconfidenceandanxiety 3 жыл бұрын

how it do?

@someguy6986 3 жыл бұрын

you fixed it yet?

@toiletpapermerchant9310 3 жыл бұрын

Op died while cleaning rip

@kingfaaiz 3 жыл бұрын

THANK YOU!!!

@marcojung2044 2 жыл бұрын

Thanks!

@edisonedboy882 3 жыл бұрын

Great video. Can you kindly recommend (list) the set of tool kits required for this operation?

@HighFlight2k2 3 жыл бұрын

Man. Your video was two weeks too late for me. I unfortunately ruined my sons elite controller. I got one stick replaced but the second one didn't come out as cleanly and I think I ruined a trace to one potentiometer as it is at full left deflection in the test software. It was also my first time using hot air. Live and learn I guess. Thanks for helping and sharing!

@y2keefus 3 жыл бұрын

awesome video. i have never soldered before, but i'm giving it a try. y-axis on left analog stick from xbox one is drifitng up to the north pole, and i'd hate to throw away the controller because of a little piece. i think i will just try and switch the one potentiometer and see how that works, because i don't think there is a need to swap out the entire thing. thanks for the video.

@Tronicsfix 3 жыл бұрын

Good luck!

@tungflamingo 3 жыл бұрын

Thank you Steve. I can repair my friend DS4 by replace the potentiometer :D.

@SandF3DPrinting 3 жыл бұрын

Where's a good place to get new parts for if I need to do this to my controllers? Thank you for making videos like this. They are extremely helpful

@leviperry4600 Жыл бұрын

Good looking out bro. I couldn't find any where else a method to fix my drift without replacing the whole damn thing or using air which never works.

@nyallucas2790 3 жыл бұрын

Quality content, love watching the processes. Successes and failures. I can't get a PS5 this side of Xmas so please find a catastrophic fault so V2 can be purchased with no buyers remorse .....

@AC_Milan1899 3 жыл бұрын

Quality video

@tonyb.1459 3 жыл бұрын

Liked the video before watching

@mahdiraisy4342 3 жыл бұрын

Cant wait to see your series x disassembely video

@ammarkadem3202 3 жыл бұрын

I’ve been looking everywhere for a tip for this. Thank you so much Steve! Also I heard that blowing really hard into the analog stick gap works too

@Tronicsfix 3 жыл бұрын

Hope this helps! I get a lot of questions about this so figured I'd make a dedicated video. These clips will also be in my next video on Sunday.

@paulb1802 3 жыл бұрын

You're awesome dude. From G

@prep7686 3 жыл бұрын

I've managed to fix 30+ DS4 🎮 since the lock down thanks to this man (without soldering, as I don't have that equipment/knowledge)

@Tronicsfix 3 жыл бұрын

Wow, nice! That's awesome. Nice work.

@sirtimatbob 2 жыл бұрын

So all you have done is the Option 2, potentiometer steps right around 6:00 to remove them without soldering and it's fixed many controllers? You clean them the same way as shown in the video?