you’re telling me this whole time i thought my speakers were blown but it’s just loose parts? omg

Thanks I fixed my rattling! I learned it could be a lot of things, from your speaker mounts, to loose wires, loose paneling, loose license plate holder, coins in your cupholder. If it can move it, might rattle haha!

Thanks for the advice man! My door sounds a lot like yours and I thought it was blown. But I guess it’s rattling. I’m gonna take it apart and check!

Good tip, dude. I put some cheapo Kenwoods in my 2017 Mustang since the passenger side stock one died. But the adapter brackets nor speakers came with vibration dampening material so I gotta open my car doors up again. Heavier bass really makes it noticeable and I find myself skipping my favorite songs.

Wow that difference before and after was massive! My car has been rattling for years, gonna try to fix it this weekend.

Hey great video! Thought my right speaker was blown, bought new speakers and the same thing happened. Found your video and the speaker works fine when out of the soundbar, I isolated the connectors and still the same thing when I put it back in. Found the culprit, a loose dome light housing. Tightened the screws to the dome light, no more buzz. Cost me a new set of speakers though! But the new Kickers sound pretty good.

I’m listening to this video with my raddling speaker and bc of that I can’t tell the difference on your before and afters 🙃

Sometimes stuff In your door card or the plastic cover over speaker can be what’s rattling

Appreciate you my boy! I’m gone try this today, because I noticed when it was louder it was doing that.. but at lower sound it wasn’t!

Taping the edge of the speaker with electrical tape helps reduce the rattling as well.

On my first radio wiring job I secured all my speaker wire and everything with wire nuts. Keep in mind. I also have a jeep and during the summer they got wet and made bad connections and stuff so this year I put a new radio in and I redid all of the wiring, I used butt connectors for the radio and I used marine speaker wired to run under my carpet and stuff back to my 6 x 9 pioneers those I spliced with butt connectors. My speaker still rattle. I have them in 6 x 9 boxes. They truly aren’t the greatest but they work I’ve watched this video so now I’m gonna go back and see if there are wire nuts inside my box if there are I’m going to take them out and put butt splices with tape around them, maybe that should help. I’m also wiring a subwoofer. I have my RCA ran I have my remote ran. I have my positive ran I grounded my amp but it still won’t turn on even with the key on might have to figure out what’s going on there. If anyone has any ideas, please let me know.

I just ratchet strapped my two rear car doors together tight to try to minimize vibrations. Didn’t help as much as I’d hoped lol

even tho this video is recorded long time ago if anyone is watching this let me save you some time, if your speakers do rattle on low volume and high volume the same, you have to unfortunately replace them, but if they sound good and no rattling on low volume but start rattling and keep getting worse as volume goes harder that means something is definetely loose in there but low volume does not trigger the rattling and you can try and find out what is causing it and like i did fix it, hopefully someone will find this thankful.

make sure you check 100% that it is your speaker rattling and not something else in your car

I've got a soundbar it sounds normal on bluetooth and when talking happens but then soon as I play music or play anything on the tv the speakers sound half blown

respect bro

Next time try and should solder the ends and use heat shrink instead of wire nuts. There is a butt connector out that solders and heat shrinks all in one. It’s a pretty slick product.

Cars have so much plastic like the door panels and just the panels themselves, in my Hyundai it's pretty solid I didn't have any rattling and the only rattling i do have is on the front driver side door, luckily where my knee rests against the door anyway so it's a habit to just put pressure on the door label and voila no rattle, but if I don't the door lock mechanism and the handle rattle enough to notice if I don't rest my knee against it lol

thanks mate you saved my speakers

Nice video. I was about to drop 100 on a new speaker but I’ll take it apart and have a look-see

But jeeps (especially wranglers) are like the best space for a nice woofer to thump hard, I use to have a wrangler... Not with the fancy roll bar mounted speakers but did my own little system upgrade and it hit pretty hard but for some reason water was getting in to the dash whenever it would rain or car wash, and ruined countless decks it was annoying AF

My car speakers and panel rattled when my engine is on or when I’m braked at a full stop

I’m questioning in my hub’s 2016 F-150 passenger door that it’s been rattling with high bass. And I don’t have the bass jacked up! I’m like one this one speaker. That door was worked on after a crash. It’s been acting funky since. Wondering if it’s the problem. It’s like I play the same song with a high bass, no problem. Same song another day it’s rattling. Wondering if something is loose.

I've just installed 2 new speakers in my car, even though they are hard mounted to the door they rattle like crazy. It's doing my head in now. Weird I originally mounted then to the door card and they rattled less which is weird as the door card is no where near as solid as a metal door.

Wont that poly thing be flammable?

That's a big help and such an easy fix👍

Sir can you tell me how to fix zero bass in the speaker?? My speaker was in a place where there is so much dirt since the past year and now one speaker is having zero bass🙃 Please help me fix that!

it would be nice to hear the same song for better real comparison. but you do hear it is better than it was .

Do you have a video for one when it’s my driver side car door speaker? I have a 2010 Audi Q7 and I’m not having luck. I already tried adjusting the settings in the car thank u

I tryed this, but the speaker itself rattles, alltho, i cant see any loose parts

Thanks bro

Can you show wh

Does this work for a 1994 dodge Dakota sport?

Hey i have identified the issue in mine , i have a coaxial speaker , and the tweeter tower or whatever it is called had come loose. It shakes , is there any way to fix it in home or would it require reconing and stuff? I font want to get it reconed since the local shops dont do a good job and the speakers then dont sound the same as they used to.

Not me smashing and breaking the speaker hole for it to stop 😅

My speaker has 3 screws and the washers are all touching the surround part. Do I need to find and use smaller washers? The speaker rattles bad

Hey Sean that fixed the rattle in one of my front speakers...buuut what can I do if the whole sound bar is silent?

Would acoustic foam be a better solution?

Nothing rattles in my 2007 Toyota 4runner but my jeep is so bad lol

Good video

thought it was broken on my car but the just hearing just rattle

I have a 2011 Kia Rio LX that rattles and buzzes really bad even when the volume is super low! I have no idea how to even begin fixing it I need help 😩

Mine started rattling after water got into it

When i hear people car and it rattles i call it a shitty system

Air leak simple as that

Omg I now hear a rattling in my passenger door speaker! It’s so annoying. Someone will have to take the paneling off for me. Thanks for this Video anyway

Damn you’re so fine dude !

Wow ... Your stunningly handsome ...Thanks for video x

I have a 2017 Volvo V40 and it rattles like crazy on the rear left door. The bad thing is that I have to remove whole inside part of the door to get access to the speaker. So that'll be fun… we'll see if I ever manage to do it cause it is a lot of work