How to fix your air compressor that’s humming and tripping breaker.

Рет қаралды 27,106

Жыл бұрын

Save money and repair your air compressor. This repair is in reference to a humming and tripped breaker on a Ridgid OF25135CW.

Пікірлер: 21

@williamgarrity9482 Жыл бұрын

Thanks for your time. God bless yall real good.

@jerseyjer8542 7 ай бұрын

Hello Friend, I hope you were able to fix your compressor. Have a great day!

@Chrissmith857 Жыл бұрын

All that is in that check valve is a light spring and rubber puck. The cap should almost be easy enough to unscrew by hand. Try cleaning it out and possibly change the rubber puck. You can sometimes re-stretch the spring, if it needs it.

@jerseyjer8542 7 ай бұрын

Hello Friend, It is a good idea to try and repair the parts if you can. Thanks for the tip on repairing the check valve. I hope you were able to fix your compressor!

@mgomez5606 4 ай бұрын

@@jerseyjer8542do you know the part number for oring on check valve cap?

@beautywithlove9290 4 ай бұрын

My compressor is generating very hot air making the relief valve got heat up… how to diagnose this problem

@biggreg100 Жыл бұрын

Where did you get the parts to replace the old ones no links...

@jerseyjer8542 Жыл бұрын

I was able to find it on Amazon. I have posted the links. Have a great day!

@joemalcum3123 5 ай бұрын

Great vid,i changed that valve it seems better but still sometimes its blowing the fuse ,any ideas fellows ?

@jerseyjer8542 5 ай бұрын

I would check the cut in and cut out setting. If that is not adjusted correctly it will trip the breaker. Thanks for watching and I hope it helped you. Have a great day!

@MrJalesh1 8 ай бұрын

My compressor starts then stops and cuts the fuse, what can it be? Checked the capacitors all working fine.

@jerseyjer8542 7 ай бұрын

Hello Friend, If you look on the video at about 4:49 I talk about the pressure control switch. If you have the cut out set incorrectly, the compressor will shut off due to excessive pressure. I adjusted it slowly to get the correct setting and it helped my compressor consistently run. Read the directions on the box cover to properly adjust the switch. I hope the rest of the video helps you figure out what is happening with your compressor!

@MrJalesh1 7 ай бұрын

@@jerseyjer8542 thanks for the reply, the compressor was working all fine, just one day I drained all the air and the next morning it started cutting out the fuse when I switch it on.

@florianscarion5085 6 ай бұрын

@@jerseyjer8542 I have a same problem the switch is adjusted and the compressor stacks at 5 bar