🔇 How to Fix Squeaky Floors 🔇 | Squeak No More

🔇 How to Fix Squeaky Floors 🔇 | Squeak No More | Carpet and Hardwood Floors

Рет қаралды 6,766

3 жыл бұрын

If you want to fix squeaky floors, there is a DYI project that you can take on. With the help of Squeeeeek No More , you can reduce or eliminate squeaky floors.
You can buy the kit from www.squeakyfloor.com/

Пікірлер: 13

@yvettegordon9028 2 жыл бұрын

Where can you purchase this kit. I live in Canada.

@DadHacks 2 жыл бұрын

Either try one of your local Home Improvement stores or order off Amazon Canada. Here’s a Amazon CA link: www.amazon.ca/dp/B01ENDOPQ4/ref=cm_sw_r_cp_api_i_TEFB52NB6W2Y9NZ9RWRR?_encoding=UTF8&psc=1

@Fireman_2841 2 ай бұрын

If it doesn't fit the bottom bar, will it still work? I feel like if it doesn't fit the bottom bar, it won't work.

@DadHacks 2 ай бұрын

It has to be able to drill down to the bottom joist, if it can’t connect to that, then it can’t hold the floorboard still

@ankitkulshrestha3633 2 жыл бұрын

Why have you put on so many screws if I may know?

@DadHacks 2 жыл бұрын

Depending on the noise, maybe only 2 or 3 screws will do the job. I used a lot of screws because I was trying to get the floor board really tight to the joist, to eliminate the noise. but unfortunately it didn’t matter that I used a lot (maybe 20 to 30 screws, I lost count), the noise couldn’t be eliminated

@DadHacks Жыл бұрын

Nope. I haven’t notice any difference,better or worse

@DadHacks Жыл бұрын

It ended up being about a 6 foot linear area for the screws. How did that make the noise worse?

@DadHacks Жыл бұрын

Interesting… it’s almost like that’s exactly what I did at the 1:59 mark in the video. Did you even watch the video?

@DadHacks Жыл бұрын

@@laredotransparency129 I started a pilot screw in the middle, then I went 16 inches to each side of that screw. And if you have trouble counting, that’s 3 joists.