How To “French Cleat” Like a PRO | What I’ve Learned, and What WORKS!
Рет қаралды 137,610
2 жыл бұрынGet Your French Cleats Here: www.aglimpseinside.org/store/...
--------------All Of My PRODUCTS -----------------------
A GLIMPSE INSIDE STORE: www.aglimpseinside.org/
To Help Support Us and The Channel, Click Below
/ aglimpseinsideprojects
French Cleat Inspirations
PeteSquared - / petesquared23
Steve at Making at Home - / makingathome
Specific Love Creations - / specificlove7
1/2 CLEAT FORMULA
USING A PIECE OF 6” WIDE, 3/4 “THICK PLY
saw fence is at 6 in
subtract 1/2 the width - that'd be 3 in
subtract 1/2 the thickness of the ply - that'd be 3/8 in
subtract 1/2 the thickness of your blade - that be 1/16.
this would leave you with you fence at 2.5 in + a tick added due to plywood being a bit under sized
The Evolution miter saw here: store.evolutionpowertools.com...
my french cleat playlist
• This FRENCH CLEAT Desi...
A Huge Thank You to My Patrons: Updated List coming soon
----------------------------------------- YOU ALL!!!------------------------------------------------
Channel Sponsor www.totalboat.com
enter 'glimpseinside" at Checkout for 10% off your order!
2 Part High Performance Resin Here:
www.totalboat.com/product/hig...
www.totalboat.com/product/tot...
halcyon here:www.totalboat.com/product/hal...
---------------------------------------------------------------------------------------------------------------------------------
NEW PENGUIN CNC HERE
pcncinc.com/product/penguin-c...
bitsbits.com/ use code "Glimpse10" for 10% off your order!
www.starbond.com use code "glimpse15" for 15% off at checkout
www.vectric.com/ the CNC software I use.
Follow me on Instagram - / _aglimpseinside
--------------------------------------------------------------------------------------------------------------------------------
Amazon Affiliate Links
------------------------------------------------------------------------------------------------------
Great gifts for makers:
Locking Casters amzn.to/3biR0zT
Squeeze Bottles - amzn.to/38xQRXU
Deli Containers w/Lids - amzn.to/2YLwoKS
Tadpole Tape Cutters - amzn.to/2PKrKJ0
Diablo 60 tooth 10” fine finish blade - amzn.to/35nCxzd
100 PK Utility Blades - amzn.to/2PLsBJl
Paste wax - amzn.to/34lX99J
Finishes and solvents
Paste wax amzn.to/2NsxEwM
Wipe on poly amzn.to/2NvDM7e
Halcyon Clear amzn.to/2EcKZVS
Mineral Spirits amzn.to/2tFzXTX
Tools
Cordless angle grinder amzn.to/2Ex6EZY
Cordless circular saw amzn.to/2XrJJXp
Cordless drill/driver combo amzn.to/2Xrp0TY
Cordless router amzn.to/2IFSg5U
Cordless mini blower amzn.to/2BVLwLg
Pneumatic brad nailer amzn.to/2ExKQ0A
Air compressor amzn.to/2BUqr3V
Glues and adhesives
Wood glue amzn.to/2IE0343
Epoxy resin amzn.to/2H44cw0
5 Minute epoxy amzn.to/2Xq3W03
Spray glue amzn.to/2EfReId
MISC
Plastic Pastry Bags- amzn.to/2PuwYIO
Deli storage Containers amzn.to/2DYpjx0
Clamps
24” bar clamps amzn.to/2Nt2K7o
12” HD f-style amzn.to/2SuOrAa
Quick release clamps amzn.to/2Numckh
Tape
1 3/4” blue tape amzn.to/2UaWdRk
1” blue tape 3pk amzn.to/2Vz1Hpr
Gorilla Tape, Strongest ever amzn.to/2SBZRlB
Tyvek Tape, Best for resin masking amzn.to/2C1eOIv
Wood grain duck tape amzn.to/2EsEQEU
@carlykazlauskas8039 5 ай бұрын
You just made my life so much easier!!! I'm not handy at all but my 10-year-old wants to learn so I'm getting him supplies to build a workbench for Christmas. I came on KZfaq looking to find out how to hang a peg board and I found you! Just ordered cleats and brackets from your store. My son is going so impressed with me! I'm sure he will be watching all of your videos from now on. Thanks for making life so easy for beginners 😁
@AGlimpseInside 5 ай бұрын
Thank you for the support. So glad he found a video and thanks for checking out what we do. I think your order should be to you by now or maybe in the next day or so. Anyway, enjoy let me know if you need anything else.
@rickpouley2857 2 жыл бұрын
Chris is the real deal. He stands behind his work, and makes quality parts for the woodworking community.
@AGlimpseInside 2 жыл бұрын
Thank you for the support Rick really do appreciate the kind words my friend
@bobd. 2 жыл бұрын
1/2 CLEAT FORMULA USING A PIECE OF 6” WIDE, 3/4 “THICK PLY saw fence is at 6 in subtract 1/2 the width - that'd be 3 in subtract 1/2 the thickness of the ply - that'd be 3/8 in subtract 1/2 the thickness of your blade - that be 1/16. this would leave you with you fence at 2.5 in + a tick added due to plywood being a bit under sized --stated another way-- F = Fence setting required to split piece in half with 45 deg. cut W = width of stock to be cut in half T = thickness of stock B = thickness of blade F = W - (W/2) + (T/2) + (B/2) F = 6 - ((6/2) + (.75/2) + (.125/2)) F = 6 - (3 + .375 + .06250 F = 6 - 3.4375 F = 2.5625" (2-9/16")
@AGlimpseInside 2 жыл бұрын
This is so cool man thanks for doing this
@billdodson5703 2 жыл бұрын
Helpful maths - thanks
@Blfisher82 2 жыл бұрын
I just have one thing to say to you sir… GENIUS!!! Pure… unrefined… uncut… GENIUS!!!
@petesquared23 2 жыл бұрын
You are awesome Chris! Thank you so much for the shout out 👍🔥🔥🔥❤️😀
@tonynguyen632 2 жыл бұрын
No formula added to the description. Thanks!!!!! Love your channel
@SpecificLove7 2 жыл бұрын
Thank you so much for the shout out. I love the way you use brad nails at each screw point, that is a great idea. It'll definitely help me put some future cleats up easier. And your new/old building looks like a great place for your shipping station.
@AGlimpseInside 2 жыл бұрын
You got it brother. You are a fountain of information on the topic your shout out is well deserved.
@joeolejar 2 жыл бұрын
Great looking space!
@brentfowler2317 2 жыл бұрын
Well done brother. The new space looks great.. keep up the great work! And the great videos!
@jameslennon5330 2 жыл бұрын
Hi Chris from over here in Ireland. Great job Chris , love your work and your inspirational ideas.
@MegaSchew 5 ай бұрын
just found your channel and website. LOVE IT!! your products have given me so many new ideas for how to organize. Thank you.
@shanehertzog5812 Жыл бұрын
I really like your woodwork in French cleats. You make really great projects.
@WoodenLegWoodworking 2 жыл бұрын
Very cool transformation sir! 👍
@sparkyarch 2 жыл бұрын
Very nice dedicated space. Congrats!
@paullobwein1632 2 жыл бұрын
Love your work Chris! Great little new set up. Holy smokes I never realised when installed properly you would hold that much
@MCsCreations 2 жыл бұрын
The new place is looking sweet, Chris! Really nice! 😃 Brilliant idea about offering cleats like that! Stay safe there with your family! 🖖😊
@claytor920 2 жыл бұрын
This is the first video I've seen mention the width of the cleat AND the spacing between them. I like the look of 10" you mentioned and I'll be using that when I rework mine. Thanks!
@EveningWoodworker 2 жыл бұрын
Chris, you're killing it!! Great video once again and I'm glad your shipping operation is getting so big that you actually need a shipping building!! Keep up the good work and for being an inspiration to all of us!
@AGlimpseInside 2 жыл бұрын
Thank you Jered. I really appreciate it buddy!!
@randyscrafts8575 2 жыл бұрын
Great idea for the back of the mobile hanger pieces to hang right side up or upside-down depending on the need. It's like two hangers in one.
@tlynch918 2 жыл бұрын
Love it! Thanks, Chris, for answering all the questions in my head about French cleat shop wall setup. Looking forward to putting your wisdom to work.
@AGlimpseInside 2 жыл бұрын
You’re welcome Tom. Thank you brother
@lefty1024 Жыл бұрын
Thanks for the details
@bradleytuckwell4854 2 жыл бұрын
Nice job. I can see how happy you are now knowing you don’t have to go back to your previous job in the bakery. I’m so glad it’s working out for you and you get to spend more quality time with your family. Dig your channel thanks for sharing
@AGlimpseInside 2 жыл бұрын
Yeah it’s a nice feeling. Knowing that I finally get the carve my own path through this maker world!
@odarkthirtywoodworks3543 2 жыл бұрын
Hey brother, you are a phenomenal maker and an huge inspiration to all of us!! Thank you for what you do!
@AGlimpseInside 2 жыл бұрын
Thank you brother means so much
@tom.coomes 2 жыл бұрын
Selling cleats is a really good idea. I hope it goes well for you as well as everything else.
@nareshtailor4474 Ай бұрын
Great job.
@stevemoseley9877 2 жыл бұрын
Thanks for the kind words Chris. Great video on making your cleats and installing them. You nailed it with the essentials on how to get them uniform and taking off that sharp edge. Way to go man! I'm excited to see you using the new shipping station.
@AGlimpseInside 2 жыл бұрын
You’re very welcome Steve. Well-deserved and happy to give you a nod. Hope you’re doing well and keep doing your thing
@SawdustmakerLori 2 жыл бұрын
Love french cleats and really enjoyed this video! Thanks for some great tips too. It's so nice for you to have your office/shipping area separate from the shop now.
@AGlimpseInside 2 жыл бұрын
It is very nice thank you so much I appreciate you checking it out take care Lori
@mishellekochel4510 2 жыл бұрын
My basement is full of them and several of your tool and shelf holders...with more to come!!!
@sherrysullivan3495 2 жыл бұрын
I thought I had a goofy brother but man you the Goof is dude I've ever watched
@shaynesabala Жыл бұрын
You are probably the only one that has a wood wall to attach too. What a pain to find the studs in my garage. I rebuilt my entire house and struggle to find studs in my garage. Gezz.
@ianpearse4480 2 жыл бұрын
Very nice matey.
@CyberBobCity 2 жыл бұрын
Man what a great Shipping Shed!
@peterjf7723 2 жыл бұрын
I have been using French cleats for years. I didn't know that they were called that for ages, we called them split batten fixings. Maybe a regional difference? I am from the UK. I have also used an extruded aluminium version for pictures that was sold using the name Z bar hangers.
@chrisvaseywhiteroselofts3511 Ай бұрын
Great videos mate, thanks all the way from Easington in the North East of England
@AGlimpseInside Ай бұрын
Thank you so much, brother. I really appreciate it.
@wizzbang6actual Жыл бұрын
I find it out that KZfaq just now started showing me your videos. Great work, can't wait until another rain day here in Milford to catch up on more of your videos...😁
@siasgal62 Жыл бұрын
Awesome video and very inspiring. This 62 grandmother is going to give it a go to build a cleat wall for 10” plant boxes. I’m confused as to what “subtract 1/2 the thickness of your blade - that be 1/16” are all blades the same? This would leave you with you fence at 2.5 in + a tick; what’s a tick? Thank you.
@stomperthemixer1 2 жыл бұрын
Hope your well Chris. Awesome video as always and when I hear the word French Cleat I always see your face. I too have the Evolution range and a happy user, from the Rage 5 table saw - R210SMS+ 210mm Sliding Mitre Saw and the Evolution R185CCSX+ 185mm Track Circular Saw. Looking forward to the new video of your Shed and the build. stay safe buddy.
@AGlimpseInside 2 жыл бұрын
Hey buddy good to hear from you. Hope all is going over across the pond well for you. Good to hear from you I mean it. been wondering how you been
@stomperthemixer1 2 жыл бұрын
@@AGlimpseInside A little busy with work at the moment but still here Chris playing catch up.
@RichardMartin-vr8ug 2 жыл бұрын
Great video and links - anyone used OSB 3 particle for the cleats, hobbyist so birch plywood not within budget.
@mariushegli 2 жыл бұрын
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
@_WillCAD_ 2 жыл бұрын
Awesome idea to sell cleat packs to go along with all of your great cleat products. I have a feeling there are a lot of folks out there without table saws who will love this new option. I've seen a number of SLC's cleat vids. The guy is a genius at French cleat tool holders and accessories. But I gotta tell you, Chris - you're definitely in his league. Your tool holders have always been innovative, practical, and elegant, including the products you sell.
@AGlimpseInside 2 жыл бұрын
Thank you will I appreciate the kind words more than you know
@SxmTech101 2 жыл бұрын
Nice
@DanaOredson 7 ай бұрын
That body-weight test really gives confidence that it's sturdy!
@TheAyotteMan 7 ай бұрын
It looks like I have a similar building as yours. Do you have a video how you approached hanging your plywood to your metal studs? I looked…didn’t see anything. Thanks
@You2datube 9 ай бұрын
Do you have a video showing how you built that floating tabletop? I would love to how that’s built to prevent it from sloping.
@claytonreed7489 Жыл бұрын
Chris can a slat wall be used for french clets?
@lucasjw 2 жыл бұрын
Great job, both on the new space and the description of making French cleats. I have put a lot of French cleats in my shop area, too, and I ended up with something eerily similar to what you use-the sizing, spacing, process, and other details you describe are what I’ve found work really well, too. I really wish there’d been a video like this back when I put together my space! My one main difference is that I put my cleats over drywall-not ideal but with a little beefier screw I’ve found it’s possible and they work well. But, yeah, go with the wood walls, if at all possible!
@AGlimpseInside 2 жыл бұрын
Definitely a great sister. Even overdrywall into studs is really all you need. I definitely do a bit overkill but it’s what I think works best because I got a little kids running around
@Blue60 2 жыл бұрын
Hi can’t find the formula for the cleats?
@filldev Жыл бұрын
Great work (both the woodwork and the video). Do you use the same width for the cleats on the tool side as you have on the wall side? Or do you vary according to weight? Thanks.
@AGlimpseInside Жыл бұрын
A little bi smaller is what I do. Seams to work well
@gamerscircle 8 ай бұрын
Can you please link the harbor freight counter sink you showed? Ty
@scottmorris4914 2 жыл бұрын
A great video, very instructive. Thank you. I have a question. What made you decide to cut strips 5 1/2” wide. Why not the 6” you used in the formula you provided. Or any other wide for that matter?
@scottmorris4914 2 жыл бұрын
Well, I figured it out near the end of the video. 5 1/2” when cut in half, with 1/8” cut off, leaves you with a 3” cleat. Got it.
@robertbenton9920 2 жыл бұрын
Great video! I've been adding cleats to my shop slowly. My walls are OSB rather than baltic birch like yours. The great thing that baltic birch provides is strength and attaching the cleats directly into studs isn't necessary. Would you trust cleats drilled into OSB without drilling into the studs behind?
@AGlimpseInside 2 жыл бұрын
Yes I would. I would make sure that the screws were appropriately sized maybe a quarter of an inch longer than both materials combined and a tip about OSB and strength is screw in the screws at a slight left and right angle 10 or 15° alternating every other screw this will give you a little bit better hold
@cheryltaylor107 2 жыл бұрын
Hi Chris, great video thank you. When I asked about cleats they were about 2 1/2 and 45s on both sides, did that change. That's what I was doing when I got a "kickback" so now I'm not sure if I was doing it the right way? Thank you
@AGlimpseInside 2 жыл бұрын
Yeah that would be fine I just made these a little bit bigger that way they can be just a little bit stronger but really the difference is pretty negligible
@1927Scavengers Жыл бұрын
Do you have stock in Baltic Birch. It’s everywhere. Big box on the west coast of Fla is $90 sheet.
@WoodUCreate 2 жыл бұрын
Hey Chris, did you have a video on your shipping stations cleat build? I need to build a desktop against my walls, in a corner configuration as well. I was thinking I needed some form of gusset below to provide strength? I'm thinking of building the cleat wall onto my drywalled room, studs are metal and for now I have access to the backside of those walls if needed. My desktop/counter will be about 20" deep, so my biggest concern is that triangular gusset question. Thanks Chris.
@AGlimpseInside 2 жыл бұрын
Yeah I think it’s about 30 videos ago Thanks for the kind words James I appreciate it
@tyyoung3698 Жыл бұрын
hey Chris, great video. Thank you. You may have said this in the video, but if so I missed it ... what thickness of birch ply are you using for the panels themselves?
@AGlimpseInside Жыл бұрын
3/4 of an inch through and through. Thanks for the kind words.
@nwembly 10 ай бұрын
If you don’t own a laser level (as you mentioned; and not everyone does of course)…You could use a chalk line. Just make sure to use the right type of chalk “permanence level” (your most comfortable with. Preferably just a level 1 (or 2) so if you make a mistake you can remark.
@sodium35mg 4 ай бұрын
Great video! Would you consider glueing the cleats to the wall? Thanks
@AGlimpseInside 4 ай бұрын
No, I would not do that just because you might need to move them around every once in a while. I’m actually in the process of changing things around where I’m glad I didn’t because I’m having to take them off and put them in different spots.
@MySickstring 2 жыл бұрын
Love the Brad nail trick brother! I make my cleats all with double bevels. Saved me a ton of cuts.
@mellymel1100 4 ай бұрын
Gave you a like but let me ask: is there a video for that counter and how to affix the cleat to the back to make it go on the French cleat system?
@FishNDoogie 2 жыл бұрын
Awesome video Chris!!! Have you tried the dual bevel cleats at all? Like you talked about the ones Pete made? Do you think you would offer the dual beveled cleats?
@AGlimpseInside 2 жыл бұрын
Yes I have a few of those in my Shop as well and I like them too. Those are fantastic if you’re going to space them close together with even spacing across-the-board. That’s ideal for that system
@FishNDoogie 2 жыл бұрын
Do you think you would sell the dual bevel cleats also?
@davidsea235 4 ай бұрын
Hey Chris does the French cleat have to be cut exactly in the middle? And can I use miror glue to glue to back of heavy frameless miror
@AGlimpseInside 4 ай бұрын
No, it doesn’t have to be cut exactly in half. I only do that so everything matches up. Especially because I sell the cleats. Furthermore, yes you can use that mirror adhesive and you should be in good shape.
@JCMoorer 2 жыл бұрын
I'm looking to do plywood walls in my shop being built. What thickness of plywood did you use for the walls?
@AGlimpseInside 2 жыл бұрын
3/4 in. Totally worth it
@bobhaig8957 Жыл бұрын
What size screws do you use?
@scottmorris4914 Жыл бұрын
How thick is the plywood you put on the wall?
@isaach1447 2 жыл бұрын
“A Glimpse Inside” AKA…”The French Cleat Channel”😂👍🏼
@sandramckee6422 Жыл бұрын
I ordered your French cleats and drill holders. I’m setting up a tool & fasteners area. Table saw not 👀 to buy one yet. Navy Girl in Williamsburg VA.
@AGlimpseInside Жыл бұрын
I saw that thank you very much actually packing them up this morning. Thank you again for the support it means a lot to us!
@dngriffiths8105 2 жыл бұрын
Hello Chris. Love your French cleat videos. One detail I never seem to catch is the thickness of your cleats. Can you provide? Thanks.
@AGlimpseInside 2 жыл бұрын
Material is 3/4 of an inch thick and is 3 inches tall is the highest point
@dngriffiths8105 2 жыл бұрын
@@AGlimpseInside You're a good man, Chris. Thanks for all of your insights and tips.
@mmfenske1 2 жыл бұрын
Hi Chris, Great video and information. You mentioned that you used a Harbor Freight 3 piece counter sink bore. I went to the Harbor Freight website and entered that description and could not get their website to respond at all. Could you please reply with the link and consider adding it to the other links you have for your products used. Thanks, Myles
@AGlimpseInside 2 жыл бұрын
www.harborfreight.com/power-tools/drill-driver-bits/woodboring-bits/countersink.html
@chubbybeaverwoodworks5027 2 жыл бұрын
how much did it cost to insulate with spray foam? been thinking about doing that for some time but wanted to get a ballpark idea on cost.
@AGlimpseInside 2 жыл бұрын
There’s a minimum cost to this. So we wrapped up actually spraying two sheds. So if I was gonna get one shed it would’ve been 1800 but because we did too it was 1300 each
@davidlee4576 2 жыл бұрын
Gotta make room but I’m gonna get some to hang my kayak!
@AGlimpseInside 2 жыл бұрын
Oh that would be awesome.
@jimmowers7675 2 жыл бұрын
Great system. What brand was your mitre saw?
@AGlimpseInside 2 жыл бұрын
Evolution is the brand. Famous for being able to cut so many different materials
@jimmowers7675 2 жыл бұрын
@@AGlimpseInside , is that the blade or the saw?
@timcoulson7340 Жыл бұрын
How long are the screws you use to mount the cleats to the wall? I am considering a French cleat system on a concrete block wall. I will mount a 3/4" piece of plywood directly to the wall. If my cleat is 3/4" with a 1/4" counter sink, and my wall is 3/4" that means I have to use a 1-1/4" screw which seems kind of short.
@johnstarkie9948 15 күн бұрын
I’m confused. Why don’t you screw the cleats directly to the concrete blocks?
@The_Bearded_Lady Жыл бұрын
Getting ready to cut a bunch of plywood cleats to go with some gifts I got from your site and for some stuff in my space too. With the cost of nice plywood, I am trying to get as much as possible out of each sheet... So please forgive the extra questions: Using 4'x8' sheets of plywood and an 1/8" kerf blade... that still takes a bit off things... so are you shorting each piece just a bit so you can get all eight almost 6" pieces or are you doing a true 6" for most then just losing the last one (eight cuts with 1/8" blade loses 1") and using that 5" piece as scrap for something else?
@AGlimpseInside Жыл бұрын
I ripped down 5 1/2 inch wide strips that are cut from half of that 4 x 8. So essentially I have a bunch of 5“ x 4‘ strips then I rip those and have to make two cleats. Then to cut the Klica angle my blade over 45 of course. And then sit in my fence to roughly 2 1/4 inches. Give or take an eighth depending on your set up
@The_Bearded_Lady Жыл бұрын
@@AGlimpseInside cool thanks
@simonr6793 2 жыл бұрын
I'm going to take a wild guess and say the business is definitely doing great with the new shipping area coming into force. The next steps brother is taking on staffing to make the whole process go smoothly so you can just spend your time in the workshop creating new an innovative designs. Great to see you doing so well brother and I hope you're family is all OK, any news on your wife's condition or is she still going through the mill?. As always brother 💯% 👍 🇬🇧.
@gregpreston7301 2 жыл бұрын
Hi Chris. Did I miss the bench build? Is it suspended solely on the cleats? Is one side also on the cleat wall? It seems to heavy to not be supported on at least one side. Anyway, nice Jobe. Good content as usual. I'm gonna go check the links now. I appreciate all you do. Thanx, Greg
@AGlimpseInside 2 жыл бұрын
kzfaq.info/get/bejne/gLZgjNRj1reaYYU.html Here’s a video of the wall mounted workstation. It’s supported just on the one wall. You can see the infrastructure in this video and how I was able to make it all work
@gregpreston7301 2 жыл бұрын
@@AGlimpseInside Thank you. A good build. I don't have CNC but the design is pretty straight forward so I'm gonna try it 'old school's. I could see these brackets for temporary outfeed/indeed and other applications
@patlaw53 2 жыл бұрын
"subtract 1/2 the thickness of your blade - that be 1/8 in " That be 1/16".
@AGlimpseInside 2 жыл бұрын
Pat thank you so much it’s been fixed. I was in a rush I apologize. I had to make my daughter Ramen lol
@patlaw53 2 жыл бұрын
@@AGlimpseInside It's all good!
@scottmorris4914 2 жыл бұрын
Ok, another question. You said you would go anymore than 11” between the screws. My walls are drywall, so I would have to put screws in every 16”. Now my plans are only to hang tools, so crushing the drywall hanging a desk is not an issue.
@kirbyspencer538 2 жыл бұрын
Notice he didn't show the engineering on that 11" statement? Use 2.5" deck screws into your studs and you'll be just fine.
@AGlimpseInside 2 жыл бұрын
Man I got nothing to hide. I do the 11 inch mark because it’s just what I found comfortable withholding up to 500 pounds. That’s hardly rational with the system it’s usually overkill as you see I get up on this furniture I make hanging on Cleat walls. But absolutely 2 1/2 inch screws into the studs is well within reason
@kirbyspencer538 2 жыл бұрын
@@AGlimpseInside Chris, sorry, wasn't trying to imply you were up to something, just that your 11" number wasn't formulaic (like your halving a board with a 45° cut), it was [more informally derived]. And of course the main point was to re-assure Scott that just attaching to the studs would work fine for him.
@philipsondreal6565 3 ай бұрын
In your directions for calculating where to set the saw fence when cutting the 45 degree, it says "½ Cleat"; I assume that means "cutting the 6" wide strip in half," not ½ inch cleat, right? Because you are using ¾" plywood, not ½" plywood - just checking. Also can I use ½" plywood on the wall instead of ¾" (then attache the ¾" plywood strips to it)?
@AGlimpseInside 3 ай бұрын
Yes, it’s cutting them in half. To give you two identical strips.
@beckirae100 2 жыл бұрын
First one I've seen put two screws. Wish I had the money to buy all that plywood to do my shop.
@kurtopalka5201 2 жыл бұрын
Can you just come and do my shop? Looks great!
@AGlimpseInside 2 жыл бұрын
It’s in the description no I totally forgot
@nwembly 10 ай бұрын
TIP: Put 1 rubber band on & around on both ends of your level(s); especially for longer levels and working by yourself. It prevents the level from slipping/moving around.
@brokedowntrucker60 2 жыл бұрын
Nicely done, you forgot the glue! Lol!
@AGlimpseInside 2 жыл бұрын
Thanks however I never put glue on my cleats especially on the wall
@timlawrence3906 8 ай бұрын
Chris, I have a question about the Birch plywood. Why do you and all the other woodworkers on KZfaq use it for everything (cabinets, etc, I understand) ? My Home Depot Chargers $90 a 3/4" sheet for it and $40 a 3/4" sheet for RTD (regular unsanded?).
@AGlimpseInside 8 ай бұрын
It comes down to stability and lack of voids inside the layers. I personally need the aesthetic of the multiple layers. As they just look better. The veneer on both sides is also much thicker where you won’t blow through it when sanding.
@timlawrence3906 8 ай бұрын
Ohhh, less voids and thicker outside veneers. Definitely great reasons to go for it instead of just because it looks nicer! Thanks!
@peterzammit9029 2 жыл бұрын
Can you tell me the name of the song you used in the intro of this video? I've been trying to find out what it is for ages and it's driving me crazy!
@AGlimpseInside 2 жыл бұрын
Absolutely. The song is called parasail
@peterzammit9029 2 жыл бұрын
Thank you SO much! The craziness ends now!
@peterzammit9029 2 жыл бұрын
Aaah not that one lol the one with the whistling By the way, subscribed!
@michigan_616 Жыл бұрын
Can this be done with a circular saw?
@AGlimpseInside Жыл бұрын
Yes but I don’t recommend it can be a bit dicey but you can do this with clamped straight edges and a little bit of skill. It’s all about what you’re comfortable with
@JustinF89 2 жыл бұрын
Hey do you sell your french cleat phone holder?
@AGlimpseInside 2 жыл бұрын
Unfortunately no. Maybe I should design one of the CNC though
@JustinF89 2 жыл бұрын
That would be awesome! Could also make it so a wireless charger could fit in behind some how. Just an idea! Keep up the great work!
@powder749 2 жыл бұрын
Not a bad gig... $24 for essentially 1 strip of an 8 ft sheet. Home Depot in Florida has a 4x8 sheet at about $80. You can get 18 strips from a sheet. $24 x 18 = $432 - $80 = Net Profit of $352. Not sure how much to ship, but I'm sure it's not much with the volume you deal with. We'll say $5/ package. That's another $90. That brings the net profit to $262. Figure at the most 1 hour labor... probably a half hour more like it. $524 an hour. I ain't mad at ya. Congratulations on your success!
@AGlimpseInside 2 жыл бұрын
I can appreciate the math. This stuff is not from Home Depot. Baltic cost up for of 150 per sheet around the country. And the price is rising. It also takes a bit more than a half hour. Your numbers are off. I can only wish that my profit margins could be that attractive
@heinrichschulz2000 2 жыл бұрын
If you can find good quality Baltic Birch, especially 11+ layers, at HD or any other big box stores you're lucky - and if for
@powder749 2 жыл бұрын
@@AGlimpseInside fair enough. I stand corrected. Still giving you a hearty congratulations on your success. The only thing I can see that exceeds that success is your humbleness. Just a couple reasons I subscribe to your channel. That... and your kids. 🥰
@AGlimpseInside 2 жыл бұрын
Thank you bro I appreciate the kind words. Hope you don’t mind me making the correction. I think you know why. Again thank you for your support and the kind words and check it out what we’re doing here on this channel
@DanBlomberg 2 жыл бұрын
Are you worried about the supply of baltic birch plywood given who the supplier is?
@AGlimpseInside 2 жыл бұрын
I’m looking for other options as we speak. I’m trying domestic and some from India. Looks like an alternative is not gonna be a problem to find
@douglasperry1226 2 жыл бұрын
Dude the best thing I have ever done is to do a French cleat wall for all the tools. No more drawers etc. 🤘🏼I can find tools now without searching for hours! 😂🤣🤣😂
@AGlimpseInside 2 жыл бұрын
Most definitely. I agree
@gillesdesrosiers696 2 жыл бұрын
Can not find the formula for the cleats !
@AGlimpseInside 2 жыл бұрын
It’s in the description now I totally forgot
@spacekb17 2 жыл бұрын
Chris, 6” not 6’ in the formula. Thanks for doing the math for us!
@AGlimpseInside 2 жыл бұрын
@@spacekb17 fixed thank you so much man
@mikkelkirketerp4884 9 ай бұрын
So the parallel cleats arent worth it?
@zackgilbrech6883 2 жыл бұрын
Shouldn't this be 1/16? subtract 1/2 the thickness of your blade - that be 1/8 in
@ddcott 2 жыл бұрын
I am not a huge fan of French cleats, maybe I am missing something. When I grab an item, I knock the cleat off the wall, so I end up screwing the cleat to the wall, mostly defeating the purpose of the cleat
@StanCarverII 4 ай бұрын
Add a “lock” to your cleats. Basically a piece of wood that slides between the bottom of the cleat and the bracket.
@cferrara1125 4 ай бұрын
Your premade cleats link is broken.
@TheHandystanley 2 жыл бұрын
hummm, my shop walls are 1/2" OSB....this means I have to go into each stud.
@AGlimpseInside 2 жыл бұрын
Not necessarily if you put screws roughly 8 to 10 inches apart but you angle them 10° left or right alternating the screws you get a better hold and driving them straight in
@MrRackinroll 8 ай бұрын
please
@robertlagrange6388 2 жыл бұрын
where is the formula????
@AGlimpseInside 2 жыл бұрын
It’s in the description now I totally forgot
@SomeGuy8796 Жыл бұрын
lol ... if someone cannot make their own cleats, they have no business even having them 🤣🤣🤣🤣
@jcoul1sc 2 жыл бұрын
Shame the screws are on the outside through the fair face. Your weight is spread on the 2 brackets, hardly a test
@AresGodOWar 2 жыл бұрын
Very nice profit , making about $400 a sheet of plywood cut up 😆
@AGlimpseInside 2 жыл бұрын
Not quite but don’t forget the factor in the hours it takes me to do this the shipping supplies I need to keep on hand. I know you understand all that but I don’t want anyone to think that this is just turn a profit easy money one oh one.
@AresGodOWar 2 жыл бұрын
@A Glimpse Inside of course , I wasn't saying it in a bad way , I think it's very fair , That's the kinda profit you should make
@AGlimpseInside 2 жыл бұрын
Thanks so much.
A Glimpse Inside
Рет қаралды 353 М.
Bitner Built Woodworking
Рет қаралды 225 М.
A Glimpse Inside
Рет қаралды 116 М.
Desire to Inspire
Рет қаралды 55 М.
A Glimpse Inside
Рет қаралды 92 М.
Benjamin Register
Рет қаралды 14 МЛН
VovaLika Family
Рет қаралды 10 МЛН