TG for this video. Drove all day, just parked to run an errand and this happened. So glad you posted this.

I have been driving a 2020 Cascadia for a little over 3 yrs now and it does that about once a year. I've had the interior cab light stay on b4 and had to unplug it. When I plugged it back in it worked fine. I've had that happen about 3 times. I've also had my A/C stop working while driving 2 or 3 times. I talked to the owner about it and he said it was a common problem with these trucks. If I'm ever able to buy my own truck then I will NOT buy 1 of these! The old freightliner were better b4 all the electronic BS!!

I’ve had that same issue, I don’t have the kill switch on my truck so I had to disconnect the battery and it work

I swear this helped so much, going thru it now 😂

Tried the kill switch for one minute, didn't fix it. Tried for twenty minutes, didn't fix it. Tried for five minutes, fixed it 😅

Thanks bro you've helped a lot of drivers,including me 👍

You're a hero man. I waited about 15 seconds

God Bless You, this works. I have knowledge about that battery switch, but I keep it off 10-20 seconds, a good 10 min. off position overrides the errors

Just saved my day, appreciate it thank you for your great video

Yeah man, I fixed it! Thanks! Although my Cascadia, 2022 does not have that power kill switch, so I used the green power button on the invertor inside of my sleeper. Thank you for this video!

Cascadias are pos, dealing with this now myself, thanks for the info

Thanks bro. Happened to me after I shut the truck off in reverse, also was starting and turning off the engine a lot during the day

Just had that happen. Killed the truck for 10 minutes didnt disconnect anything. I dont have a kill switch and it worked.

it works just turn off the main switch for 5 mins and it will work fine . thanks a lot man

My 2023 just did that thanks for sharing info

Same here. First time it did that, very weird, indeed

Thank you 😊

I've had this problem a couple times. I've only had to kill batteries for 5mins. I have the 2021 also. Had a 2020 before and everything was wrong with it except this which is very surprising lol.

Happened to me today waited 5 min and it worked.

Thanks god bless you 👍🙏

Appreciate man you save my day its work thanks a lod brother 😊

Saved my butt! Thanks

Just happened to me. Waited 5 minutes and it worked.

My Schneider cascadia just did it too...waiting 15 min now...thx

On the battery terminals there is a ignition protection fuse that burns out that needs replacing that’s what’s causing the no start with that stalker code

Thank GOD

Same issue right in the fuel island.😂

Thank you man !!! It’s working!👍👋💯

Thanks friend. It worked.

U can also shut inverter off for 5 min it helps

I own s 2023 model, this happened to me yesterday, I was freaking out. What in the world is a stalk switch?

Thank you very much, it works

These solutions are easier for people but never for me

very helpful

Just turned the power off hopefully this works

Thanks 🙏🏽 So Much

Yoooo this works!!!!

The latest in a list of electrical glitches. Right stalk switch error Driver door switches quit working Front dome light going on and off

Didn’t work for me

all i did was turn off my truck, remove the key, open the door, close it, put the key back in the ignition, turned it, and it fixed itself lol

I only have to wait 5 minutes,,no power shutoff, but turn off key and remove,open and close door wait 5,,should be good,2022 cascadia🎉

Just happen to me again 😢

Didn't work for my truck

My 2019 same can’t solve it

2019 has similar issues

My 2022 does this. Completely random. Annoying.

These new trucks suck

Get the hell out of the way man…