how to fix jewelry lobster clasp, making a spring

Рет қаралды 34,502

2 жыл бұрын

Check out all my other videos.
If you found my video has helped you go ahead and tap the like button so I know how I’m doing and go ahead and subscribe so you don’t miss out on powerful ideas.

Пікірлер: 39

@luisitamoreno53 3 ай бұрын

Well done!!!! You the only one on you tube that CLEARLY explained this. Who cares about your camera quality Your DRAWINGS ARE ON POINT! BRAVO! THANK YOU GOOD SIR!

@vb5037 7 күн бұрын

Thanks. I have fixed my wife's bracelet, I used #1 guitar string, # 2 was bigger than I need.

@michaelhuxley5172 9 ай бұрын

Yet again I had to make another lobster clasp spring. This is the second one I have had to mak for the same clasp. A new lobster clasp is in excess of £100 pounds absolutely massive saving for the cost of a guitar string. Massive Thanks again for this tutorial I came back to.

@shubikl9826 Жыл бұрын

Thank you so much for taking the time to share this with us! I broke the clasp of a necklace that means a lot and then I found your video!!! It took me like 30mn but thanks to you detailed drawings, explanation etc, I managed to fix it !! Please keep on the good work: you never know who you can help and how much you can save a memory/token 🎉🎉🎉😃😄😃

@KellyNGabe502 Жыл бұрын

Dude!! Thanks! Your diagrams worked perfectly! Fixed a kids silver necklace thanks to you Bro!! ❤

@christee299 Жыл бұрын

Ty so much for this inexpensive fix! Guitar strings... genius!

@john-john132 3 ай бұрын

Loved the tutorial. The diagram you drew was very helpful. Thank you!

@markamberg8362 Ай бұрын

thanks. very clever of you. I save all my old guitar strings so I'm going to try this. I'll let you know how it comes out.

@jimismith6648 2 жыл бұрын

0.13-0.15 gauge sting works fine, just fixed mine using this method. Thanks 🙏

@michellehumphreys3 Жыл бұрын

Thankyou so much, great detailed pictures. Big thumb,s up. Managed to fix my clasp

@lauriepayseur5897 4 ай бұрын

Thanks so much I just fixed my necklace with the help of this video!

@sdmjjewels7749 2 жыл бұрын

Wish i would have known this about a yr ago. I threw out so many lobster clips. Thanks for the knowledge.

@charisafryman-bradshaw8310 Жыл бұрын

Thank You! So much! My spring was still good it just came off. Thank you for the clear and thorough instructions

@nnnminh 7 ай бұрын

Thank you very much for this excellent tutorial.

@raymill54 Жыл бұрын

Your the man brother!! Got mine fixed thanks to your video!!! Got my subscription

@mischeviousdrshultz 2 жыл бұрын

Rock on, man! Thank you! Wish you could have demonstrated, but good explanation none the less. I am grateful!

@codmsupastar2863 Жыл бұрын

Thx homie you have a gift for breaking it down for us thank you have a blessed one

@jasaints7803 2 жыл бұрын

Dude you are a life saver 😁 Thanks

@avaalto5085 2 жыл бұрын

Thanks, I fixed my clasp

@OfficialSvelton 2 ай бұрын

Thank you!

@alaaber232 Жыл бұрын

Thank you broo 😊❤️

@Jay_Goku 2 жыл бұрын

Saved me some serious money 👊🏾

@chadt8019 Жыл бұрын

Thank you!!!

@renzyzamora3943 11 ай бұрын

Got it it help me to fix my silver clasp

@tracybrandon4079 7 ай бұрын

Thanks.

@Kloud9Studios 3 ай бұрын

worked!!!

@chandrisasi3799 2 жыл бұрын

Super 👍

@EdoZuria Ай бұрын

what wire do you use

@super-gg9sb 2 жыл бұрын

perfect

@stevewang216 2 жыл бұрын

what is the exactly spec of the spring wire and thickness?

@wassimalnahhar7605 2 жыл бұрын

Vielen Dank meister

@SWEETYGYAL2002 Жыл бұрын

Done it but the top of my clasp has a gap. I must of opened it too much 😩

@ladymoscac999 Жыл бұрын

lool the b chord

@truegrizzlesfan2292 2 жыл бұрын

You didn't show us how to place.clasp inside. I get the diagrams but a demonstration would of been better

@piratesapper 2 жыл бұрын

I’ve got the supplies to make the repairs I think just not the knowledge. I’ve made some Jewlery using fine .999 silver coins (like Liberty dimes) and sterling .925 cuff link blanks. They make a silver soldier paste that’s in this syringe that makes it so you can do the silver Jewlery soldiering without having to be an expert on using things to bond and clean a perfectly flat surface (I don’t know if you’ve ever done anything like that or want/need to.). Maybe I’ll upload some videos of me making the cuff links.

@frankbb6745 Жыл бұрын

Pry the clasp apart slightly on the lever side using a small screwdriver - the central part will fall through the enlarged gap. I used a tiny safety pin so the circular wire hole is ready made. Snip the safety pin’s long sides off with one slighly longer than the other by say 5 to 7mm and replace the old damaged wire. Place the adapted new wire onto the middle of the lever part and slide back into the clasp through the enlarged gap. Pinch back together with a pliers (put sticky tape around each jaw of the pliers to avoid damaging the jewellery)