How to fix skipping stitches on sewing machine

Рет қаралды 88,962

Күн бұрын

Sewing Machine parts on my website
sewingmachinetipsntricks.com/
Sewing machine parts at Sewing Parts Online
shrsl.com/4fhum
Needle Chart
odessasewingmachine.com/needl...
This video is great for sewing machine beginners and professionals. I cover the 6 most common reasons sewing machines skip stitches. This applies to sewing machine skipping stitches on stretch fabric, which is usually caused by using the wrong needle in sewing machines.
You will learn how to fix skipping stitches in your sewing machine and what causes skipping stitches in sewing machines.
If your still having sewing machine problems check out my guide above, I go much more in depth on sewing machine tension problems, why sewing machine thread bunching occurs, what causes sewing machine not to stitch properly, how to clean and care for your sewing machine and making small repairs at home.
Timestamp:
00:05 - Introduction
01:00 - Needle not properly installed
04:45 - Wrong type or size needle
10:23 - Damaged Needle
17:15 - Machine improperly threaded
20:55 - Needle/hook clearance
27:24 - Timing
33:30 - Sewing machine tip
If you found value please like the video and subscribe to the channel. Share with friends who may also find value in this video.
---------------------------------------------------------------------------------------------------------------------------------
Thank you for watching our videos, by purchasing through any of the following links you help to support our channel through either direct sales or affiliate sales which we get a small commission.
These are tools I use and recommend for their durability and ease to load up and take on a service call.
Workbench Light
2200 Lumen LED light with 10X magnifying glass, 28 inch adjustable arm, and table clamp
amzn.to/3GV9OqE
Titan 50 piece torsion impact bit set
amzn.to/3GXUidW
Titan 148 piece bit set
amzn.to/3iwygFA
Titan 53 piece 1/4 inch drive impact socket set SEA and Metric
amzn.to/3vVk7oA
Milwaukee 8 piece screwdriver set
amzn.to/3GyB5Od
Rigid 2.0 Pro Gear System, 3 tool boxes on wheels
amzn.to/3X3i9OS
Rigid 18V 1/2 in. Drill/ and Impact Driver Combo Kit
amzn.to/3QxhH94
This prybar kit is invaluable for opening this machine.
amzn.to/35lKBlS
---------------------------------------------------------------------------------------
Software
Square
I use this for local billing and invoicing in my local business
squareup.com/i/OSMPROCESS
----------------------------------------------------------------------------------------------
Contribute to the cause.
If you would like to support the channel but have no need for any of the above products you can send a contribution to me through Square
square.link/u/6oSrQ5IM
Thank you and have a blessed day!

Пікірлер: 949

@RR-yh6vr 4 ай бұрын

Today's issue is skipped stitches on single knit jersey, and I just figured out the problem: I am sewing on the DOGS (degree of greatest stretch) and my machine hates me for it. Finally solved the issue after changing needles four times (using schmetz jersey ballpoint brand new, just trying different sizes), checking timing, rethreading countless times, thoroughly cleaning the machine and lubricating, using a nonstick foot... to no avail. This fix... Add tissue paper to the bottom of the fabric (against the feed dogs). All along it was the stretch of the fabric. I found your channel when this video first came out and this is the first time I have needed to troubleshoot online for my vintage Husqie machine since then. Thats how much you helped me with this old machine. Thank you so much! Just in case someone can't find a solution from this video, try to slip some thin paper or interfacing into stretchy fabric.

@sewingmachinetipsandtricks9079 4 ай бұрын

Thank you!!

@billminckler6550 8 ай бұрын

This lecture spot is ON! 👏 I agonized over skipped stitches-adjusting timing over and over. Then, I discovered #1 that I inserted the needle on my vintage machine INCORRECTLY! 😢

@pattalcott8644 3 жыл бұрын

forgot to add ... my favorite threading the needle trick: wet your finger and put behind the needle eye ... the thread will be attracted to the moisture.

@sewingmachinetipsandtricks9079 3 жыл бұрын

That is very awesome! I never thought of that. Thank you!!

@victoriamyatt1709 2 жыл бұрын

I love this trick, always works!

@wimseycrafts9965 Жыл бұрын

Wow all my years never thought of this

@TheEvie202 7 ай бұрын

Also, put a small slip of paper (index card post it) behind the eye of the needle. So much more visible and easier to thread.

@dryo1688 3 жыл бұрын

This vid has been a great help. My wife was struggling for about an hour with the stitch skipping problem and adjusting tension etc to no avail. I looked for help here and learned, change the needle (among plenty other good advice) and bingo on that tip, problem solved instantly. Just to say the material that was being sewed was a modern soft and stretchy waterproof fabric, walking trousers however really tough stuff virtually untearable. The needle plunging explanation was excellent. Thanks from people in Scotland.

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you, I appreciate you letting me know. That is awesome!! I still find it crazy we can communicate and help each other from half way across the planet.

@pixiecora2212 Жыл бұрын

Thank you, thank you, thank you! 1st of all, the quality of your lighting and close-ups is superb; beyond compare to other people's videos! I learned so much and fixed the problem I was having. Finally, the link for the needle chart was a grateful addition. Again, Thank You!!!

@jaynemosier9130 3 жыл бұрын

Love your close up videos. I think my whole problem was my needle. I was using one that I thought was fine, but had been used before. I switched out to a brand new needle and so far so good. Thank you for your information!

@madeleinecelestin7661 Жыл бұрын

Is it why the fabric is catching through the bottom

@Desertpagan 3 жыл бұрын

After "countless" skipped stitch videos, it was one of your tips that did the trick (pun intended). For years I've reached for smaller-sized needles even on heavier fabric for their penetrating ability, without having a problem with skipped stitches. However, while using a buttonhole foot (the type that uses an actual button to set the stops) on pant twill fabric, I faced 2 problems at the same time. Braking thread and lots of skipped stitches . . . Lowering thread tension fixed the braking problem . . . and your wonderful explanation solved the more perplexing problem . . . Who says you can't teach new tricks to an old dog? Sir, Thank you !!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome!!! I am happy to have been able to help! Thank you for watching and commenting!!

@sharonthornburg7809 9 ай бұрын

This was so helpful and informative! I had skipped stitches. I changed my needle and checked the placement. It was too low. Problem solved. You’re a great teacher. I learned a lot about how my sewing machine works. Thanks!! please do a video on adjusting tension and how to know if the stitch is correct.

@dianemudryk4894 3 жыл бұрын

Thank you for the great instruction....You are a really good and clear teacher.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Your very welcome. Thank you!!

@mcloud1070 3 жыл бұрын

Thanks you. I would have loved to get all these pieces of advice when I started sewing. Your video is very useful for all beginners... And the rest of us too 😄

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you for the kind words!!

@miriamtalavera5015 Жыл бұрын

Machine is Brother ST371HD. Sometimes sews just fine, then skips. Very frustrating. Thank you for posting this video.

@41hubla 3 жыл бұрын

I was looking for the needle to fabric chart you were going to put in the comments...Also I would like to say after sewing for over 50 years you forget the easy stuff. After several tangles and looped stitches. I realized after watching your video..changed the needle and oiled machine and now everything’s perfect. Thank you

@maxinegerentscher3961 Жыл бұрын

Thank you so much for sharing this video, very informative. It helped me a lot. I changed my needle after watching your video and everything works again! After months of frustration... Thanks again 🙏 stay blessed.

@oliviaitlookssoprettydavis2717 2 жыл бұрын

Thanks soooo much for this. You've fixed my issue. And YES, you made sense!

@sewingmachinetipsandtricks9079 2 жыл бұрын

You are very welcome! I am happy I was able to help. Hope you have a great day!!

@Al-jk9bp 3 жыл бұрын

Thank you for very helpful video. I have Brother machine which is almost brand new but was skipping stitches. After watching your video I was able to adjust the distance between the needle and the hook and it fixed the problem.

@dogsareawomansbestfriend Жыл бұрын

Wow. Thanks for letting me see lots of things that have shown me I need to redo and put on properly the needle.

@maiswwy Жыл бұрын

Thank you so much for making this video!! I was stuck in the middle of a project because when i changed my thread suddenly my sewing machine started skipping and making some goofy stitches, but now thanks to this video i can complete my project!

@sewingmachinetipsandtricks9079 Жыл бұрын

Your Very welcome!

@SewBlissfulMemories 3 жыл бұрын

Im having issues with my brother pe770 embroidery machine. There's times it stitches out fine but when I try to embroider a name, it will skip so much and the thread will start to bunch up and break

@fcmacken 2 жыл бұрын

This was the information I needed to fix my machine, thanks!!! Major skipping issues.

@gangadainaitram5521 3 жыл бұрын

U r doing a wonderful job. I followed your instructions n serviced my Singer Simple Saved myself dollars Keep up the good job

@tryzz8 3 жыл бұрын

please do some vintage machines.

@candyshippy2784 4 жыл бұрын

My Janome 2030 qdc B keep skipping stitches change the needle and it still skips

@force8542 3 жыл бұрын

Hi Wonderful, clear photography and simplified speech. Good job thanks to you

@sewingmachinetipsandtricks9079 3 жыл бұрын

thank you!

@Carol-mv4ly 3 жыл бұрын

Thank you so much I love the way you really explain everything.

@shirleygray7664 4 жыл бұрын

Singer Industrial 20-U

@marlawilliams6806 3 жыл бұрын

I would like any comments on this new to me machine also! 👍🏻

@elizabethdavis7657 2 жыл бұрын

I listened to what you said I needed the correct needle for the project. I changed the needle and it stitched out fine. Thank you for your wonderful help carry on.

@sewingmachinetipsandtricks9079 2 жыл бұрын

Very awesome! I am happy I could help! Thank you!!

@Clara-pr8zb 4 ай бұрын

Thank you, my needle was in the wrong way around. Now works perfect. Thank you for your help 😊

@janetruiz3372 3 жыл бұрын

Love your talk about needle sizes. Helped me out tremendously.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Thank you! I am glad to be able to help :)

@jacqulinemorrison1864 2 жыл бұрын

Hi am using a singer 20U -105 C

@adelantee 3 жыл бұрын

Thanks sir for your rich explanation, i found it very useful, my machine is Singer Brilliance 6180 and it is skipping stitches on zigzag mode.just waiting to buy a 7 mm pipe wrench to fix it according to your instructions

@user-oh3xc1wd9y 8 ай бұрын

Thank you for your excellent, detailed explanation.

@andrewhesling7875 7 ай бұрын

Hello Richard, just watched your Skipped stitches video again because I have a Janine XC33 that is skipping stitches. I always refer to your because you explain things very well and are easy to follow. It’s £100 here in the UK to have an engineer service it.

@sewingmachinetipsandtricks9079 7 ай бұрын

Thank you, I appreciate that very much! Did you get the problem figured out?

@jimhalford9239 Жыл бұрын

Thanks for the information on the machines. I learned more in 10 minutes than I could in any class on sewing.

@sewingmachinetipsandtricks9079 Жыл бұрын

You are very welcome, Thank you!

@thom-bennett-tailoring 3 ай бұрын

Yes, I am having a problem with my Brother B755 MK2. Great video, thanks for taking the time to make it.

@thom-bennett-tailoring 2 ай бұрын

I'm giving you an update. The hole in the plate where the needle goes through turned out to be damaged. New plate, perfect sewing again. Happy days!😃

@rhondaadams4013 Жыл бұрын

This is very informative. Thank you.

@Somegirl3602 2 жыл бұрын

Your video's are so thorough and clear, thank you so much...😍 I use a Janome sewing machine and overlocker.

@amandarossouw493 3 жыл бұрын

Hello there. I have a vintage Kenmore and the clutch on my machine loosens when I'm sewing. I find that when this happens my stitches skip. I don't know how to fix the problem can you please provide some insight. Thank you.

@merlenesturridge3996 2 жыл бұрын

Thank you sir i love you explain how to look out for these kinds of signs on the machine nice good job God bless you

@kittycenac5451 3 жыл бұрын

Thank you that was so helpful!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you!!

@farkalnine9398 3 жыл бұрын

Thankyou, you are very knowledgeable about sewing machines,❤

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you!!

@nrgisameer1473 3 жыл бұрын

Thank's for ur effort, appreciate it

@doughayner-pv8yd Жыл бұрын

Juki DNU-241H skipping stitches. 3:06. Love your videos.very helpful. I work with leather a lot. When stitching 3 0r more thicknesses it tends to skip stitches. Living on coastal Maine and tuff finding a knowledgeable repair person.

@liliagomez3388 3 жыл бұрын

I was wondering why my machine skips a stitch here or there. I cleaned it up it had lots of lint (got it from a second hand store) and I read the Manual for tensions and length stitches. Also changing my needle and making sure it's timing is right. Made a huge difference almost perfect but it still skips a stitch ever so often. It's a 385 kenmore 30 stitch, any suggestions would help. There is not much information on these machines.

@HD-wt8vr 2 жыл бұрын

Thank you sir for the video! I have learnt valuable lesson about the relation between the needle and the hook also needle sizes vs materialtypes. Your close-up view was soo helpful. My machine is singer heavy duty model 4411 and it skip stitches. I tried cleaning, changing needle size and foot press tension but nothing worked. Apparently the problem was the needle position the adjustment screw is in front of the machine under the head cover it doesn't go in or out but it allows the needle shaft go in all directions when turning the screw. So happy i found this video many thanks!

@Shawnne86 11 ай бұрын

This is excellent advice!! Thank you!!

@castingmynet6134 8 күн бұрын

Thank you so much for making this video! I've been sewing a long time, but I definitely learned some things here! I'm in fact, going to share it on Facebook in a sewing group. I was hoping to see you unscrew the bolt, but I do think I understand that you were talking about the Allen wrench reaching in from the left side and unscrewing it. I'm very mechanical so I'm not terribly concerned, but I'd actually never explored that area. I have a lot of sewing machines because I'm trying to start an upcycling business to support a missionary daughter, and one or two of those machines has been having some skipped stitch issues. So I will visit the obvious things of changing the needle and checking the bobbin tension and the top tension and such... But I especially was interested in the timing. I do know that you can utterly destroy a machine by trying to fix the timing yourself, so I might not be so daring on that, but my teen son is also very mechanical, and he has more confidence and courage and trying the scary things! So I'll probably give it to him to check out after watching this video. You didn't mention if, or how, using cheap thread affects the machine. Do you feel that it really matters if a person uses Gutterman thread versus using unless expensive thread from Amazon?! Do you have a favorite thread type . Also, do you feel that it's much of an issue to use say an embroidery thread at the top but a standard thread in the bobbin ? You seem like such a sweetheart, your wife doesn't really get mad at you for being in your sewing room does she? I sure hope not. But I know the joy is in the challenges of married life! I don't mind if my husband's and my son room, so long as he's not complaining about my mess! But your wife seems to be very very orderly with her sewing room! In fact, I'd love to see a tour of it. Do you think she'd be up for letting us see how she organizes things? Have a great day. God bless you!

@CatCatGun 3 жыл бұрын

Thanks for the info. The needle that i used to use was bent. Thats why it skipped a stitch. Now i have to fix the tension... thanks!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! I am glad you found the problem. I talk about tension on several different machines in this video. kzfaq.info/get/bejne/nK1gfcakv9_Kg40.html Let me know if there is anything else you need help with.

@tryzz8 3 жыл бұрын

excellent, third time watching this video.thank you Richard

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you!!

@controlfoodcontrolthepeopl5627 3 жыл бұрын

Excellent advice

@erindrake5846 Жыл бұрын

The white 1510 sewing machine timing please. I appreciate your generosity with which u give these tips! It's so frustrating to diagnose &/or adjust sewing machines. So much of a contribution to your fellow human beings! The ultimate progress comes not from demands but from reaching out to humanity. Thank you so very much!

@adekunleoluwabunmi877 Жыл бұрын

Thank you so much. All the way from Nigeria.

@dianaboa4483 3 жыл бұрын

Thank you so much! Fix my problem in seconds!

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank you!!

@theresachidothi480 Жыл бұрын

Thank you.What you are saying makes sense. My machine is industrial 20u43. When sewing cremplene material it skips terribly I was using needle DP 20 . The other materials the machine is sewing very well

@han-guksarangvlogs4483 4 ай бұрын

I never watched videos this long but this is very gret video full of informations and techniques. Thank you sir

@michaelthorpe9560 2 жыл бұрын

hi, can you give me any advice on the golden wheel walking foot os-6014 machine,, will it be any good for stitching canvas or 600d (20 oz) used in boat covers,, I was told that this machine can stitch leather,, if so,, how thick is the leather?,, I need a strong machine to start stitching heavy canvas to make a boat cover,, how old would this machine be?,, and are spare part's still easy to get?,, I have a ddl-500 and that wont touch that 600d boat cover,, in fact I broke the ddl-500 machine trying to stick it,, so I am using an old 1960's seamstress machine,, it make's it grunt,, but it stiches through 6 layers using a leather needle,, "100/18",, any advice will help me,, thank's mike,, ps,, great video,, tell me a lot about sowing machines work,, and your right about setting up the timing its a pain getting it right on the ddl-500 as well

@grzoo 3 жыл бұрын

I have a GRITZNER DURLAH model VG It is very old machine not electric my grand mother. I have no manual. I use it sewing jean and soft fabric and sewing pretty well. When I try to sewing Velcro on fabric the machine began to skipping stitches. I try to fix the problem by tighten the upper thread and the bobbin but nothing. The mechanism of bobbin is like singer 237 but don’t know if the needle is correct. Have you any idea what happen

@ellamardick2918 3 жыл бұрын

I have a JC Penny machine model 6401the thread keeps coming off the take up lever. I just had it serviced and the tech was to address the issue. I got it back and the thread is still coming off. Any advice?

@shonswu7900 2 жыл бұрын

Very helpful 👍

@CorkBouldering 4 жыл бұрын

hi i have singer 1862/1812 is late 80 Brazilian made it works with straight stitch but no luck zigzag i think needle if way far away from hook, when goes trough plate is more towards but i tried to set it using big bolt on the top but it doesn't go far enough to the back, any ideas???

@nerosapien 3 жыл бұрын

Omagawd!!! i love the tip with paper to help thread the needle SUBSCRIBED!!!!!!!!!!!!!

@sewingmachinetipsandtricks9079 3 жыл бұрын

Thank you!! I am happy I was able to help. Have a great day!!

@mmmmmruch 2 жыл бұрын

best video ever nice instructions

@elizabethdavis7657 2 жыл бұрын

Thank you, for your help I listened to what you said I needed to have the right needle for the I changed out the needle and it sewed my leather just fine. Problem solved carry on.

@sewingmachinetipsandtricks9079 2 жыл бұрын

Very awesome! I am happy I could help! Thank you!!

@ctmiddz 3 жыл бұрын

I’d also love to see a video on a thorough service of a Brother machine similar to mine...BQ1350. I don’t know how to do anything more than take the needle plate and bobbin case out to clean. Thanks!

@deannagoodman1989 2 жыл бұрын

I have a phaff 1245 upholstery machine that skips stitches..its driving me crazy since i upholster cars for a living..the screw that holds the needle in is not the original screw and the hole it goes in is a little stripped out .could this be causing the problem? Also can i get a ver small tap and rethread that hole so i can put a screw in properly and tight?.please help

@Dragon-Slayer624 3 жыл бұрын

I am a beginner, I have the Brother GX37 machine. I was making something with thick jeans. I hit my bobbin case, I pushed the wound back into place. I might have a scratched plate, I’ll use sand paper, but my stitching looks weird. I soothed the plate to stop breakage, my 4 x 4 zigzag stitch, looks weird. I’m not sure if it’s just me now noticing or if it’s missing or out of time. I was hoping we could chat and youu can help me.

@ctmiddz 3 жыл бұрын

Hi Richard, just discovered you and this video tonight. I’ve got a love/hate relationship with my new Ruther BQ 1350. Recently more hate as I’m struggling with skipped stitches and tension issues while trying to free motion quilt. I resolved the tension issues for now but am not making any progress with the skipped stitches. I’ve tried the usual but will check my needle condition and that it’s inserted properly tomorrow. I feel at least I have something new to check. Thanks for such a great video, I leaned ALOT!! Unrelated questions. My manual tells me not to lubricate my machine. I feel like I should anyway. What are your thoughts on this? Can you show me the tension discs on this machine? Lastly, do you have any experience with this machine? Opinion? Many thanks!

@lesliekotsiris5287 2 жыл бұрын

I have a old Sears Kenmore model 158.14100. I am able to zig zag stitch on cotton material but when I switch to nylon or any stretchy material it doesn't zig zag. Can you help with that? Your tutorials are soooo helpful! Thanks

@shawngarcia4584 3 жыл бұрын

Ty my good gentleman, very informative...

@sewingmachinetipsandtricks9079 3 жыл бұрын

You are very welcome! Thank You!!

@vetelaguna550 2 жыл бұрын

Hi, I have riccar mighty where the gear fall apart, and the selector for stitch is no longer working. Wondering where can I buy for that gear . I hope you can make videos for Riccar mighty gears for pattern stich

@jackbettygilbert7917 3 жыл бұрын

I have a Singer Quantum 9960 machine , how often should I change the needle, I sew quilt tops..

@joyikoro9052 3 жыл бұрын

Please Sir can EM20U33 industrial sewing machine sew leather materials? If it can, what type of needle should I get? Thank you sir.

@davidgillham5233 3 жыл бұрын

Hello I have a Singer 400 W 1 industrial I could sew Cotton 2 thickness sews good with #46 thread with 88x #16 needle. Tried to sew 2 thickness of cotton webbing would skip. I replaced the needle 88X#18 sewed great. Thank you sir.

@hannaliza2221 3 жыл бұрын

Thank you 👍

@gladtidings4all 3 жыл бұрын

I have a singer model 201-2 and I would like to find a magnifier lens I could screw to my machine needle! Do you sell anything like this?

@bw5762 4 ай бұрын

I have a brother project Runway special edition CE1125PRW. I keep getting skipped stitches. Mainly on the top. I have checked the top thread tension and rethread the top thread. I need some help

@calledtobeadaughterofzion892 Жыл бұрын

Hello. I have a brother LX3817 and I have re done the first 4 parts you gave. It could be #5. It seems like it’s sewing with no problems but when I stop it’s all loose. Please help

@tinaradosevich8772 3 жыл бұрын

Europro 375. I've changed the needle and re-threaded both the top and bottom. It sews fine when sewing the quilt top but as soon as I begin quilting, it starts skipping switches. Not sure what to try next. It's worse with the walking foot but happens with a regular foot too.

@edwardharvey5839 2 ай бұрын

This was very helpful. I am stitching upholstery for my vehicle and the machine started to skip. This video showed me that it's the spray glue and the needle is dull. I will clean and check the hook, and get some new needles. It might be a good idea to use the spray glue with the layer of sponge after all stitching is completed. I also like the way you have organised the thread and tools in the area. Perhaps you can let the audience know where you bought these that organise everything.

@corteltube 2 жыл бұрын

I have a juki industrial 9000c…I am having issues on stretch fabric…more on some stretch fabrics than others…I am using a groz bekert 80/12…ballpoint. Should I be using a smaller needle perhaps ? I have zero problems on any other fabrics.

@cremildacarrasco8224 2 жыл бұрын

Kenmore 385 and making regular stitches and long stitches, I've cleaned it, it's properly threaded I just don't know which is the right needle for cotton blend the package says universal needles... please help!!!

@sandysanchez3131 2 жыл бұрын

Hi, thank you for your videos. I have a Foromatic Zig Zag Morse. It’s a heavy machine so before taking it out of the table and downstairs to my car, I wanted to get an idea of what was going on. Once in a while I have extra thread from my bobbin on the bottom side of my fabric. And, my machine is hesitating to run now when I press the pedal. So seeing your video, I am wondering if it needs timing. ??

@boxgirl51 2 жыл бұрын

Bernette 77. Skipping stitches while straight line quilting using dual feed on this project. New needle, new thread, new bobbin. The machine did not do this on the last thing I quilted. I do clean my machine on a regular basis. Thanks!

@bettyhodgesarnett7021 Жыл бұрын

i'm using a Janome 1600p sewing machine on a fairly thin quilt. I started with a 12 needle and the machine is skipping stitches. Tried a 14 needle and it seem worse with skipping. Hope you can help me

@tararice5172 3 жыл бұрын

I have an ancient Dressmaker De Luxe model SWA-2000. It skips while zigzagging only, which I think is the timing, but I can't figure out how to adjust the timing.

@rosiewilson374 2 жыл бұрын

I have a vintage Vogue Stitch model 805B. I have no manual for the machine but It is not pulling thread through. Your video is helping me a lot.

@sewingmachinetipsandtricks9079 2 жыл бұрын

Hello Rosie, I am happy to hear my video is helping you. I believe that is a side load bobbin, make sure the flat of the needle faces to the right into the throat of the machine and it is all the way up. The needle will thread left to right. If you need more help after watching the video let me know.

@judythelupie5893 2 жыл бұрын

I am a beginner. Thank you very much

@awinter4831 2 жыл бұрын

hi i have a bush 450/2466 i put it away for about 3yrs and did not use it i got it out6 weeks ago and i can not get it to sew it was perfect when i put it away but it just bunches up underneath would it be possible for you to show how to thread this or is there a diagram sheet on all of this kind regards a wints

@jorgesaenz455 3 жыл бұрын

Good job..

@davidkeetz Жыл бұрын

singer 533 - I bought it not working and refurbished it, installing new gears and belts. I adjusted the hook timing and I had no problem sewing on normal fabric but I'm having a hard time with vinyl fabric - I'm using a leather needle and it's having a difficult time feeding the fabric through - I'm guessing it's an issue with it not feeding well but I'm getting holes in the skipped stitch, so the needle is dropping correctly every time but not threading on every stitch - skipping maybe once every ten stitches

@morganwood1 2 жыл бұрын

Hi! I have a Singer 328 Style-O-Matic. I love it… it works for everything except quilting… when I put on the walking foot it skips either a lot or a little EVERY time! I’ve cleaned the machine, re-threaded, tried quilting, microtex and topstitching needles - all brand new)… Also I’m sewing over some appliqué and the background at the same time… it seems to do fine when I’m on the appliqué for the most part, but when I go back to the background (so just background, batting and backing) it skips like crazy.

@kat-iq8us 4 жыл бұрын

how would i go about fixing a machine out of time? i’m not able to go get it fixed or get a new one and i’ve tried all of the other tips mentioned. using a brother XL-2600i

@sewingmachinetipsandtricks9079 4 жыл бұрын

Hello Kat, I would love to help you, go to my website and contact me through the form or my bot and I will help you figure out your problem. odessasewingmachine.com/

@liwag3172 2 жыл бұрын

Hello, thanks for the very informative video. I have an industrial singer 95K40 that won’t saw after the needle hit the plate when I accidentally pulled the fabric while sawing.

@sewingmachinetipsandtricks9079 2 жыл бұрын

Could be several problems, the most common on this machine would be the needle bar getting pushed up after a hard direct hit on the needle plate.

@sunaadhageethamulu5067 3 жыл бұрын

Thank you very much.... very much

@mirtaPR Жыл бұрын

Help I have Brother PQ 1500 skipping stitches when I free motioning sew, I’m using cotton fabrics batting thread put in new needle cleaned area under Bobbin Using the HLX 5 needle recommended. Still skips 🙄😩😡

@jackbettygilbert7917 3 жыл бұрын

Thank you

@sewingmachinetipsandtricks9079 3 жыл бұрын

Your very welcome!

@kathrynhooper2925 3 жыл бұрын

I have a White Quilter's Machine 1740 and I am sewing on a baby quilt. The top is flannel and bottom is minky. I am zig zagging binding and my machine has stopped stitching. Needle goes through but it is not stitching. I am using 100% poly thread and 14/90 ballpoint needle. Do I have a timing issue?

@jodiegrace2849 3 жыл бұрын

I have a pfaff passport 3.0 which has just started skipping stitches. I was doing buttonhole stitch and was using an Australian product called matildas own poly fuse to stabilise the stitches. I have rethreaded, redone bobbin and put in new needle. It’s a brand new machine I have had no problems with it hope you can help. Jodie Melbourne Australia 🇦🇺

@bethharper9254 5 ай бұрын

singer 20ux143 industrial. I'm zig zagging a rag rug. I had problems and my husband replaced the race and bobbin holder. He got the machine to pick up the bobbin thread and its working now, but still skipping stitches

@billrochman3965 2 жыл бұрын

Stumbled across your channel and watched the video but still having problems with skipping. Hoping you can help. I'm getting multiple multiple skipped stitches in a row. It will stitch a handful correctly then miss all the rest. Like just a straight line of tight thread. Tried multiple different test pieces of other materials and it works fine. Even tried a fabric much stretcher and no problem. It just seems to be this one shirt, its kind of like a wick away swim shirt. I'm sewing slowly and have adjusted thread tension. Also have tried brand new ballpoint needles, stretchy needles and general purpose 70/75 needles. This happens on a straight stitch and straight stretchy stitch. Using polyester thread. I hope you can give some advice, thanks.

@carolynhickman7474 3 жыл бұрын

I'm using a Baby Lock Quilters Choice Professional, about 10 years old. The stitches occasionally skip when I'm free motion quilting, particularly when making a curve. I have just had it serviced and it's still skipping. I took it back to the technician, he free motioned for 2 or 3 minutes, and it worked fine for him. Back home, still skipping stitches. I'm using a new needle and Egyptian cotton thread.

@sewingmachinetipsandtricks9079 3 жыл бұрын

Hello Carolyn, It is hard to say for sure with out looking at it but here are my thoughts and what I would look for. Sounds like it could be a difference in how it is being operated. If the needle gets pulled or bent away from the hook as it is sewing that could cause it to skip stitches . If your needle is to small for the thickness of fabric being used you can have needle deflection, which is the needle slightly bending before it penetrates the fabric. If it deflects away from the hook it could cause skipping. If your curves are to the left the needle would tend to be pulled away from the hook, to the right would pull it to the hook which could cause the needle to get caught in the hook and break. When free motion quilting, moving the fabric at the right speed, for the speed of the machine is critical, moving to fast can not only cause longer stitches but also pull on the needle as it is sewing and cause skipping and possibly needle breaking. I personally suggest never using anything smaller than a 80/12 unless sewing extremely thin fabric such as silk or something similar. For quilting I would recommend a 14 to 18 depending on the thickness of fabric. Also take notice when you are sewing if it feels like the needle id slightly pulling on the fabric, that is a sign of moving to fast for the speed of the machine. What size needle are you using?

@elizabethdavis7657 2 жыл бұрын

I am sewing with a juli TL2020 , leather with three layers of batting the front statues out fine after a couple inches on the backside it starts to jump stitches then it picks the stitches up fine. I have tried different links also slowing down giving the machine a chance to do it job. The machine is new I received it yesterday in the mail my first day of using it. Thank you for any help that you can give me regarding this matter because I do make a lot of leather handbags. When I saw other fabric it appears to fine.

@sewingmachinetipsandtricks9079 2 жыл бұрын

I believe by your other comment you were able to fix the problem.