Save your Stretch Bracelets! Use this knotting technique to finish your stretch bracelets.

Рет қаралды 674,730

Жыл бұрын

***Save 15% off your first order at Eureka Crystal Beads by using the code: SAVE15
Shop the store here:
eurekacrystalbeads.com?/aff=30
Get the supplies:
Opelon
www.eurekacrystalbeads.com/op...

Пікірлер: 134

@maddienoelle22 Жыл бұрын

This is impossible to follow.

@alisonlim96 10 ай бұрын

😂😂😂

@MizzScentsational 9 ай бұрын

String beads, use needle, follow through beads, string once, loop around again, go through bead, knit once, tie once, tie once, knot again, make a left, go over the river and through the woods, tie another knot, connect 4, the get a yatzee, throw some glue on it, and hide the knot.

@MizzScentsational 9 ай бұрын

YOU GOT THIS!! I have faith in you. 😊

@PeaceMastah 9 ай бұрын

@@MizzScentsationalNo with all the cuts in the video, it’s literally impossible to follow. Sure that it’s simple if it were actually shown properly.

@sillypersonzz 8 ай бұрын

literally mine broke when I tried this

@melumibao Жыл бұрын

I do this all the time haha. If I have some bead bracelets that do not fit my wrist, I save them using this method.

@mariatroncoso3173 3 ай бұрын

Howw?

@brin.576 Жыл бұрын

Please provide a slower video and more explanation for all ages!

@SerenityStoneCo Ай бұрын

Glue is a nice touch 👏

@coin7969 8 ай бұрын

I do exactly the same thing !! Only difference is that I stretch my elastic before I bead it for a bracelet I stretch and pull at it before I feel that it helps that way it's not "surprised" when people are trying it on!! If that makes sense 😉

@lisaredford6462 Ай бұрын

That is great advice on tying the elastic. I will definitely be doing that

@tayjane21 Ай бұрын

Brilliant! Thank you so much

@user-kq8oe6tt6r 4 ай бұрын

I like the colour

@des.outspoken 5 ай бұрын

Thank you so much this was pretty simple idk what the people in the comments are talking about. Thank you for simplifying this, I watched a whole 12 video and she was talkinG TOO MUCH AND if yall need a better explanation look for one of those videos 😂

@missywelch6215 9 ай бұрын

7yrs later im still wearing mine so no it has never broken

@starchild7820 7 ай бұрын

Got that back in da day good string😂

@coin7969 9 ай бұрын

Thanks this is by far the easiest video I've been able to understand/follow 👍I can do this easily!! Thanks a bunch

@mz.valerie 17 күн бұрын

Thankyou

@iuunaea 29 күн бұрын

Helpful ❤❤

@busybee2033 Жыл бұрын

This is what I needed to learn for rite now... Thank you so much

@jaynewpb 10 ай бұрын

you have to have a giant hole in your beads to go through with that many times.

@pippadawg7037 6 ай бұрын

I thought the same thing. I am working with tiny beads. Ugh.

@NiCaNaMex 4 ай бұрын

It worked with small beads for me just now but not the tiny ones. You can buy different gauge (thickness/weight) stretch cord. You can use thinner for tiny beads.

@harshanahar Жыл бұрын

Okay thanks I will try this

@fareenkhan7725 5 ай бұрын

Thanks ❤for easy tutorials was struggling soo much to make a knot for the bracelet before i saw video

@jananidevi1442 23 күн бұрын

Awesome

@Archita_loves_art 2 ай бұрын

You are a life saver❤❤❤❤

@Milliondollarhealer 8 ай бұрын

Saved my life ❤

@Stranger_abc_xyz... 6 ай бұрын

Thank you so much

@butterfly1401 5 ай бұрын

Thank you❤

@hassanh1917 11 ай бұрын

TYSM!❤❤

@magicalgames9372 24 күн бұрын

Thanks alot I've been struggling (I'm actually a kid and I got a bead set)

@chermans1 3 ай бұрын

Thanks!

@marymohos6352 11 ай бұрын

I use that string and it’s the best

@Luva-_- 2 ай бұрын

Glad I found your channel. New Subber! This has happened to me with bracelets and necklaces. So frustrating. I will study your videos! THANK YOU! :)

@tanyarichardson8416 9 ай бұрын

Thank you

@amandaa1844 Жыл бұрын

Do you find the fiber string stretches out over time and it shreds?

@katsilviadesigns Жыл бұрын

No that's why I love the Opelon but like with everything, given enough time, yes it could stretch out. By doubling it up it helps distribute the stress of that wear and tear.

@barbra429 7 ай бұрын

Do you have a tutorial for tying knots on smaller beads?@@katsilviadesigns

@AeliciaMechele 9 ай бұрын

nice technique

@diyanaik4091 Жыл бұрын

thankyou so much

@FootballTHProd Жыл бұрын

Could you do a tutorial how to tie string to needle?

@isaacz881 7 ай бұрын

I used a hang mans knot bc it gets tighter the more its pulled plus it has a low profile

@anandhishrenik Жыл бұрын

Ty dear

@Aaravco1 6 ай бұрын

I❤ this video 🎉

@melz3752 Жыл бұрын

I am slightly confused. You should going two beads passed the start of the Opelon but when you go to tie both sides together they are right next to each other and not a couple beads apart. Am I just seeing it wrong? Thank you for your help

@haydencomstock6121 5 ай бұрын

I think they went all the way around and back to the start but oof they didn’t explain it well

@-.-E-.- 2 ай бұрын

I was wondering that too

@legoma84 8 ай бұрын

Super easy to follow. Straight to the point. Thanks!!!

@fiona3821 8 ай бұрын

Will this work with small beads? As it looks like a big knot to pull beads through. Thanks for sharing 🎉

@gjk540 Ай бұрын

No. You nee a bigger bead hole.

@TheCozyGameress 3 ай бұрын

You can just… fold the string in half and put that into the big eye needle. Then just string beads like normal and tie off and you have four strings instead of two.

@user-wj9wk8rn9x 8 ай бұрын

Yes

@kiaramb1 8 ай бұрын

Thank u😢

@ssj6767ssj Жыл бұрын

Omggg thanks

@tinanewton3807 Ай бұрын

We need more Kat.

@MommyLucindaVlogs Ай бұрын

❤❤

@kerubohellen 7 ай бұрын

😎 🆒️

@user-qr5pj9cy4t 8 ай бұрын

Are these large hole beads? What method to you recommend if holes aren’t that large? Ream one bead to cover the knot?

@almabrisiarodriguez-xh2lo Күн бұрын

❤

@7prudent Жыл бұрын

I tie stretch bracelet really tight. Is that a mistake? I do not tie it while it stays loose.

@Emily_23462 3 ай бұрын

I'll make it by myself it is not break

@spoutingfiction 2 ай бұрын

The problem I encounter is whenever I have used Opalon with glue, it always breaks within 3-4 months as the glue has eaten away at the string.

@deniztokdogan4467 4 ай бұрын

Any advice on how to put a knot into 1mm hole?

@SquishmallowandothersAng-md7po 3 ай бұрын

This is a good idea but I tie it differently just cuz I cut the extra elastic so you can't tell and the beads just go over the knot so it doesn't look like it has a knot

@auntienikkisgamin9251 9 ай бұрын

Sometimes I have a hard time especially with 8mm or smaller

@sarahgamson8828 7 ай бұрын

Wow the holes in your beads must be huge. I tried putting a broken pearl bracelet on elastic and the holes are tiny

@karmakumara 2 ай бұрын

Mam, what should be elastic cord size for 10mm bead bracelet? .

@Ashley__Rose 10 ай бұрын

What size cord for 3.5 to 4mm beads?

@Sirlayachu 3 ай бұрын

could you link the video for this turorial??

@leeannegunn9295 Ай бұрын

How do you keep your ends from fraying?

@Blue123413 Ай бұрын

Did she go through all the beads with the needle or a few?

@ianbandola2514 10 ай бұрын

do these need to be glued ?i tried this method because its easy hopinh its secure

@AOUSI 6 ай бұрын

I wanted to make these but after watching g this video - I don’t think so.

@_dancing_toothpaste_ 9 ай бұрын

Thank you so much this is very helpful

@y_kasare74 7 ай бұрын

its bullet proof at this point

@josiealvarez587 11 ай бұрын

What size needle do you use?

@cute_aes._mafia 11 ай бұрын

the fact that u shld hv a streching fiber thread

@saiprateeksha161 2 ай бұрын

Which glue are u using ?

@meena7222 Ай бұрын

I had not 1 but 2 of them break

@nickorange4881 2 ай бұрын

How do you know how long to make it?

@sameekshaagupta-tw6fq 4 ай бұрын

How to insert wire into needle

@anastaziaqtt 6 ай бұрын

Tyt

@AnureetKaurrXD 7 ай бұрын

What the thread is called?

@charusheelasawant1933 10 ай бұрын

Ye kahape milta hai

@Anu15098 3 ай бұрын

This thread breaks very easily if it contacts with water frequently..I'd received my bracelet in the same thread..it broke down in very few days.

@user-wf8bq2vl6h 4 ай бұрын

Where I can get needle this?

@Oliverdasmushedolive Жыл бұрын

SURGEONS KNOt

@Candle221 9 ай бұрын

How about a clay bead???

@thatdavaogirl Жыл бұрын

What glue do you use?

@katsilviadesigns Жыл бұрын

GS Hypo cement works the best for me.

@charetti.spaghetti Жыл бұрын

I have this really thick string a I can’t seem to tie it because it keeps falling apart

@katsilviadesigns Жыл бұрын

Are you using Opelon Cord? That's my favorite because the knotting is easier and less bulky. www.eurekacrystalbeads.com/opelon-stretch-jewelry-cord-white-0-7mm-5-meters/?aff=30

@charetti.spaghetti Жыл бұрын

@@katsilviadesigns Mine is 1mm and I don’t think it’s that

@katsilviadesigns Жыл бұрын

@@charetti.spaghetti Have you tried any type of glue with the knot? If you have a picture, feel free to DM me on Instagram @katsilviadesigns so I can take a closer look.

@charetti.spaghetti Жыл бұрын

@@katsilviadesigns I haven’t but I also have new string and transferred it to my thinner strand of string and it fits perfectly. Thank you so much though!

@zeenation247 Жыл бұрын

There are other methods u can try for a 1mm string

@sherryyoungblood802 9 ай бұрын

My string always breaks on me

@poppette1978 9 ай бұрын

what's this kid of adhesive?

@Prodaffiliate Жыл бұрын

How many mm thé string has to be thanks

@katsilviadesigns Жыл бұрын

All depends on your beads. If you have larger holes you can use a thicker Opelon.

@SKETCHUPARTANDCRAFT 2 ай бұрын

Nice sharing my friend New friend here Please stay connect

@jennifervaldes187 4 ай бұрын

When you cut it both ends are not together but when you make the first knot they are. Please explain better

@KYKYSLAND-qt7dz 13 күн бұрын

I’ll will just go with my granny nots sorry😅

@MatimoreAgain Жыл бұрын

Opelon is NOT the best.

@amysanchez2657 7 ай бұрын

What do you suggest?

@StillChewy 4 ай бұрын

It's impossible to see what's going on. Unfortunate.

@Phoenix-Rising4 9 ай бұрын

Surgeon knot?

@Bella_and_Dolla Ай бұрын

It does NOT need to be this difficult just knot it it 4 times TIGHT and there

@laboogie 8 ай бұрын

uhhh imma find another instructional video

@raginirajput6866 2 ай бұрын

Take a coper thin wire from electric wire and rollover tha elastic and insert that wire in crystal bts

@kaede6372 Ай бұрын

@-streaminadream-5356 Ай бұрын

get closer and don’t cut out so much of the movements it gets confusing cause we didn’t see half the step

@Kat-yv5ye 2 ай бұрын

huh.

@_Jade.therian_ 2 күн бұрын

Honestly, that is so unnecessary to do those extra steps. I just use strong cord NOT string and I tie it tightly 5 or 6 times

@Ijs0728 11 ай бұрын

How is Opelon the best when it freys every time I handle it? I have the same kind, size and everything. But imma try the not in this short and see what happens. I couldn't catch the first step either but I figured it wasn't necessary cause you said if my beads allowed. Thank you for the tip.

@ambie8466 3 ай бұрын

That glue stinks so bad OMG like gasoline. I had high hopes.

@opulencebyjai 11 ай бұрын

You definitely skipped a step to follow this

@starchild7820 7 ай бұрын

TOO MUCH!!😂 IF YALL WANT TO KNOW HOW TO HAVE A STRONG STRETCH BRACELET, AFTER YOU BEADED YOUR BRACELET TIE ONE SMALL INVISIBLE KNOT 2 BRING THE BEADS TOGETHER, TAKE THE 2 LONG ENDS AND CRISS CROSS BACK THE OPPOSITE WAY THROUGH ALL THE BEAD HOLES UNTIL THEY MEET TOGETHER FACE 2 FACE , ONCE YOU PULLED YOUR 2 LONG STRINGS TO MEET AT THE TOP THERE WILL BE A BEAD IN THE MIDDLE, ON EACH SIDE OF THAT BEAD TIE 2 SMALL SINGLE KNOTS ON SECOND STRING TIGHTLY, IN BETWEEN THE BEAD, THEN DO THE OPPOSITE SIDE SAME AS, CUT CLOSELY SO THE KNOTS WONT SHOW AS ALL THE BEADS COME TOGETHER THE KNOTS WILL AUTOMATICALLY HIDE INSIDE THE BEAD, DOUBLE BAND EXTRA SUPPORT, HELLO!! EVERYONE THANK ME LATER❤👌💯