Small tip, add the lube before installing new o-rings helps for install, and makes a better seal when in and outside diameter has some lube.
@TRUCKINGTIPSDIY4 жыл бұрын
thank you, will try that next time👍👍
@c.a.mcneil75994 жыл бұрын
Thanks for taking time to do this video. Learned that we can rebuild them like my air dryer
@TRUCKINGTIPSDIY4 жыл бұрын
thank you!!
@WolfgangWilbois4 жыл бұрын
Great video, that are very helpful information and thumbs up. I'm owning a Skoolie in Germany and the air is leaking at the valve. So I will try to solve the issue as your are explaining here and this should save a lot of money :-) Best wishes form Germany Wolfgang
@TRUCKINGTIPSDIY4 жыл бұрын
thank you, hopefully this helps you, good luck!!!
@oscararmijo27458 ай бұрын
Thanks for the video, it helped a lot. This repair kit works for a 2005 KW T600 and you don't have to disconnect the air lines if you don't want to, there's plenty of room to do it. 👍
@yasmanyalpizarful8 ай бұрын
Hi Oscar, I have the same truck year and model, do you also have a cat engine by any chance?
@oscararmijo27458 ай бұрын
@@yasmanyalpizarful yes, CAT engine.
@josephsanchez7503 жыл бұрын
This is the best dadh brake valvula repair ever seing, Thanks so much.
@TRUCKINGTIPSDIY3 жыл бұрын
Thank you
@isaaccharles40515 жыл бұрын
Thanks for the videos brother I am a journey man heavy equipment mechanic with 8 years of heavy duty truck and equipment experience learning a lot I am new to your channel just subbed to it keep them repair videos coming God bless
@luisarellano13254 жыл бұрын
Great video, what does it mean when that dashboard valve doesnt release even when you have your tanks full of air?
@transport215 жыл бұрын
can you post videos on using the diagnostic software ? showing us step by step troubleshooting.
@lukep60175 жыл бұрын
Excellent VIDEO. Thank you
@dahirali904 жыл бұрын
Man U are amazing if we get this we shouldn’t spend money on shops hats off man thank u
@TRUCKINGTIPSDIY4 жыл бұрын
thank you glad it helped you!!👍👍👍
@quocbinhduong-pv4ef5 жыл бұрын
thanks anh vì clip này cũng hay.
@seemsmad3789Ай бұрын
Saved me a about $100. Thank you!
@kashkash15412 жыл бұрын
Hey big boss, thanks for this. My yellow button does not pop out below 20 psi when I do the air brake test. Do you know what would be causing it and how I can repair it. Thanks man.
@bbtrucking16162 жыл бұрын
Thanks you saved me $350
@TRUCKINGTIPSDIY2 жыл бұрын
Glad it helped you, thanks for watching sir 🙏
@jackschissler2554 жыл бұрын
Did not know you can rebuilt these? 🤔. Interesting.
@roysagredo21782 жыл бұрын
I ordered this kit and parts don't fit. The value is from a volvo with 6 air hose fittings and I was told that the valve is no longer made so they ordered a replacement but all hose fittings are totally at different locations so I saw your utube showing how to fix the existing one
@BigGeorgiaBoi11 ай бұрын
It’s for a freightliner
@brentsmith70394 жыл бұрын
2013 peterbilt paccar when I push the trailer supply in I hear air leaking from the valve and I also hear air blowing out my trailer valve on my air tank. When I connect a different truck to the same trailer everything work fine.
@mellemel22474 ай бұрын
I heated up the screws, and it still won’t unscrew. What can I do to loosen them?
@dimitrovbmw4 жыл бұрын
So the kit doesn't comes with O rings for the fittings on the back of the valve, most of the time they are the ones that leak? I guess is better to test the valve before buy kit or new valve!
@TRUCKINGTIPSDIY4 жыл бұрын
no o rings for fittings, only for the valves
@ravshana Жыл бұрын
Do they sell replacements for those individual fittings on the back or need to buy whole new one?
@Hohstapler Жыл бұрын
@@ravshana just buy 90degrees 3/8” fittings and replace the one that is leaking.
@ericksorenson30593 жыл бұрын
Excellent video. Thank you sir.
@TRUCKINGTIPSDIY3 жыл бұрын
Thanks for watching !!
@cordcord1604 жыл бұрын
Thank u so much for showing me how to do it
@TRUCKINGTIPSDIY4 жыл бұрын
thanks for watching, glad it helped you!!
@brookalemayehuasfaw Жыл бұрын
Thx for the video. Does this system work on 2015 Volvo D13? Does it come with rebuilding kit?
@ratondenicaraguatriniteno1140 Жыл бұрын
I have liquid whit my valve now thank for this video look easy to fix and save money
@TRUCKINGTIPSDIY Жыл бұрын
If you have water in the air lines check the air dryer
@juansorto39685 жыл бұрын
Excelent video you did a great job
@TRUCKINGTIPSDIY5 жыл бұрын
thank you!!
@levi9kirk8 ай бұрын
I'm not sure what type of valve control I have, but my buttons don't pop out at 40psi or all the way down to 0psi they just kinda slowly release. Any idea if the control valve itself is the cause of this problem?
@GillGill-ds7hq2 жыл бұрын
Excellent vedio
@roysagredo21782 жыл бұрын
I still have the new valve and tried to make it work. I talked to 5 different mechanics and they didn't know exactly how to connect hoses and said to play with it. 3 hoses seem to are identified but three are not. I know that the truck and trailer buttons each have an inline and output. And there is an exhaust but that's it. I am told that I have to follow each hose but being a 2002 vehicle is not easy and I am old. Any suggestions
@clewashingtonwashington10864 жыл бұрын
Will the rebuilt kit stop air coming from the blue line when the brake is applied? I don't have a check valve. I have to double check valve s off the foot valve.
@SarbjitSingh-oe6eb2 жыл бұрын
the exhaust port is leaking when brakes are released. Do I have a bad valve?
@expert12192 жыл бұрын
Thank you so much. Saved me some money. Knowledge is power
@TRUCKINGTIPSDIY2 жыл бұрын
Im glad it helped you, thanks for watching sir 🙏
@misaelfd59752 жыл бұрын
How can I buy the kit of valves ? Or find online to buy,just the valves
@kennethburchett63933 жыл бұрын
Good stuff man! ✌🏻
@mitmmusicgroup79994 жыл бұрын
Love your diy vids... keep me coming
@TRUCKINGTIPSDIY4 жыл бұрын
thanks for watching, appreciate it 👍👍👍
@aztxtransport27764 жыл бұрын
It broke on me 3 times in the last 3 years. Today it started to act up. Yellow valve wont push in. Cant release truck breaks. Finally it quit. I sprayed dw40 just to get it released and go home. Why it wont release??? Am just trying to get new one in the morning. Any trick to get me going?
@lifeotr59344 жыл бұрын
How does a person know that this has to be done ? What should i be looking for?
@TRUCKINGTIPSDIY4 жыл бұрын
some times air will start to leak, you will hear it. also when the valves won't eject automatically when Air PSI is below 60
@danielcesar25 Жыл бұрын
Hi there. Is that kit for a freightliner columbia ? Thanks
@TRUCKINGTIPSDIY Жыл бұрын
Yes it should work thanks for watching sir
@nebjef78063 жыл бұрын
Where is rubber grommet on trailer valve? Did you miss it?
@Mr.Adolvera3 жыл бұрын
How is it going Thanks for the video did you buy that in a store or online if so do have the link to it?
@TRUCKINGTIPSDIY3 жыл бұрын
i bought it at the freightliner dealer, i tried to put a link but couldn't find it,, i think ebay has it now
@kholloway2694 жыл бұрын
Great video.
@gman310886 ай бұрын
Thanks. This is what I needed
@ricardonarvaez16284 жыл бұрын
Hello Sir, I have a question here. Can I use that kit to for my volvo truck as well ? Thank you very much
@TRUCKINGTIPSDIY4 жыл бұрын
hello, i bought it at the freightliner dealer, but i seen it on ebay too
@ricardonarvaez16284 жыл бұрын
@@TRUCKINGTIPSDIY Thank you very much
@jamesritter98065 жыл бұрын
I did just that. Put new one in and relized i needed a new plate. The one with 6 phillips screws. So i took the old one off the bad one amd swapped it. But as i put the old face plate on tge new mv 3 valve all the valves popped out. So i put them all back in. But now when we go to release the brakes the tab wont stay pushed in. I have to hold it the whole time. I dont know why
@TRUCKINGTIPSDIY5 жыл бұрын
did you rebuild it or put a new valve? if you rebuild it only thing a can think of is if you put the oring the correct way, mon minute 5.55 on this video
@chiriqui10003 жыл бұрын
Muy buen tutoring....
@kennyuscg3 жыл бұрын
What year and model is your Volvo that this valve came from?
@TRUCKINGTIPSDIY3 жыл бұрын
hello, this valve is from a freightliner cascadia
@KaramjitSingh-xx9ww4 жыл бұрын
Hi bro. Plz advise me . I have bendix 801631 mp3 dash valve. Plz suggest me which Maintenance kit I can buy for this dash valve.
@TRUCKINGTIPSDIY4 жыл бұрын
hello, im not sure, you can ask at the dealer, is it for a cascadia?
@jaswinderbrar68652 жыл бұрын
I have a same bendix 801631 mp3 desh valve I’m locking for same I check dealer not have
@felixgonzalez23508 ай бұрын
THANKS DUDE GREAT VIDEO!
@yunielibarrahernandez3573 Жыл бұрын
A mi me esta pasando lo mismo en peterbilt 387 y me refleja la balbula del parquin tanbien
@stupendouslife8128 Жыл бұрын
Thanks 👍👍😃😃👏👏
@meradu24 жыл бұрын
Nice work 👍
@TRUCKINGTIPSDIY3 жыл бұрын
thank you sir!!
@lvicente2000 Жыл бұрын
Truck valve replacement freighliner
@jimmypinu3 жыл бұрын
this part number can use volvo d13 2013 AS WELL OR DIFFRENT FOR VOLVO
@TRUCKINGTIPSDIY3 жыл бұрын
Im not sure, you can get it from your dealer, they will give you the right kit
@jimmypinu3 жыл бұрын
@@TRUCKINGTIPSDIY thanks
@mahadaAden2 жыл бұрын
Thank you
@erpidiovaldez77324 жыл бұрын
How can I know when this valve is bad?
@TRUCKINGTIPSDIY4 жыл бұрын
some times air will start to leak, you will hear it. also when the valves won't eject automatically when Air PSI is below 50
@happy_2b_nappy4 жыл бұрын
That’s exactly what happened to me this morning o- ring is bad just started leaking outta the blue just swapped my tail gate line with trailer line and got back to my yard I drive dump truck
@great2c4me2 жыл бұрын
@@TRUCKINGTIPSDIY what is the MV3 found in, freightliner Columbias?
@bhupindertiwana28124 жыл бұрын
Hi can you please help from which store I'll get this kit?
@TRUCKINGTIPSDIY4 жыл бұрын
hello, i purchased it at the freightliner dealer, but i seen them on ebay www.ebay.com/itm/303489310001
@Rexzxv Жыл бұрын
❤
@venanciotavares16363 жыл бұрын
Thank you so much
@TRUCKINGTIPSDIY3 жыл бұрын
Thanks for watching sir 🙏
@jonathancerdan41992 жыл бұрын
Where can I buy this kit?
@TRUCKINGTIPSDIY2 жыл бұрын
They have them in the freightliner dealer
@ericlopez25493 жыл бұрын
👍👍
@alexsantana5954 жыл бұрын
good video
@TRUCKINGTIPSDIY4 жыл бұрын
thank you sir
@roysagredo21782 жыл бұрын
I ordered this kit and doesn't ha
@mikegonzalez99714 жыл бұрын
Mine doesnt pop out with that much force could something be wrong
@TRUCKINGTIPSDIY4 жыл бұрын
did you put the new springs inside?
@mikegonzalez99714 жыл бұрын
@@TRUCKINGTIPSDIYyeah it does. But I figured out it was the lady at the inspection that was failing people because she was hating life. What a bitch. But when I went again with another person they passed me and told me everything was working like it should.
@kelvincool46242 жыл бұрын
Just buy the whole thing , that shit is like 250
@TRUCKINGTIPSDIY2 жыл бұрын
The choice is yours, is like patching a tire, new tire is 300 patch 20
@able_trucking7804 жыл бұрын
So 1hr of work $20 part and watch your video or $200 new parking valves lol
@user-vo7ep5bu1n4 ай бұрын
What is the part number
@TRUCKINGTIPSDIY3 ай бұрын
Its on the video
@Rexzxv Жыл бұрын
I just pay 500$ for that and still leaking (stupid mechanic)
@TRUCKINGTIPSDIY Жыл бұрын
Damn 500 is too much, hopefully you can fix it yourself
@nachoojeda34375 жыл бұрын
👍🏽
@jouappiola85823 жыл бұрын
Hi where do you buy those parts ?!!
@TRUCKINGTIPSDIY3 жыл бұрын
i bought those at the freightliner dealer
@great2c4me3 жыл бұрын
@@TRUCKINGTIPSDIY awesome, subscribed, shared with the freightliner Columbia group... btw, are these Cascadia parking brake valves identical to the Columbia's? I could imagine they're similar.