How-to Fix Snapper Mower Oversteer ― Permanently and Cheaply!

Рет қаралды 14,844

Күн бұрын

Fixing the Snapper Mower's over steer problem. Today I fixed the dangerous overseer problem on my Snapper Mower, and show you how to do the same. All measurements and materials called out.
For the record, the camera fell early in the video when i was moving the mower, and cracked the screen protector. You can see weird reflections on the left side after that happened. I believe I learned this technique from Jim Jackson's channel, but for the life of me I can't remember...
Some more videos about the zero turn including the Altoz TRX 660i:
Natalie Tests an Altoz TRX 660i -- • Natalie Tests an @Alto...
Oil Change, Air Filter, and Engine Clean on Simplicity Zero Turn -- • Oil Change, Air Filter...
How-to Level the Deck on a Simplicity Courier Zero Turn -- • How-to Level the Deck ...
Simplicity Courier 52” Zero Turn Blade Change [Part 1] -- • Simplicity Courier 52”...
Simplicity Courier 52” Zero Turn Blade Change [Part 2] -- • Simplicity Courier 52”...
How-to Fix Snapper Mower Oversteer ― Permanently and Cheaply! -- • How-to Fix Snapper Mow...
Mower Maintenance [Oil Change, Check Steering, and Flat Tire] -- • Mower Maintenance [Oil...
Starting the Mower -- Scouting the Vineyard -- • Starting the Mower -- ...
Support Planet Mojo -- mojoprairie.com/support/
Please Share, Like, Comment, and Subscribe!
www.paypal.com/cgi-bin/webscr...
Click here to subscribe ― / @planetmojo
Our Oak Savanna Website ― mojoprairie.com
The Modern Homesteader - www.bitchute.com/channel/66kP...
Thank you for watching Planet Mojo and have yourself a great day!
#SnapperMower
#SnapperSteering
#Snapper

Пікірлер: 27

@MrUtubeobia 3 ай бұрын

Glad to find out my Snapper is not the only one with this problem. I ended up putting a few blobs of mig weld on the arm where it hits the attachment plate. That keeps it from travelling too far. But, now that I see this fix, I have something else to try, if my fix fails.

@erichearn7130 4 жыл бұрын

Great Job Again! I am not a homesteader , but your videos sure inspire me. I am working on getting off of the procrastinators list.

@PlanetMojo 4 жыл бұрын

Thanks Eric! Homesteading -- or even just moving to the country -- involves more work, but it certainly saves on gym fees 😊

@rondj1965 Жыл бұрын

I had this problem with my rear engine Snapper. Excellent video and great inexpensive fix. Thanks.

@PlanetMojo Жыл бұрын

You are quite welcome!

@hockey98550 2 жыл бұрын

Thank for video! I was having over steer, and did something similar, but idea worked! Turning radius a little smaller but it doesn't jam up.

@PlanetMojo 2 жыл бұрын

Glad it helped!

@gabe5946 Жыл бұрын

Very impressive buddy!!

@PlanetMojo Жыл бұрын

Thanks you Gabe! 😊

@joes1280 3 жыл бұрын

Thanks this worked for me great

@PlanetMojo 3 жыл бұрын

You're welcome!

@SamlonHoldfield 4 жыл бұрын

Congrats. very cool fix. So easy, when you know what to look for. Have you taken it for a spin yet? Curious if the turning feels any different. Well done. Thanks.

@PlanetMojo 4 жыл бұрын

Thanks Samlon, no I haven't taken it out yet -- had to be out of town for a couple of days. I'll be taking it out today and hope to get some video.

@robertruprecht5412 2 жыл бұрын

Thank you! Perfect

@PlanetMojo 2 жыл бұрын

You are quite welcome Robert!

@kelvinshoebrook764 4 ай бұрын

What about the Bushings

@HappyHands. 2 жыл бұрын

i have a 70's model and there is no notch cut out of the turn stop. Clearly some late model snapper designer was trying to decrease the turning radius without re-engineering the steering assembly. Seems like putting a connecting rod between the two steering arms and removing one of the tie-rods would of been a better solution. That would of kept the front wheels parallel in the turn.

@PlanetMojo 2 жыл бұрын

I agree.

@PlanetMojo 4 жыл бұрын

This video is a response to a video by @Jim Jackson where he describes the fix but does not actually do it. Hope it helps anyone who owns one of these machines! kzfaq.info/get/bejne/mcBnYNeG0NzLfKM.html

@runamuckretreatmccarthy1554 5 ай бұрын

I just picked up one of these mowers and am having a different steering issue. The wheel just let go, it spins freely and the tires don't turn at all. In all of the steering repair video's I've found, this is the only one that has the same steering mechanism. This mechanism seems pretty straight forward - no rack and pinion, etc... I'm just trying to figure out what "let go"' before I tear it apart. Any ideas on this?

@PlanetMojo 5 ай бұрын

Never heard of that one before, but it should be pretty easy to find. Good luck!

@jophillips2868 2 жыл бұрын

What is the tool set you were using.

@PlanetMojo 2 жыл бұрын

A Craftsman 12 pt. set. Not sure they make them any more...

@larrysmith9359 2 жыл бұрын

Great fix, but what has worn out to cause this?

@PlanetMojo 2 жыл бұрын

Nothing. They are built that way 😐

@larrysmith9359 2 жыл бұрын

Mine does not do that. I have had two rear engine Snappers and neither one had this issue. Had one with bicycle steering until 2014, then bought a new one.

@davisrockey 2 жыл бұрын

The plastic bushing are worn out.. They sell a kit but why keep buying the plastic bushing?