How to Frame Shed Walls (Complete DIY Lean-to Shed Wall Framing Guide for Modern Shed)

Рет қаралды 94,950

Күн бұрын

Grab my FREE shed framing Plans! ⬇️
atimprovements.com/modern-she...
This video will show you how to frame shed walls for a lean-to modern shed, step-by-step!
There are many different ways to frame shed walls. I built my shed walls using and 2"x4" pressure treated lumber and 2"x6" pressure treated lumber for the front shed wall headers.
When framing your shed walls, you want to plan our your wall stud layout based on the siding you are going to be using for your shed. In my case, I used 4'x8' LP SmartSiding panels for siding. Therefore, I placed my studs so that they would be positioned where the two edges of siding panels meet. The video will go through every aspect of the shed wall framing process.
VIDEO CHAPTERS:
0:00 - Introduction
1:02 - Framing the Back Wall of the Shed
4:48 - Framing the Side Walls
8:13 - Framing the Side Wall Shed Window(s)
11:58 - Framing the Front Wall of the Shed
13:21 - Building the Front Wall Headers
22:29 - Lifting the Shed Walls Into Place
29:09 - Installing the Double Top-Plate
31:25 - Cutting out the Bottom Plate at the Door's Rough Opening
32:23 - Conclusions
I am creating a complete "Modern Shed Build KZfaq Series"! Below are the other videos in the series:
Introduction to the Modern Shed Series: • I Transformed my Shed ...
Shed Foundation Options: • Shed Foundation Option...
How to Build and Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame a Shed Roof: Coming Soon!
How to Install Shed Windows: Coming Soon!
Be sure to subscribe and hit the notification bell so you don't miss any videos in the Modern Shed Build Series.
Here is a helpful resource for framing the Shed Window: atimprovements.com/shed-windo...
If you want to learn how to build the EXACT shed show in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me! Every purchase helps support the channel!
Follow me on Instagram: ATimrprovements
Check out my Blog: Atimprovements.com
🛠🧰 Below are the Tools I used in this video (some links may be affiliate)
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Level: amzn.to/3HowUDn
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Jig saw: amzn.to/3I6lcyd
Bar Clamps: amzn.to/3JjFrJe
Thanks for Watching!

Пікірлер: 71

@kanehbosm8222 3 ай бұрын

Crocs Construction baby!💪🏽. All jokes aside , your videos are very informative & simplistic.. Especially for a newbie like myself who is about to build my first 13x10 shed roof .

@AndrewThronImprovements Ай бұрын

Crocs construction for life haha Appreciate it and good luck!

@octaviodel12 5 ай бұрын

Best video I've seen on building a shed. Hot me pumped to build mine on spring 👍

@AndrewThronImprovements 5 ай бұрын

Appreciate it! Good luck with your build this summer!

@rigobertogarcia84 Ай бұрын

Thanks for the step by step. I feel way for confidence doing this myself

@AndrewThronImprovements Ай бұрын

Glad it was helpful! Good luck!

@kushalrocks123 Жыл бұрын

Amazing work! Awesome job!!

@AndrewThronImprovements Ай бұрын

Thanks!

@lopaka76 Жыл бұрын

To help speed things up, cut top and bottom plate at the same time. An have a stop block for repetitive cuts. Measure one, cut x.

@patricksmith3135 Жыл бұрын

What a great job. The Thron Brothers rule! I didn't realize how heavy the front wall frame could be until I went and lifted one smaller 2 x 4! I can't wait for the roof segment. Thank you.

@AndrewThronImprovements Жыл бұрын

Thanks a lot, Patrick! Thanks for commenting and supporting the vids - means a lot!

@melanielong6232 Жыл бұрын

Thanks for the step by step guide, it was super helpful! I appreciate the time you put into these videos and the shed course. Makes it SO much easier during the building process

@AndrewThronImprovements Жыл бұрын

Glad it helped! Thanks for watching, LeAnne.

@PershijsmachnijKherson Жыл бұрын

Hello, thanks for the great video, good luck 💗

@AndrewThronImprovements Жыл бұрын

Appreciate the continued support! Thanks for watching!

@RayRay-mf3kj Жыл бұрын

very helpful. going to make my shed now

@AndrewThronImprovements Ай бұрын

I hope it turned out great!

@danoc1432 Жыл бұрын

Very helpful, step-by-step guide! Getting ready to build my first shed and this is so helpful! Thanks

@AndrewThronImprovements Жыл бұрын

Glad it helps! Good luck with your shed!

@c-yah1325 Жыл бұрын

Did you need a permit.?

@danoc1432 Жыл бұрын

I live out in the country, so I can pretty much do what I want, as far as building in my property. I wouldn't think a shed this size would need one in a typical suburban neighborhood. If you add electric, I would definitely look into it.

@c-yah1325 Жыл бұрын

@@danoc1432 I live in a sub- Divison. The city wants a permit, and a Structural engineered plan. By the way, mine will be a 10X14

@danoc1432 Жыл бұрын

@@c-yah1325 Wow. Good luck! Hope it turns out good!

@ChefsBackyard 3 ай бұрын

Love the shirt, thanks for the tips. Im looking to make a floor to put my bbq pit on. Would 2x4 at 16inch be sturdy enough?

@Joey-cruzzin75 9 күн бұрын

I like your videos and I really like how you have the the cad drawing. I was thinking about trying to find that CAD program that you’re using so I could do the same thing with my shed, I am planning to make. Are you able to tell me which CAD program you are using in your video?

@baronvonestacio Жыл бұрын

Can you please put all the list of all the materials for this 10x10 lean to shed. I really like it your design. I like to build my own too. Thank you much!!!

@AndrewThronImprovements Жыл бұрын

Hi Allan! I actually have all that information in my course (linked in the video). But the information in this video (and my others) should give you a good idea of the materials and what you will need. Good luck!

@thdrlfgh Жыл бұрын

Can I make 12x10 shed with your plan?

@TrudieTiger70 Ай бұрын

I have a she shed 10x 14. I need a bathroom to make it for company. It’s a lean too design. How do I add a small bathroom to the side of it ? Thky

@padraigohuard1961 Жыл бұрын

Great videos. I am eyeing that course material. ;-) Did you cut the end of your rafters on an angle to account for straight fascia boards? maybe i missd it.

@AndrewThronImprovements Жыл бұрын

Hey Patrick - thanks for watching! I did not trim my fascia boards (personal preference) but you totally can. Just use the same angle as the pitch of your roof.

@padraigohuard1961 Жыл бұрын

@@AndrewThronImprovements Thanks Andrew for answering the question.

@benius42 Жыл бұрын

I feel like the foundation is the hardest part. What did you use?

@testme504 11 ай бұрын

Stresses safety yet works in Crocs😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅

@coreysolomon6814 11 ай бұрын

What is a price for labor to build that shed and how much was the material

@6.6_Jossee 8 ай бұрын

Any idea why my back wall to this shed wobbles? How to fix it?

@dillonusrey7656 Жыл бұрын

Did you have issues with permitting or codes? I believe in my area you have to get your structure permitted if it’s on a slab like yours. Did you have any professional help when designing the framing? Looks great hope to try something similar myself some day.

@kevineric7274 18 күн бұрын

Should it all be PT?

@user-vp3wp8bp7m 6 ай бұрын

was wondering why you showed some of the measurements except the height of the front wall unless I missed it LOL

@nanidaddy32506 5 ай бұрын

How is anchored to the ground

@bebe79938 Жыл бұрын

What software program did you use for the framing images?

@bebe79938 Жыл бұрын

Great video. Just read your comment on the CAD prrogram from another subcriber. Thank you!

@RandomPerson-bd2hv Жыл бұрын

What does "crown up" mean? and why make sure the studs are all crown up? Curious. Thanks for the great vids.

@AS-cq6uq Жыл бұрын

You could easily google this....

@RandomPerson-bd2hv Жыл бұрын

@@AS-cq6uq Already did. Thanks for the "pro tip" ;) it's not so much a question but a nudge for instructing on video...

@travisjohnston1923 2 ай бұрын

You actually can put too many nails in a piece of wood. Wood relies on the connection between the fibers for its strength. Every time you poke a nail or screw in you weaken it. That's not to say to go too few. General rule of thumb is every 12 inches. A bit short is okay, just be careful. Also not saying you have to measure unless You're unsure what 12 inches looks like.

@smoke89001 Жыл бұрын

What cad program do you use?

@AndrewThronImprovements Жыл бұрын

Hi! It's SketchUp - free version

@terryroberson4933 Жыл бұрын

It would have been nice to see how the roof Joyce and siding was installed

@AndrewThronImprovements Жыл бұрын

Hey Terry - I have detailed videos showing every step of the project on my channel. Feel free to check them out if you are interested!

@nik-woo Жыл бұрын

Are you using treated lumber on the framing?

@AndrewThronImprovements Жыл бұрын

Yes but only because it was cheaper (if you can believe that) at the time of purchase. Supply chain was crazy at that time.

@smitaaay 10 ай бұрын

31:21 Attempted your Strength Test. Arms have disconnected from my shoulders. Fell on my butt. Wife is laughing at me. Please advise.

@aaronblackford981 5 күн бұрын

You must be the older brother. Classic older bro thinks he’s wiser and just knows best way without brother fighting against them.

@aaronblackford981 5 күн бұрын

But good job regardless.

@ALJessica Жыл бұрын

These videos are great BUT… You only mention the support 2x4 to prevent the front wall from tipping if you do this alone. That is the only safety tip you share - I find it very irresponsible to work in crocs. You should be wearing safety boots, should one of those Walls fall onto your feet it would crush The bones to dust.

@AndrewThronImprovements Жыл бұрын

Hi Jessica! You are totally right. Crocs are definitely not the safest construction shoe on the market - that’s for sure. Steel toe boots are definitely the better bet. Thanks for watching!

@ALJessica 8 ай бұрын

@@AndrewThronImprovements what software did you use to make the drawings at around 1:02 ?

@AS-cq6uq Жыл бұрын

Never listen to someone building things in crocs. So much bad advice in this video lol

@thejazzjuice 8 ай бұрын

Like what ..? What things would you do better or not do at all?

@mnight207 Жыл бұрын

Cool. But as a framer/carpenter I must say its a waste of material when you frame corners like you did. Should, instead, use the California method. You can still sheet the walls with no problem, but use less material. God bless

@AndrewThronImprovements Жыл бұрын

I totally hear ya! I’ll consider that method next time I have a wall corner I’m working on. I’m sure there are a bunch of ways that you could “value engineer” my construction methods. The 10” rafter spacing is probably another lol. Thanks for watching!

@helenrobinson8137 Жыл бұрын

ᑭᖇOᗰOᔕᗰ 😊

@johnkillen3772 Жыл бұрын

Awesome series of videos! I'm going to be doing a bit of this soon and was wondering, what the software program you are using to do the plans you show in 3D. I'm going to be doing larger and am chasing something like this. Thanks again!

@kelsyec5419 Жыл бұрын

we have to pay 100 bucks to get the dimensions???

@chuckyt9083 7 ай бұрын

Without wasting time and you're wasting time 😂

@dukemackeydavid1 Жыл бұрын

WHY ARE YOU BOTH WEARING FREAKING CROCS????? Everything else was great, but my Lord guys, those are a slip, trip, fall or crushed toe waiting to happen :(

@stabrovskyiteam Жыл бұрын

Ты приколист, продавать эту чушь, 3 6ас люди не настолько жадные и дают такие проекты в открытом доступе или за 10-15$ целые дома с раскроем материала и тд, а ты гонишь, сарай продавать.