How to fix plastic interior trim on your car - DIY

How to fix plastic interior trim on your car - DIY - BMW e46

Рет қаралды 411,657

5 жыл бұрын

Please subscribe for more videos :)
Required material, tools:
- Sand paper or Cordless Multi Sander (Eccentric grinder)
- Plastic primer spray paint
- Spray paint with selected color
- Transparent lacquer spray (gloss or matt up to you)
My other videos:
Best small active Subwoofer? - • Alpine SWE-815 Active...
GPU vs GPU
RX 480 vs R9 290 • ASUS R9 290 DC2O vs RO...
GTX 1060 vs GTX 960 • ASUS Strix GTX 960 vs ...
GPUs:
Asus Radeon R9 280X DirectCU II TOP 3GB (unboxing):
• Asus Radeon R9 280X Di...
GIGABYTE R7 260X OC WINDFORCE (unboxing):
• GIGABYTE R7 260X OC WI...
ASUS Strix GTX 970 (unboxing):
• ASUS Strix GTX 970 (un...
MSI GTX 970 GAMING 4G (unboxing + benchmarks + GTA V) [SK/CZ]:
• MSI GTX 970 GAMING 4G ...
MSI GTX 980 GAMING 4G (unboxing, benchmarks, GTA V [SK/CZ]:
• MSI GTX 980 GAMING 4G ...
ASUS STRIX GTX 980 TI (unboxing, benchmarks, GTA V test) [SK/CZ]:
• ASUS STRIX GTX 980 TI ...
TEST NVIDIA GTX 9xx GPUs - MSI [SK/CZ/EN]:
• TEST NVIDIA GTX 9xx GP...
ASUS STRIX GTX960 2GB OC vs TURBO GTX960 2GB OC [EN]:
• ASUS STRIX GTX960 2GB ...
Mouses:
ASUS ROG GX 860 BUZZARD - gaming mouse (unboxing & review) [SK/CZ]:
• ASUS ROG GX 860 BUZZAR...
MSI INTERCEPTOR DS 100 gaming mouse [SK/CZ]:
• MSI INTERCEPTOR DS 100...
CONNECT IT Battle Mouse V2 (unboxing):
• CONNECT IT Battle Mous...
MSI INTERCEPTOR DS200 GAMING MOUSE:
• MSI INTERCEPTOR DS200 ...
CASEs:
Zalman R1 (unboxing + review):
• Zalman R1 (unboxing + ...
Zalman Z1 (unboxing):
• Zalman Z1 (unboxing)
NZXT S340 - BLACK + RED (unboxing):
• NZXT S340 - BLACK + RE...
Motherboards:
GIGABYTE Z97X-Gaming 5 (unboxing):
• GIGABYTE Z97X-Gaming 5...
GIGABYTE H81 D3H (unboxing):
• GIGABYTE H81 D3H (unb...
GIGABYTE 970A-UD3P (unboxing):
• GIGABYTE 970A-UD3P (un...
ASUS RAMPAGE IV EXTREME Battlefield 3 Edition (unboxing):
• ASUS RAMPAGE IV EXTREM...
MSI Z170 GAMING PRO AC (unboxing + review) [SK/CZ]:
• MSI Z170 GAMING PRO AC...
ASUS SABERTOOTH Z97 MARK S (unboxing) [SK/CZ]:
• ASUS SABERTOOTH Z97 MA...
MSI Z170A XPOWER GAMING TITANIUM EDITION (unboxing) [SK/CZ]:
• ASUS ROG MAGICAL MUG
ASUS H170 PRO GAMING [SK/CZ]:
• ASUS H170 PRO GAMING [...
PC Builds:
Gaming PC build with Z97, i5 - 4690K (July 2014):
• Gaming PC build with Z...
Bench table - Test station:
• Bench table - Test sta...
How to build Cheap PC ( with Intel Haswell Refresh - 250€):
• How to build Cheap PC ...
Gaming PC, socket 2011 (rebuild) ( november 2014):
• Gaming PC, socket 2011...
Gaming PC Build, FX-6300, R7 260X + benchmark (december 2014):
• Gaming PC Build, FX-63...
MSI RED DRAGON - Richard Sláma (G3258, Z97, GTX 970):
• MSI RED DRAGON - Richa...
Actions:
IT EXPO Košice 2015:
• IT EXPO Košice 2015
ASUS SCHOOL - OVERCLOCKING with water - ASUS POSEIDON GTX 980 TI Platinum i5-6600K:
• ASUS SCHOOL - OVERCLO...
SOŠT OC SHOW 2015:
• SOŠT OC SHOW 2015
ASUS ROG action with MATRIX GTX 980 TI Platinum [SK/CZ]:
• ASUS ROG action with M...
IT EXPO KOSICE 2016 - MSI:
• IT EXPO KOSICE 2016 - MSI
IT EXPO Košice 2016:
• IT EXPO Košice 2016
ASUS AKCIA APRÍL 2016:
• ASUS AKCIA APRÍL 2016

Пікірлер: 107

@e46.r 5 жыл бұрын

To the author - Please write materials used in the description. Thanks

@eastsideofthetracks8311 Жыл бұрын

I’ve done this to all my e46’s great way to make your interior look fresh as hell ! And cheap no need to spend money on new parts 💯

@elyjahthomas9938 Жыл бұрын

Makes the whole car look brand new!

@robertbarbutti6672 5 жыл бұрын

That old matte texture goo comes off with alcohol and elbow grease. Thanks for sharing the tear down - I will be pulling mine for the same job....

@emanueladamache7034 5 жыл бұрын

alcohol?

@JohnFaire 5 жыл бұрын

@@emanueladamache7034 99% isopropyl alcohol. And, it takes awhile. Sanding with a 3M gray scuff pad soaked in this alcohol works 5x faster

@emanueladamache7034 5 жыл бұрын

@@JohnFaire thanks for the reply

@philipgrobler7253 5 жыл бұрын

I just removed all the black goo from the trim on the console and buffed it with Clean Green, which gave it a beautiful matte finish, no respraying or paint was needed. 👍

@philipgrobler7253 5 жыл бұрын

@@JohnFaire I litetslly used my fingernails to scrape the black goo off and buffed it to a matte funish with a microfibre cloth and Wynns Clean Green. I do not know why BMW had to put the black tar like crap over the trim to begin with.IMHO, you just create a future PITA for yourself by covering it in any spray or chemical compound again after removing all the gunk ftom it in the first place, the simpler the solution to the problem, the longer it will last.

@DriversSide 5 жыл бұрын

Nice work! I need to do this for my m3 on my channel!

@MartinsTips 5 жыл бұрын

Driver's Side I want to buy M3 ♥️

@SDKwarrior 5 жыл бұрын

nice video quick and informative and you didnt even say a word lol

@atakan888 4 жыл бұрын

Thanks. I was looking for this

@goldenhumb1 5 жыл бұрын

Hiya, what's the tune??? I really love it

@royramalingam5247 5 жыл бұрын

if there are chrome pices which should not be painted put lipstick or balsam over them so the paint wont stick then you can scrap the lipstick off

@jackyboy7675 Жыл бұрын

Nice

@RojerLockless 4 жыл бұрын

Go to 2:50 if you obviously realize you have to take the parts out of the car to work on them first.

@badboyjuni4429 5 жыл бұрын

What sandpaper grits did u use

@Czarek796 5 жыл бұрын

Jest i polski akcencik ;) lakier bezbarwny

@hermannweinzierl5731 5 жыл бұрын

Good idea

@kamil6114 Жыл бұрын

Legancka robota

@larslovestech 5 жыл бұрын

hahaha...martins PC and CAR tips...new channel...nice...LOL,looks like you had fun in dubai too...hope you are well mate...havn't seen a build from you in a while...???

@MartinsTips 5 жыл бұрын

Lars loves Tech hahaha thanks, but I am in Denmark now haha 😂

@TheMrMoric 5 жыл бұрын

you can remove that soft coat of rubber with ipa or ethil alcohol instead of painting

@ikeepgettinbanned5525 2 жыл бұрын

does it look like shit though? i have a tan interior pieces and underneath it looks real faded and discolored. i want to paint but dont painting the cupholders seems like a bad idea to me. i wonder what kind of paint would work best for this.

@surume6627 2 жыл бұрын

@@ikeepgettinbanned5525 I also have tan interior I’d recommend duplicolors interior and vinyl, sand color is pretty close

@dadotomic9359 4 жыл бұрын

Thanks.... very good video...

@hacker007300 5 жыл бұрын

The worst thing i notice on my 1 serie is the plastic arm rest it always cracks and makes squiz sounds. It’s soul bending

@AvzBiker4Life 4 жыл бұрын

That’s wicked

@stuartabsent5122 5 жыл бұрын

Cool exactly what I want to do.

@johnkarampinis9919 3 жыл бұрын

wow perfect

@johannesdemar8074 4 жыл бұрын

Name of this amazing track pls🔥🔥

@Tomtsu 3 жыл бұрын

Dasz radę podać mi jakieś info jakiego papieru ściernego dokładnie użyłeś? Bo niewiem jaki kupić żeby zdrapać tylko tą pierwszą warstwę a nie uszkodzić plastiku

@brownlivapping5149 5 жыл бұрын

Perfect 🔥🔥🔥👌🏻👌🏻👌🏻

@fckSashka 5 жыл бұрын

Very simple yet informative video, thank you.

@Vlad-fg5ru 4 жыл бұрын

I used a razor blade at a shallow angle to scrape all the rubber off, then 220 grit sandpaper to prep. I used normal spray paint, but it doesn't look all too good when it's dry. I'll likely go with plastidip

@tiberiusseibt1140 3 жыл бұрын

If you still need help, use "foliatec interior color spray" the black one looks very good, almost like the original tone but not rubbery and is not very scratch resistant. But you need to apply like 6 to 8 coats.... But it was worth the work!

@WeAreCarFans 5 жыл бұрын

Pěkný, jak je to v porovnání s origo? Je vidět rozdíl?

@MartinsTips 5 жыл бұрын

WeAreCarFans diky, tak ja som renoval vsetky plasty cize nevidno akurat ten cup holde rje origo farba je novy origo bmw aj ked voh vie ako dlho lezal v policke v sklade cize farba moze byt ina ako bola za nova 😂

@salkodinamitas7681 2 жыл бұрын

Is that matt color or glossy

@E46Garage 5 жыл бұрын

Ciepłą wodą i gąbką byś to też lekko zdarł. Lakiery do plastików ładnie wygląda, ale w dotyku nie ma takiej miękkości jak stara powłoka. Lepiej by było plastidipem czarnym to oblecieć :)

@audio_feelhi-fi7424 3 жыл бұрын

Mit który urósł już do potęgi....tej farby nie idzie zedrzeć gąbka i ciepła wodą. Wiem to napewno bo namordowalem się jak głupi i dopiero denaturatem i środkiem do czyszczenia EGR zaczęło się ruszać i elegancko zeszło.

@E46Garage 3 жыл бұрын

@@audio_feelhi-fi7424 w sumie po czasie zgodzę się, tylko jedne dekory dały się gąbce. Później już tylko szlifierka i papiery ścierne. Tak samo, że DOT3/4 spokojnie sobie radzi. U mnie te metody poległy.

@joshriver75 5 жыл бұрын

Wrapping these pieces with 3M 1080 matte is the way to go. Much better finished product and easy enough to do.

@spisebanan1413 3 жыл бұрын

Good video I won't be spending time replacing interior. Excellent for stage 1 weight reduction to improve road handling and free performance upgrade on 99 330i

@42069gaming 2 жыл бұрын

there is no 1999 330?

@E36andE46vlog Жыл бұрын

You should have used a soft touch remover or APC.

@69bock69 5 жыл бұрын

nice vid

@chester8486 2 жыл бұрын

I need the song name! 😂 Awesome job tho'!

@davidnichols1943 3 жыл бұрын

Someone's on that good shit

@tyburcjusz 5 жыл бұрын

Cały czas myślałem, że to znowu jakieś wideo z zagranicy, a tu proszę "lakier bezbarwny" :) proszę daj znać gdzie kupiłeś tą maszynkę do ścierania oraz farby. Masz może linki do aukcji? Dzięki!

@E46Garage 5 жыл бұрын

Maszynka parkside w Lidlu. Od poniedziałku znowu jest w promocji (11.03). Farby kupisz w każdym budowlanym. Kolor czarny mat lub Boll lakier do plastików (UWAGA! nie strukturalny tylko zwykły).

@nicksprinter3121 3 жыл бұрын

nice

@rmarci4988 4 жыл бұрын

Awesome vid, song name?

@petrbycek248 5 жыл бұрын

Příště zkus přímo plastidip .. ten má stejnou strukturu gumového povrchu jako originální díly BMW .. Tam ten rozdíl nejde vidět absolutně vůbec proti originálu. :)

@mbrunocondello 3 жыл бұрын

Top video !! Where did you get that piece that goes on top of where the phone normally goes on the centre console? Really nice !! 👌

@MartinsTips 3 жыл бұрын

hatcdo you mean, cup holder? 🙈

@mbrunocondello 3 жыл бұрын

@@MartinsTips yes - it’s perfect 👌

@davezizka 3 жыл бұрын

Sandnout to pak průhledný plastový primer pak černá barva?

@MartinsTips 3 жыл бұрын

A potom ešte nejaký priehľadný lak, aby to ochránilo pred škrabancami :)

@DameAndThatGame Жыл бұрын

Why dont ppl use plasti dip? gives the original rubberery feeling.

@DaveArrkain 5 жыл бұрын

Does it become tacky (slightly sticky to the touch) after you paint it? That's my biggest concern even though it looks great! Just curious before I do the tear down and buy the paint for my M3.

@garageqf 5 жыл бұрын

It shouldn't if done correct. Paint then clear coat it and you'll never have issues

@DowntimeMedia 5 жыл бұрын

As long as you use quality paint, and let it cure for a full day in heat it won’t be tacky at all. Make sure to use a thick clear coat so the paint doesn’t scratch right off

@class2instructor32 7 ай бұрын

O had a merc with the same softtouch crap as my e46, just soak it in water for 24hrs comes right off

@audisportcarrasco 2 ай бұрын

I used bmw black oem plastic paint and still comes off

@oresthse4668 3 жыл бұрын

My e46 had the same problem in the trim

@MartinsTips 3 жыл бұрын

99,99 % of e46 have this problem 😂🙈

@AllThingsQuick 5 жыл бұрын

Need more lighting in your videos

@hmongkieyaaj1491 5 жыл бұрын

Anyone wanted to fix interior pieces, use hot water with detergent and then scrub with a toothbrush and towel. Take my advice.

@matthewnicholas6365 3 жыл бұрын

And how does that fix paint damage?

@hmongkieyaaj1491 3 жыл бұрын

@@matthewnicholas6365 it takes the paint completely off. The plastic underneath will look better by itself. Or you can repaint it if you'd like.

@GL-xz3xk 3 жыл бұрын

@@hmongkieyaaj1491 Doesn't the hot water leech the colour out of the black plastic?

@hmongkieyaaj1491 3 жыл бұрын

@@GL-xz3xk negative. It doesn't affect the color at all. It's plastic. Give it a try. You'll see.

@marksmith1003 3 жыл бұрын

And how does that fix scratches?

@user-06-60 4 жыл бұрын

👌👍👏

@rudiger86 5 жыл бұрын

This seems a bit naughty

@adamjacobadamson Жыл бұрын

04:25 The Finished Result

@moileung 3 жыл бұрын

I thought you just need a simple sanding paper grit. But you need them fancy stuffs

@tiberiusseibt1140 3 жыл бұрын

Sandpaper takes awfully long. I recommend either scraping this shit texture off or using alcohol / acetone and rubbing like crazy. Still a ton of work tho.

@Theteese Жыл бұрын

To Much work.... My wife watched another video and got all the trim out of her E46 M3 and sprayed it with EASY OFF BAM oven cleaner, left it for 10-15mins and scrubbed it off with the kitchen scrub brush..... It came off in sheets and was all done in 5 mins...... No sanding, No sraping etc, etc.......Washed with warm soapy water and ready for painting.........

@philipgrobler7253 5 жыл бұрын

He should have masked off the silver strip, it really is not THAT difficult.

@tiberiusseibt1140 3 жыл бұрын

Also it comes out of the plastic piece with a little bending and a carefully used razor blade. It's just pressed into this gap it's sitting in.

@e36fanatics 3 жыл бұрын

Maybe he wanted it black?

@fernandosousa1714 3 жыл бұрын

Podes fazer isso no meu carro? XD

@sunnysingh8483 3 жыл бұрын

Nice but it looks like you just painted everything, I wouldn’t call that a restore

@ikeepgettinbanned5525 2 жыл бұрын

did you clear coat them? im probably going to do this. but cant find a match for the tan interior i might change the color and get a oem black cupholder since painting them might be a pain with the retention flaps. fuck, bmw really had some stupid ass ideas didnt they. never seen a car interior with a rubber coating on it that turns to shit in 10 years. even gm has better interiors imo

@Heno057 2 жыл бұрын

Bro I did the same thing, the issue is the paint doesn’t stay on the plastic well, simple scratches and it comes off :( I went ahead and bought everything brand new, my advise don’t waste time and invest in buying oem new ones

@ikeepgettinbanned5525 2 жыл бұрын

@@Heno057 i actually removed the console and sprayed it with tuff stuff and scrubbed the rubber coating off. it turned out pretty good, looks a lot newer. eventually want to get a new one without the armrest though

@eddyxodchevici2964 5 жыл бұрын

You can fix that with plasti dip

@martinez221704 5 жыл бұрын

eddy xodchevici plasti dip will start to peel off after a while trust me.

@Heno057 2 жыл бұрын

No matter what you do it will still come off, just buy new ones, that’s what I did

@bluerineimb8270 3 жыл бұрын

Why the stupid anouing music so off putting I realy don't know why people use distracting music on there vids just makes you not want to watch the vid