How to FIX THE PAINTED BLACK PLASTICS ON YOUR CAR

How to FIX THE PAINTED BLACK PLASTICS ON YOUR CAR | Full Tutorial

Рет қаралды 100,330

IMJOSHV - Car Detailing and Reconditioning Tips

Күн бұрын

Full Tutorial on How to FIX THE PAINTED BLACK PLASTICS ON YOUR CAR! Cars today are using more and more of the painted black plastic finish on both the interior and exterior components of vehicles. These finishes tend to scratch and degrade much faster leaving your cars finish looks dull and old. I get questions all the time about how to fix one of the most common spots for this black plastic trim: The Car Door Pillar. Many people will polish this area and it will come out looking even worse and you may think that you ruined the panel. but I have good news.. Its not ruined and its easier to fix than you think... ENJOY!!!
See the items I use and join the mailing list at: www.DTLRsupply.com
PRODUCTS USED IN THIS VIDEO:
HAPPY DETAILER SHIRT - dtlrsupply.com/products/happy...
Milwaukee Polisher - amzn.to/3GYMHL4
FULL KIT - amzn.to/41BXfta
Maxshine M15 Pro Polisher - maxshineusa.com/product/dual-...
( use code IMJOSHV15 for 15% off)
Rupes Yellow Polishing Pad - dtlrsupply.com/products/rupes...
ON AMAZON - amzn.to/3vmEJJ5
Red Finishing Pad - maxshineusa.com/product/car-p...
(use code IMJOSHV15 for 15% off)
ON AMAZON - amzn.to/41ABj1E
Polish - maxshineusa.com/product/mirro...
(use code IMJOSHV15 for 15% off)
ON AMAZON - amzn.to/3tDkPcj
Finishin Wax/Glaze - amzn.to/3NG4r1A
MicroFiber Towels - dtlrsupply.com/products/creat...
TIME CODES:
0:00 - How to FIX THE PAINTED BLACK PLASTICS ON YOUR CAR
1:19 - The Tools and Products you need
5:06 - Step 1
8:02 - Hazy Finish
8:49 - Step 2
11:48 - Final Results
13:00 - Diminishing Returns
#cardetailing #paintcorrection #polishing #blackplastic
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).

Пікірлер: 137

@larrysing 5 ай бұрын

I’m an advocate of slapping PPF on those after cleaning them up. That way they stay nice a LOT longer. I did mine on my personal car & they’ve looked immaculate for over a year now. Thanks for the tutorial!

@imjoshv 5 ай бұрын

That’s a great point!!!

@joshpetit44 5 ай бұрын

Would the ppf stick to the surface with the wax on there? Usually you clean with alcohol first to get everything off

@larrysing 5 ай бұрын

@@joshpetit44 You use same prep for PPF as always - bare/clean surface.

@michaelgray42 5 ай бұрын

What is PPF?

@larrysing 5 ай бұрын

@@michaelgray42 Clear paint protection film.

@streetready 4 ай бұрын

This is Great Josh! awesome tutorial got a good refresher!

@poman8772 5 ай бұрын

Thanks Josh this was fantastic. I must admit I am guilty of using too aggressive compound on the B pillars years ago…..Figured out what you demonstrated in this video . Happy New Year to you and your family!

@malcolmar 5 ай бұрын

Masterfully done! This is why you want to trust your car with someone who has knowledge and experience. Again, well done.

@TommyPickIes 5 ай бұрын

Really great explanation. 👍

@S2NAZ 3 күн бұрын

Great video 👍🏻 I hadn’t attempted this on my Lexus yet. Good to know 😁

@infugaming7865 5 ай бұрын

Dude... You have no idea how much i needed this... Great video!

@imjoshv 5 ай бұрын

Glad to hear it!

@gunsnsails 5 ай бұрын

I have struggled in the past with this as well. Thanks for this method. I'm going to do that on the next vehicle I get in the shop with piano key trim.

@GoGreenBx 5 ай бұрын

Great lesson! Ty!

@theunkownmr.562 5 ай бұрын

JUST IN TIME! I needed this!

@imjoshv 5 ай бұрын

Awesome

@WARMEZ911 5 ай бұрын

Great video I love how you do yours unscripted! Mine are not piano “shiny” black like that but still get some scratches so I will give this a try. Thanks!

@user-eh5de2ik7c 3 ай бұрын

Awesome job.

@richm7410 5 ай бұрын

Great video Josh. Thanks!

@imjoshv 5 ай бұрын

Glad you liked it!

@Lin.Stone. 2 ай бұрын

Just found you and I can't thank you enough. 🎉NEW SUBSCRIBER🎉

@Auto-Bots.Custom.Detailing 5 ай бұрын

Just placed an order through your website, you have been so inspiring in my growing to start a business.. would love if you throw in some free stickers or something!!! Bought a lot of my products off your recommendations.. but finally bought the MJJC foam cannon and rag company engine blaster.. had a little extra money from my Xmas bonus.. so wanted to throw you some support. Love your videos man.. truly get me through my days at work.

@vbar66l93 5 ай бұрын

I’ve been waiting for this video on B pillars for a few years now. I’ve done a few tings with polish but I’m not a pro. Thanks for doing this video.

@imjoshv 5 ай бұрын

Glad it was helpful!

@adnerperez5598 5 ай бұрын

Good video Josh!

@imjoshv 5 ай бұрын

👍👍 thanks

@andrewguerra4953 5 ай бұрын

Thank u. I needed this video for sure .🔥💪

@imjoshv 5 ай бұрын

No problem!!

@carloscastellanos5852 5 ай бұрын

Help me a lot thanks for that ,I did in my Chevy traverse

@johnniejohnson8026 5 ай бұрын

Nice job great video Josh

@imjoshv 5 ай бұрын

Thanks!

@steveschwab922 5 ай бұрын

Great video.

@imjoshv 5 ай бұрын

Glad you enjoyed it

@BadAssDetailz 5 ай бұрын

Hey Josh! Question what about if there was overspray on the door trim pieces, you’ve tried all the easiest steps first. I’m a Detailer/ working at a body shop/collision repair. I see this on a daily basis.. thanks for awesome content as usual 🤙🏼

@jbalinski 5 ай бұрын

Great video Josh! Those B-pillar plastics typically don't have any clear coat on them which is why they scratch so easily. I've seen some people recommend having a shop throw some clear over them to make them more durable. I know most people won't go that route, but also an option!

@jamestapscott9400 4 ай бұрын

Plastic: yes, never witnessed a clear coat over paint.

@StephenBrewer89 4 ай бұрын

Seasoned detailer here. You just earned a sub.

@davidfountain4229 5 ай бұрын

Good stuff!!

@imjoshv 5 ай бұрын

Thank you 🙏

@stevejordan9567 5 ай бұрын

Thanks. Very helpful.

@imjoshv 5 ай бұрын

👍👍

@torrealto 2 ай бұрын

The weatherstripping around the windows looks fantastic is there a video focusing on that?

@chrisbradley3224 5 ай бұрын

Great video. Do you think Koch Chemie M3.02 cuts enough to try on these plastics or should I start with Fine Cut?

@MrFastFox666 5 ай бұрын

My car has some piano black trim, and some coated in that soft touch rubbery material. One piece looked horrible so I removed the rubbery coating and polished it to convert it to piano black. It turned out OK, but definitely hazy and not as glossy as the OEM stuff. I'll definitely give this a shot.

@imjoshv 5 ай бұрын

Yea hopefully it’s just needing a light final polish to remove the haze

@happytrails1963 5 ай бұрын

Thanks for video! Need to do this to b pillar and around panoroof have similar sections that are looking pretty bad.

@imjoshv 5 ай бұрын

Yea it’s a bummer that these areas scratch so easy but already it can be fixed

@imjoshv 5 ай бұрын

You bet!

@chrisgraham2904 4 ай бұрын

The B pillars on my Navigator were looking pretty sad with minor scratches, swirls and had a nickle size dent on the driver's door pillar. I filled the small dent with spot putty and choose to wrap the pillars with a good quality 3M High Gloss Black wrap and they look new again. It was my first DIY attempt to apply a wrap, but being a small feature and basically flat, it was extremely simple. After success with the B pillars, I also wrapped the C pillars, which were body paint color, but now looks much better in gloss black, providing a transition from the rear-side black glass around to the rear window glass hatch. These were a little more challenging with additional contours, but they came out perfect. Just another option.

@MRDetailing 5 ай бұрын

Hey so I watched your video on the automatic retractable pressure washer hose from an air hose reel and you mentioned you left the link to a Amazon basics conversion of the air hose reel to a pressure washer reel but when I clicked on the video it say you have the video private I do t know if you meant to do that but I was hoping I could watch the video because I need a cheaper alternative to a pressure washer reel

@SuperMeluco 5 ай бұрын

Great video, thank you. How about a tutorial on how to accomplish this using hand power. Not many people have access to tools such as yourself. I'm sure millions would appreciate that.

@Yorkiepoocharlie 11 күн бұрын

Cut a microfiber towel into small squares. Apply polish. Rub in random circular motions. Clean and check your work. You will be there a very long time.

@khyoon14 2 ай бұрын

i polish and PPF it. ABC pillars. Perfect

@Bluenote05 5 ай бұрын

Can you guys recommend the best way to remove water spots off this plastic strip? The glass spot remover I use says to not use it on plastic. I don't have scratches, just spots. Thanks

@michaelmartin2276 5 ай бұрын

My Subaru B pillars are metal not plastic and a matte finish. Had some small rust spots. Sanded down, primed with rustoleum primer and matte paint. Works great and looks great !

@imjoshv 5 ай бұрын

Perfect!!

@michaelmartin2276 5 ай бұрын

@@imjoshv Thank you. I enjoy your videos.

@aidanmacdonald5308 5 ай бұрын

Screen ProTech is also a viable option, helps protect it from scratches as well

@tbrazeil 3 ай бұрын

Hey Josh. What would you recommend for the matt black B pillars on a 2017 Honda Civic? Any advice would be greatly appreciated.

@MichaelOnRockyTop 2 ай бұрын

Hey Josh, i know you mentioned you don't prefer the white rupes finishing pad, but for the finishing wax, have you tried Rupes Uno?

@cbijames7 5 ай бұрын

Nice video now could you use a coating to get the clear coat back on them.

@MikesPL86 2 ай бұрын

Hello sir. Do you have an idea how many times can you actually polish those? Had mine polished 4 times already in a 2 year old car. Recently had it serviced at the dealer and they scratched the hell out of them again. Wanted to know how often and how many times can u repeat this. Had it done with Koch Microcut

@waynegregoire2354 5 ай бұрын

What's your thoughts of using an all in one on the b pillars?

@Rarebreed1114 Ай бұрын

What would you recommend to polish billet wheels?

@jamestapscott9400 4 ай бұрын

How about the matte black stick-on type Ford places on the F-150?

@richsmith3120 5 ай бұрын

I like 3D Speed with an orange lake country ccs pad follow up with either a white or black lc ccs pad.

@imjoshv 5 ай бұрын

3d speed is so versatile! Yea that would would amazing for this for sure. Enough cut and perfect finish and also has the glaze added in for great results and protection

@jcmc6182 5 ай бұрын

Looks great. But, one wash later, and you have the condition right back. I think im going to choose to wrap the pillars !

@imjoshv 5 ай бұрын

Yeah wrapping them after fixing them is a great idea!

@Owen-bz4qe 5 ай бұрын

Great vid! Any recommendations for cars with the sort of rubberized matte b pillar trim?

@keving4304 5 ай бұрын

Great how to fix. How about protecting?

@MoralessHD 5 ай бұрын

how much would you charge this as an add on?

@Lukebigrig 5 ай бұрын

Thank you Josh, I have those on my 2019 f250 and it bothers me how they look like crap. lol. Can this be done by hand with an applicator or microfiber? I don't have a polisher yet.

@imjoshv 5 ай бұрын

Because they are so soft, its hard to get a nice consistent finish but you should still be able to make an improvement

@thomasnew8606 4 ай бұрын

The Ford parts like these are terrible for scratches. We have a brand new Expedition and I have washed it 1 time and these are scratching badly. Now every Ford I see in parking lots I notice all of the scratches. I have a 2013 Genesis sedan and the same B pillars are not scratched at all...I assume the Genesis is a harder paint?

@dennysheldon1682 5 ай бұрын

Josh, is there a way to duplicate these results or similar without a polisher, just by hand? Thank you

@mygt8a4re 5 ай бұрын

Sorry, I'm not Josh, but I feel I can answer this question if you don't mind. You can hand polish anything that a polisher can be used on, it just takes more time & effort. In this case, with the softer pillar, it will be easier to do by hand than your painted/cleared metal surfaces such as the body.

@jeremypearson6852 5 ай бұрын

In Florida I’ve found the pillars get bleached over time. Is there something to restore them to black again?

@andresmattos7541 5 ай бұрын

Yes, move out of Florida its a crappy place to live too crowded and too much crime.

@cranfktubner7677 5 ай бұрын

So funny I was polishing some black piano just before watching your video 😂feels like KZfaq has cameras in my house …

@imjoshv 5 ай бұрын

haha

@stevemclean5787 5 ай бұрын

Its not only soft its ultra thin. A finishing pilish and soft finishing pad is all it takes. Its also best to tape off the rubber seals so you dont get black all over your pad.. Can you do a video on the garden hose spray nozzle you recommenf. Im so tired of replacing sprsyers because they break or the o rings break or they leak . Griots hss one but its $100! There has tobe a commercial grade spray nozzle thatlasts for less than $100.

@imjoshv 5 ай бұрын

Hi, like a standard Garden hose or for a pressure washer. I havent dont alot of testing on garden hose triggers but i will start looking in to it!

@stevemclean5787 5 ай бұрын

@@imjoshv Thanks Josh! There are numerous videos that demo and review various nozzles but none of them are done by a detailer so far my purposes, they're not relevant or helpful . Also, I want to share a pair of rubber gloves with you that I discovered last year. They're an absolute game changer in terms of washing when it's cold outside. No, I'm not affiliated with the company in any way. Just a fellow detailer who likes to share great new products and killer dras with my brothers in arms . Unfortunately I don't have a YT channel to do that so I'lldo it via email.

@MrChili1496 4 ай бұрын

still using your dewalt dcm848?

@sheffcitys2forgedinsteel255 4 ай бұрын

6:44 before he even starts, Fast forward

@stevemclean5787 5 ай бұрын

Theyre usually super cheap to replace.ususlly less than having thempilished. When i tell the customer the price and that ill replace them for less than the price of polishing them, they usually opt for the new ones.

@imjoshv 5 ай бұрын

Nice, I typcally polish them oput but there are many cases where they are too far gone and in that case replacement is the only option. Have you done quite a few replacements for different brands? I have a customer with a porsche Panamera that could use new ones and im just starting to look at the cost for them

@turncoat725 5 ай бұрын

Can you do one for the black window trim?

@micd9256 5 ай бұрын

A finishing polish on a microfiber towel and use your finger to guide the towel back on forth on the trim. Don't apply any pressure and don't let the polish start to dry out. Take your time and tape off any rubber surrounds.

@doughope761 5 ай бұрын

My B piilars are matte black and after 1 year there's inconsistent effects from the sun. How to deal with that?

@imjoshv 5 ай бұрын

I’d have to see them to be sure, but in that case using a restorative product would probably be best. Maybe solution finish since that has a black appearance it may help to dye the area back

@trentonite 5 ай бұрын

Would the same process work on plastic matte black pillars similar to an FJ cruiser?

@imjoshv 5 ай бұрын

That’s just pure plastic right? Not painted

@trentonite 5 ай бұрын

@@imjoshv not painted, but has a matte sheen to it. There's a McKee's video on YT that shows them polishing away some oxidation on it. Seems like it may be the same process at the end of the day. Grab a polisher and start light, see what happens.

@jamesp57867 5 ай бұрын

Chelsea from Attention 2 details had this issue some months ago. I wonder if she fixed it?

@imjoshv 5 ай бұрын

Oh interesting... Yea im sure she figured it out

@Michael-ri2eh 5 ай бұрын

Lookee Great

@imjoshv 5 ай бұрын

Thanks!

@miguelcalmo2005 5 ай бұрын

I have a question and would really appreciate any advice but I sanded and clear coated my headlights . They look nice and clear during the day but at night they’re kind of hazy so any suggestions on what I can do to fix that ?

@cashewbaby3163 5 ай бұрын

Hey Josh, great video. I was wondering if you knew how to clean up matte black pillar and window trim on Toyota's. My 2005 Camry has this kind of trim with no signs of clear coat that came on it from the factory, and is very faded. It also has some stains on it from whatever's gotten onto it over the years. Any clue how to fix this? Thanks!

@jameslane8354 5 ай бұрын

You’d be better off replacing the trim instead of restoring it

@cashewbaby3163 5 ай бұрын

@@jameslane8354 Haven't been able to find part numbers for them, and even if they do sell them they will be extremely pricey for a 19 year old car.

@drewski7549 5 ай бұрын

Sometimes there wrapped from factory so if you really wanted to you could peal it off and underneath is your car paint

@bunnyfartloads 5 ай бұрын

Another tip if u save a used yellow rupes pad and use that it will work wonders you will leave much less hazing the first time around.

@imjoshv 5 ай бұрын

yea thats essentially like using more of a finishing pad since the material will be broken down and slightly softer. As long as its cleaned out properly

@isidrosevier1125 5 ай бұрын

I have that same flashlight from Costco, it is an amazing flashlight. Super bright and well built.

@zelowatch30 5 ай бұрын

Thx maybe next u can show how to get those stains off the interiors without a heat gun. Is it even possible?

@imjoshv 5 ай бұрын

what kind of stains are you talking about?

@bandwagon240 5 ай бұрын

On some cars, these are vinyl stickers or are matte (and sometimes vinyl as well). I find that just wrapping them is cheaper and less effort, especially on older vehicles where they're just too far gone to save.

@stevelouie5928 4 ай бұрын

When you remove the wrap, will it ruin the original part? I've seen when people remove wrap from cars, that it takes some of the clear coat off. Kind of defeats the purpose of a wrap.

@paulbui2336 4 ай бұрын

Always wanted to know the proper way

@imjoshv 4 ай бұрын

This is my favorite way. I’m sure others have their own techniques as well but this always gets great results for me!

@djratino 5 ай бұрын

What is good to work on flat black not to polish it out? I don't want a whitish haze as car wax will give? Detailer's spray? This is for an electric scooter, not a car.

@Subgunman 4 ай бұрын

Mine bleed black dust when I apply water to them. Aggravating, may need to be painted.

@rickbarg3980 17 сағат бұрын

An easy fix

@reowhite4862 4 ай бұрын

Just wrap them with gloss black vinal wrap.

@williampinchbeck4321 5 ай бұрын

Could you ceramic coat that?

@imjoshv 5 ай бұрын

for sure! it will definietly help but even a 9h hardness coating wont prevent it completely. Because its so soft to begin with... The final result would most likely be harder than it oroginally was but still no where near the 9h since the substrate is softer. PPF is a great choice as well

@Admin-ie9hp 5 ай бұрын

I throw ceramic after a panel wipe after the steps.

@imjoshv 5 ай бұрын

Yea that’s a good idea!

@JohnBlakeJr 5 ай бұрын

Wow! That Wizard 32 Oz bottle is $50. They need a smaller sized bottle for “car enthusiasts”. I’m ordering PPF of my pickup truck’s piano pillars.

@imjoshv 5 ай бұрын

Try to do a search online I think they have 16oz bottle but the only one I found on Amazon was the 32oz. The one I have that I have came in my glovebox monthly subscription and it’s 16oz. Not sure if that was just for a sample or if they actually sell it that way but worth looking