This series is so good! Can’t wait for “How to get a free multi-level indoor skatepark/training facility”

Trucker: "Dude stole the friggin' wood on my flatbed. I was totally planning on building a kicker with it."

Advice from a Lowes Lumber employee: a lot of stores sell ripped open bags of concrete for $1 a bag. Also make sure that you are scavenging from a dumpster and not a compactor that’s is hooked up to a building. You don’t want to be inside on of those when someone inside turns it on.

The piece of wood on the trailer I’m pretty sure that belong to the truck driver. Haha. For when he’s transporting things

Step 1: dumpster dive Step 2: buy $100,000 in power tools

Chance favors the prepared mind. When you have your eyes open for something, and know where to look, you’ll suddenly feel like you’re luckier.

Free is for me... tell me more Cory and Dan.

the most iconic duo in all of Long Beach !

You guys are being so kind!! (I doubt I could order a kicker for a reasonable cost, as it would ship to EU and such, so this is very awesome!)

this series is absolutely amazing. i hope one day to open up a lil diy spot and maybe someday a full on skatepark so this information is super valuable. i admire these types of things not only because its super creative and effectively makes ramp building accessible for everyone but you guys are also using pieces of wood/materials that were just going to be thrown away and wasted. pushing the narrative to go look for wasted material instead of wasting money is not only good for skaters pockets, it instills a diy independant creative mindset but this way of thinking is also great for the planet. wasting things like lumber when trees are what give the planet oxygen never set well with me, this video was just such a satisfying watch for me. ill be a subscriber for life after this one.

I really enjoy watching these "create and skate" videos. Building then riding what you build is one of the most satisfying things in the world. One of the best thing about this channel is that the owner can really skate!

Being from LB, I love seeing all the free stuff just down the street from me 😁 love what you guys do! And shout out to Salud 🔥

It’s amazing how local this is, I know all these areas 😂

Thanks guys, this will definitely be a fun winter project to do with my kids as they wait out the snow and can skate outside again. Appreciate the specs!

I love what you guys are doing in ALL of your videos. Yall rock!

this is a really good series. Great info, some good laughs, and Cory can shred

With the amount of obstacles you guys have helped me build i almost have a skatepark

You guys literally deserve at least 500k subs. Good content and helping out the community, definitely got my sub.

This is A1 material. Love this upload, thanks boys🙌

I just found you guys today and man, you guys are amazing!

Now this is good content! I've been trying to find ways to get some free wood and I knew about some of these but for some reason just seeing yall do it on video made it more clear to me that this is what I need to do. Haha

As some who skates and uses a van for work, you sold me on the van!

This series has helped me so much since I don’t really got that much money, love the vids

I love this series! You inspired me to build my own rail and its so fun!

I was a Manger for homedepot for 6 years. Great company. Glad I have stock

thats so sick that inspired me to make one and that is what im gonna do thanks love your work

LETS GOOOO I REALLY WANTED A KICKER. Thank you 🙏

Idk if you put it on yourselves but it also has a DC logo on the back 17:12

Giving this bad boy another view because I want a keen ramp for the low😛 finna build in the basement today.

For the thing about the piece of metal at the bottom of the ramp, over here the car reg plates are 20.5 x 5 inches and they're made of plastic, works like a dream

I love these videos so much!!!!!!! Please keep making these 🔥🔥

I made this and its one if the best kickers ever. This is great thank you

bro you guys are so sick. Love the vibes

This ended up really sick. Way better than my version! Lol

You guys should try to make a half pipe I would be amazed

It has a dc sticker on the back love the video .Iv made one for me and my friend.These videos are so helpful thank you

Very nice kicker project !! You guys are so fun an generous. I'm trying to plan building this Kicker but the 10' radius seem quite steeper then yours. Could it be a 15' radius you have on these or is it really a 10' !?

Keep making these type of videos love them so much 🔥❤️

Thanks for this video I've always wanted a kicker

Please keep doing these I love these videos

This is hilarious! Such good content here, original.

I also used an old street sign for a threshold plate, but left a bit more length, transitioning from the ramp to the flat ground. The plate seems to be bending upward, away from the ground. Is this a common problem, and a reason to not leave too much length on the threshold plate, between the ramp and the flat ground?

lmao he’s explaining the wood seperators when there’s a stack of wood with separators behind him

Just saw the Sebo photo with your kicker in the new Thrasher. Sick

These guys are doing the lords work. Thanks dudes!

Kaiser Hospitals often have those construction dumpsters too. And yeah, theyre for 5 ton fork lifts

Glad I found this channel.

sweet build, also sweet board slide so clean

I love dumpster diving! So much cool stuff to find!

You’re the man Cory!

The birthday party is soooo good!! Brand that asap and do a free birthday video

just finished a little manny pad thanks to you guys

I just built a ramp using pallets and my friends suggested for me to build a kicker I was hoping for you guys to have made a video on how to make one and who would of known a few hours later you guys made a video on it

Love these videos! Can we get a how to build a quarter pipe?

What about old chain link fence poles for a pole jam or rail

do it. . do it. XD great video.

Around me they lock up all the containers around construction sites and security all over... Would be a dream come true to find places like this... I feel inspired to build something :D

in the background of when you where skating it there was the yellow pole behind that you could use the kicker to skate that

Great stuff dudes!

Whatever happened to the slappie manual pad? That 5 ft John Hill thing just too short for proper slappies...just sayin.

Sideburn hair! 🔥

Aye I have that same shirt Dan is rocking, I've had it since middle school lol

how is it to skate with sewa 😂😂 he looks exactly like him i swear. coool series love it gonna build some stuff 👍

Wow that ramp would be perfect for my local diy

Step one: Break into keen ramps workshop.

These are so rad it should be criminal

I was literally just thinking about building a kicker

Yeeeess the type of video I’ve been dying to see

I love theses types of videos I need more

I just got done building the grind box a wanna make a kicker leading up to it now lol

Nice video!!

The ones on flatbeds are needed sometimes for loads to sit on. Be careful so your not accused of stealing.

i love how theyre driven by skating and everyones enjoyment as opposed to the financial gain of running a business

Has anyone got each measurement for each piece of wood. I’m making one for a friend who’s just started skating and I have done my own version on paper but something doesn’t seem right.

Is it possible that l get all measures to build my own kicker?

this series is dope but its so hard to binge because you never set camera down, i totally wouldn't mind some time lapses and narration. either way i will still watch but, please consider a tripod!!! love it keep em. coming

Master craftsman. Master skater. Great video.

maybe do you have a template of sizes of the kicker? please upload it

Very cool thank you for sharing I wanted to ask how far apart are the ribs from each other and from The Edge and how do you apply the plywood is it drilled on to the ribs or glued? Thank you

Gosh these videos are so entertaining

These vids are well good You should for real make a full skatepark like this that would be epic Maybe invite YT skaters to skate it and give it a score etc

man what a cool business

i live near a bando and we went in side and found 3 no parking signs in a supply closet

i set up a street sign up on 2 parking curbs stacked in the 90s and was clearing shopping carts back 30 years ago- this is same principle

Is there a certain reason you guys use a drill instead of a nailgun? I'm thinking of making one and don't have drills just nailguns

can yall do a rail next?

I have a bunch of those plastic crat thongs made a box outta em put a top on for a nice manual pad

Someone was asking about buying a ramp on instagram. I dont have the money to buy one but i passed your name to them. Hope you get a sale!

“I wonder what else is in a dumpster” chris: finds a sword

That board from the semi truck trailer was actually what they keep under their trailers to use for loads for certain reasons and they actually need those and is their property.. would have at least asked the owner before grabbing that one. Lol but I’m sure they would be fine with loosing one. Hahah

can't believe you crooked that thing!

Inspiring my friends haha

thank you so much!!!!!

When they band wood together they use it to help hold the bands...

Nahh for real though, the wood on the trailer is actually essential for being able to transport loads. Not only for strapping them down securely but also for being able to remove them safely. Honestly kinda fucked up(I have to load and unload trailers often for my job)

Wish I worked there. Coolest fucking Boss and crew Dan and Corey

i built a kicker ramp for like $80 bucks total with stuff from home depot (the metal was the most expensive piece, it was like $35).

Damn u turn trash into this cool kicker ,that’s so cool

Just built my own the other day for free before I seen this, found some random scraps

Cool series, but.... My dad was a trucker with his own flat bed. When he came home it was my job to stacks those 4x4s and make sure they were secure. Those aren’t free. And they are needed to distribute the load or keep things off the flatbed.