How To Fix Damaged Transmission Cooler Line (Andy’s Garage: Episode

How To Fix Damaged Transmission Cooler Line (Andy’s Garage: Episode - 62)

Рет қаралды 229,309

5 жыл бұрын

Andy Phillips shows how to repair damaged transmission cooler line where it connects to the radiator.
Below are links to other videos of mine pertaining to the transmission:
How To Check Transmission Fluid: • How To Check Transmiss...
Replacing Transmission Oil Pan Gasket & Filter: • How To Replace Transmi...
How To Fix A Locked Transmission Shifter: • Transmission Locked in...
How To Repair Transmission Lines: • How To Repair Damaged ...
DISCLAIMER:
The individual featured on the Phillips Vision KZfaq Channel identified as Andrew Phillips, also known as Andy Phillips is not a professional mechanic or certified repairman. He does not have any formal training in the automotive field, or any other trade. He is strictly a Do It Yourself handyman.
Phillips Vision, or the individuals featured on this channel, assume no liability for anything you choose to do to your vehicles, appliances, games or any other items featured in the videos before, or after watching one of the videos or utilizing the content from this channel.
All Do it Yourself (DIY) repairs or modifications you perform are at your own risk. In some cases, even if you perform everything properly, you can destroy or damage one or more things you are working on resulting is costly repairs.
In addition, if for some reason, the instructions on this channel are incorrect, resulting it something becoming damaged, Phillips Vision and those featured on this channel WILL NOT reimburse or pay in any way the costs that may be incurred due to following wrong instructions.
PLEASE DO NOT PERFORM ANYTHING SHOWN ON THIS CHANNEL (PHILLIPS VISION) UNLESS YOU FEEL COMFORTABLE AND CONFIDENT TO DO SO.

Пікірлер: 129

@Dargox59 3 жыл бұрын

I've spent 2 weeks trying to repair this part and now I found this video. Thanks so much.

@stanmorton8975 Жыл бұрын

Been working on this issue for two days, trying to get lines to fit. Never occurred to me use high pressure hose. You're a genius.

@dreamingcode 3 жыл бұрын

It was sooooo hard finding a video on this simple and common task. Thank you posting. I do want to use all copper so I need to search how to bend it.

@richardtrowell8812 Жыл бұрын

Thanks for video. Excellent guide for repairing transmission line. Fittings for transmission lines and power steering requires using special wrenches to prevent stripping out. They are made of a softer metal than other bolts. Brass I believe.

@jakesdaysoff4683 2 ай бұрын

This is the closest repair video to my issue. Thank you

@ccachella 3 жыл бұрын

not paying 300 bucks for just a cooler line, Thanks for this video.

@NsanityGarage 3 жыл бұрын

Good info man... will be using this to fix a trans line that twisted on me during my LS swap

@PhillipsVision 3 жыл бұрын

NsanityGarage thanks for the feedback, glad it helped

@kurtgood2914 Ай бұрын

Thanks for sharing this and it helps me a lot

@vincentx8429 8 ай бұрын

you da truth you just made my hole project be completed in on day

@ilyk1ng 3 ай бұрын

thanks man really appreciate it this help me alot i thought i was gonna have to replace the whole line

@PhillipsVision 3 ай бұрын

Awesome, glad it helped

@tonycadena6033 3 жыл бұрын

Thank you for your help

@CharlesFockaert 2 жыл бұрын

Perhaps should have flared the end of the existing line to help prevent hose from slipping off.

@randyschmittou8708 4 ай бұрын

That's exactly what I was thinking. I have done this exact repair and had it blown off by the pressure in the line.

@simbagarage5943 3 ай бұрын

Totally agree... transmission 200 psi. It'll go flying without a flare.

@Mid-Ohio 4 жыл бұрын

Just had this issue tonight on my 94 Ranger 4.0 put some new parts on for a good tune up.Went to fire fire an test drive had a puddle of tranny fluid the ground...won’t move at all seen it squirting out at that fitting as u described in your video.Imma try to mimic your idea thanks 🤟🏽

@PhillipsVision 4 жыл бұрын

Mid- Ohio- cool man, good luck 👍

@Mid-Ohio 4 жыл бұрын

Phillips Vision welll went to auto zone and Advance here in town they had no help for me unfortunately.So went to a friend and he managed to cut me a line and reuse that fitting.Had to put 4qts of transmission fluid in lost a lot.But job is done your feedback definitely helped! 👌🏽👌🏽

@PhillipsVision 4 жыл бұрын

Mid- Ohio- good, glad it helped. Just make sure the line you used is for fluid and high pressure

@kidschannel4354 4 жыл бұрын

Thanks Big Homie🔩🔧👩‍🔧

@paulroe4646 2 жыл бұрын

Killin it brotha!

@robracks3896 2 жыл бұрын

After you add the new fitting is the tube that is clamped in supposed to be able to move or no

@PacoOtis 3 жыл бұрын

Wow! Thanks Dude! We definitely owe you a beer! Best of luck!

@PhillipsVision 3 жыл бұрын

Thanks for the comment, glad the vid helped

@mikenorwood5195 Жыл бұрын

Thank you sir !

@blazeaglory Жыл бұрын

My 1990 Honda prelude has a female threaded compression connection and it's in a tight spot that has to have a quick short bend in the connection or it hits the outter end of the radius rod. Where can I find something like that?

@LosDaGhost973 3 жыл бұрын

Thank you

@johndrennen8342 7 ай бұрын

So this is a question that pertains more to your video regarding replacement of a starter on a 4X4 Trailblazer with the 5.3 in it and more specifically the part of that video relating to moving the transmission lines just enough to be able to remove the starter. I have done that and still am unable to finagle the starter out of the truck and I really dont want to go the loosten engine mount / jacking up the engine route. Do you think that removing either or both ends of that trans cooler line is a viable solution to getting that starter out? Thank you VERY much in advance.

@anthonybesterwitch2546 Жыл бұрын

Thanks 😊

@apacalyptic1freelancevideo823 Жыл бұрын

thanx i just wanted to see how the fitting was mounted . no thread tape or sealer just bare thread fitting . got it

@susu-mi7kx 3 жыл бұрын

Hey Andy I replaced the radiator... ( 2001 grand cherokee laredo 4.0 6 cyl) both lines were seized to busted up radiator so i disconnected them from the trans lines( skinny hoses) just I did not trace where the top radiator trans cooling line connects back to. please help. does top radiator line connect with top skinny hose.? help a girl out please its been days...

@WerkToday 3 жыл бұрын

Great Video!.Subbed up!..I need to know what size line you purchased. I inherited a 1992 pickup and need to find out what size the thread/line I need.

@PhillipsVision 3 жыл бұрын

Thanks. There are different sizes you can purchase. Find out what size your trucks uses and purchase the matching size

@BVegasadventures Жыл бұрын

I’m going to try that on my 71 Lincoln. I changed the radiator and the transmission line got cut…. Hopefully this does it. I really don’t want to replace the whole metal line. Thanks

@HealthSupercharger Жыл бұрын

the pipe from the radiator is 3x as long as needs to be and that forces the hose to make an S curve instead of a L curve going straight up into the upper metal pipe. I would only have the radiator solid pipe stick out 1.5 inches and i would use crimp connectors instead of worm clamps that can vibrate loose and burn up your transmission if the fluid leaks out too much. Crimp connections can be crimped with vise grips and like you did double clapped it is ideal. I would also try to protect that hose with another hose or some metal cover or braided metal hose because transmissions burn up if you run them low. Best is to not use the radiator transmission coolers because if they rust out they will contaminate your transmission and destroy it.

@geraldbrakefield3874 Жыл бұрын

you need to make a video

@richardtrowell8812 Жыл бұрын

How would you keep transmission fluid cool when under load? Or from burning. The transmission comes with a cooler for a reason.

@mariorios7318 3 жыл бұрын

Thats a good ideas tbh shit i be dealing all this time to fix my damn truck always the store be sending me the wrong cooler and now u gave me a really good idea not wasting my time at the shop and thanks for the ideal

@PhillipsVision 3 жыл бұрын

Mario Rios glad it helped

@gman77gas 8 ай бұрын

Thanks

@TheHazelberg 3 жыл бұрын

Hi Andy, Thanks a lot for showing this repair video. I was just wondering, is there not a need for bleeding air out the pipe? perhaps not, thats why I am just asking :-) I have sweating hoses and will replace the hoses with power steering hose just like you did.

@PhillipsVision 3 жыл бұрын

Good question. Yes, any time you work on the transmission you want to bleed the air out.

@franktalan5441 2 жыл бұрын

@@PhillipsVision how do you bleed the transmission?

@micahhill4786 4 жыл бұрын

Power steering hose is what you should use fuel hose will just get eaten away. Just a suggestion

@PhillipsVision 4 жыл бұрын

Micah Hill thanks for the feedback 👍

@gavindemetreu3788 3 жыл бұрын

They also make hose specifically for transmission fluid as well. Sold at most parts stores

@roddawg320 2 жыл бұрын

Hello Andy, great vid, but have a question. is it ok to use a type of thread lock or Teflon tape instead of the process you went through? thanks in advance.

@PhillipsVision 2 жыл бұрын

You could try that but remember the transmission line has pressure so you want a secure connection

@roberthein2156 2 жыл бұрын

New metal line, heat it, bend it on any round pipe, let it cool, then cut off any length. Connect your rubber hose: straight.

@how2wwii249 Жыл бұрын

Thank you so much, saved my life, man! 🙏🙏

@Midwest374 Ай бұрын

Mine just went out had no power anymore RpM reved up when you hit the gas and all fluid leaked out. Hope something like this didn't cause internal transmission damage transmission fluid was 3 quarts low as well

@marketgotitall798 2 жыл бұрын

Hey can u use thread sealin

@rish77ify 7 ай бұрын

Great video Andy I have a similar leak, would I need to use any gasket sealer between the nut and pipe? (Both replacement pieces are brass)

@PhillipsVision 7 ай бұрын

No gasket needed

@rish77ify 7 ай бұрын

@@PhillipsVision thank you! Worked out so far!

@8Cylindres Жыл бұрын

Hey mate thank you for the video! Quick question! Are the hose clamps sufficient enough to hold the hose in place on the line?

@PhillipsVision Жыл бұрын

Should be if tightened properly

@8Cylindres Жыл бұрын

@@PhillipsVision Thank you

@agentbey 3 жыл бұрын

Do you recommend using loctite on the fitting threads?

@PhillipsVision 3 жыл бұрын

I’d recommend using it on most threads, that’s good stuff👍

@lastkings4293 2 жыл бұрын

Where did u get the line ?

@karitunes1 3 жыл бұрын

Plz Help!! 97 Ford ranger lower radiator transmission cooler line leaks. I replaced lower radiator fitting with hose/hose clamps like you but fluid leaking at both sides of rubber hose, so I got the compression fitting to join both steel lines and they leak too. What's the issue?!! I tightened hose clamps tight as possible and even a wire tie was tighter. Idk what's wrong. Thx for reply

@PhillipsVision 3 жыл бұрын

The transmission line has pressure so if the fittings are not properly attached it could be the issue with leaking. Was the hose the correct inner diameter?

@user-pi5xc1ns3g 6 ай бұрын

Some one done this to my truck before I got it and all the hoses leak.

@justilianoacevedo2185 8 ай бұрын

Can you show where the transmission hose connects at the engine. I tolled my Mustang pulling it and the hose got disconnected at the engine. That nipple where the hose goes connected became missing. I actually don’t know what it looks like or what’s it’s called. I called it ‘nipple’ Thanks 👍

@djohnnineonesix820 4 жыл бұрын

Dude.... My car leaking atf is a 97 oldsmobile achieva.. I wish have all that space... Removed the adapters put some shelak and reinstall them on the rad. Then wait 2 days re screw the lines into the adapters...

@Melocole1 2 жыл бұрын

Where did you get your replacement line tip from and what part name is it under because no one seems to be able to find it anywhere I go?

@PhillipsVision 2 жыл бұрын

Autozone. It was years ago so I don’t have the part numbers

@alanOHALAN Жыл бұрын

Is the house 3/8 or 5/16?

@btaylor3559 3 жыл бұрын

I know nothing. When splicing a trany line, are air bubbles any concern or does compression burp any such out of the system?

@Dargox59 3 жыл бұрын

@nikorawirimana6443 7 ай бұрын

Hi, sorry you don't have listed the size and bits that you bought, ie: the pipe type and hose fittin names and recommended hose use or the type that you're using in the video.

@PhillipsVision 7 ай бұрын

The line is 5/8 I believe. This video was filmed a few years ago. This car was a 1986 Pontiac Fiero GT, not sure if it’s the same size for your vehicle

@travistripp331 Жыл бұрын

Having this issue on a 2007 Audi a4 a week after changing the radiator

@johngortatowski-qx5xs Жыл бұрын

On the transmission please , the part that the line goes into ,that installed on or into the trans 😊

@carrieyates9605 5 ай бұрын

How do you disconnect underneath jeep

@khalifahpierce5186 2 жыл бұрын

What kind of line is that with the fitting on it you use to go in the rubber hose please get in touch thanks

@PhillipsVision 2 жыл бұрын

Metal Transmission line

@micahobaca 2 жыл бұрын

Do you need to double flare or is single flare ok?

@PhillipsVision 2 жыл бұрын

Single should be fine

@67oldsD88 21 күн бұрын

Where do you get that short premade trans line?

@PhillipsVision 21 күн бұрын

@@67oldsD88 from a parts store by order or the dealership

@JuanyJuanes 2 жыл бұрын

damn i took apart a ton of shit to replace a factory trans line, this would have saved a lotta time if i had found the parts

@cesarmora1911 3 жыл бұрын

Does it need to drain first before cutting it?

@PhillipsVision 3 жыл бұрын

Yes, or you will need to have a pan underneath for dripping

@ONE-ADAM-TWELVE 2 жыл бұрын

My car, a 2016 Chevy Sonic, is in need of a TRANS COOLER LINES TO RADIATOR repair. I came across this video because the dealership wanted to charge me $456 to do this. Is that too high? Any other alternatives?

@PhillipsVision 2 жыл бұрын

Very high. You could use coolant line and flare it

@Birk21883 7 ай бұрын

Where do you get the replacement line and fitting you used?

@PhillipsVision 7 ай бұрын

Autozone or Advance Auto

@chainfeeds2.043 Ай бұрын

what size tool did he use anyone help me out i have a stuck bolt like this also what size tool

@PhillipsVision Ай бұрын

It’s a standard mini pipe tube cutter. It can cut 1/8 - 7/8

@granthopper5 4 жыл бұрын

Where did you get the pipe by chance?

@PhillipsVision 4 жыл бұрын

Grant Hopper Autozone or Advance Auto. They both have it behind the counter. You’ll just need to measure what thickness you need. You’ll also need compression fittings

@kangokidkidd4037 3 жыл бұрын

Where did you buy those new clamps auto parts store just has a assorted selection I need about 10

@PhillipsVision 3 жыл бұрын

Yeah, I had them from a large assortment pack I got at Harbor Freight

@kangokidkidd4037 3 жыл бұрын

@@PhillipsVision okay thanks Amazon it is then

@bettyboop4342 Жыл бұрын

I was wondering was that for a Buick Rainier?

@PhillipsVision Жыл бұрын

No, Pontiac Fiero GT

@nealhead7673 3 жыл бұрын

I thought you said compression fitting ??

@beyondeternity3009 3 жыл бұрын

Were there any o rings on the line ?

@PhillipsVision 3 жыл бұрын

@orlandoferreira5412 Жыл бұрын

Where I purchase that hose with fitting ?

@PhillipsVision Жыл бұрын

Autozone

@jamiekessler424 3 жыл бұрын

Is that cutter tool just a pipe cutter?

@PhillipsVision 3 жыл бұрын

Yes, available at any hardware store

@joegray6269 4 жыл бұрын

What kind of wrench did you use

@PhillipsVision 4 жыл бұрын

Joe Gray to be honest I don’t remember the exact size, that was filmed a while back

@joegray6269 4 жыл бұрын

@@PhillipsVision the reason why I was asking was because I stripped out the. Transmission cooler bolt on on my radiator and I had to do what you did and I'm thinking about using a compressed fitting or just a thick rubber hose and some tape and clamps

@robertglasper320 3 жыл бұрын

How did that job hold up on the leak ?

@PhillipsVision 3 жыл бұрын

Great, no issues

@marthagarrett7805 Жыл бұрын

how many hrs it took you?

@PhillipsVision Жыл бұрын

Around (2) hours

@donwest5387 7 ай бұрын

what was wrong with the original connection?

@PhillipsVision 7 ай бұрын

It was bent and causing a leak at the input

@truhunk1 3 жыл бұрын

Whatever works.

@brussell639 4 жыл бұрын

That radiator looks like it needs to come out as well.

@PhillipsVision 4 жыл бұрын

brussell639 it was removed and upgraded to an aluminum high performance one in a layer video.

@markbensley138 4 жыл бұрын

@@PhillipsVision I need help ASAP. My sister hit a coyote last night and her car is dumping transmission fluid from the bottom of the radiator. The car will switch gears but when you hit the accelerator it won't go anywhere

@PhillipsVision 4 жыл бұрын

Mark Bensley DO NOT drive the car, you’ll burn up the transmission. She may have pull the tranny line from the radiator or damaged the line itself underneath. I would get the car jacked up (use stands) and fill it with cheap fluid. Have her run the car in park and have someone check underneath where it’s dripping from. If it’s a damaged line you will have to repair it.

@Texaca 4 жыл бұрын

@@markbensley138 --- don't drive it, you'll damage the internals of the transmission 🤔 and it'll never drive again .

@nealhead7673 3 жыл бұрын

The old "threaded bolt" 🙄 I HATE the bolts without threads. WHAT were they thinking ? 🥺

@donwest5387 7 ай бұрын

flare your "stub"; so the hose won't blow off

@Nowata918Liddell 5 ай бұрын

I have a question/issues with my transmission cooler line

@marketgotitall798 2 жыл бұрын

On bad threads

@PhillipsVision 2 жыл бұрын

I would recommend re-cutting the threads first with a tap & die set

@donwest5387 7 ай бұрын

a "kink" won't make it leak

@donaldaulenti4386 2 жыл бұрын

Shoe Maker

@susu-mi7kx 2 жыл бұрын

I recently replaced my leaking radiator myself, . Now, I went ahead and bought new lines But, I can't for the life of me figure out which rubber hose to plug the top vs bottom in. Does it matter? Thanks! The radiator lines bought are part number 52079753AB. please help a girl out