How to Fix Stuck Propellers on Mavic Clone Eachine E58 (aka SkyQuad, QuadAir, AeroQuad, Drone X Pro)

Рет қаралды 61,781

3 жыл бұрын

👇 If you found this video helpful, you can support us by buying products on Amazon, AliExpress, Banggood or Spreadshop via our affiliate links below (we get commission):
👕 Reflect your hobbies on your clothes:
rc-toys-aventura.myspreadshop...
▶ Amazon:
1. Eachine E58 Drone: amzn.to/3Rexryy
2. Spare parts: amzn.to/3FBthwB
3. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): amzn.to/3DNh4DG
▶ AliExpress:
1. Eachine E58 Drone and spare parts: s.click.aliexpress.com/e/_DmQ...
2. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): s.click.aliexpress.com/e/_DCo...
▶ Banggood:
1. Eachine E58 Drone (aka SkyQuad, QuadAir, AeroQuad, Drone X Pro, Skye or S168): www.banggood.com/custlink/3GG...
2. Spare parts: www.banggood.com/custlink/m3K...
3. Regular and high-capacity batteries (500mAh, 850mAh): www.banggood.com/custlink/DDm...
📺 Related videos:
All Eachine E58 Drone videos here: • Mavic Mini Clone Eachi...
In this video we show how to fix one of the propellers on Eachine E58 Drone (aka SkyQuad, QuadAir, AeroQuad, Drone X Pro, Skye or S168) which was blocked by sand particles entering the gears in one of the arms of the drone.
This video will help you answer the following questions:
Why the Eachine E58 Drone propellers get stuck? Why the Eachine E58 Drone propellers stop working? Why the Eachine E58 Drone propellers stop turning? How to fix the Eachine E58 Drone propellers? This video may apply to INPORSA Drone.

Пікірлер: 79

@RCToysAventura 2 жыл бұрын

@Nothing-ib3sk 3 жыл бұрын

Tq for the video my drone motor was broke like that and u help me really much bro.Now I can play my drone back😆😆😆

@lidiatavares4334 2 жыл бұрын

Muito bom já arrumei

@ChiSokchea Жыл бұрын

Good video,bro

@valshaev1145 Жыл бұрын

Cool!

@ameer2349 Жыл бұрын

I'm trying to open up my motor it looks exactly the same except it has a cover that doesnt have any screws any idea how I can open it or clean it without opening it?

@travelsuperyoutubechannel9474 2 жыл бұрын

Nice

@EasyOne 3 жыл бұрын

good

@Silveky 3 жыл бұрын

Hi 1st and can do do a range and night test or have you done that

@RCToysAventura 3 жыл бұрын

test ranges are available in youtube, this drone being small is not good for flying long distance from controller, better keep it close

@BRRC2019 2 жыл бұрын

Hi we help me. E58 and Q20 platinum Drone this is same arms and wind ang motors. Tnx

@teehee4422 3 жыл бұрын

Hiya! Please help... One of my drones *motor* is not working. I checked if their were materials that keeps it stuck - but no. Please reply💗

@RCToysAventura 3 жыл бұрын

check if you get current from wires that go to the motor, and if there is resistance on the motor, based on results you will know what is not working. you can also check if the axis of the motor is rotating easily, if not, try applying some oil.

@islamsirajul6675 2 жыл бұрын

Hi brother i bought it yesterday and i got a problem, the problem is my Drones front 2 motors working slowly can you help me please?

@RCToysAventura 2 жыл бұрын

have you done factory calibration on a plane surface before flying? Try a well charged battery. Check if there is dirt in the gears, clean it, try to lubricate the connections between the blades of the propellers and the the axle, check if the gear pins sit well in its place, check my other videos in the E58 drone playlist for similar topics. But if it turns slowly but flies well, there is no problem, when flying it applies higher speed and the rotation of motors becomes more balanced.

@keystonedrone-zone8031 2 жыл бұрын

by trying to keep the sand out, you covered all the cooling holes, so the sand wont keep the drone from flying, the heat and the motors burning up will.

@RCToysAventura 2 жыл бұрын

yes, I have mentioned that in my previous videos, and it was an experiment, and the conclusion is that it does not affect the motors at all, they are too small to overheat as they do not emit too much heat and there is still enough air flowing from propellers through axle holes. The only holes that should not me covered is at the bottom of the drone where the wifi and camera circuit is located, this one does get overheated and wifi signal becomes unstable.

@cappucinobeng4473 3 жыл бұрын

hi bro did u know what 's cause 1 motor of my drone keep spining without switch on the button i hope u read my comment ; )

@RCToysAventura 3 жыл бұрын

never encountered that before, try to reset the drone, remove batteries, do factory calibration as shown in my video How to fly Eachine E58 drone.

@mohammedaliwan188 28 күн бұрын

My brother, peace be upon you, I have a SJRC F11 that fell to the ground. Dirt entered the rear wing and the wing stopped. I filtered the wing from dirt and dust and it did not take off again. So what is the problem with the rear take-off? I replaced the two rear wings and the same problem and it did not take off.

@RCToysAventura 22 күн бұрын

Have you installed back the propellers correctly. You need to put them back in the same way they were installed. Check my E58 playlist to check how the propellers should be installed back correctly. If you switched the propellers, it wont fly up.

@Skillz2135 2 жыл бұрын

Hi, just got my drone, I go to take off and my front right motor spins a very slow speed, compared to the rest of them, and will drift to the right and not lift off the ground, I have tried replacing the battery with a new one, can you help me please

@RCToysAventura 2 жыл бұрын

Do you perform factory gyroscope calibration before you fly? It may be bad, the drone may think it is leaning and thus decrease speed of one of the motors. Another option is to check if there is anything interfering mechanically with the gears under propellers inside of the drone arms, check my videos on how to calibrate this drone and clean gears in the E58 Drone playlist. In one of my calibration videos I apply factory calibration on my drone on the inclined surface and some of the propellers stop even rotating. The factory calibration needs to be done on plain surface.

@RCToysAventura 2 жыл бұрын

also, if you replaced propellers, putting them incorrectly may cause the same problem.

@misi4782 2 жыл бұрын

Hello, any idea how to fix too loose arms? They fold and unfold too easy.

@RCToysAventura 2 жыл бұрын

may be you forget to put back the rubber rings that come on top? you can try putting extra rubber rings.

@ifraaxahmed4086 Жыл бұрын

Hi my problem is the title of the video so is it fixable if it has a burn mark E59 drone cooligg

@RCToysAventura Жыл бұрын

there are spare parts you can buy to replace the broken ones

@dextertreis3726 Жыл бұрын

How do fix the propeller inside of the blade

@flybetoven5102 2 жыл бұрын

Thank you! One of the wings did not work, the little plastic gear that makes the blades spin is worn out & wont catch anymore, could I buy parts or?

@RCToysAventura 2 жыл бұрын

yes, there are parts, you can buy a whole arm, check the links in the video description

@genesissalve171 3 жыл бұрын

Hi my drone cant take off its stay only on the ground what should i do?

@RCToysAventura 3 жыл бұрын

did it happen after you reassembled the propellers? if so, check if they have been installed correctly. I have a video on how to install the propellers in the right directions. You can not put them randomly. Also check if your battery is good.

@DuxMundi27 Жыл бұрын

i checked all wires , its not stuck etc but front left propeller just wont fly it spins but stays low it also stops before others

@RCToysAventura Жыл бұрын

try to reset factory calibration and try fully charged battery, check the voltage on the wires when it spins, check if there is debris in the gears.

@damianboy20 3 жыл бұрын

Hi bro. My drone is working in all side batter 😃but it didn't connected with my mobile phone😟. When i open my phone or another phone the drone wifi address didn't show.😧😨😩plz help.

@RCToysAventura 3 жыл бұрын

sometimes you need to wait, it may take time to detect the connection

@tsuruko7798 3 жыл бұрын

hi, I'm experiencing some problem on my drone, the first time i play it at outdoor and indoor, it rise up almost 2 metre high, but after that it can rise up high and even i pull the up throttle the drone keep the same height which is 15cm high only. may i know what is the problem and please advise. thanks.

@RCToysAventura 3 жыл бұрын

you may start loosing altitude or feel like the drone goes down when the drone gets low on battery. Another reason could be the remote control stick being too sensitive, you may think you pull it up but in reality you pull it a bit to the right or to the left, so the drone does not react to go up. The wind can also have affect. Also check the battery on the remote control. Or try to control the drone with a phone and see if there is any difference, this way you will be able to understand if there is a problem with the remote control or with the drone. Also before any flight, perform the factory calibration by pulling both remote control sticks in the south east direction.

@JAJrPhotography 3 жыл бұрын

Does this work for the E88 Drone?

@RCToysAventura 3 жыл бұрын

have not tried this drone yet

@JAJrPhotography 3 жыл бұрын

@@RCToysAventura it’s pretty similiar to the E58, just a bit fatter i guess

@rgubzgubac2898 9 ай бұрын

Right rear Dynamo not functioning. Can you help me to fix it?

@RCToysAventura 9 ай бұрын

Check if there is debris in the gears, or rust in the motor, or wires are disconnected. Check if there is current in the wires going to the bad motor when all motors are on.

@johnsaguisi165 5 ай бұрын

Hi Why is your camera more hd?but mine is blurred 😢

@RCToysAventura 5 ай бұрын

These drones come with different camera options, also this model has a lot of similar clones whose cameras are worse. Also, to keep in mind, recording directly to the phone will result in lower quality videos, recording to an SD card inserted into the drone will result in better quality videos (if the drone has this option).

@Nothing-ib3sk 3 жыл бұрын

I subscribe ur video for the information

@francisezekielrufusbartels1718 3 жыл бұрын

My E58 drone mother board got fried. Can it be fixed?

@RCToysAventura 3 жыл бұрын

never had this problem before, but repair costs may not be worth it, as the drone itself is cheap.

@aylo_playz5716 Жыл бұрын

my drones motor works part time and squeals whenever i take off and it crashes? whats wrong with it.

@RCToysAventura Жыл бұрын

There should be dirt inside of the propeller gears. Or the gears started to play around due to tear and wear.

@aylo_playz5716 Жыл бұрын

@@RCToysAventura Ok thank you, ill take it apart and clean it out i hope it works.

@Lalo-fl5ot 2 жыл бұрын

Help my motor is not working I opened it and the white spinning part is not spinning freely what do I do?

@RCToysAventura 2 жыл бұрын

if gears not spinning check if there is any dirt, small stones, sand in between. If the electrical motor is not turning, try applying oil inside, also check if you get power going to the motor too.

@maniak5019 2 жыл бұрын

I have the same problem

@Hsebyyyy 2 жыл бұрын

Woh can I put propplers corect

@RCToysAventura 2 жыл бұрын

check my other videos about this drone where I explain how to do it.

@bangsailromano4790 2 жыл бұрын

Hello that's was cool when I watch the videos but I really want a drone but I can't afford it I don't have enough money to buy that I wish I have a drone🙂

@Nothing-ib3sk 3 жыл бұрын

Bro my drone internet was really slow when it was far from me.But when first time I play the drone the WiFi was fine?plz help me😔😔😔

@RCToysAventura 3 жыл бұрын

video that comes from the drone via wifi gets interrupted, it is normal behavior for the drone.

@gearbox9900 Жыл бұрын

all 4 motors work while its upside down but when its right side up only 2 work

@RCToysAventura Жыл бұрын

Try to apply factory calibration, when you turn the drone the gyroscope sensors send different signals to the motors. If the gyrospope is out of balance, it may not turn the motors at all like I showed in one of my videos about how to perform factory calibration. If not, look for mechanical problems in the gears. The pins of the gears may be out of place. Dirt or sand particles may impede the rotation of the propellers.

@dxrgaming8428 Жыл бұрын

hi brother my drone is not showimg the connection of camera in wifi settings

@RCToysAventura Жыл бұрын

You connect your phone to the drone via wifi signal emitted by the drone first. After the connection is established, you launch an app that should recognize the drone and then the app will get the video transmission from the drone. If you are not using the right application, check my E58 playlist where I review different apps for this drone.

@dxrgaming8428 Жыл бұрын

@@RCToysAventura okay but i think my camera board is damaged

@edgarprasquita116 3 жыл бұрын

my e58 drone motor got wet qnd it works butthe one got wet got slower

@RCToysAventura 3 жыл бұрын

probably debris got inside, or rust built up inside of the motor, or there are drops of water mixed with grease which causes more friction in the gears. I would advise to disassemble the arm that got wet and clean it.

@dextertreis3726 Жыл бұрын

I am having a problem with that

@dextertreis3726 Жыл бұрын

On anpro

@islamsirajul6675 2 жыл бұрын

Bro my drone 1 motor and propeller not working plz help me plz plz plz😢😢😩I have this drone

@RCToysAventura 2 жыл бұрын

a few things to check: dirt in the gears of the propeller, loose gear pins, stuck motor due to rust, broken wires, detached connectors, bad calibration could cause that too, so apply factory reset, bad battery could be the reason too.

@JohnyTap 2 жыл бұрын

.........👆👆👆 consult this technical support for any complain, request or enquiry. Thank you!

@jesiesamaniego2230 3 жыл бұрын

Where to buy a screwwwwwww

@RCToysAventura 3 жыл бұрын

Check the description under this video, you can find links where you can purchase screwdriver sets and screws very cheap.

@bannerman100 2 жыл бұрын

E58 screw sets are on Aliexpress

@johnleifernandez5377 2 жыл бұрын

Isn't work bro

@JohnyTap 2 жыл бұрын

.........👆👆👆 consult this technical support for any complain, request or enquiry. Thank you!

@H20Luxury Жыл бұрын

Hi I need help my bottom left wing is not working please help

@RCToysAventura Жыл бұрын

check if there is any dirt inside the gears of the propeller, or rust in the motor, you may need to replace the the gears or the motor. Or check the connections if it does not turn on at all.