how to get an A&P license, A crash-course for those with short attention spans

Рет қаралды 52,535

5 жыл бұрын

An A&P License is a requirement for working on aircraft in the United States. It's issued by the U.S. Government's Federal Aviation Administration (FAA). In this video I go over what you need to know about getting your A&P license. This video is mostly geared towards my Active Duty military and Veterans, but it has plenty of information in there for everyone else. If you have any questions please leave a comment. Some Helpful links are below.
For more content visit:
burnoutsandrotorblades
burnoutsandrotorblades
Source for all official information: www.FAA.gov
CFR Part 65 - CERTIFICATION: AIRMEN OTHER THAN FLIGHT CREWMEMBERS: www.ecfr.gov/cgi-bin/text-idx...
FAA 8610-2: www.faa.gov/documentLibrary/me...
FSDO search tool: www.faa.gov/about/office_org/...
Military Occupational Specialty Codes (scroll to bottom): fsims.faa.gov/wdocs/8900.1/v05...
JSAMTCC Facebook Page: / ccaf.jsamtcc
JSAMTCC FAA regulation: fsims.faa.gov/wdocs/8900.1/v05...
A&P Practical test standards and questions: www.faa.gov/mechanics/testing...
Military Tuition assistance MilTA: www.militaryonesource.mil/edu...
GI Bill Licensing and certification: www.benefits.va.gov/gibill/li...
WEAMS tool:inquiry.vba.va.gov/weamspub/b...
Vocational Rehabilitation: www.benefits.va.gov/vocrehab/...

Пікірлер: 246

@ralphwright36 5 жыл бұрын

If you really want hands on experience, find a FAA repair station. 18 months go and take the test's and you get a pay check while you are learning!!!

@gregson8533 4 жыл бұрын

Will they actually hire someone with no schooling/experience?

@abcdef-kx2qt 4 жыл бұрын

JUST LIKE THAT EAZY PEAZY

@royalwilson6640 4 жыл бұрын

@@gregson8533 no, they wont hire you like that, you can get the training from them and leave, they wont invest in your training like that

@Terkinstein 3 жыл бұрын

MRO facilities are great places to pick up experience.

@jmech2298 2 жыл бұрын

I’m 19 getting this done got 6 months left at a&p school. Man I can’t wait to finish up and get in the field. It’s a huge change coming directly out of high school and having to put my all into school as I was a slacker in high school. Soaking the information up like a sponge though since I’m so young. Hope to make my family proud.

@Domeshota 2 жыл бұрын

I’m glad to hear man! I’m 18 years old and I’m deciding if I should go to school for my a&p license, hopefully soon I will make my decision soon for it! I was a slacker in high school too but now I want to show my family I’m capable of doing something great! Anyways good luck towards in school and in life!!

@howardhughes6212 2 жыл бұрын

Learn how to weld. Welding school is 10K and you don't have to jump through as many hoops. The current aerospace company I work for I actually build shit. The mechanics mostly do paperwork and take a day to remove a part from a box.

@Domeshota 2 жыл бұрын

@@howardhughes6212 oh wow that sounds amazing! what company do you work for if you don't mind me asking?

@howardhughes6212 2 жыл бұрын

@@Domeshota I never say the current company I'm working for... but i have worked at space x, honeywell aerospace, and a bunch of other spots. I have plenty of videos on my channel

@lousenie467 7 ай бұрын

What school did you go to?

@vincinzo9428 5 жыл бұрын

Thank you for this sir, and thank YOU for YOUR service. We all appreciate it more than you know brother.....

@juiceboxmafia2434 2 жыл бұрын

Great vid. I was a crew chief on 130s in the Air Force. Good times!

@TheFunnyBone5 4 жыл бұрын

This video was extremely helpful! Thank you!

@mcbinns1 2 жыл бұрын

Thanks for your service and this video. CG just got the cool program as well in 2019. We just caught up with the other services.

@BurnoutsAndRotorblades 2 жыл бұрын

That is awesome!

@chainlandproductions820 4 жыл бұрын

Great Video Brother! I got mine one at a time 18 months each. way back in the early 90's

@chainlandproductions820 4 жыл бұрын

started out needing a job. never touched or even thought about aircraft. a company moved into my home town and i bugged them nonstop till they hired me. they got subsidized from the government so they would only have to pay half of the employees wage, $11 bucks an hour setting up shop till we got Convairs and L-188 Electras. they hired quite a fer people fresh out of A&P school along with a few other monkeys, me included. a few companies later and 24 or so years. Im a helicopter mechanic, AS350B3, with lots of other aircraft experience!!

@richgran 3 ай бұрын

Was edumacated at a collegiate a&p school back in the 80's. Long story short, I had all the courses, but didn't finish up with prelims and O's & P'S. But now, I want to pursue rotor wing, or specialize in a power plant like the PT-6. Thanks for the info. Lots has changed since the 80's.

@fomocotech 4 жыл бұрын

Thanks dude, answered a lot of questions

@modelaircraft6576 2 жыл бұрын

Good explanation sir, I completed my general and I’m studying Prepware to take my general test. The only block I didn’t like on general in A&P school was FAR

@davidjr3230 3 жыл бұрын

Your a bigger help then my commands A&P rep haha. Thank you for your service.

@BurnoutsAndRotorblades 3 жыл бұрын

Make sure to spread the word!

@franciscoramirez-nb4er 2 жыл бұрын

Very descriptive info. Thank you. In Santa Ana and looking for a school to get into

@Karina_Engr 4 жыл бұрын

Something I'd like to add. The A& P schools love to sell their material. I'd talk to a recent grad and buy their books off of them, instead of buying the $500 ea. books that we barely cracked open. Great info. AF brother.

@royalwilson6640 4 жыл бұрын

Do you have the books I will need?

@Karina_Engr 4 жыл бұрын

Shane Porter Thanks for sharing Shane. It is another option. “Best” is relative, esp. if a vocational school may be closer than a CC with an A&P. Congrats! It sounds like you found a good CC.

@Bearnoats 2 жыл бұрын

Used books are better. I agree

@kieyavorsky2188 2 жыл бұрын

this video was great thank you so much

@SustainableCraig Жыл бұрын

Great video. That was super helpful.

@BurnoutsAndRotorblades Жыл бұрын

Glad to hear it!

@indyjons321 5 жыл бұрын

This helped a lot.... thank you!

@enjoy110 2 жыл бұрын

Hi Brian❣️ Full Circle Lol I Started A Yr Ago With You Thank You For Your Service Very Much Appreciated 😇♥️✌️♥️😇 Thanks For Tour Time And Knowledge ❣️

@almarasco8088 5 жыл бұрын

Great video very informative

@epapa737 3 жыл бұрын

Thanks for helping with my Aviation 360 class

@BurnoutsAndRotorblades 3 жыл бұрын

I'm not sure how, but you're welcome just the same!

@user-ng2qx4xd1b 4 жыл бұрын

i love how you mentioned to tell supervision that your only doing the task to get your a&p. them vultures would have you doing everything if youve only done it once, lol. thank you for the information and video

@arthurleino 9 ай бұрын

I retired from the Navy 11-92. Worked mostly on Attack aircraft. Got my permission to test. Went to a 10 day class and took the tests. Passed general power plant and airframe. Got a job at a MRO after about a year took my oral and practical got my A&P, worked there 25 years and retired now March, 2019. What helped me I had a engine turn license on A7-E's. .

@matthewmartin7639 4 жыл бұрын

My O+P was $1,000 even. No fee for do overs but that was just what that DME did. I'm sure others would charge you if you failed and had to retest. He was a really nice guy. Which was good because I had to do mine over. Then I got a discount for my writtins so I only paid $120 a piece.

@coopersilberling6883 Жыл бұрын

Just started an associates program at my local college for aircraft mechanics, technically gonna get a dual AA since airframe and powerplant are 2 seperate degrees. I’m a depended of a veteran and under chapter 35 I’m getting paid to go to school so can’t beat that deal !

@BurnoutsAndRotorblades Жыл бұрын

Awesome!

@hlhl2691 4 жыл бұрын

Great video👍

@Izzy-qf1do 5 жыл бұрын

Thanks for the info. Too bad I don't qualify for the Air Force. But luckily I have a good school close by. Looking forward to this career.

@synyster9323 5 жыл бұрын

sounds like u dodged a bullet to me

@lorainemerriss8835 4 жыл бұрын

Thank you so much for this! I’m also a C130 engine troop and am looking to get my A&P after getting out next month! I appreciate you listing all of the options to pay for the tests because I won’t be eligible for the GI bill, but I might be eligible for the VR&E. I’m so excited to work on planes as a civilian!

@BurnoutsAndRotorblades 3 жыл бұрын

I believe you have to have GI Bill eligibility to qualify for VR&E.

@josephulloa626 Жыл бұрын

To qualify for VR&E you must have a disability of 10% or more. Also, the career path/schooling you choose for VR&E must not worsen your disability.

@dick8997 4 жыл бұрын

Just enrolled in aviation institute of maintenance. Doing airframe right now. Shit is fucking awesome never been so excited.

@donald8354 Жыл бұрын

That school is private. 18 month program.

@email7191 3 жыл бұрын

Great video! I knew I got a real B shred vibe from the cotter pin install on your ball joints. Are you on the H-body forums at all?

@BurnoutsAndRotorblades 3 жыл бұрын

I am on the H-body forum. B-shred. That’s going back. They changed it to H-shred after the CV 22’s came on board. Thanks for watching the videos.

@joelmwaniki7347 2 жыл бұрын

Prepware is also helpful in Kenya..I used it on airlaw and passed

@AmanKhan-lw5rt Жыл бұрын

Thank you boss , very good information, plz make a video for procedure to be followed by Non US citizens.

@egamez1 3 жыл бұрын

To pass all three written tests use Prepware. To pass the oral tests use the Jepessen (Boeing) books.

@donovanharbuck6493 2 жыл бұрын

This video needs to be at the top of A&P search results

@BurnoutsAndRotorblades 2 жыл бұрын

Do all those things every youtuber says to do to get me there. . . like, share, subscribe, and thank you for your comment!

@marmosletsplays8848 2 жыл бұрын

Just got my A&P!

@donald8354 Жыл бұрын

Good for you.

@cjtcabrera1893 4 жыл бұрын

Thanks boss

@joedaviss9448 Жыл бұрын

Hey man great video. Bakers school of Aeronautics is located in Lebanon TN. They have a 2 week course that will get a person through all 3 of their written test and the oral and practical. They have a 99% pass rate

@GhadSpeed Жыл бұрын

I’m located in NC. There’s been a few Techs who got their sign offs and went to go test there at bakers. All came back with licenses 🪪

@gd1lla226 Жыл бұрын

How true is this I’m enrolled for April of this year but I’m located in California what makes this so different from studying yourself ?

@BurnoutsAndRotorblades 4 жыл бұрын

Read this first: I have a lot of questions about similar items. The links below hold the answers to most things. If you don't think your answer can be found in here, I will do my best to get you the correct one. FAA Mechanic FAQ: www.faa.gov/mechanics/become/ FAA Basic Mechanic requirements: www.faa.gov/mechanics/become/basic/ FAA Mechanic Experience requirements: www.faa.gov/mechanics/become/experience/ FAA testing requirements/materials: www.faa.gov/mechanics/testing/ FAA FAR 65.71 Basic mechanic requirements: www.ecfr.gov/cgi-bin/text-idx?SID=954b7cf21d5cb94dc1826e1fb5ed5796&mc=true&node=pt14.2.65&rgn=div5#se14.2.65_171

@brianmiranda1284 2 жыл бұрын

I am a power plant guy in the Navy, who is authorized to sign off for the airframe portion for the “ticket”. Thank you!

@BurnoutsAndRotorblades 2 жыл бұрын

Call your local FSDO and ask them.

@justinvanevenhoven8789 Жыл бұрын

One thing to note, some schools require you to test for both ratings. The one I went to had that requirement.

@THECARSHOWFEED 4 жыл бұрын

Not many aviation folks out their. Cheers! I still remember them damm deficiencies lol. What a nightmare

@DriversTherapy Жыл бұрын

Hello, which A&P school did you go to in California? Thanks.

@BurnoutsAndRotorblades Жыл бұрын

I went to the test prep course at the Riverside, CA airport. Can’t remember then name at the moment

@tekendragautam1251 3 жыл бұрын

sir, a warm greeting from Nepal. you please make a video about how difficult/easy is the aircraft mechanics course and to get the FAA license? I pray to God for your good health.

@noah5889 4 жыл бұрын

i have an interview at an aircraft mechanic today. i don’t have any certs but am really interested in getting my a&p for when i become a pilot

@christinacortez6591 4 жыл бұрын

Great video and very informative for what I was looking for. I had a question see what you recommended. I went to school for A&P finished it but never went for my FAA exams. Here we are 10 years later and I want to get back to getting the license. For someone like me that has been out of it for 10 years and need to refresh prior to taking the exams do you recommend the A&P refresher courses. Also not sure if my experience currently might get me to qualify for taking the exam even after a refresher. Again I’m still looking for more information before I pay a school for a refresher course and that didn’t help me. Thanks kindly in advance for your time and feedback.

@BurnoutsAndRotorblades 3 жыл бұрын

If you got your tickets signed when you completed the school the take a refresher and take the test. If you didn't get your tickets signed, you might have to start over.

@naamya2254 2 жыл бұрын

Hi. Great video, thank you for uploading and sharing the information. One question does the license has a validity or due date? Do you have to renew it from time to time?. Thank you.

@BurnoutsAndRotorblades 2 жыл бұрын

No renewal, but there is a caveat in the law that says you have to be actively using it to be considered certified.

@naamya2254 2 жыл бұрын

@@BurnoutsAndRotorblades many thanks. Clear

@joshualyons8423 5 жыл бұрын

What were your thoughts on AvTech in California?

@jorgevera3937 4 жыл бұрын

Great video brother! Just joined the Air Force doing flight line avionics and want to get started on getting my A&P to work for a company like Lockheed or Northrop. I just got started and I want to know what I should do to get ahead so when it comes time to take the test I can hit the floor running. It says I’ll qualify for airframe credible experience and I’m on a 6 year contract

@rayanaltowayan9558 4 жыл бұрын

Great! How did you join the air force? straight after high school?

@xenobell2475 2 жыл бұрын

@@rayanaltowayan9558 go to your local recruiter, do well on the asvab, be in decent shape, pass boot camp and boom you’re in the airforce

@bigdoogie6132 2 жыл бұрын

Thanks for the great content. I spent 4 years in the Navy as an Aviation Structural Mechanic and also worked on H-60s. Good bird. I’ve been separated for 3 years now and recently decided I want to rejoin the aviation world and get my a&p. Wondering if you can recommend any online courses that I would be able to do at my own pace? Trying to juggle work, family, etc so looking for something I can more or less do on my free time. Any suggestions would be greatly appreciated

@BurnoutsAndRotorblades 2 жыл бұрын

the prepware is a good place to start. you can knock out a few questions every day while dropping the kids off at the pool. After that, you'll need to look into a test prep course.

@matthewallen6875 2 жыл бұрын

were you able to get both as an AM or only airframe?

@blakesnider3501 3 жыл бұрын

I’m a hh60 crew chief. Separating in October. I’m going thru the jsamtcc programs since the AFCOOL doesn’t cover the cost anymore. Do you know the school in Georgia that does the crash course?

@ralphwright36 5 жыл бұрын

If someone wants a real A and P check local community college, Jacksonville State College! A and P and a 2year degree with it!

@thekill2509 3 жыл бұрын

At a cost of what? Our local Community College has a two year AMT course, it's $8000 per year!!!!

@Leo1234So 2 жыл бұрын

Hello, and thank you for this wonderful video! Just one quick question, is there a list of tasks required to get your powerplant side qualified? If so, how do i find this list?

@BurnoutsAndRotorblades 2 жыл бұрын

The FARs are a bit ambiguous (ecfr.io/Title-14/Section-65.77) on the experience requirements. However, it would be a good idea to look over the powerplant handbook here for a general idea (www.faa.gov/mechanics/become/test_requirements/). Each FSDO has their own requirements, so call your local one and ask if they have a list that they want to see before signing off your 8610-2. Some are there to help, some think they are the gatekeepers to the A&P mechanic universe. I also talk about the differences between FSDOs in this video: kzfaq.info/get/bejne/a9yKiqp6l8m7cmg.html

@jakeb5010 Жыл бұрын

My ADHD brain caught something shiny in the room. I only had to watch two times! Thank you

@haonancheng8678 3 жыл бұрын

Thank you for all the great information, I’m active duty Navy, and I have worked on H60R for 6yrs so far, And I’m think about to get a A&P license and and find a job outside the Navy. I do have both power plants and airframe USMAPS, do you think I could use those certificate to get the ticket signed to go straight to take test without training?

@BurnoutsAndRotorblades 3 жыл бұрын

I would still do the training and prep course because you don't have any small GA experience. Trust me, take it and at some point in the training you'll understand what I mean.

@matthewallen6875 2 жыл бұрын

Were you an AM or AD?

@TheStupidinc 4 жыл бұрын

I’m going to go to that same school in riverside! Any advice or things you wish you had done before you went?

@BurnoutsAndRotorblades 4 жыл бұрын

Read all the stuff I have put in the pinned comment. It is super boring but It will help.

@Twistedstar0320 4 жыл бұрын

Hey bro, I just contacted the fsdo and got scheduled to go get my tickets signed to take the test. I'm in the navy and they sent me an email with the 8900.1 v 5 attached to it. Just looking at it it feels a bit overwhelming. They guy on the phone basically said I'll send you this email and come in at 0900 on the 11th. Do you know this form? What am I looking at here and what do I need to do?

@Munky332 3 жыл бұрын

Question: I was Comm/Nav previously (Now 2A2 I believe? Used to be 2A5), but crosstrained to a Flight Engineer; When they talk about experience recency, I'm assuming that means for the specific AFSC? Though I probably actually know more now than I did as a dirtbag A1C/SrA after 10 years flying and more than 3000 hours lol. Problem is I don't know what I have for documentation anymore, as they switched from 623's to TBA right before I cross trained. Wondering if I might be able to get with our maintenance guys and get signed off on some tasks.

@BurnoutsAndRotorblades 3 жыл бұрын

Maybe you can. It might be difficult to get the FSDO to sign you off without those training records. Some are willing to talk with you about your experience but most want documentation. Remember, they are in a documentation heavy career field.

@juliangonzalez5437 5 жыл бұрын

It is not necessary to be US resident or citizen. Non US residents can get A&P certificate too, providing same experience requirements as US residents/citizens do.

@TheFunnyBone5 4 жыл бұрын

I’m currently in tech school for electrical and environmental systems in active duty USAF. I’m very interested in the a and p license.

@alexkennedy7770 2 жыл бұрын

As a prior 7-level/X-qual’d F-16 E&E guy myself, I’ve got one piece of advice: Work with the Crew Chiefs and Engines dudes. Get them to sign you off in TBA. Get APU/Eng run qual’d too. You’ll be fine with TBA/CFETP documents to get your A&P as long as you actually know what you’re qualified on!

@moof8851 4 жыл бұрын

right now im just trying to figure out what textbooks are worth buying. The army wont pay for any books until i get my tickets. and i guess im worried that i will do poorly in the ticket interview not allowing me to get passed for both airframe and powerplant tests.

@BurnoutsAndRotorblades 4 жыл бұрын

Reading the resources I have in the description is the best source of information.

@bbltd.3154 2 жыл бұрын

I guess I'm just gonna work on cars!

@robertdeull 5 жыл бұрын

If i have my CCAF in aviation mx, would i meet the requirements for the collegiate A&P? would i be applying for collegiate over vocational? want to get my A&P this year. very helpful video, man thanks so much.

@BurnoutsAndRotorblades 4 жыл бұрын

That's not how it works. The Collegiate versus vocational are both A&P vocational programs you have to attend. One is just with a "degree granting institution" (college) and one isn't. This is another situation where the CCAF doesn't do you any good. In fact, it hurts you because you can't normally use MilTA to pay for associates level classes once you have completed the CCAF, or any other associates degree. If you are an active duty maintainer, the path is to get your tickets and take the A&P prep course. If you can't get the tickets with your AFSC and TBA records, you may have to do the JSAMTCC program. I hope this all helps. Good luck, and if you have any more questions don't hesitate to ask.

@alrod9353 4 жыл бұрын

I got my tickets signed back in 2015 but never started or took a written test yet. My understanding is that my tickets are good until I take a written test and then my 24 month timeline starts, is this correct?

@cmp6203 3 жыл бұрын

Correct, sir, tickets will always be good. Keep extra copies just in case.

@tracyhall9262 3 жыл бұрын

I have been in aviation directly for a total of 10+ years. I am a machinist, running 3&5 axis and also working in a true machine shop. Ive just turned 50 and really want my A&P License, should have long ago. I'm not ex military. Is a pell grant the only aid available for me?? It seems to me the 1st thing I should do is see what tickets I can get signed off by past employers.....? Thank you for your service and the video! Hope to hear from you! Tracy Hall

@BurnoutsAndRotorblades 3 жыл бұрын

Honestly, you'll probably do a lot better as a machinist. But if you want to go down that path, you can use the Pell Grant if you qualify. You have to find a college near you that has an A&P degree program. vocational schools usually do not have access to federal education assistance. College and vocational programs are usually 8-5 because the FAA program requirements are a minimum set of hours. They usually can't be done with a full time day-job, but programs may vary. You probably can't get tickets until you complete the program, or have 30 months experience within the proceeding 3 years. That is dependent on your previous experience. Maybe finding a job as a machinist in an aircraft production or repair capacity might be the best track to an airframe license. Working for an engine manufacturer might get you to the powerplant side of the house as well. I'm sorry to be a Debbie-downer, but the FAA makes it pretty difficult to get into the career-field unless you commit, which is hard to do without giving up on everything else. That doesn't mean there isn't a way, I can only speak from my experience. If you do find another way to make it happen, I would love to hear about it so I can pass it to the next person.

@PhilsGaming 2 жыл бұрын

Could I use my USMAPS certificate? Im currently working on it right now and almost done with my 5000 hours.

@matthewallen6875 2 жыл бұрын

I was an AT in the navy but i mostly worked in line shack and configurations. so i’ve got more airframe experience as I only spend 2 days in avionics. I’ve worked at Boeing as a flight line mechanic for over 2 years now but the only experience that I have with engines is pickling them from preservation and then reactivating them. Do you think the FAA will recognize any time towards power plant?

@BurnoutsAndRotorblades 2 жыл бұрын

The best advice I can give is to get with your local FSDO office and see what you need to be signed off. They are pretty subjective.

@anuhmull 5 жыл бұрын

Sub'd and shared

@anuhmull 5 жыл бұрын

@@BurnoutsAndRotorblades It's SSgt, I work for a living -Jessie

@vaaasgaming6872 3 жыл бұрын

Can u get faa a&p if u are colorblind?

@strata8383 3 жыл бұрын

Have you heard anything about the School's "AIM" or "MIAT"? I might be attend one of them soon. Just not sure which one.

@BurnoutsAndRotorblades 3 жыл бұрын

Negative. I have not heard much about any specific schools. If you have anything to pass on please feel free.

@strata8383 3 жыл бұрын

@@BurnoutsAndRotorblades Ok, I will Keep you posted on what which one I attend and my Experience there.

@strata8383 2 жыл бұрын

@@BurnoutsAndRotorblades Ok, I have been attending One of the schools for a few months. Its Basically just Paying money to Kill Time in a FAA approved School. Now I got "PrepWare" I did have a lady form a company tell me they don't care if you have a degree. Just the A&P..

@bluecavemen Жыл бұрын

Good information by what your saying it looks like i wouldn't qualify for this. First i don't want to go to school ( just loans i don't need to add ) I'm mostly self thought when it comes to test all i need is a book or prep exam. Well i do a question i hope you help with your experience and knowledge . I would like to get into the unmanned aviation ( im not talking about those small buzzing quad captors ) field i know there going to be dozen of job opening over the next few years that's going to pay very well. Beside being in the military ( i never been in the military ). i did talk to a person in Europe she saying it be pointless to get a FAA license. And each UAV helicopter are build different that would mean i need special training on each UAV. Since he doesnt know anything about the US on UAV what do you think would be best to start getting my foot int he door if you anything about this

@BurnoutsAndRotorblades Жыл бұрын

There are a lot of UAV companies that will train you. They are typically looking for mechanic experience, and an understanding of how UAVs work. I would recommend buying a small RC airplane and starting to learn the parts and how it works. Then just scale up from there.

@thatredcam Жыл бұрын

Hey! So I’m actually new to this career path. I’m in the process of enrolling into a school to get my a&p license. At my local community college, it is significantly cheaper than a Trade school. I was wondering if taking the community college route is a good idea? Given than they don’t offer hands on training and most employers (from what I’ve seen) require some sort of hands on experience on top of your license. What are your thoughts or suggestions? The cost is about 20,000$ difference

@BurnoutsAndRotorblades Жыл бұрын

The hands on training is everything in a hands on career field.

@LimabeanLiving 3 жыл бұрын

Did you attend the AV Tech in riverside?

@BurnoutsAndRotorblades 3 жыл бұрын

yes

@Karina_Engr 4 жыл бұрын

I have a question for everyone. What did you all use to study for the writtens? Prepware (app &/or books), AvTek(or however you spell it, aka the “cheat schools”), Kings course, &/or other? I’m studying from the prepware books and it’s brutal, and dry. Thanks!

@Karina_Engr 4 жыл бұрын

BurnoutsAndRotorblades thank you Sir. I got my drone pilot license, and it wasn’t THIS bad. Sometimes we all need a little validation from someone who’s walked that path. I appreciate your time. -K

@shanice9229 3 жыл бұрын

So I'm a senior in high school (a girl and short) do you have any advice on where to go from here. I plan on going to school for it but still I need all the advice I can get

@BurnoutsAndRotorblades 3 жыл бұрын

Being a girl and being short has no bearing on whether you can be a mechanic. if you need proof, look up Faith @howtohelicopter on instagram. Now, being in high school. . . You have two options, military or technical school. There is a lot to know about both. If you have set on the school route, I would ask around about different experiences folks had with different schools. I'll be honest and say I don't know much about that route because my experience is all military. Because females make up a pretty small portion of overall aircraft mechanics, I would bet that other females that have gone through that process would be the best to get advice from. Don't think I'm sluffing you off though, If I had some real advice to give, or you have more questions, shoot! If i don't have an answer, I'll find someone to give you the right answer. First reach out to the girl I named above and see what advice she has to offer.

@viperg13 5 жыл бұрын

Hey someone told me they went to the school in riverside and only took for the oral and practical 4 hours and they were done and they also said it was so easy cuz the school basically dumbs it down so much is this true I’ve asked someone else and they told me the exact same thing but idk this to be true it’s the same prep school you want to to get ready for the test the one you said you went to in riverside how does that work if it is that way at all?

@eazypeazy7743 4 жыл бұрын

viper Gonzalez do you know what the school is called in riverside ?

@JosueHernandez-nj9bc 3 жыл бұрын

Can you earn the certificate online?

@DNaWhoot 2 жыл бұрын

Quick question, do I have 24 months to finish my tests after I finish school? Or is it 24 months from when I take the first test

@BurnoutsAndRotorblades 2 жыл бұрын

from first to finish testing is 24 months.

@Josasil454 Ай бұрын

Nice video congratulation. Im a Brazilian military so I would like to know how could I fill the information about my experience in the form? could you help me

@BurnoutsAndRotorblades Ай бұрын

The path for a foreign A&P is very different from what I have experienced. I have looked in to it a little bit. Enough to realize I'm not the best person to ask.

@christianboyd2124 5 жыл бұрын

Thank you for the video. By the way, I'm in an a&p school. I have 6 months left til Graduation and I want to ask how hard is the oral and practical?

@dick8997 4 жыл бұрын

How are you making out? I just enrolled in school almost done first week. So far pretty cool

@johncollins6023 5 жыл бұрын

I went Colorado Aero Tech. Never got a job.

@viperg13 5 жыл бұрын

John Collins did you test?

@christianchappell-rottenbe1495 Жыл бұрын

I work at lockheed, what information would I need to show the fsdo to get my 8610-2 forms so i can go take my O&P's?

@BurnoutsAndRotorblades Жыл бұрын

Call and ask your local FSDO. they all have their own way they want things done. It might be easier if they are familiar with where you work and what you do.

@CHASA 2 жыл бұрын

I want to get into aviation, can I get an a&p license through an apprenticeship?

@BurnoutsAndRotorblades 2 жыл бұрын

I did a collab with Jon from Fly8MA where we talk about that. kzfaq.info/get/bejne/a9yKiqp6l8m7cmg.html

@kendall8954 4 жыл бұрын

What sre some funding sources for civilians. And do airlines hire those without the licence.

@BurnoutsAndRotorblades 4 жыл бұрын

Nathan Kendall I will first day, the funding sources for civilians are the same as for military, the military just ads some funding sources. So you have all the options provided by FASA, private loans, and scholarships. For vocational flight there is really nothing except private loans through programs like ATP. For degree programs, once again the funding options are as listed above but there is more available than for Vocational Flight training. Airlines are starting to look at zero-to-hero programs like exist in eurpoe. Lufthansa has one in Phoenix. Other than that, it’s a pay-to-play system. You put out close to $100k and hope to get hired at the end.

@elievalkyrie 2 жыл бұрын

I attended a 2yr AMT course in the Philippines and graduated too. Also have more than one year AMT experience there. Does anyone know if can I take the A&P test here in the US with those qualifications without going to an AMT school again?

@BurnoutsAndRotorblades 2 жыл бұрын

I looked in to it without finding a concrete yes or no. The best answer I can give you is, contact your local FSDO

@ronaldorivera3597 4 ай бұрын

What is the name of the school or course that you mentioned in River Side CA?

@BurnoutsAndRotorblades 4 ай бұрын

AvTech Exams

@GooselinoTheAviator 2 ай бұрын

So out of curiosity, my end game is to be to go the ATP route, would it be beneficial to obtain my A&P license?

@BurnoutsAndRotorblades 2 ай бұрын

I have not found an advantage to having an A&P as a pilot.

@yeudylove2820 4 ай бұрын

can i get it in the reserve?

@derekgiltenan5423 2 жыл бұрын

Hey, Looking to complete A+P license... have airframe for 20plus years.... was hoping to get back over to finish powerplant side......I working as Licensed engineer in Ireland working on 737,757, 767, Airbus 318/19/220/21 and neo. What do i need to do now?

@BurnoutsAndRotorblades 2 жыл бұрын

The process for non-citizens is very different and since I have not actually been through it, I won't pretend like I know. What I do know is, if there is a section of the FAA F.A.R. that covers this.

@reuben2264 Жыл бұрын

Happy new year sir Can I use my Foreign military experience logbook to write the rest . I have my Nigeria aircraft license but I can’t use it here in US hw do I go about getting d FAA license thank u because I really some guide here

@BurnoutsAndRotorblades Жыл бұрын

I have had a lot of foreign folks ask me about this process. I am sorry, but I posted this video because I went through this process. I don't know enough about the foreign A&P license process to give any solid advice.

@reuben2264 Жыл бұрын

@@BurnoutsAndRotorblades thanks for d reply

@DoTs_Vaporized 5 жыл бұрын

I just turned 17, 2 months ago and I wanna start learning about being an aircraft mechanic. I wanna go through the navy but I'm worried about the asvab and what score I need.

@davebruzdzinski424 4 жыл бұрын

I’ve been out for 15 years, and I’m 3 months short of both ratings... what’s my best plan to get my A&P?

@BurnoutsAndRotorblades 4 жыл бұрын

I hate to be the bearer of bad news, but it's kind of an all-or-nothing deal. The 15 year gap is also a a deal killer. You are basically looking at all the same options as someone getting into it from the beginning. An aviation maintenance school would be my first option, and if not, working in an aircraft repair station. Getting a job at an aircraft repair facility that doesn't require an A&P might be easier depending on your last 15 years of work experience. The FAA FAR: www.ecfr.gov/cgi-bin/text-idx?SID=954b7cf21d5cb94dc1826e1fb5ed5796&mc=true&node=pt14.2.65&rgn=div5#se14.2.65_171

@davebruzdzinski424 4 жыл бұрын

BurnoutsAndRotorblades I figured as much, thanks for the feedback!!!

@bancric3484 3 жыл бұрын

Is there any option to get AMP license from ourside of USA?

@BurnoutsAndRotorblades 3 жыл бұрын

You have to find an FAA testing center outside the US. There is a provision in the CFR for non-US citizen/residents to get their A&P.

@hlhl2691 4 жыл бұрын

If you get your a&p while your still in the air Force and you get out. How much can you except to make at your first "real" civilian job?

@hlhl2691 4 жыл бұрын

@@BurnoutsAndRotorblades oh nice! I was a KC-135 crew chief for 6 years ( Isochronal inspection for 5 and flight line for 1) and I've since cross trained to a different career field. I'm currently looking to keep my licence up to date since my switch. but before i got accepted to cross-train I had an interview with Cessna in Wichita, Ks for a ROM Technician, and they wanted to start me at 20$ an hour. I thought this was fairly low considering I have a bachelors degree, two Associates, an A&P licenses, a Ground radio operating licenses, and 5 years of inspection experience... lol but i wasn't sure what to expect. I was hoping for at least 25$ an hour. The low starting wage and the rarity of employer call backs, when i was looking for a job, prompt me to stay in the service and go a different route (cross-train).

@BurnoutsAndRotorblades 4 жыл бұрын

That is a very broad question and depends completely on your experience and qualifications. The best way to answer your question is to share my experience. I made $32/hr day one of getting out after 10 years AF experience as a Jet Engine mechanic with a modest amount of GA experience and extensive experience on both the C130 and HH60. But I was hired by a company who had a lot of aging jet engines and I was a hot commodity there in Las Vegas which has the highest starting A&P wage in the country. I've since moved on and make less hourly but more annually. It was likely location and maybe a bit of timing. The company I'm with now starts new A&P's, straight out of A&P school, out at $26/hr. I know there are many like that. General aviation doesn't pay much. you are compensated better somewhere where your other assets; Airframe experience, understanding of military T.O.'s, and Security clearance come in to play.

@LectricLetus 3 жыл бұрын

Lol- "death by powerpoint"

@lacboiatl 11 ай бұрын

C 130 avionics civilian for 12 years......... and i swear i hate our pac folder doesn't transfer to faa language so I have to really take a 18 month course?

@BurnoutsAndRotorblades 11 ай бұрын

If you can find and FAA FSDO inspector that is willing to sign off your 8610-2 with you military training records as proof then no. That is exactly how I did it. He was a former C130 engine guy who understood what that documentation means.

@Darkushy Жыл бұрын

What's the name of the prep school in California that you attended?

@BurnoutsAndRotorblades Жыл бұрын

I don’t remember but it was at riverside airport.

@kabalfujiwara4525 5 жыл бұрын

Is it true you can test for "general & powerplant"oral & practical. Then take the airframe oral & practical ? Also any details on testing with AVtech in Riverside CA?

@cenzolyksitruff 4 жыл бұрын

@@BurnoutsAndRotorblades 2 years

@cenzolyksitruff 4 жыл бұрын

well, 2 years per rating sought FAR part 43.9 I believe. Its not a license though, its a certificate lol

@cenzolyksitruff 4 жыл бұрын

BurnoutsAndRotorblades haha of course!

@BurnoutsAndRotorblades 4 жыл бұрын

You can take the airframe and power plant tests at different times. From the day you take the written you only have a year (I'm pretty sure it's only a year) to take the oral and practical. So, keep that in mind. All I'll say about AvTech is, it worked for me. It's not a glowing review, but it's all about how much work you put in.

@BurnoutsAndRotorblades 4 жыл бұрын

@@cenzolyksitruff there always has to be one. . .

@evaristogabriel8208 3 жыл бұрын

I am studying aerospace engineering Do I need an A&P certificate to become an aircraft mechanic

@BurnoutsAndRotorblades 3 жыл бұрын

You need an A&P to legally sign off aircraft repairs. You can work with a local A&P to gain experience without a license.

@evaristogabriel8208 3 жыл бұрын

@@BurnoutsAndRotorblades thank you... I guess I will just have to obtain the license after my four years... I just thought the maintenance sectors in aerospace engineering get the same study.

@royalwilson6640 4 жыл бұрын

Im attending school in May 2020 does anyone have the books I will need for a good price.

@alditotv5307 4 жыл бұрын

Royal Wilson contact me IG al2daniel

@manuelroman6456 4 жыл бұрын

@@alditotv5307 hey

@HK-dh9tb 4 жыл бұрын

I'm a 15D, Aircraft Powertrain mechanic active duty in the Army. All I work on are Rotor systems and Drive systems. How do I get the knowledge to pass the airframe and powerplant portion of the practical exam without going to an A&P school? Will I really learn enough by just learning from the sheet metal guys and engine guys at other shops? I'm a little afraid. I was thinking of just using my GI bill to sign up for an A&P course at a local college but you said you don't recommend that. How would I get the required 30 months experience then?

@BurnoutsAndRotorblades 4 жыл бұрын

Once you have 30 months experience working on aircraft, not including training, you can try to get the local FSDO office to sign off your tickets, 8610-2. Before they will, they will take your job code, 15D, and bump it against the FAA list that shows what experience crosses over to with regard to Airframe and/or Powerplant. Working with sheetmetal and engine guys, and more importantly getting them to document your training, will help you if you don't qualify for one of the certifications, but that is all only for the tickets which are only permission to take the test. In your case I would work with crew-chiefs for experience on tasks applicable to all aircraft like brakes, wheels, tires, lights, electrical, rigging, and being taught how to remove squibs wont hurt. Once you have your tickets signed off, then you start preparing for the test.

@luisfernandopalmareyes532 5 жыл бұрын

Thank’s is very interesting your videos. Actually i am in a process to get A&P Mechanic License. I have endorsement in August, so i have been studying very hard english especific. I would like to have a tool for my mac book. I have ASA Prepaware in my iphone but i would like to have a tool study in my mac too. Could you facility me one tool study for my mac book?, Thank’s for you help.