HOW to FIX your GOLF CLUB if the HEAD comes off

HOW to FIX your GOLF CLUB if the HEAD comes off | Easy Tutorial

Рет қаралды 51,592

Күн бұрын

If you have seen your golf club head come off and go flying down the fairway recently then in this video i show how easy it is to glue it back on. All you need for doing this is some 2 part epoxy glue that you can find anywhere for quite cheap which you can find in my link just below. This will take no longer than 10 minutes and will save you grovelling to your club pro or having to go and buy a new club.
------------------
⛳️ What i used in this video;
🏌️‍♂️ Araldite Epoxy Glue; amzn.to/2SkHnw1
🏌️‍♂️ Golf Shaft Beads; amzn.to/3ycCdRW
⛳️ What i use for all of my golf club repairs;
🏌️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Golf Grip Remover Rod:
amzn.to/3zOZ8V6
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
🏌️ 2 part epoxy glue:
amzn.to/2SkHnw1
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Double Sided Shaft extension for steel:
amzn.to/3zRWVrR
🏌️ Single Shaft extensions for graphite:
amzn.to/3xEiABS
🏌️ Full set of shaft extensions for graphite:
amzn.to/3d5ezPg
🏌️ White Spirit:
amzn.to/3xIjlKj
🏌️ Golf Gripping Solvent (Like white spirit but the proper stuff for regripping, a bit more expensive but it doesn't smell):
amzn.to/3zR9l3a
-------------------
📲 follow me on Instagram;
lukehanlongolf
------------------
📹 Related Videos;
🎯 How to re-grip your own golf clubs at home - www.youtube.co....
🎯 How to lengthen your own golf clubs at home - www.youtube.co....
🎯 How to shorten your own golf clubs at home - www.youtube.co....
🎯 How to remove your grip without cutting it- • How to REMOVE your own...
🎥 Related Playlist;
🚩 DIY Golf club repairs;
www.youtube.co....
-----------------
**Please note, i earn a tiny percentage of anything bought through the links in my description and that money will always be put back into making future content on my youtube video.
Thank you for your support on my channel 😎
Subscribe to play better golf 👀
#diygolfclubrepairs

Пікірлер: 22

@mizunonick1 2 жыл бұрын

Luke, I would recommend that you mix your epoxy before assembly and slide the ferrule over the shaft tip first.This will ensure that the ferrule doesn't slide. Also use 24 hour epoxy, as quick epoxy tends to be brittle.

@eriksvideos6022 6 ай бұрын

Agree, and add shaft beads to the epoxy mix instead of just dumping them in the hosel. You're using way more of the beads than is typical (more like 5 percent). I'd also be sure to wipe everything down at the end with acetone to clean up the remaining epoxy residue and any epoxy prints on the head or shaft.

@richardbrady1941 Жыл бұрын

Hi. I've had a look and can't find. You mentioned a video where the head (my driver) snaps off. Do you have a link please. Thanks

@MD-tb6eh 15 күн бұрын

Only thing I would change is mixing the epoxy before putting it on the shaft and in the club head so part a and b are thoroughly combined

@lwood5375 3 ай бұрын

I had this happen and i had a shop repair it but if flew off the again the second swing and it look like they wrapped tin foil around the shaft where the glue is 🤷‍♂️

@DASell-uz6xg 2 жыл бұрын

Nice video! Just got new shafts and don’t want to wait for the pro shop to “get around to doing it”. I was curious to what that cocain looking stuff did, thanks!!!

@LukeHanlonGolf 2 жыл бұрын

Nice! And thank you.. Yeah you could be waiting a few weeks for it haha honestly it works really well and it lasts ages too like you don’t need to use that much of it i would definitely recommend getting some if you can

@Jamalaa94 Жыл бұрын

Hi mate were is the second video if its snapped completely off?

@TAG247 8 ай бұрын

X2 on this

@TigerMarine62 6 ай бұрын

Same method but with a new shaft. Also, never mix epoxy the way he did, there will be pockets that remain sticky and never dry.

@HP-pn8jr Күн бұрын

I just duct tape it with gorrila duct tape lol

@therainman2012 2 жыл бұрын

Does this work for graphite too?

@LukeHanlonGolf 2 жыл бұрын

Yes can work for both graphite and steel

@adambarton6483 Жыл бұрын

Thanks for the video Luke. Noticed you were fixing a Taylormade M5, did it come off whilst playing? The head of my M5 PW flew off at the driving range last night. It's a pretty new club. Just wondering if it's a common issue?

@LukeHanlonGolf Жыл бұрын

Hi Adam, it didn’t come off on it’s own I was changing the shafts but it is something more common with Taylormade clubs than other brands. I work in a retailer and 99% of the clubs that come back with the heads that have come off are Taylormade 😂 they do sell more clubs than anyone else tho so there’s more chance of it happening to them because of that too I guess but just a bit of epoxy glue and it will do the job

@adambarton6483 Жыл бұрын

@@LukeHanlonGolf ahhh yeah ok, fingers crossed it doesn't happen with the others, I had to stop everyone hitting at the range so I could run and get it 😅cheers for the help!

@golfnutt1969 Жыл бұрын

I've got Taylormade P790s. I've had three shafts break in the head, and authentic that has come loose.

@CJSR.5591 Жыл бұрын

For shaft beads I use a small amount of very clean fine sand. A pinch from a tropical fish or animal store.

@LukeHanlonGolf Жыл бұрын

Do you find that works better or is it cheaper or something?

@mikeboyd3822 25 күн бұрын

That will give the glue a better key but shaft beads expand when they mix with the epoxy, sand won’t. ✌🏼

@rubenhernandez3189 2 жыл бұрын

No, no, no, please take time to look at some videos on how to install club heads, like the tour bus guys that work for golf companies, please, you're teaching it wrong 🤦‍♂️

@LukeHanlonGolf 2 жыл бұрын

😂 works more than fine for me