Hey man I literally would have gave up on my bike a long time ago if it weren’t for you, every problem I have I know you’ll have a video on it! Thankyou

You definitely know what you are talking about. This is my go-to channel when I'm doing work on my bike

As soon as people start thinking about this problem this video comes out, you stay on top of things my friend. God bless.

Love your down to earth explaining how to do things and what to look for.that even us dummies can understand.keep up the good work!!

Thanks for making this video. I had the problem where the chain was jammed in side the motor. I was able to get the chain unjammed with just my fingers. If it wasn't for you I'd probably have to bring my bike to the repair shop!

Thank you.i gave up on my bike and I just found your video today after watching over 30 vids.thank you for explaining every detail.

Thanks for your excellent helpful help and your willingness to help others my chain was too loose kept jamming at the sprocket fixed now

Perfect advice and useful. Thanks!

I like that 2x4 trick and hammer, Never thought of that really cool and simple thanks for that tidbit. I'm sure in the future I will need it, Nice video.

so helpful man, so much thanks for this video. my clutch wasnt releasing, this video answered all my questions

Great video and great tips!:)-John in Texas

Thank you so much for taking the time to make this video I’m trying to figure this out and there’s plenty of information you gave on this video that I will use

THIS HELPED SOOOOOO MUCH!!!!!!!!

Thank you for this video I figured out why it was not working my ball bearing fell out

Great video I learned a lot 👍

Thank you you got me up and running

Thank you!

Thanks my guy I found the issue.

Hello Hughes, my 50cc engine won’t start because it seems to have too much compression on the block. When I put the spark plug back on its place the engine becomes too heavy and not able to pedal the bike. When I take the spark plug out the engine runs nice and smooth by turning the back wheel around. What can I do?

Hey Boss the sprocket fits so well without the dust cap Sir can I just use the sProket as a dust cap or is there or will there be some unforeseen problems?? Thansk

two thumbs up great video

i hope this works im going to try this tomorrow

It helps to use a magnet on the Bucking Bar to pull the Ball Bearing out.I use Molybdenum grease on them,and without a magnet,the bearing doesn't come out.

hey thank for this video but one question, will the rear tire not move just becuase u don’t have a ball bearing in it?

Question, I was riding my bike fine for like 6 miles to the beach, then I slowed down, turned the bike off to go up a bridge, went to start it again and when I let the clutch out and the wheel locked up. I had to back up to free the wheel, then it had trouble starting again, then after a couple times of it starting it wouldn’t start again, and the chain keeps getting looser and looser and I have no idea why because the chain is still on the sprockets and everything. Now my main problem is getting it running, I have fuel, 30:1 ration, spark, compression, and the clutch is activating fine and disengaging fine, and the wheel still sometime locks up when I peddling. I have checked everything I know to check, I am extremely stumped and have had 3 guys come over to help to look at it. No idea. Any advice?

Hey man thankyou for the video please try answering this question, is the problem tht I haven’t put oil and gas in it like if I just try to pedal without it in will tht stop it because no lubrication or is tht not a problem

My back tire barely moves when the clutch is engaged. It's pretty much stuck. It does move freely when I disengage the clutch. What do you think is my problem? Thanks.

You helped me figure it out. (jammed chain)

I want to share my tips for reinstalling the brake arm. Firstly, on the OTHER side (bicycle drive side), I put two lug nuts on the axle and tighten them INTO each other. That is, get two wrenches, turn the top nut clockwise and the bottom nut counterclockwise. This way you can use vice grips to effectively grip the axle, put the wheel on your lap with the vice grips on the bottom, vice grips sandwiched between your thighs to keep the axle from rotating as you work with the brake arm cone nut or brake arm locking nut. I have a cheater pipe that fits perfectly into the brake arm, that sure is handy dandy. Before tightening the lock nut over the brake arm, I found out that I need to have the brake arm's cone nut juuuust a little looser than I would think, and maybe juuuuust a little looser than that even, because that locking nut pushes the cone nut in and effectively over tightens it. ALWAYS check that it's not too tight BEFORE putting the wheel back on!!! Thanks for all your great videos!

My issue is my back wheel wouldn’t spin unless you hold the clutch in like it should. But now I can push my bike and both wheels will spin without holding the clutch in. The clutch is still working a little bit but not enough to start or anything. What should I do? Love your videos by the way

Hi again I was wondering if you live in Nova Scotia Canada

Ayy Hughes, I have a problem with my rear hub. I already set everything up, put the sprocket on and serviced the hub...but I had the 2 loose brake pads fall out and I couldn't figure out how to get them back in. I figured I didn't need them, put on the sprocket and called it good. I didn't know I needed to put the brake arm back on. Are those pads necessary? Edit: I actually went ahead and did everything you showed in the video. Now my only issue is the gap between the dust cover and the bearing... My bearing has nothing completely stopping it from coming out :/ because of the gap between the brake cone And the bearing

Hey Hughes I have an issue with my cheap 80cc China doll and when I give it throttle it bogs down badly and then stalls if I don’t pedal to help it. I’ve tried connecting the wires and swapping them around, new cdi and magneto and replaced the piston and rings but everything wasn’t making a difference. If it was making a difference it wasn’t much of a difference. Can you please help me.

i dont have coaster breaks someone who installed my motor didnt do my rear sprocket very well and ive been replaceing the hardware with that i got not the wheel sometimes has a hard time turning with clutch down like it caught up

Hey watcha think if i said i replaced the bearing between piston connecting rod and crankshaft?

Thanks for your work man. I have problem with my bike. Clutch working perfectly but when I engage cluch piston become stuck instead of cycling up and down. When I remove spark plug piston again can cycle but of course engine canot run =/ I have my motorised bike in use last 4 years without big problem before that, so all parts is orginal.

My bike rides good when I pedal and push the clutch lever but when I let go my rear wheel locks up do you know wrongs wrong with it

Love the flat earth shirt and I’m having the same issue

If it is the clutch sticking from been in shipping to long does it actually stick solid or is their a lil give cause mine is stuck solid

I took off the cover to my drive chain on my YD 100 but when I put it back on the clutch lever is stuck and is very stiff, I tried rebuilding it but it is still stuck

Whats up man can you do a video on jackshaft/shift kits please thanks!

What if I still can't get it to engage wouldnit be something wrong internally with my clutch the tire seems to move fine and the chains spin bit the clutch still seems to be locked up?

I dont know if I like your videos or your shirts better.

Do i need the small spring on the clutch arm.or is it the bigger spring

I took out the spark plug to test for spark, and when i let go of the clutch, the back tire siezed up. I suspect theres theres something wrong with the drive sproket because its the last thing i messed with when i installed the chain. i dont know whats wrong with it

Late to the party here, but mine is slightly turning with a bit of oomph and the clutch feels too free, any advice or ideas? I’m not exactly the most experienced with these so I may not fully understand what means what haha

Hey 👋, do you k ow what to do if youve lost your bucking bar?

I like me some "tearin' ass through the neighborhood"

I need some help! On my 66cc bike when I pedal I hear this screechy noise and when I start the motor or just roll the bike without the motor on the pedals spin by it self. If I let them spin when the bike is on and stop them with my feet the motor turns up and the rear wheel locks up. How do I fix this? This has never happened before?

My rear wheel is turning but it’s spinning the wheel like the throttle is engaged slightly how do I stop that spin

I've got one for ya...I'll pull my clutch, and it will engage by it self. Last time, I was stopped, it engaged and knocked my back tire off alignment!! Any thoughts?!

I just bought 1 from market place and wish I could find someone to get it running

I took out the bucking bar and ball. When I put the new ones in, the bar was over 1/2" sticking out. Its been 3 days of this im stumped.

25 year moterized bike rider here . Coaster brakes are junk, bicycle hubs and axles and bearings are junk , disc brakes are junk. custom hubs sealed bearings mc type axle and v braks are they way to go 500 rides no maintenance

My issue is the wheel will turn when im pedaling but when I have the clutch held in it won't turn freely and I just put a new chain on it but with the old chain it would turn freely

that's what i was getting to, [the inner part of the coaster brake]

What about the spark plug boot I think that the reason I’m not getting a spark!! No matter what I do the spark plug will not snap in place. What can I do to fix this without damaging the boot or going to buy another boot and plug…??

My rear wheel has locked up while running can you help me out with an idea why

I just bought a new 80cc kit and inside not turning should turn freely straight out of the box

Mine has several back sprockets of the bicycle and every video that I've looked up there's only one sprocket on both sides I can't figure out how to get the chain on mine bicycle side

Like in the video the clutch will not let the back wheel turn ,took clutch cover off retighten the clutch cable and it still won't start and only on one bike the wheel turns now

a thick washer under the brake arm may also fix that problem

My buckling bar is stuck inside without the ball bearing any idea how to get it out thanks man

i see there's a coaster brake on that wheel, if the bike has a coaster brake that could be the problem

How can you tell what size engine is

Your funny as hell I

How do take out the inner drive

Hello there I bought 3 80cc Gas Engines kits for bikes and none of them work right and there bran new

I installed a spring loaded chain tensioner on my bike and it has jammed like that twice. Do you think getting a tighter spring will fix that problem if I choose to keep using this spring tensioner. Would you recommend installing a chain tensioner that isn't spring loaded?

im peddling. as i release the clutch, the back tire stops spinning. I don't know what to do

I just put in a high performance piston and cylinder now my piston is hitting the head.... How do I fix?

First like comment and view

How do I get my piston to move Abit it's a brand new engine with no mf oil in it and that blows my mind and pissed me off when I saw there was no oil cause I'm not starting it without lubrication to the engine first

What to do if my clutch sprocket is stuck

It's funny because it was the bearing and bucking bar that fell out.

That shirt, lol

My clutch won't pop up on my bicycle motor

Heh, took the clutch plate completely off, still acting like the clutch is engaged...I'm so confused.

after watching the video i see the washer won't fix it

u have a snail on ur hub :D

My wheel won’t turn when the spark plug in, why is that. Anyone know why?

Need help