in this video we go over how to repair those nasty bubbles that mess up your epoxy finish
Пікірлер: 290
@cynthiagabriel57374 жыл бұрын
I really like that you are willing to show your mistakes and how to fix them. That is actually very good information! So many of these people showing their epoxy projects are not showing their failures or their repairs. They make it look unrealistically easy.
@GoodViewWoodworks4 жыл бұрын
Thank you Cynthia! It does take some practice but I hope to be able to show people that if you have a little info before you start you can have a successful project.
@FarmerJesse3 жыл бұрын
Love your transparency about your errors. As a wood worker myself, when I began I thought everyone did everything perfect the first time. After making a few mistakes its easy to get down on yourself as you think only you are having these problems. Transparency like this helps people big time.
@PCUser-sq7rk3 жыл бұрын
'I do not want you to make mistakes I did'. Excellent advice. Thank you Bro being frank and straight forward. All the best.
@barrydoubleday81444 жыл бұрын
Good video with easy explanation. Wished I'd seen before I started my project.
@ItsJbunny3 жыл бұрын
You just made me relax over my last issue that things are fixable thank you for the low stress method! Appreciate this!
@GoodViewWoodworks3 жыл бұрын
Its Jbunny no problem!!
@TheRocket5553 жыл бұрын
great video thanks from NJ. my table is fairly large and the epoxy is quite expensive so rather not pour another top coat. this worked great, thanks!
@jk66532 жыл бұрын
Excellent video! Very helpful for a beginner in epoxy pouring.
@jess20103210 ай бұрын
Just wanted to thank you man, your one of the few that break it down in depth for us beginners!
@GoodViewWoodworks10 ай бұрын
You’re very welcome!! Thank you for the encouragement!!!
@lfmtube4 жыл бұрын
Thank you very much for show your work! Subscribed! Best regards from Argentina.
@ramblingriver2 жыл бұрын
Very cool, I was wondering how to repair this stuff. And props on the one man show. Subscribed!
@timshelton43033 жыл бұрын
Thank you ! just did my first pour missed a few bubbles. Needed that advice
@mellowrockboomboom76974 жыл бұрын
Hey man thanks for your expertise in solving my problem...great help!!
@nathancrandell95384 жыл бұрын
I know I am late to the comment party, but so thankful for this video. I just watched the video (all 4 parts) on delivering the table. When I saw it go out I was like oh no the holes!!! I know it is no fun having to redo things, but glad I caught this right after the last video. Great Job!
@GoodViewWoodworks4 жыл бұрын
Thanks alot! This project was a fun one. But you’re right it’s kinda annoying to have to redo something .
@JanineMKartist4 жыл бұрын
I’m telling you . This will be a life saver for my issues with resining my mixed media painting . Good thing I’m planning to do the area with the issue in matte finish . Another you tube lady doing counters showed how to sand down the area to be even with the rest of the piece . The lowest disc I have is 320. My other lower ones are too coarse. Don’t have 220, so hopefully 320 will be good. Practicing on a scrap tun off piece of art resin. Nice table by the way. They look fun to make. Hopefully when covid is over I’ll look for a local class teaching how to make river tables. Anyway. Your tips is saving me grief over a spot where the resin resisted the resin layer below . Gives me hope for my piece and pocket book.
@GoodViewWoodworks4 жыл бұрын
Janine Kurzinger thanks for watching and good luck!!
@JanineMKartist4 жыл бұрын
GoodView Woodworks I hope it works because I’m so frustrated with this piece
@mesowinss4 жыл бұрын
Great video man. I'm making my first epoxy table next month and this video realy makes me more confident knowing that I can fix it if I happen to make a mistake and trap air bubbles.
@jrtaylor214 жыл бұрын
Me too. Did two small grill countertops and i have the bubbles. Need them gone asap. Good video.
@weaponizedmath43692 ай бұрын
Had I thought ahead I would have mixed a small amount of epoxy before the seal coat and filled all potential "Bleeders" in advance. Using this same technic
@scottd29862 жыл бұрын
Helpful tip for seal coats and problem areas like that, warm up the epoxy first in hot water to make flow almost like water. Gets in every nook and void quicker and easier to releases the bubbles faster before the resin sets up. Also had good success torching a crevice tool and speed setting the epoxy in small holes that won't stop gassing in my seal coats. Keep up the great and informative videos. For all the newbies to live edge 3 seal coats minimum or more till the bubbles stop
@GoodViewWoodworks2 жыл бұрын
Great tips! Thank you
@truballr32 Жыл бұрын
Good tip I have little dents in my finished product but I’m leaving it because I’ve spent too much money on this shit lately. The microwave is gonna have to hide it for now and I noticed that using a blow dryer is not as effective as a torch because the blow dryer moves the epoxy out in a circular manner, instead of melting it down flat.
@stillrandy4 жыл бұрын
I did a live-edge bar top with an epoxy resin and at first I got a few bubbles. After sanding it down I did a lot of research and tried a new method. After pouring & squeegeeing, I used a heat gun on it, very lightly. You could watch the bubbles disappear, it levelled out real nice, and it was the best finish I've ever had.
@GoodViewWoodworks4 жыл бұрын
Awesome! Thanks Randy!
@iamphat4443 жыл бұрын
Awesome video, thanks. Those bubbles were driving me crazy! LOL!
@capistranodecor49974 жыл бұрын
Thank you !!!! You helped me a lot !! 👏👏👏👏
@christopherskoglun20122 жыл бұрын
Great video, thank you! I have this exact problem with my table and was stressing about how to fix it. Now I see it's fairly easy. Also, where is the video for doing the satin finish? I looked but can't seem to find it. Thank you.
@JordanWoodwerx4 жыл бұрын
Thanks for the tips Nathan!
@bigrickysplace2534 жыл бұрын
Thanks for the tip dude,, I tried my hand at the epoxy art for the first time and I think it turned out pretty good!!
@GoodViewWoodworks4 жыл бұрын
That’s awesome! You should post them up on the Community page.
@bigrickysplace2534 жыл бұрын
@@GoodViewWoodworks a couple are Christmas presents for my family on Nov the 23rd so I'll do it after that..so they won't see them!!
@kevintaylor8832 Жыл бұрын
Dude you crack me up. Thanks for the video
@paulal.brownlee85583 жыл бұрын
I enjoyed your fixing, goid job! How do you get tiny pin hole bubbles out?
@kimberlymcpeeks77514 жыл бұрын
Great video and easy to understand explanations. I can’t find the video on how to make it a satin finish?
@louisevallieres91243 жыл бұрын
I just did my first Resin project, a wine barrel top, deep pour 2", We had a blow out so lost most of the deep pour resin. I would say that we have 1/4 of the pour in the top. We have lots of bubbles and have embedded cork in a pattern as well. My question is, can i fill in my holes once sanded as you did, with the deep pour resin? We will be doing another pour once all the cracks are sealed. thinking of sealing cracks with clear Gorilla Glue whats your opinion?
@lu13ffy4 жыл бұрын
Hi NathenI hope you're fine ? thank you for the video it was rewarding. I only want to have an idea about the products for polishing to have transparency at the end of the project and thanks in advance 😊
@charlierivera57254 жыл бұрын
thank you for the video. Is always see a technique from different ways of doing something.. thank you
@charlierivera57254 жыл бұрын
What is your preference of epoxy? What brand do you buy
@timmytube4 жыл бұрын
@@charlierivera5725 I go over here to get mine www.goodviewwoodworks.com/recommendations
@user-yu9gd4dq5o4 жыл бұрын
Thank you for your advies , greating to the mouse🐭 from holland😁
@sll-tt6bj3 жыл бұрын
Enjoy the video very helpful what do you use to seal the wood I'm just starting out what's a good epoxy to use for pours
@GoodViewWoodworks3 жыл бұрын
Casting epoxy for deep pours, and table top epoxy for sealing the surface and flood coating the surface. amzn.to/3dlw6lk amzn.to/2O2RH9E
@bradbond5337 Жыл бұрын
Nathan, i used this technic on my first river pour table. I could not figure out how to get rid of divots that kept showing up and I followed your steps and it turned out wonderfully. Thanks for taking the time to show this process. I could not find anyone else that offered this solution. enjoy your presentations. By the way, did you get the mouse???
@michaelhollister99872 жыл бұрын
Great overview and sharing what to avoid
@mikesmith21024 жыл бұрын
Always like your vids. Keep going.
@GoodViewWoodworks4 жыл бұрын
Thanks Mike!!!
@mustafaferoz54603 жыл бұрын
I just did my first table, and did a mistake in the end, after the flood coat, I just poured some epoxy zigzag thinking it would level but it didnt and cured like that. As I don't have more epoxy on hand right now, so can I just wet/dry sand and buff it to glossy surface?
@HH_Badger Жыл бұрын
This channel is great! You made our first project come out almost perfect and if we had followed your tips to the letter it probably would have been perfect. However, we have a spot that we cooked the epoxy with the heat gun and the reaction ran away on us and we got some massive deep bubbles. welll 1/4" deep and maybe a 4"x6" area. Can I just take a router bit and router out that little section and re-pour? How do I prep the routered hole?
@frolein11 ай бұрын
Thank you for making this video!
@rebeccas.6704 жыл бұрын
What does the temperature need to be? What is a seal coat, do you use the same epoxy
@darryl54644 жыл бұрын
Thanks for the tips, now just have to wait till summer to be able to fix the bubbles on mine.
@GoodViewWoodworks4 жыл бұрын
You’re welcome!!
@bruceclarke2657 Жыл бұрын
Great videos. There are always imperfections. How do you eliminate bubbles below the surface, or can we get a video on routing out a string of bubbles? Idea would be to add some offsetting colors. thanks
@dalhousiekid Жыл бұрын
Thank you SOOO much for this lesson! I thoroughly my table was ruined because of bubbles from not sealing oak wood. Btw, what is the best way to seal wood?
@mikesmith21024 жыл бұрын
There is always time to redo it. For free!!! Good fix. I've never tried a spot fix before. I keep adding seal coats until it's looking good or I sand and put down a second flood coat.
@Kefo113 жыл бұрын
Amazing video.... How do you clean the holes? I can't seem to clean them there is dust inside i guess... Will it fade out with the pour?
@holleyhagerty2560 Жыл бұрын
I notice I have tiny chunks of epoxy after my table dried, do I use the same technique as you did for the bubbles?
@stellarluna26373 жыл бұрын
Great video . I'm doing my first charcuterie board . Small void in the black walnut . Filled it with a red resin . The area around the void has a dark stain to it now . Should I be able to sand that out so that just the filled void area is left? Or is my piece stained for good (bad) ? Thanks
@GoodViewWoodworks3 жыл бұрын
I’m not sure. Send me a pic to my Instagram or Facebook @goodviewwoodworks and I’ll see if I can better answer your question.
@calebcleek33963 жыл бұрын
Can you share the link for the satin finish you were talking about?
@Rosspilot3 жыл бұрын
If the bubbles are in epoxy that I colored blue, should I try to match the repair epoxy with the same dye to match? I don't think it will be exact. Can I do the repair with clear?
@love.islam834 жыл бұрын
Thank you it's really help
@jaythomas31804 жыл бұрын
Your new mouse buddy is going to become an epoxy pro watching you work. Can't wait to subscribe to his channel.
@GoodViewWoodworks4 жыл бұрын
😂
@stevedarnell84444 жыл бұрын
Do they sell mouse PPE on Amazon.
@montannalancaster96605 ай бұрын
Please tell me what grit you used to sand it down. I've tryed 80 grit and it seems like it sand what sealer I put on...next pour more bubbles. Help me please!
@jasonwebster80273 жыл бұрын
ok? do you flood coat again at the end after the holes are filled? How do you get the shine back at the end?
@weaponizedmath43692 ай бұрын
Im currently doing an outside bar top, my seal coat went surprisingly flawless except 1 spot where the heat gun was kept too long on a problem area causing that spot to Hyper harden, having not seen a video YET of approving an outdoor pour the outside temp humidity plus potential bugs, floating dabree in the air, and continous inspection for the 1st 6 hours and keeping the epoxy cool with fans it went pretty good, looking to final pour very soon after sanding and fixing this problem section. Thanks for the advice. Its an 8ft bar made of pallets on wheels 😮 the top itself is made up of 485 triangles 🔺️ placed in a "Harlequin" pattern, cross my fingers it will be funtional, seats 10 and hope it turns out just a beautiful as the indoor models, im not into videoing my LIFE or how toos, its a learning experience.
@GoodViewWoodworks2 ай бұрын
Good luck! Sounds like a fun project!
@weaponizedmath43692 ай бұрын
@@GoodViewWoodworksI'm currently sitting at the outside bar, it's been 5 days since final pour, I'm thinking a lite sanding and buff and polish should be good, it's protected from the sun mostly...and I added blue Mika 💙 looks like the sky on a breezy day. I took a small Dremel and carefully hollowed those bubbles along with sanding and you don't know they were there ...thanks for your videos and CHEERS to you.
@MrEd-kk7uj Жыл бұрын
Love your dog......
@timmytube4 жыл бұрын
I was wondering how you fix air bubbles. Thanks for the tipth
@GoodViewWoodworks4 жыл бұрын
😂🤣 thir can you thpare a tipth?
@lawrence45964 жыл бұрын
Great tip, after bubbles are filled and table is sanded what would you put over the whole table to get that gloss finish back?
@GoodViewWoodworks4 жыл бұрын
You pour a flood coat of tabletop epoxy
@lindaconway61464 жыл бұрын
Thanks for the information. Did you put another seal coat on then another flood coat? Or did you just put the flood coat on? Thanks
@GoodViewWoodworks4 жыл бұрын
I did 2 more seal coats and then a flood coat.
@mountainviewturning53194 жыл бұрын
Wow great job
@salazar69953 жыл бұрын
What if it’s on the edge of the countertop? My problem is it keeps dripping. Should I form it ?
@bjb512 жыл бұрын
Ty much for this video.
@timgrahn3624 Жыл бұрын
What Polish Compound do you use to Buff the Table. Can I Polish over 320 Grit or Do I Have to go to a Higher Grit Before Buffing. Tim
@colleenblount94774 жыл бұрын
I have a question. I have 3 coats down now and have about 6 little bumps ,like maybe dust particles. Can I just sand and repair those spots or do I have to do a complete coverage not just the spots ? Thank. I really enjoy your videos
@GoodViewWoodworks4 жыл бұрын
You can sand and buff the surface to rid of those bumps 😉
@doughtyp864 жыл бұрын
When doing the seal coat, do you use the coating resin or casting resin please?
@GoodViewWoodworks4 жыл бұрын
That depends on how punky (soft/rotten) the wood is. If it’s solid you can use the coating epoxy. If it’s soft I recommend sealing/stabilizing with casting epoxy.
@Edcabraltv2 жыл бұрын
Thanks.subscribed. what is the sealer you forgot to do? Skipped step doing what? Like waxing?
@GoodViewWoodworks2 жыл бұрын
It’s called a “seal coat”. When you’re using the epoxy as a finish, you need to seal the surface of the wood with 2-3 seal coats of epoxy. The way this is achieved is by spreading a thin layer of epoxy on the surface (about 1 oz per square foot) and letting it cure, then scuff sand and repeat. This will prevent any bubbles coming through the surface.
@TotalBoat4 жыл бұрын
These are great tips for saving an expensive project! Great work! (and nice hat!) We wanna see the yacht this table is going to!
@GoodViewWoodworks4 жыл бұрын
Thanks! And for the hat too!!! Here is the link to the yacht River Table for Boat DIY Part 4 || Finishing and Delivering!!! kzfaq.info/get/bejne/h7dhYLColqype5c.html
@thegoldendownbeat13784 жыл бұрын
Random question..... how do you heat your shop? Your shop looks similar to mine and currently mine is freezing cold and it makes it hard to work out there for long periods of time. And the table looks great! Love the color!
@GoodViewWoodworks4 жыл бұрын
Well not very efficiently that’s for sure. I just have a propane heater and a couple of electric rotating heaters. Nothing fancy
@mlarsen773 жыл бұрын
Did you drill out the bubbles and refill them?
@PM-oj5si2 жыл бұрын
Thank you!!
@francisandmarkmartinez85952 жыл бұрын
Hello, I’m enjoying your work. I laid some epoxy on a table top and keep having bubbles appear in same area. How long after poring can I continue to use heat gun to pop the bubbles?
@GoodViewWoodworks2 жыл бұрын
You can use it until it starts to set up(harden).
@talaldaghestani89654 жыл бұрын
I have 3 coats of poly and many tiny pin head bubbles. Can I sand the off the bubbles and what grit would work? I really dont want to sand whole finish off and reapply the poly. Thanks!
@GoodViewWoodworks4 жыл бұрын
320 grit would be best.
@lindaconway61464 жыл бұрын
How long do you wait between seal coats? Like your videos. Thanks
@GoodViewWoodworks4 жыл бұрын
I wait until it’s cured then scuff sand. Thanks for asking!
@dharmeshchalla29474 ай бұрын
Hello sir how can i make epoxy resin & hardener.use for rounded Ball shape Coating
@mtk80202 жыл бұрын
It would have been nice too see not only how to fixe it, but how did it look after you fixed and project was finished.
@Rutger360x3 жыл бұрын
Hey, if you have a transparent resin and there are bubbles everywhere. Is it possible to fix it, or make it less visible?
@GoodViewWoodworks3 жыл бұрын
That all depends if the bubbles are on the surface or throughout the middle of the “river”. If they’re on the surface you can sand the top down and pour another layer. If they’re through the middle of the pour then there really is no way to fix that.
@jrtaylor214 жыл бұрын
Do you have to sand the entire thing or can you focus on the affected area? And did you wet sand or dry sand. Think i missed you saying anything about it.
@GoodViewWoodworks4 жыл бұрын
I would sand the entire thing so that the surface is uniform. I dry sand to 220 grit before applying a flood coat. If you want to buff it to s as finish, dry sand to 800 grit then buff.
@danagraves45142 жыл бұрын
I’ve had to sand down a table top used 220 grit and now it looks like a white haze even after wiping down with alcohol. I want to add another coat of epoxy. Can I go ahead and put on this new coat or do you suggest I sand with a different grade of paper? Also will this white haze disappear?
@GoodViewWoodworks2 жыл бұрын
It will turn back to clear once you add your finish coat of epoxy. No extra sanding needed
@anthonycampos15493 жыл бұрын
Thanks for the video. I have a spot that cured to fast and had lots of deep bubbles. Do you know what caused that? Thanks
@GoodViewWoodworks3 жыл бұрын
Usually this because the epoxy was either poured to thick or that the temp in the room was too high.
@anthonycampos15493 жыл бұрын
@@GoodViewWoodworks ok thanks. I’m seeing it has to be with the fireplace. House is a little warm.
@lindaconway61463 жыл бұрын
Can you use CA glue to fill a bubble in your seal coat or should you fill the bubble with epoxy? Thanks
@GoodViewWoodworks3 жыл бұрын
You can definitely use ca glue on the seal coats!
@diycreationsvet48784 жыл бұрын
Thanks man.. and it sucks when is about to get solid epoxy lolo... bro by any chance do you do lives stream?
@GoodViewWoodworks4 жыл бұрын
Yeah, I live stream every Tuesday evening at 7:15 EST
@sagarlakhwani83562 жыл бұрын
After filling those spots , can't we finish it gloss. Does that repair be seen on gloss finish that is why the solution is to finish satin?
@debbiebarnett57292 жыл бұрын
How would you do this if it were bubbles in spar varnish?
@SombiliUketui2 жыл бұрын
What is the difference between casting and counter top resin? I live in 🇬🇧 and haven’t seen “counter top” resin on Amazon. I used one on my counter top (probably casting resin) and there are too many pit holes after it dries.
@GoodViewWoodworks2 жыл бұрын
Tabletop or “countertop “ epoxy is designed to only pour 1/8” thickness and has different properties (scratch resistance, heat resistance, uv resistance) than the deep pour “casting” epoxy. The casting is designed to pour thicker pours and to fill voids. Hope this helps.
@SombiliUketui2 жыл бұрын
@@GoodViewWoodworks oh thanks for responding. Checked Amazon and all I could see is coating and casting resin, but it did mention it could be used on table tops. Should this work for a counter top?
@GoodViewWoodworks2 жыл бұрын
Try this: amzn.to/2XdpukA
@SombiliUketui2 жыл бұрын
@@GoodViewWoodworks oh thank you!
@johndeaux99873 жыл бұрын
It seems half the people say seal coat leads to a weak bond between wood and epoxy and others say not sealing leads to issues like this. Have you ever had any cracking or strength issues by seal coats?
@Kellybrumbaugh3 жыл бұрын
What do you use to seal
@michellealmonte65953 жыл бұрын
Hey is there a finished product video for these videos??
@thomasmatijas27752 жыл бұрын
Fist time doing epoxy table. Is using a squeegee needed or could you just skip that and sand down the area after cured?
@GoodViewWoodworks2 жыл бұрын
It’s not necessary. However we’re just trying to get a thin coat of epoxy on the surface to seal the wood.
@dgoins64 ай бұрын
What do you mean by seal coat? Super thin coat of epoxy? Polyurethane? Shellac? Help
@michelepiatek3014 жыл бұрын
After your first seal coat try a burn -n- stick for the stubbern air holes, Mike has a few videos on that and it works,
@GoodViewWoodworks4 жыл бұрын
Yeah I have seen that. Thanks Michele!
@dodge_ram_theminiaussie95963 жыл бұрын
Hello. Ive been working on an epoxy project and I was wondering if you have any tips. I torched the epoxy I think too long. It isnt burnt but the bubbles are white and hardened. Do you have any suggestions?
@GoodViewWoodworks3 жыл бұрын
The only way would be to remove the post that has been torched. You can use a drill or chisel or any method you can to get it out. Then sand the void and pour more epoxy into the void.
@dodge_ram_theminiaussie95963 жыл бұрын
@@GoodViewWoodworks ok thanks
@jordangoodwin10032 жыл бұрын
What was the cause of this? I just had some people lay epoxy on my cement floor and I have hundreds of those little bubbles. They said they sprayed it with denatured alcohol after. Not sure why this happens tho
@sethvaughn95894 жыл бұрын
When will the satin finish video be posted?
@bradleyheathhaysable4 жыл бұрын
How thick was that pour? Do you remember what temperature it was in your shop as the table was curing?
@GoodViewWoodworks4 жыл бұрын
It was 2.5” thick and around 60°F in the shop.
@gurdeepkaur23952 жыл бұрын
Do u have to sand the whole thing if you have like minor lint bumps?
@GoodViewWoodworks2 жыл бұрын
Not necessarily. You can sand the individual spots then buff it back to shine.
@AngelasMixedMediaArtist4 жыл бұрын
Thx awesome
@sjc6263 ай бұрын
What if I wanted to do a high gloss finish afterwards?
@WaylanderWOR4 жыл бұрын
So I have a question, i poured my resin to deep and it dried to quick and now it's cracked the epoxy how do I fix that?
@GoodViewWoodworks4 жыл бұрын
Pour more epoxy into the cracks.
@belinda88553 жыл бұрын
I didn’t have enough resin for my kitchen table so I added Polyurethane and it’s bad any suggestions
@GoodViewWoodworks3 жыл бұрын
You may have to sand the whole thing down and pour another flood coat.
@insertnamehere88994 жыл бұрын
Hi, I hope you are still there, we used epoxy on our Formica countertops this past weekend, and now we have a lot of very tiny little bubbles, nowhere near as big as the bubbles in your piece, there must have been bubbles in our epoxy. would we need to make injections into all these bubbles?
@GoodViewWoodworks4 жыл бұрын
More than likely you just need to sand the surface and red coat with more epoxy
@insertnamehere88994 жыл бұрын
@@GoodViewWoodworks thank you so much for responding
@JanineMKartist3 жыл бұрын
Can you polish it back to a glossy shine after ?
@GoodViewWoodworks3 жыл бұрын
Yes you can!
@Jaclyn_LaRen08294 жыл бұрын
I NEED HELP lol, I had a couple of very bad bubbles and one that essentially burned a bit. I sanded down my piece and wiped with water in between sanding but I had to sand some down so far that the paint was exposed. Nevertheless, my piece is a bit over sanded and it’s cloudy once the water dries. Can I still pour a new coat of epoxy to get my original gloss/glass like finish?
@GoodViewWoodworks4 жыл бұрын
Jaclyn Fallara yes you can!
@Jaclyn_LaRen08294 жыл бұрын
GoodView Woodworks Thank you so much.... you’re the best!
@GoodViewWoodworks4 жыл бұрын
Thank you for watching and commenting!!
@ruslanidzodzuashvili50484 жыл бұрын
Hey mate, i have got some big crack right through my epoxy resin table while it was curing, could you advise why this happened? And how to fix it please. Thanks
@GoodViewWoodworks4 жыл бұрын
This happened because the epoxy was either poured too thick or it was too hot. You can pour more into the crack to fix it.
@ruslanidzodzuashvili50484 жыл бұрын
Ok mate Great.... How can i avoid in future an overheated epoxy?
@GoodViewWoodworks4 жыл бұрын
Great question. You can add a couple fans on each side to reduce temps.
@ruslanidzodzuashvili50484 жыл бұрын
Thanks.. appreciate that.
@UNIK-wood-design4 жыл бұрын
Hi couldn’t you just scrape the all surface a few millimeters and redue the all surface with epoxy? Thanks for the video...