Original in package Furby Will not start. This is how to fix it. How to get it to turn on for the first time. Model 70-800 1998
Пікірлер: 33
@karlaclose5537 Жыл бұрын
Thank you!! I haven't heard the sound of a furby in over 20 years!! I followed everything and it worked!!! I cried!!
@stacys165911 ай бұрын
Daughter just got a 1999 Furby model 70-897, straight out of the box it wasn't working. I found this video and it worked like a charm, thanks so much!
@Scott_Tenorman_simp2 күн бұрын
Thank you! My original Furby finally works lol I’m a 13 year old and this helped a lot!
@alicewade70842 жыл бұрын
Worked good, i fixed two of them . One would not do nothing . One keep going to sleep.make sure you turn the things the right way .
@jayceecee8651 Жыл бұрын
We found our old furby baby today, probably hasn't been messed with in/around 20 years. Unboxed, still has the tag on it... Put brand new batteries in and nothing... Soft/hard reset tried, nothing. Walked around with it in my hands and it started working for a few minutes, got excited, then it stopped working. Decided to try one more time, and pressed the reset button again. I held it down for a while and next thing I knew, it came roaring to life, and works like a champ. Not saying that is the magic trick; however, it's worth it to try and hold down the button for a several seconds instead of just pressing it. I didn't press the tongue down when I did that, just the reset button. Might be useful info to someone, and thought I'd share. Thanks for the video. Naked Furby is creepy looking! 😂
@h1234e12348 ай бұрын
I found one baby furby from the 2000s and i did what you did and worked! Thank you so much :)
@TribitFanOpex2 жыл бұрын
Fun fact: the original furby uses a chip on board processor that is from 1976!
@Chevgal2 жыл бұрын
You don't need to cut the zip tie to remove the fur, just using a flat head screw driver in between the the tie and the Furby and it will pop off pretty easily
@theparanoidone71892 жыл бұрын
But how do you put it back on?
@Chevgal2 жыл бұрын
@@theparanoidone7189 Same way it was taken off, there’s a groove between the top and bottom of the base just need to slip it back on, need to have a bit of patience though I did get it back together without wrecking the zip tie.
@theparanoidone71892 жыл бұрын
@@Chevgal I see, thank you
@Chevgal2 жыл бұрын
@@theparanoidone7189 you're welcome
@sharkpuppet91622 жыл бұрын
Crap I already did that lol :l
@cuby634 Жыл бұрын
It works!!!! Thank you so much!!!!
@corinpokemon3972 жыл бұрын
This was great for me
@X_Star_Sprinklez_X Жыл бұрын
hi hi! thank you so much for posting this video but I would like to add that sometimes the time for how long it takes for you to get it to work may vary depending on a few factors such as age and quality of the furbies. After 4 hours of spinning the gears the furby began to work, although i did have the batteries in and i accidentally continued 30 mins after bc the batteries i was using already began to fry so i heard the furby making noises from the speaker but i didnt realize that i had already been successful :< pro tip: if you have the batteries in and the furby does start making noise with the speaker than it most likely works all you have to do is replace the batteries and you should be good to go and not waste another 30 mins while watching austin powers like me LMAOOO (austin powers was entertaining though so i had that for me XD)
@TheMeowthTeamV2 Жыл бұрын
i remember doing this with a furby and it worked
@whimsyricky_ Жыл бұрын
i’m gonna try this on my furb later! I’ll update if it works! edit: he works!
@M3licious Жыл бұрын
Quick question.. mine moves but makes no sound.... is there something i can do to get it making sound again?
@nono-gw7qm11 ай бұрын
Replace the speaker. Or just say he is mute, like some people are
@ashleywilliams6742 жыл бұрын
Don't skin furbys. Put a screwdriver up into its beak and spin the motor.
@Jiraiya_Sage2 жыл бұрын
How exactly did you do this? The motors appear too far away from the beak to access thru there
@ashleywilliams6742 жыл бұрын
You might need a longer screwdriver
@Jiraiya_Sage2 жыл бұрын
@@ashleywilliams674 thank you for responding but I was able to awaken him without the gear method and more importantly, without skinning him!!!
@ashleywilliams6742 жыл бұрын
@B S Oh that's great! On my first furby I got, I gently hit him on the table, and he worked!
@cmm1yt11 ай бұрын
I so don’t understand what to do to skin him
@emmat62086 ай бұрын
I can’t pop the skin off
@KatyVolik8 ай бұрын
Фуууууууууууууууу😲😖😖😖😖😖😖😖😖😖😖😖😖😖😖😖😖😖
@furby08932 жыл бұрын
It did not werk
@juliusxeresdelarosa13483 ай бұрын
i see camera under the head of furby 😨😨😨😨
@EpicFurbynerd76YO2 ай бұрын
oh please..... There is no camera... or at most, a really shitty camera that can't really capture anything....