Carburetor And Clutch | Adjusting Your New Motorized Bike's Carburetor & Clutch

Carburetor And Clutch | Adjusting Your New Motorized Bike's Carburetor & Clutch | Bike Berry

Рет қаралды 179,801

2 жыл бұрын

Tony shares what he learned from our great Facebook community group about setting up our NT carburetor and clutch on your motorized bicycle properly the first time. Following these steps will help you understand how to adjust your throttle cable and idle adjustment screw to work together while giving you plenty of adjustments. Then he shows you how to properly connect your clutch lever to your engine's clutch arm. Let's Roll!
Please check out our improved throttle grip here:
www.bikeberry.com/products/bb...
***Every single part mentioned can be purchased here 👇👇👇👇👇***
BikeBerry.com ►bit.ly/1FZ8nPp
Facebook ► on. 1wWG4fD
Instagram ► bit.ly/1aM3WxZ
Twitter ► / bikeberrycom
***Everything you need to make your own Motorized Bicycle.***
Chapters
0:00 - Introduction
#motorizedbicycle #bikeberry #motorizedbike #100cc #80cc #66cc

Пікірлер: 588

@user-bs5xe4np8z 11 ай бұрын

My goodness , I was at work and a friend said he knew how to install carb lol I’m gonna take the information from your video and do it right This is how I get to work everyday I have a prosthetic foot , my freedom to get around Thank you

@normanmoore1659 11 ай бұрын

Gotta say that you were probably the guy who helped me more then the 100 other videos I watched YOU THE MAN ,👍

@audieallen9734 Жыл бұрын

I play this on .75x speed and forgot. left and came back, hit play I thought, wow! this guy is baked! lol jk definitely thumbs up from me

@robertwhitt3762 Жыл бұрын

#Build it right. Dude.

@svensplooge9961 7 ай бұрын

U was the 1 that was high hahahaha

@Codbeast101 7 ай бұрын

@@svensplooge9961 You might be with this grammar😂

@davekahle8491 Ай бұрын

lol, had to try it....hafuckinlarious, lol. thanks, I needed that.

@joeypriolo 12 күн бұрын

Put it at half speed and he sounds drunk 😂

@benjaminjclark6895 Жыл бұрын

I recently came into possession of one of these and I have to say I'm very thankful to have you as a teacher and someone to show me some loops and give great feedback on the issues that I'm having on a hand-by-down fixer upper. #builditright

@michaelmccuin5390 11 ай бұрын

Thank you for walking through it slowly but not to slow. Your the first one that I could understand to say again I appreciate your smooth way of talking. Have a great life. Keep it cool

@jakeford3359 2 жыл бұрын

Im still 15 years old been riding em since i was 13 years old and i love motorcycles alot but im still young to ride one so im into this hobby and i really enjoy it. Thanks Tony. #BUILDITRIGHT

@JoseDiaz-kv5cz 2 жыл бұрын

I'm 62 years old!, and used to ride a motorcycle, and bought one of these, to ride around town!, its little slower,lol but that's ok it's a great hobbie!, and when your ready for a motorcycle, ALWAYS!!! remember to wear helmet, Jean's, gloves, same as a motorcycle I just bought Phantom 85 v2 just breaking it in! RIDE ON!!!!

@williamdickson2283 Жыл бұрын

I would like to start out by saying thank you for all the helpful information. My brother gave me a 66cc beach bike. It h ad a lot of issues broken motor mount bolts 3 to be exact slipping clutch and a carburetor full of debree. And thanks to your videos I was able to bring it back to life. So thank you so much please keep making videos priceless.

@taylorrader6918 2 жыл бұрын

This whole series has helped me with the little problem I had with my first motor and I actually had to take it off because I missed something up but if I would have watch the videos first I wouldn't have missed it up. You guys are doing an amazing job and you always #builditright

@lookingtoleave-wi9rh Жыл бұрын

You ABSOLUTELY hit the nail on the head about the magneto leads being backwards!!! Brand new motor, just WOULD NOT start and I went through everything trying to diagnose it, turns out it was the leads being reversed! I have also noticed these motors are NOTORIOUS for the threads on the end of the crankshaft stripping at the drop of a hat to where the won't tighten back up,! I have TWO of these motors this has happened to, is there any OTHER ways to fix it besides rethreading it to the next size down or replacing the whole assembly?!? Thanks in advance! Be blessed.

@haroldturner8114 2 жыл бұрын

Clear easy to follow instructions, with just the right amount of warnings on what not to do. I have a motor with a starter and it's a little different in the clutch area but carb is same. My problem is mostly now in the sprocket, problem keeping it centered and running true. Thank you for the tutorial. Much appreciated. BTW, I'm 86 yrs old and looking forward to using this bike this summer.

@TheVonhollan Жыл бұрын

#BUILDITRIGHT This whole series has been A great refresher. I had built my first mini bike when I was about 13, 2 different engines to make one that would get running. Then I got into landscape work always fixing weed eaters and other 2 strokes. I did buy a cheep kit online it only took me 4 hours to compleat my Schwinn 29inc. Beach Cruiser into a now motorized assist bike. It was this video that helped me to set that pesky idle screw to almost perfect from there I let it warm up and fine tuned it. Thank you for all the help!

@mcchillindaily4581 8 ай бұрын

I can't believe how much I enjoy watching these videos.

@ThePetalesharo 2 жыл бұрын

#BUILDITRIGHT I just want to let you know that this whole series is awesome! It's really helping me plan what I need to do to make the engine kit I have coming fit well on my cruiser, as well as all the things I might need to buy. Has answered so many questions in a small timeframe. Thank you Tony!

@charlidaly9054 Жыл бұрын

#doitright

@theanomalous1401 2 жыл бұрын

Thanks Tony, for the entire build series. My grandson will really find this useful! #BuildItRight. 🚲💨🇺🇲

@tonytaylor5087 2 жыл бұрын

You’re so very welcome! Share your project in the Facebook group when you’re working on it. Love to see it!

@bryduhbikeguy 2 жыл бұрын

Sweet ! #BUILDITRIGHT.Thank you for your continuing series on building a kit right the first time.Good gosh.I just realized I started with you guys 4 Years ago.Still riding that bike.I've added things as I could,and really enjoy just cruising sometimes.I have 2 more kits,and 2 on the way,all 66/80cc each,plus built my brother's engine last summer.Have fun,and be safe!

@tonytaylor5087 2 жыл бұрын

That’s amazing! And you’re absolutely welcome. The series is/has-been so fun to dive into. Take care my man!

@americafree6855 2 жыл бұрын

Thank you for describing how to adjust the carb so easily understandable!

@SyberSqueegy 2 жыл бұрын

Thank you for enlightening me on the fact that the stock carb needle clip has multiple positions on it! Now (once break-in progresses a bit more) I know how to lean her out easily.

@dwayneboyer8828 2 жыл бұрын

I bought a 2 stroke engine and installed it on my 18 speed mountain bike. But I really got some valuable information from this video that I can use ASAP!

@tonytaylor5087 2 жыл бұрын

Excellent! Let us know how your mountain bike project is going!

@genehendrickson9358 2 жыл бұрын

Very Well Done Sir, takes the guess work out of many of the problems first time installers may and will encounter.

@tattoojacktat-citysupply469 Жыл бұрын

I'm really liking the presentation. taking it easy nobody stressing me just me my build and some tuning time what kind of reminds me of good quality tattoo time thanks again bike berry technicians in fact thank everybody thank you all for keeping this bike tradition going in the northwest I always have loved riding bike with or without motor but I'll tell you what nothing is equal to something bikeberry built!#BUILDITRIGHT

@commentcrafter4158 2 жыл бұрын

Just got a kit from you and i cant wait to put it together and then start buying more parts to upgrade it!

@briansirmons4852 Жыл бұрын

Really appreciate all the info you give and for you taking the time to make all the videos. Very informative with awesome information.

@JoshHardy303 Жыл бұрын

Omgosh look !! I'm about to get my cruzer in the mail now I'm so excited 😆 I can't wait ..and I'm going to watch all of your videos to make sure I get everything right! ..and I want to record most of my Journey with my new Freedom! .. thank you for all of your material .. especially the carborator , and Head Variations I enjoyed those a lot

@walleyeye Жыл бұрын

OMG I’m so happy I found ur channel!!! I have a friend who is just getting his out together and he is having nothing but problems. He knows little about these kits so I’m helping as best I can.

@georgedean5734 2 жыл бұрын

Build it right !!! Thanks for the info ! I live in N.H. , way to much snow here for winter riding. Thanks for the motivation to get the "Ditch Digger " super tuned !

@tonytaylor5087 2 жыл бұрын

Yes! Winter time is perfect for getting your ride ship shape!!

@stevenjackson507 9 ай бұрын

Thanks for all that you do,by taking the time and showing step by step, I see that you love what you do

@melvinrandall2181 2 жыл бұрын

I've built several yet I'm still learning tricks thanks BlackBerry

@jaimezhang9269 2 жыл бұрын

Thank you very much for teaching how to adjust the carburetor and the cluch

@Emberinthewyld 2 жыл бұрын

Be patient with your first build and #builditright Love this series so informative 👏

@HanzelFonferek 2 жыл бұрын

Thanks for this video!

@bryanfrasure1534 Жыл бұрын

Hey I really can't thank you enough for your help. Thank you so much

@waynegallant9056 11 ай бұрын

thank you for this new to the hobby they are so much fun to ride its like your a kid again thanks bike berry

@mrfuzzy4770 6 ай бұрын

Great video, very easy to understand. Thanks for the help.

@doyleray4374 2 жыл бұрын

Finally a dyi that was thought out before filming started and good informational content.

@rickymiller7624 8 күн бұрын

I love these motor bikes, I'm just having problems with my carb. This video really guided me to fixing my problem. Thank you ..keep up the gud work

@P100D. 2 жыл бұрын

Dammmm lots of small details, thank you for sharing 😊 love you guys !!!

@tonytaylor5087 2 жыл бұрын

Glad this helped you P100D!!

@robahbeck4420 2 жыл бұрын

Every tip you gave was helpful

@jamescrawford3325 2 жыл бұрын

Very informative and easy to follow. I will be watching for more important mechanical institutions. Thank you!

@mattDIY 2 жыл бұрын

Good idea 😃 good job

@michaelevans5054 2 жыл бұрын

Thanks for the walk through. It helped alot. From Washington state. 🙂

@MrJoeju420 2 ай бұрын

Dope. I was wondering why my engine wants to keep dying while it's going! I wasn't even looking for something about that right now. Just looking for a basic tune up video but nope here is the KZfaq gods solving my problem!

@sheldonhill8427 2 жыл бұрын

This video was very helpful....I wish Tony was around when I was trying to be apart of the community and jacking up 3 motors....thanks man! Hopefully I can make my back....

@sheldonhill8427 2 жыл бұрын

#BUILDITRIGHT

@edwinmyers4083 Жыл бұрын

It helped me with the initial setup good video

@Anthony_T3ch Жыл бұрын

#BUILD-IT-RIGHT!!!!!!!!!! GREAT JOB SO FAR

@user-ty6ty2sf4x 4 ай бұрын

I just seen the show and it was great nice detail on the the show 100% helpful. Very good job I look forward to seeing more THANK YOU

@kenchotiner5113 Жыл бұрын

Good stuff! Thanks

@jimbaudendistel Жыл бұрын

I was struggling with both the clutch and the carburetor and didn't even realize it until I watched this video. Thank you so much! Now I will cross my fingers and hope that I can finally get this bad boy running. #BUILDITRIGHT

@markgibson840 2 жыл бұрын

I like the explanation of setting the carburetor, now I can adjust my five bikes. I have to get fabric from craft store not to loose clip while breaking down carburetors too. Good teaching video I like this awesome!

@tonytaylor5087 2 жыл бұрын

Mark! So glad it helped you my friend!

@jeremiahjackson4995 2 жыл бұрын

Appreciate it video Tony ..found it very useful and easily broken down ,to where any one can build a bike ...Ive actually bought many motors from bike berry and absolutely love their motors ..#builditright ...

@davidolsson5502 2 жыл бұрын

Very, very well presented!

@kimdecastro9156 2 жыл бұрын

great video first time builder .still setting every thing up. on my bike . # build it right

@peggybrashear4481 2 жыл бұрын

Love the video!

@williambrucesanders6878 Жыл бұрын

Thanks man u saved my life i appreciate the time and effort u put in the video

@garybeard4421 Жыл бұрын

Learned alot..glad you took the time to make this manual thank you im putting my kit together please me luck I've got a lot of people interested and watching me I mention bike berry hope I can help😊

@jeffyoung3528 2 жыл бұрын

Great video tony, should help alot people out

@PhillipGonzales-eq3gf 7 ай бұрын

Great job 👍

@timlaplante6711 Жыл бұрын

Excellent tips and you do know what you are talking about. It is great to have resources like this. I wish I would have stumbled across this sooner. Thanks again. #BUILDITRIGHT .

@user-os5lx1di4p 7 ай бұрын

Love your video's, You taught me SOOOO Much, Thank You,# Build it RIGHT....

@user-qw4kw4kq3y 6 ай бұрын

This video made it cleared on how to install.the carb. And improve the. function of the clutch

@nephilimxijingping 11 ай бұрын

#BUILDITRIGHT Thank you for the information. I'm building a 100cc with a cruiser bike frame I bought. You really helped me out. Had no idea how to install Throttle and Clutch cables on bike since I'm new to this. Your the Man!

@vishalpathirana6898 2 жыл бұрын

Just ordered a new kit, can't wait for it to get here. Trying to learn as much as I can and prepare myself for when it does. #builditright

@Fred_the_1996 Жыл бұрын

How did it turn out??? I'm waiting for mine to arrive

@FAHAD-sc4qx Жыл бұрын

وانا أيضا

@rexisretro Жыл бұрын

i learned something. thanks

@gailjohnston7671 2 жыл бұрын

Learned I have been making mistakes, Very helpful

@ceethanasouk3146 Жыл бұрын

Good video. I know about 🚗 but didn't know tips n tricks that I saw u do about bikes... Thanks

@raymondshrader3555 Жыл бұрын

That video was really good brother and the reason I know is because I was able to follow along on that one, lol.... Tks again

@robletto841 9 ай бұрын

Nice job!!

@jamesgnarkill3112 2 жыл бұрын

Hey Tony.. nice deal man....killer way to kick off the new year... ride on...#builditright

@tonytaylor5087 2 жыл бұрын

Appreciate it James! Let’s do this brother 💪

@stevestevens919 Жыл бұрын

I liked your video very much showed a lot of things on how to do. I want to try get one for my disabled phone. Show your video was very helpful to me thank you so much.

@gotchurebeacons-gaming9023 2 жыл бұрын

Great video, Tony! Nice and simple workaround on the handle flaw…these little challenges are actually the fun part about this hobby…testing our creativity and problem-solving skills. #BUILDITRIGHT

@tonytaylor5087 2 жыл бұрын

Thanks brother! That’s right, keep it simple and have fun with those challenges 😊

@fuleanicolae1981 2 жыл бұрын

Vreau unor orator Vreau carburator cum sa procedez..?

@nikkopanella2557 2 жыл бұрын

This bike is literal perfection! #BUILDITRIGHT

@normanjames9039 2 жыл бұрын

Thank you so much

@GamingMaster-us7ty 3 ай бұрын

The Best It's simply the Best. Bikeberry

@jonmerry2190 2 ай бұрын

Build it right. Thanks for the video made it easy. 4/18. 10:13 pm

@dayneponsart5097 8 ай бұрын

Hey great video.New installation my bike won't start but after watching the video I realize my throttle cable is to loose The video shows how to pick a different hole to pre snug cable having g your adjustment screws all the way in so you have maximum adjustment abilities

@ericperry3911 2 жыл бұрын

Thank you

@nathanclemens7577 Жыл бұрын

#builditright I just started to get into this new hobby wow

@JorgeRodriguez-ei2gi 2 жыл бұрын

Outstanding videos well explained Mr Tony ,thanks,continúe with motorized bikes ,Say hello Joe & Bros.

@tonytaylor5087 2 жыл бұрын

Thank you Jorge!!

@timothysalyer483 2 жыл бұрын

that vidio was extreamly helpful #Build it right

@bruceschlick4009 2 жыл бұрын

Nice job so far tony keep up the good advice my dude... #builditright

@mariocoronado7108 2 жыл бұрын

I never want anything in my life but great videos great everything bikeberry you're the greatest and I love building motorized bikes myself #buliditrate

@lenovercl 2 жыл бұрын

Thank you Tony! #BuildItRight

@jontorgerberg1929 2 жыл бұрын

I’ll have to go back through my clutch and carburetor adjustments after watching this

@mikemccoy4614 Жыл бұрын

Thanks Tony...great video #Builditright

@randywissler2710 Жыл бұрын

#builditright I enjoyed the video. I learned more than I knew. Thanks. !

@mattludwig1078 10 ай бұрын

#builditright. Could really use this to get around town. Love the upgrades

@alwhitesell4023 2 жыл бұрын

Thanks. The best bench mats I have found are Pig mats, the white ones made for absorbing oil.

@MardukOmega Жыл бұрын

Good video.

@kauairalph108 7 ай бұрын

Thanks, build it right ✅️ 👏

@hondarew4271 2 жыл бұрын

Thanks for this video!! So helpful the carb can be difficult to set up for a noob like me #builditright

@pharflo 2 жыл бұрын

This was very helpful for explaining the details. The little paper assembly manual that came with the kit is really vague and confusing. So, thank you for showing us! #BUILDITRIGHT

@johnrutledge3892 Жыл бұрын

Thanks

@stephensharpe2852 2 жыл бұрын

#BUILDITRIGHT because it only goes together one way, the right way. Ya know I NEVER subscribe to anything on KZfaq, but this has been so useful, and simple I'm going to keep the hole series in my library for future reference . Thank you!

@ivanruiz5149 2 жыл бұрын

It bike it 🔥🔥👍

@dogswhistlesharam9029 2 жыл бұрын

Looking great! 😃👍 #BuildItRight

@needamotor 6 ай бұрын

#builditright I have a bike someone else built. It never ran right, so we have been learning how to get it going. This video helped me greatly with the carburetor piece. It was a good starting point which at least allowed the bike to idle so we could tweak it. It will never be a great bike, but at least I got it working. Yeehaw and thank you

@danbrownellfuzzy3010 10 ай бұрын

The strap to the ceiling was a nice tip for working on the bike. The J hook to a rafter was easy.

@wickedstrange7006 10 ай бұрын

#builditright I'm a first time bike builder and I can say I've ran into my fair share of problems. More then I wish I had. But this video has been by far the most helpful one ive seen thank you so much.

@samsalazar4002 7 ай бұрын

#BUILDITRIGHT I just got my 1st bike and it has a lot of issues by thanks to you all it's slowly working out. You all are awesome!

@mitchelldenny2569 7 ай бұрын

#BUILDITRIGHT 👍 it is awesome that you're making videos and showing everything about the motors that come with purchase of the kit ordered. I also like the way you brake down and explain each section it's functions , and also videos that show step by step on how to enhance power performance,and modify the engine for more power.