How to Glass Bed a Precision Hunting Rifle

How to Glass Bed a Precision Hunting Rifle | Gunsmithing

Рет қаралды 57,800

Күн бұрын

Wyoming Gun Company's Gunsmith Geoff demonstrates the process of Glass Bedding a Precision Hunting Rifle to an HS Precision Stock with an aluminum bedding block pre-installed. He walks us through his process to ensure the proof research barrel and Remington 700 bolt action receiver have a clean and precise bedding to remove all the play during the amendment processes.
For inquiries contact Wyoming Gun Company at gunsmith@wyogun.com

Пікірлер: 23

@TedMonty 3 жыл бұрын

You have a very sincere presence on camera, nephew...something that many can never acquire. And your skillset? Wow!

@jasonwatkins4277 3 жыл бұрын

Really good video series. Can't wait to see the finished product.

@larrywalden626 6 ай бұрын

you could have shown more of the milling process honing out the stock. i would liked to seen your finish and exactly how you achieved machining it out with a small end mill cutter.

@vikp6115 2 жыл бұрын

So you squeezes all that epoxy into the threads ? And usual those hoses goes through the action all the way where barrel threads are and u just epoxy those threads ? That's going to be fun to take that barrel off

@nailed2thecross01 Жыл бұрын

Have you made an updated video? Can you explain why others tape recoil lugs?

@freddyvice8822 Жыл бұрын

Please do a video on pillow and glass bedding a Sako 75 and 85 thanks

@frannieswannie6046 2 жыл бұрын

nice

@terryraymond3591 Жыл бұрын

Did u put anything on the end of the action and barrel to prevent it from sticking in the stock?

@jdubrr35 3 жыл бұрын

Can you do a video on pillar bedding also?

@wyomingguncompany3327 3 жыл бұрын

That's a good suggestion! Something we'll look into doing in the near future. Thanks for watching!!

@mr.mr.3301 Жыл бұрын

How do you keep the bolts from getting glued in

@austynscruggs6867 7 ай бұрын

Release agent on threads

@nj-bz8pv 2 жыл бұрын

Some people tape the front of the recoil lug. Is the a reason you don’t do that?

@nailed2thecross01 Жыл бұрын

Was going to ask the same question, have you found out why?

@lanceschul 2 жыл бұрын

Why wouldn’t you torque the action screws? I was assuming it would be best so you can replicate the fit with proper torque.

@wyomingguncompany3327 2 жыл бұрын

My approach to bedding has changed slightly since making this. I no longer even wrap the bedded rifle with surgical tubing anymore. I found it squeezed out too much bedding compound as it's setting up. Screws are only finger tight after setting it in. Provides for a much better result and then the screws are properly torqued for final assembly. Thanks for watching!!

@umpquablades 2 жыл бұрын

A stress free bedding job is what you want which is the reason you don’t want to tighten the screws down tight. I only finger right the crews.

@rwolfhaus1234 3 жыл бұрын

Take a more measured approach than other like videos. Good job!

@NTHunt Жыл бұрын

So glad i have a milling machine 😒

@wyomingguncompany3327 Жыл бұрын

email gunsmith@wyogun.com if you're needing any work done! We are happy to help!

@JoePep223 2 жыл бұрын

Nice if you showed the whole process....

@wyomingguncompany3327 2 жыл бұрын

We do show the whole process! Watch all the videos and BOOM you got the info you seek!

@bobgyetvai9444 Жыл бұрын

You didnt bed all along the sides of the action to prevent movemen further enhanceing the job . Even snugged that reciever will distort slightly defeating the purpose of stress free bedding . A dial indicator proves my point . If you say its a hunting rifle not a target job i remind you targets dont bleed . No pillars either so it wont ever truly be stress free or consistantly torqued . You are capable of far better than this . Sorry.......